Adam Savage's Favorite Tools: Workshop Utility Apron + Everyday Carry!

$37 workshop apron: amzn.to/3fHKdSs
Adam's Everyday Carry in his apron:
Papermate Sharpwriter #2: amzn.to/2xSMaKL
Pica Pen: amzn.to/2TcSep9
Whiteout Pen: amzn.to/2YSrvSg
Small Machinist Square: amzn.to/311GLLq
Flush Cutters: amzn.to/3csoGuY
Dial Calipers: amzn.to/3fGRSk4
Giaco Maker Knife: giaco.com/prod...
As you might've seen in Adam's recent videos, one of the changes to his shop workflow has come from his use of a utility apron for carrying his essential tools like Pica pen and dial calipers. Adam talks about what changed his mind about wearing a shop apron, what kinds of tools he carries on it, and how it's changed the operating procedures for his builds.
Shot by Adam Savage
Disclaimer: Tested may earn an affiliate commission when you buy through the links here.
Subscribe for more videos (and click the bell for notifications): www.youtube.com...
Tested shirts and more: teespring.com/...
Twitter: / testedcom
Facebook: / testedcom
Instagram: / testedcom
Discord: / discord
Tested is:
Adam Savage / donttrythis
Norman Chan / nchan
Simone Giertz / simonegiertz
Joey Fameli www.joeyfameli.com
Gunther Kirsch guntherkirsch.com
Ryan Kiser / ryan.kiser
Jen Schachter www.jenschachte...
Kishore Hari / sciencequiche
Sean Charlesworth / cworthdynamics
Jeremy Williams / jerware
Kayte Sabicer / kaytesabicer
Bill Doran / chinbeard
Ariel Waldman / arielwaldman
Darrell Maloney / thebrokennerd83
Kristen Lomasney / krystynlo
Intro bumper by Abe Dieckman
Set design by Danica Johnson / saysdanica
Set build by Asa Hillis www.asahillis.com
Thanks for watching!
#AdamSavage #FavoriteTools #ShopOrganization

[@tested]

This is Adam's $37 workshop apron: amzn.to/3fHKdSs Adam's Everyday Carry in his apron: Papermate Sharpwriter #2: amzn.to/2xSMaKL Pica Pen: amzn.to/2TcSep9 Whiteout Pen: amzn.to/2YSrvSg Small Machinist Square: amzn.to/311GLLq Flush Cutters: amzn.to/3csoGuY Dial Calipers: amzn.to/3fGRSk4

[@michaldobrzyn]

I love little videos like this that explain the tools someone uses and why. Thank you! May I ask why dial callipers over digital callipers? Is it for aesthetic reasons?

[@BROON71]

Thanks for sharing the brand of apron that Adam is wearing, Norm..

[@CountDoucheula]

@@michaldobrzyn I would assume reliability. I've had 3/4 digital calipers shit the bed over the years, but a well made, well taken care of analogue caliper should last a good amount of time.

[@_TheDudeAbides_]

@@CountDoucheula What do you think of the ones with no dial but just lines?

[@tested]

@@michaldobrzyn Adam did a video about calipers! kzbin.info/www/bejne/aaWTk2p9m655nLM

[@ilias1419]

i love these barely edited videos, they feel a lot more realistic and personal.

[@ilias1419]

@@stewartstewartstewart You can't really compare the professionally shot/edited videos with these ones, for bigger more elaborate projects the effort pays out in my opinion. We need both!

[@larsmark]

Same here. I have not watched much tested but since the lockdown and these type of videos I watch it more than any other channel. Feels a lot more personal.

[@mlubecke]

Elias K me too !!!

[@sallylu4529]

Thanks for share! I found this hot canvas apron in promotion now! maybe you can view and try? Hope help for you! www.amazon.com/gp/mpc/A3AF4TJ34N4T71

[@DisabledPrepper]

They got me through University in Lockdown!

[@mh-oh8kf]

I must say, these shop videos that have been coming out on (an almost) daily basis, have been some of my favorite content ever on tested. Keep them coming :)

[@tested]

Appreciate that!

[@kwazhims3lf]

@@tested no, thank you

[@BlankofMaterial]

I bought a particularly long apron then cut off the bottom 6" of leather and have been using it to make custom pockets riveted to the chest area. As I find things I want on my person I create a pocket. For instance the machinist square gets a lot of use so it has it's own slot to hold the blade for easy access.

[@k001daddy]

I just got Law & Order PTSD when he banged the little thwacker. 4:03

[@HitTheRoadJack123]

dude, i was about to comment the same :')

[@k001daddy]

@@HitTheRoadJack123 Lol... dig the H2G2 icon!

[@rileyromano3181]

We all did

[@HitTheRoadJack123]

@@k001daddy I am a hitchhiker, so it fit perfect :')

[@salukispeed93]

And these are their stories

[@FramesFTW]

I have to say there was something aesthetically great about a guy just in jeans and a t shirt being master of a crazy complex and intricate shop but I can definitely see the benefits of the apron.

[@calumnichols]

Isn't that weird? I'd not thought of it until this video but so much of my perception of Adam is this crazy genius running out of frame to grab tools and materials that this level of organisation looked... wrong

[@Oaty86]

I love this organic style of videos, it is refreshing compared to the usual over-edited youtube content. It is informative and natural, including moments where you disappear briefly to get a bench.

[@RickSolid1]

You are right Adam, I swapped to an apron, in my home workshop. I reused an old safety harness with sherpa lined shoulder straps for better feel. I enjoy the ritual of doning it as much as working with it.

[@ehleroo]

"Needed to be localized to my body." So shop aprons are the Iron Man Nanosuit of the maker world. Got it.

[@cbobwhite5768]

Posting here because comments were turned off on today's live stream. I missed notification about the live stream and turned it on, while you were in the middle telling about dropping a small part, to find a previously dropped part. One trick I use, when I've dropped something small, especially in my kitchen, with the vinyl floor, with it's pattern of blue and gray stones. First, I turn off the overhead lights. Then I turn on a bright flashlight and hold it flat on the floor. I sweep the light in an arc and when you hit the fallen object, you may not see it, but you will definitely see the long shadow it causes.

[@kirktate647]

These tool tip vids are the bomb. Love 'em, love 'em, love 'em. I might never build a particular thing that Adam has built, but the *tools* - immediately applicable.

[@BrianTheBee]

The utility knife is made by Giaco if anyone is wondering.

[@stsnoc]

At this point, there has to be a story as to why he won't refer to it as a MakerKnife?! What is going on!?

[@drewhoffmeyer]

@@stsnoc I've felt the same way. goes out of his way, unless Giaco gave it to him and he completely forgot where it came from. But you'd think Adam would ask on camera....I don't know...weird

[@TheMyeloman]

Yeah, disappointed that didn’t get the same call out as the other tools and accessories. I guess because they can’t Amazon link it? 🤑🤑🤑

[@Birdgeeks]

@@TheMyeloman Exactly what I was going to say! Funny how almost all his favourite tools come with an affiliate link.

[@DanRksm]

Whelp, order placed

[@rafezetter8003]

I designed my own apron for everyday work as a woodworker, including a flap that goes over the tool pouches (7 of) to keep dust and crap out, but then also lifts up and stays up via small magnets in the fabric. I went for saddle leather for the straps, thick but pliable and a soft feel without the edges digging in - crossover at the back, with a leather cross strap that comes across the waist at the front I can hang things from, that then goes around to rings and clips I made from thick (3amp) copper wire.

[@alex_roivas333]

you should post a video about it

[@rafezetter8003]

@@alex_roivas333 Hehe kind of you to say - but I'm not that type of maker, I'm terrible at general interpersonal interaction, and with no recording gear it would end up like one of the really early YT's filmed on my phone :)

[@ssiewnad]

My apron I wear while I work on my bicycle puts me in the zone. It's similar to yours in layout ..... it brings me joy and keeps my tools on me. Plus it saves my clothes from grease and dirt.

[@MrNb131]

It just occured to me that I wanted a tool apron. Always misplacing my pencils, tape measure etc and HATE bulky belts. So I started looking up reviews thinking "I wonder if Adam Savage has ever talked about them, I love his opinions about this kind of thing". Bam, right here! What a wonderful time to be alive.

[@chiphill4856]

I've really enjoyed these short quarantine videos. Adam is awesome and has a great handle on manual work and workflow. I'm not really a movie nut or prop nut, so I've drifted away from Tested for awhile. Glad to be back! Great videos!

[@OrigamiMarie]

Same here! It's nice to get back to the making, and I will watch a lot more unpolished making videos than polished props videos.

[@rodrigocastro2005]

I find myself using one of those almost all the time in the shop bc I kept ruining my clothes. It has the added benefit to provide a place to rub your hands clean on whenever they get too dirty.

[@psiclops521]

The shop apron is an essential. I got my first for woodshop in grammar school and have had one ever since. Always have a block plane, an engineer's square, a carpenter's pencil, a marking knife. Shop essential.

[@inkystinky5927]

Being a retired butcher I recently hung up my knives and my apron. I have worn an apron my entire career and found using a small bungee cord worked great. Instead of tying a knot behind my back. It really helped my shoulders and wrist making life a little bit easier.

[@vexedcer]

before quarantine i used to put the apron i made myself out of old curtains on EVERY DAY in college. didnt matter if i wasnt working w paint or plaster or anything messy, even tho sometimes people thought it was weird, it made me feel ready for the day. i should really start wearing it again at home.

[@chattymatt]

I LOVE these kinds of videos from Adam. Its an invaluable drop of knowledge from someone who is able to condense years of experience into ideas on workflow and the right tool for the job. Thank you so much Adam and the Tested Crew!

[@cableline012]

I found out about them from Jay's woodworking and I got a leather one and I do love having it. I would always set something down than lose it. Not anymore. Thanks for sharing.

[@kaseytupper1506]

I wear a tool vest I made from a carhart work vest. I gutted the lining. And sewed pockets onto it. I love it. The weight is distributed across my chest and shoulders. I always got what I need and it doesn't restrict my movement

[@katzmosestools]

Adam, I have my signature 20 oz Waxed Canvas Apron launching this Sunday. It has a leather square holder and leather marking knife holder as well as 12 pockets. I will send one your way. Cheers

[@dfcprops3849]

I never considered an apron. I'm not sure if I would wear one at my work place, but it just seems like a fantastic idea! I'm constantly looking for the tools I put down on the table and to have then by your side all the time is awesome.

[@Bo-kq8tn]

oooooh I love this, I love seeing another maker's most essential stuff! We have a little overlap in items, I keep my essential stuff in a jar on my desk, here's what's in it: -3 pairs of scissors, fabric shears, all purpose scissors, and thread snips -a palomino blackwing pencil -2 rulers, a metal one and a clear plastic one -a thin pen and a thick sharpie -a double ended tool with a scribe on one end and a seam ripper on the other -an x-acto blade -a 3x5in pad of scratch paper I use all of these constantly, yes even the three different pairs of scissors :p

[@mattinkel7342]

I made myself a Black denim wood work apron just before lock down hit.. put a special pocket in it for a 12 inch rule and a D ring to slip my calipers through as well as the usual pockets .. came out nice .. will probably make an oil cloth or similar spash proof one for when Im doing lathe work as that can get messy with coolants

[@adonoghuea02]

Before the lockdown I had started helping a friend in their machine shop and they use barbers leather aprons, I've got one set up with a buckle at the back and just a neck strap so I can easially fold it down when I'm doing some cleaning, but just having a handful of tools always at hand is super useful.

[@pastapwrd5508]

Love your stuff Adam thanks for keeping us entertained during the quarantine:)

[@darkdemon42]

Tested folks! tell Adam to look up 'Edding' Pens, they're like his whiteout markers but actually designed for the job he's using them for. And they come in different colours/gauges!

[@sandr326]

What is he using the white out pens for?

[@darkdemon42]

@@sandr326 writing on metal usually.

[@Chinny_Winny]

Wow thx adam! I work on heavy equipment and have loved these tool tips you sent out. Have def taken note on a few id like to get. Tools alone are almost a hobby, and getting the ones that work the best for what i want are like an obsession i have.

[@emmettobrian1874]

As a suggestion for replacing the apron straps, suspenders can be used to clip onto the four points of the apron that the straps do. The advantage of them is that they can be easily removed (and replaced if needed). I'm a utility knife addict, I thought I had the coolest one out there. A nice, tiny, folding Gerber. Dang I just got showed up! Need to get a Giaco!

[@MichaelDBruce]

I just got an apron for teaching. I'm a preschool teacher and outside a bunch. With all the extra stuff I'll need, it seemed the right thing

[@bow3022]

Just a note for a clip behind your back. Look at clips made for the disabled or handicap. They make them where they just snap into place when its close together instead of fiddling with anything. To remove, just slide and pull. They're great, have a load bearing weight depending on the buckle(its on your apron so it doesn't matter). Let me know, I had the research somewhere I'm sure I can find it again for you.

[@themaypole]

Adam on Tested has become rle reliable and comforting content during all this. I never rle watched Mythbusters but now I am a fan of Adam retroactively and I love that he got me the long way round

[@Gullzarr]

I'd love to see another video about your Onewheel. In these times where people are bored, I'm trying to buy myself a nice Onewheel. They looks so much fun!

[@fuse404]

Haha. Of course I'd see a name from the OW discord in Tested's comment section.

[@Gullzarr]

@@fuse404 Hahahaha, that's this channel and the Hacksmith's that made me want to buy a Onewheel. I've seen 2 videos of Onewheel back to back then I wanted one.

[@chloehennessey6813]

Yes. I love my wearable tool. I use Atlas 46 tool vests. They’re expandable. I got the magnetic panels. My screwdrivers fit perfect, my Knipex pliers fit perfectly. Everyone should have a set of Knipex Cobras and a flat blades screwdriver. These two tools will handle a lot. My EDC in my pocket is a Spartan Harsey SHF in S35Vn and Titanium scales

[@bothellkenmore]

I'm just remembering I made a kitchen apron way back in school, gave it to my Mom. I can't even remember the grade but I think it was a home econ class. We had this class where you spent 2 or 3 weeks in several of the vocational classes so you could try them out. I think they called it "world of work".

[@LilSirAxolotl]

We need to add more pockets for specialized tools until we weigh 300 pounds... And then we need to weather it EDIT: And build a display case for it

[@notfeedynotlazy]

And weather the case

[@TheBobbytables]

that flick to get the blade of that knife out, SOOOOO satisfying.

[@andre1987eph]

Always love to see a carpenter with a nice shop. And ten fingers.

[@uatu3021]

Nice to see it, aprons are so useful in a shop that it surprises me that we don't see more KZbin makers wearing them on the regular.

[@AgentJohnSteed]

Much like Adam I discovered the joys of always having the primary tools on hand. Mostly because as I wonders the workshop from project to project I would put down something, and then have to hunt around to find it. In looking for a decent commercial solution I found "Fire Hose Bib Work Apron" from a well known company. It's been really nice, I've had mine for 3 or 4 years now and I really like it.The pockets have mesh lining in the bottom which keeps the saw dust from piling up in them (and easy to vacuum out), and there are a ton a places to put tools. And the fabric it's made from is pretty indestructible. On the negative side, I am not in love with the strapping solution. It's could be much better. Also it's like 35$.

[@MrJeepinZeke]

I need to get an apron for at home. At work (machinist) I always have a steel 6” rule and a note pad. I find it’s too dangerous for any sort of precision measuring device to stay on your body. But having all the writing/marking utensils on yourself is priceless. I also would suggest a paint pen. Tends to write on far more surfaces than a sharpie.

[@SPOOKYSKULL13]

Adam Savage's tombstone: Here lies Adam Savage. He was easily pleased. Smallprint RH corner: This tombstone was constructed and weathered by Adam Savage

[@larrystrayer8336]

I enjoy the tool videos and I’m a apron man I often have several dissimilar builds going on simultaneously and need pockets for specialized tools several with magnets to keep stuff in order. canvas in the summer leather in the winter.

[@WrenchtilDeath]

Thank you for finding the apron. I have been using a Mechanix Wear one at the motorcycle apparel and parts store I work at while changing tires to save my clothes from getting dirty but I hate that it goes around the neck. Going to try one of these out for my home shop.

[@ElSuperNova23]

My lab coat serves a similar purpose, little bits and bobs I need at all times: marking tools, tweezers/spatulas, pipette bulbs, gas adapters and various keck clips

[@tylercannon1210]

I've been a bicycle mechanic for 20+ years and I can't live without my apron. I carry a few really important tools I need to grab quickly and I feel naked without it. I seriously can't work without one on, I get all discombobulated. lol. Love aprons!

[@wihtgar]

An apron never occurred to me(TD of a small Theatre dept. in Florida), but this is brilliant! I just ordered one!!

[@robertpeacock1635]

Agree about extra pencils and markers, you don't want to lose your place in your work to go find something as basic as that. I use to take No. 2 pencils and remove the erasers, sharpening both ends. The end I am using gets dull or broken, just flip it over to use then sharpen later when I had time.

[@stangiles2001]

I love Adam being happy

[@oopoopee]

Being an apprentice machinist these videos are my favorite. I'd love to see what more stuff you can come up with like maybe that radius cutter I saw before.

[@RPRiley]

We are always evolving, so I am not surprised you now realised how handy that apron would be after years of building.

[@nomadicningen]

This seems like it would be a solution to my problem. I'm a mechanic at a golf course and wear a light weight coverall during the winter. Being that I'm in SW TN its toooo hot to wear during warmer times. I find myself missing the options it gives me for edc tools. Totally going to give this a try.

[@shakeyperspective3981]

About time for another EDC video. Excited to know what pocket EDC flashlights you are using these days. Thanks.

[@supersizejm]

I just discovered the Sharpie Twin tip markers that have fine point on one end and ultra fine on the other. I don't know how long they last but so far I like that I don't have to carry both anymore!

[@jeremywasserstrass9649]

A word of caution, when working around a metal lathe you should have a quick release of some sort on the straps, snaps are best. Where I work we had someone who liked aprons get one pulled of off him when it got snagged by the revolving shafts under the carriage apron.

[@dwoodog]

Plus you put the apron on and it just gets the creative juices flowing.

[@simonhoney2050]

Your evolution as a tinkerer is progressing nicely! How far can you be now from a pair of glasses with multiple magnifying lenses attached? (does entirely make sense to have a work-time garment full of always-necessary tools to pull on when you enter a shop, and to protect your other day clothes a little at the same time!)

[@grahambliley8604]

Adam tattooed a ruler on his arm before he sought out additional pockets. I love this man and cherish watching these videos with my son.

[@bradn7]

As a safety thought you should look at trying to have a rip away apron when working around your heavy machinery in the event of another accident. Can't wait to see your next video!

[@justinfernandez1156]

What happened to finding and linking the little thwacker? I'd love one of those, seems perfect for tapping a mini pry bar to remove tackboard when taking carpet up!

[@Sheridantank]

I might consider one for the mobile car mechanic work I do. Most people would say I make great use of space and have neat organizing skills. That's good until you're moving around looking for the same 5 or 6 tools you're gonna use on a job.

[@efgee]

As an electrician, first thing I do when I get to work is but on my overalls. I always cary an assortment of pens, pencils, markers, a crayon, a flashlight and most important I always have my proximity detector for testing of possible live circuits.

[@natetremblay8537]

Funny..... I have a video in my phone for an apron show off as well. I actually picked it up at you local HD made by Husky and love it. The straps and clips are great although it is only made of a cheap synthetic canvas-like material but I love it. The only problem is if you drop something and bend down to pick it up stuff in your pencil pockets like to fall out, which I’m pretty sure no matter what apron you buy will most likely do the same. The only other problem with aprons is they collect so many chips when your running a lathe or mill Lol Hate to be that guy but from one machinist to another I’d seriously consider removing your watch and ring when working with this machines.

[@Chungustav]

I have a similar one with the top pockets but now I'll have to add the lower pockets. I realize now that was what was missing from mine being more useful

[@johndumontelle1304]

I have that exact one and love how it fixes as well and agree that a quicker tie down would be a good upgrade

[@RoelVeldhuyzen]

John DuMontelle any chance there is a brand and or model/type on it anywhere?

[@johndumontelle1304]

@@RoelVeldhuyzenI order mine back in September 2019 and I looked at the one Adam posted and the apron has changed since I think we both purchased it. They changed the pockets, for the worse, I think. I will look and see if there is a good alternatives.

[@johndumontelle1304]

@@RoelVeldhuyzen Hudson Durable Goods: amzn.to/3dL16d6 this one is pretty close or this one comes with some pads for the shoulders(but might want to secure them once you find most comfortable position to prevent them from sliding) Yotache: amzn.to/3bDSPGs

[@RoelVeldhuyzen]

@@johndumontelle1304 Thanks for taking the time! That explains why we're not able to find this one. Both of the ones you linked to see like very decent alternatives. And this might be a good opportunity to get into cloth fabricating by living with one of these as a base for a bit and expanding on it according to what I find I need :) Thanks again.

[@TrapShooter68]

Those diagonal cutters look just like my Harbor Freight ones. I have 2 sacrificial pairs to keep my good Xuron cutters for electronics. Love the apron going to order one now to replace my 40 year old denim one that's falling apart

[@keithreay]

The, “I don’t like the feeling of a belt” dance was glorious.

[@hyperfocal2002]

Have really enjoyed these quarantine videos. I have a similar hammer, but one side is brass, the other side is polymer. Just a little more versatile.

[@udawg34]

Shopping for my first shop apron today to start work on a wood lathe, and one of my greatest creative inspirations releases a video about them? That's my kind of coincidence.

[@lordfrunk3471]

Hey Adam, love Tested thanks for keeping us entertained through these crazy times! I decided to start building a few model cars and Gundam kits while I was stuck in doors. I really learned a lot from the astronaut model kit you put together a while back. I'd really love to see you do a video about model painting. Best way to layer the paints Acrylics/Enamels/Lacquers and your work flow for building a more simplistic model out of the box. Thanks again your hard work keep it up!

[@GiacoWhatever]

Thank you!!! ❤️❤️❤️

[@kryan]

Ciao ciao!

[@tomnylundvideos]

I use a shop-apron (bike shop) at home all the time!👍 super handy to have small tools at hand. Though I am looking for a half-apron with a sturdy belt and pockets

[@ericvicaria8648]

2:00 That off camera noise reel is PERFECTION. It needs to be isolated and used as a sample for all kinds of project videos.

[@afbailey82]

I love bib overalls for the same reason --you can keep a few crucial tools on you at all times.

[@jerryjohnsonii4181]

Thanks for the link on how to get this Apron , Adam. I need a well , built Apron for my gun cleaning !!!!!!!!!!

[@guindesign4458]

Ive been needing a new appron for my knife shop thanks Adam!!! Keep these tool tips coming my list is growing and I totally need all of them lol.

[@davidmartin192]

I have toyed around with the idea of getting an apron for work. I work at an auto parts store, and do a lot there. From making hydraulic hoses to mixing paint. It would be really helpful to.have what I need on me

[@SBDZelda]

I wear a work apron every day at work. I got my straps at Lowe’s. I know I know. But they work amazing. I carry everything in there, and wouldn’t have any other straps than those.

[@lvlupatlife]

Mission Critical Shop Tools! Love it!

[@Zarlax]

Check out the Duluth Trading aprons when you’re ready to replace/try a new apron. Love mine!

[@DroggeIbecher]

and for exactly those reasons i only buy pants that have leg pockets. the stuff i have in it at all times are key, a lighter, an eraser, a swiss army knife, my phone and my wallet. additional to this when i am working (i'm a carpenter) i have a fat sharpie, a pencil, a ballpoint pen, a green pica pen, a box cutter some pieces of paper in my backpocket, a set of bits, a folding stick (metric, because i live in a civlised country ^^) and usually a hand full of screws

[@Nicoya]

Let’s not just skip right past those pencils. Those particular pencils, the paper mate sharpwriter, have some special properties that are very important for the maker crowd: 1) cheap and disposable so you can buy a bulk box of them and leave them everywhere. 2) mechanical, so you never have to worry about sharpening them. 3) unlike every other mechanical pencil on the market, they are exactly the same size and shape as a wooden pencil, which means you can stick them into a compass or scribe or any other marking tool designed to hold a standard wooden pencil.

[@alex_roivas333]

i always love the cheap / no bells and whistles alternatives where they work out well. and while they aren't my go to pencil ... i have a bunch of them and I don't know how i have a bunch of them XD XD XD

[@gnraam]

Have you considered coveralls? They would have the pocket space and give over your regular clothes to protect them. I'm in the navy and I cannot even begin to describe how useful they are.

[@rojasbdm]

I really like these quick tool tip videos. I would like to see one about your workbench and other work surfaces!

[@SuperMIKevin]

i was thinking about the apron and decided to check to see if there were any videos on it and i got lucky.

[@wpribble]

When you redo the straps look at old 782 military harnesses. Padded and adjustable. I would add a spot for a med size tape measure. It would seem this is a common use piece of kit

[@seanwinnik5734]

How do you feel about describing tools on your body as "zero-order" retrievability? since not only do you not need to open a drawer, you don't even need to move.

[@Marc83Aus]

I've been suffering from a chronic pocket shortage, an apron might be exactly what I need.

[@MortalCosta]

I would totally buy an Adam Savage Design/branded shop apron/appeal

[@Alodri]

Savage Industries Apron?

[@michaelanderson1015]

You read my mind, noticed your apron in a previous video and was curious about it. Thank you!

[@kokost]

For your shop apron modification project, you mentioned using clips. Just out of curiosity, what sort of clip and material were you considering? If it is metal, be careful as that may be a potential accident waiting to happen. I will always remember watching a documentary about Jackie Chan's stunt team and how he injured himself upon landing on a metal buckle. Perhaps look into keeping the strap but have it button in place instead?

[@johncrea9395]

Adam Check out the Markal Silver Streak mechanical pencil (available on Amazon) - absolutely great for marking on metal, and the refills are very affordable as well. This is my go to marker for steel and dark smooth-ish surfaces. Used it the other day when cutting some horse stall mats to put in my dog crates and worked very well in that application John Usual disclaimer, I have no involvement with Markal other than as a satisfied user

[@PhilippeDeGuise]

Wow ! Great tip Adam ! You should definitely give some thought into marketing your very own "Savage Industries" apron with the logo they've created for the "The Expanse" shows !! I know I would buy one (if not two ;)P).

[@jllaine]

Make your own apron, might I suggest looking at a camping/hiking/fishing vest for inspiration...

[@gregoryenste3883]

Who are the 25 people that disliked this video? He’s just saying what makes him happy, how can that bother anyone ?

[@5055hunter]

Duluth Trading makes a very nice shop vest. I purchased it, but it needs some customization for how I work. Same heavy canvas, lots of pockets/holders.

[@doughudgens9275]

Notice how he isn’t carrying a multi- tool anymore. Made that holder years ago, and has drifted away from it.

[@pascal6871]

It makes so much sense. As he said, he used to mostly be out and about, doing a million different things without access to tools most of the time, so any tool is better than nothing. When he is at the shop and he needs a screwdriver, he can just take a screwdriver out of his rack and the multitool is pointless.

[@rcmike09]

I bet he still has it on his belt. I seen a video the other day he had it on him. This was just what's on the apron.