Rhino Architecture - AECOM

[@ramratanjangir9055]

At 3:24, even after setting the z coordinate, the middle three curves are not becoming planar.

[@nischalejardar9218]

same problem

[@Abuyole]

@@nischalejardar9218 just use dup border > join > patch

[@esmamansz2642]

How can we solve it?

[@anthonyfossi]

Select the six curves (the three arcs and then the little nub extensions) and use then do the set point command with them rather than the vertices. That worked for me.

[@rashadmarwan3218]

thank u man i liked your works its fantastic ,it help me to learn the rhino

[@schultzeworks]

TIP 1 > Never delete your curves. [1] They take up no space (just put them on a separate layer and turn off!) [2] You might need to make change, so you'll save time and accuracy by not rebuilding them. . TIP 2 > When you repeat a command, your narrator-bot does not mention what is happening. If you are OUTSIDE of a command, then by hitting spacebar, enter, or RMB you will repeat the very last command.

[@AdamArchh]

Thank you so much

[@barscobanoglu5188]

Yoooo. thank you man.... Saved my life

[@ddmddmd]

if you delete your curves by accident, select your surface and type 'extractwireframe'

[@woojinkang4935]

Thank you for your video!!! I can express ideas in Rhino more than better before!!! awesome.

[@valsimotdesign]

This is what I call TUTORIAL!

[@AdamArchh]

Great

[@nasserahmad4653]

Great tutorial as always,very well done,👍🏻

[@AdamArchh]

Thank you

[@ab_obada5012]

Are u meshing Saydnaya prison

[@elvisqreymundo3948]

Amazing! More tutorials for grasshopper, please!

[@offreal]

Nice tutorial. One question, if I blend surface between two edges I get reversed twist, altough one of the surfaces blended right way, other two did not . Flip command does not work in this case nor I am not able to change the direction other way as well.

[@Bohemianism89]

I had the same problem. I worked out that which coordinates the surface blends to depends on which half of the curve you select. as in, there is a midpoint along each line. when you start the blend surface and select the first line you will invariably select a point on the line which falls on one side of its midpoint, when you select the next line you are blending, make sure you select side of its mid point you want to blend towards. its difficult to describe but intuitive when you try in.

[@khewintonlee1876]

@@Bohemianism89 You are a life saver

[@ThatOneArchie]

WOOOW ASTONISHING WORK!!! what are your opinons of sketchup? do you prefer Rino? its nice that you have all the built-in components with Rino!

[@AdamArchh]

Sketchup is a very powerful program, but working with curves is easier in Rhino

[@ThatOneArchie]

@@AdamArchh how much more difficult is Rhino vs Sketchup? cause I've basically mastered sketchup but never even begun work in Rhino.. but id love to start! ..

[@AdamArchh]

@@ThatOneArchie SketchUp 3/10 - Rhino 5/10

[@randomtux1234]

@@ThatOneArchie If you can master Sketchup, you can master Rhino too. It appears a little daunting at first, because of the hundreds of commands/tools but of these i only use 25 commands for literally everything. its also free for 90 days, which is plenty for starters

[@user-yk1cw8im4h]

@@randomtux1234 just crack it from the get go, no point to use the free trail

[@kiyaakbari5761]

thank you so much for useful video

[@pinoq2216]

2:30 at this step when you edit the vertices it edit the hole model but for me it just edit the vertex of the large rectangle ..second the planar surface command not working

[@pinoq2216]

I mean the lofted area didnt join with the blended surfaces

[@pinoq2216]

...

[@AdamArchh]

PlanarSrf only works on planar and fully closed curves. So you have to make all 3 curves planar. If you still can't. Use the EdgeSrf command.

[@pviccs]

did you figure it out? i'm having the same problem, just the square moves

[@anamulhasan6023]

same problem

[@noemihenrytorres9149]

Great!!, thanks a lot for sharing!!

[@AdamArchh]

Thank you for support

[@toscarriergeometra4603]

Greate, awesome. thanks

[@jacobsobelman3923]

Awesome! Would’ve liked to see how you added the mullions to the windows. Was that also done with Rhino or was it Grasshopper?

[@AdamArchh]

Thanks, since this is just a Rhino tutorial, I only included the part modeled with Rhino in the tutorial. I made the window details with GH,

[@ferdipauner8674]

@Yabets Jima yes waiting for this...

[@samirstom6254]

Good teacher 👍👍

[@AdamArchh]

Thank you for support

[@sapnaharendar3576]

Whether it is feet and inches or meters it will be more useful

[@mouhmmedosman2640]

Great job Adam 👍

[@AdamArchh]

Thank you

[@s.i1905]

Really useful! thanks very much!

[@daydayby-wu5sp]

thank you. I would like to see the next video, how to make windows.

[@AdamArchh]

Thank you, use the Grasshopper for detailing

[@mpscqa7387]

Please make video on how to use set point

[@AdamArchh]

Video: kzbin.info/www/bejne/gJDal3yLi6ppfq8si=ppOLny0tDy5eRftW Duration: 04:38 SetPt

[@濱澄相]

good jop

[@IrenePaulina]

Hello Adam, thank you very much for your tutorials. I have a Mac and can't find the "arctic display mode" nor the "vertex selection" option. Do you know why or where are they? Thank you very much.

[@AdamArchh]

Hi thanks. sorry, i never used a mac

[@gyumbae]

thank you so much👍

[@AdamArchh]

Thank you too

[@muhaiminrahman8164]

Hey how did u made the top into planer surface

[@ferdipauner8674]

keren...broo ❤

[@AdamArchh]

Thank you

[@deeanultra]

Are you telling me that i should not learn to use Sketchup ...

[@mcmjewellery8573]

Yes

[@kadir6411]

Şükela!

[@samirstom6254]

Thank you 🌸🌸

[@AdamArchh]

Thank you too

[@ehabalmasri2718]

@5:28 how did he draw a polyline on surface ?? whenever i tried it`s coming as planer

[@AdamArchh]

Hi, the line wasn't created on the surface, it was drawn between the curve segment. Since ‘’Project’’ is active, the line you draw is drawn on the CPlane. Disable the project (from the bottom/middle) and draw it.

[@sirousghaffari9556]

Hi. Why does it perform the opposite of what is in the training when I use blend surface ?

[@AdamArchh]

From one of our followers: FutureLuxury - I had the same problem. I worked out that which coordinates the surface blends to depends on which half of the curve you select. as in, there is a midpoint along each line. when you start the blend surface and select the first line you will invariably select a point on the line which falls on one side of its midpoint, when you select the next line you are blending, make sure you select side of its mid point you want to blend towards. its difficult to describe but intuitive when you try in.

[@sirousghaffari9556]

@@AdamArchh TNX a LOOOOT

[@jeenbekovislan]

Facade???

[@afrykanerPL]

Try to do this in Fusion 360 ...

[@josephelsaaed8887]

HELLO AT MIN 2:39 when i edit vertex it moves only the selected point the curve did not change how can i fix it ? thank you

[@josephelsaaed8887]

the loft part and the blendsurface part are not connected

[@AdamArchh]

Hi, First Right click the Record History Select Always Record History Now model again, problem will be solved

[@josephelsaaed8887]

@@AdamArchh thank you very much it works

[@rajendrameena150]

Why dont you make one part and use polar array with 3 numbers. Even it is good to use flow surface with history on.

[@arden4354]

Exactly!! I was think the same. I have used polar array instead and got better result. Didn't require to adjust using vertices.

[@Fate-a12xt]

Do you have a tutorial on this please? Cause i have a problem with the vertices step

[@archirash3295]

the last paneling grid that is not in TUT would you plase explain it next time .

[@AdamArchh]

We add the details at the end with Grasshopper. It was just a Rhino tutorial.

[@arlindervishaj]

Amazing!

[@AdamArchh]

Thank you

[@muzaffarxoliqov1026]

nice

[@AdamArchh]

Thank you

[@doityourself4912]

could we do it with archicad?

[@AdamArchh]

I don't use Archicad but I think you can do this with any architectural software.

[@davidngingpi7052]

Im new to rhino and i cant get the crtl shift vertices can u help me adam

[@edenassos]

You can, but why would you? It's far easier to do anything computational with Rhino and GH and then export the final to Archicad. I'm speaking as an Archicad user myself.

[@arn11]

last in the video your model is moving around what's tha command for ?

[@AdamArchh]

Turntable

[@archiamine5366]

In scale per minute 1.12 I couldn't do it.

[@cyz1782]

hi, Adam, I can't figure out why the Planarsrf won't work, says "curve must be closed and planar"

[@AdamArchh]

In the previous stage, we synchronized the points in the z direction with the setpt command (or set xyz coordinate). PlanarSrf won't work if you haven't done this correctly. If you do these and still have problems, use the EdgeSrf command, but you should be aware that the surface is not planar.

[@cyz1782]

@@AdamArchh I see, I didsetpt command (or set xyz coordinate). but still not working. Thanks very much , I will try the EdgeSrf command

[@AdamArchh]

Good luck

[@randomtux1234]

good practice is to set grid units in options and snap to objects on, then your curves are not visually closed and apparently valid, but actually closed and really valid

[@rooneyshr7408]

Nice

[@AdamArchh]

Thank you

[@delfinamedrano9254]

Hi Adam, it won't let me select the vertices and I have selected ctrl and shift, what am I doing wrong?

[@delfinamedrano9254]

at minute 2:38 it's my problem

[@lawrencewen2531]

Hi Adam, I saw the Rhino 8 architecture Saul Kim studio is blocked, could we access it again? Thanks!😀

[@AdamArchh]

Hi. We deleted many videos from the channel. Unfortunately it is not possible to bring them back

[@lawrencewen2531]

@AdamArchh so sad:(

[@lawrencewen2531]

@@AdamArchh is that possible that we can watch it somewhere else? because I really like your tutorial

[@StudioDevapriya]

In The setup im from Holland

[@AdamArchh]

I love the Netherlands. I can't wait to visit.

[@樱花与百合]

Adam，my GOD！

[@princemonzzzi2174]

hey my blend surface command is wrecked i think. The new curved surface is twisted way more than shown in this video. Anyone knows why?

[@princemonzzzi2174]

nevermind i got the answer from the comments. thanks

[@AdamArchh]

Good luck

[@noormemar9659]

@@princemonzzzi2174how did u fix it

[@TheRealZamZamTV]

What software is this?

[@Share_The_peace]

It’s called Rhino

[@xiaominyu8104]

是10年前筑土的adam么？😁

[@AdamArchh]

Designed by: AECOM

[@sapnaharendar3576]

May i know which units you are working sir

[@AdamArchh]

Units are meters

[@jeremvfx]

what is this software ??

[@AdamArchh]

Rhinoceros 3D

[@jeremvfx]

@@AdamArchh ok thank you I didnt know about this one

[@scooter2163]

diggin it.

[@jawaharsrinath485]

🔥🔥🔥💖

[@حسانسلمان-ل9د]

Is there an Arabic translation available?

[@AdamArchh]

Not yet

[@osammhammd758]

Could you please send me the pictures you are working on?

[@AdamArchh]

Of course, archdaily.com/794205/prince-bay-marketing-exhibition-centre-aecom/57c39d2ce58ececcfd000409-prince-bay-marketing-exhibition-centre-aecom-plan

[@venkatachalamyalla2001]

!

[@jdoe27]

Why do I all our buildings have to look like fidget spinners or like alien sex toys made out of out of stainless toys? It´s so jarring and hardly ever fits with ever the surrounding cityscape at all

[@AdamArchh]

The design of the buildings is not ours. You just use these projects to prepare modeling tutorials. We don't know much about sex toys.