Zaha Hadid Architects - Rhino Tutorial

[@lukasz.7557]

I have a tingling sensation that you may or may not, single-handedly save my architecture degree. Learnt so much new stuff from this single video. Keep it up

[@AdamArchh]

Glad to hear these. I will continue to share. Thank you.

[@mareknovotny74]

thx

[@cairoreid346]

at 3:05 the moment you clock on the first subd it highlights green and you are able to move control points throughout the surface independently. then I noticed that once the first subd was complete it resulted in a formal mass rather than extruded, i would definitely need help on that part for I am experimenting on my mac while im away fro the pc powerhouse. thanks!

[@AdamArchh]

Holding Ctrl+Shift click edge and then you can extrude by holding the dot on the gumball

[@javierpiles5833]

I was looking also help in this part. I'm gonna try. Thanks

[@chengli9110]

@@AdamArchh Luckily find this coment,Thank you so much!

[@Gabriel.Ponce.De.Leon.777]

Congratulations for the music, very good taste.

[@abderrahmanenachda1175]

Nice work. I use always sketchup but with your videos its seems so easy to use rhino

[@AdamArchh]

Thank you. Abderrahmane

[@JamStewAkuryou]

This music is so calming and relaxing. This video is so full of useful tips and knowledge. Nice work. Great skills. I really enjoyed watching it.

[@AdamArchh]

Thanks for the nice comments.

[@iyogeshjha]

Your video is very informative and unique. It helps to improve our designing skill . It's a request please also make video on how our design should be installed in real life example through animation. How the glass will be placed outside the building and how the supportive piller would hold on different angles

[@AdamArchh]

Thanks. There is an example video about it. I even made the model video. Project: Grotto Sauna Architects: Partisans Tutorial: kzbin.info/www/bejne/Z2jWl3xqepiijZY Video: kzbin.info/www/bejne/rmeypmOQis1qn80 Achdaily: archdaily.com/574851/grotto-sauna-partisans

[@johnnyyue3814]

Well done ! Actually we can use subd to create works like Zaha with consciousness.

[@dohawork1404]

Your videos is very very helpful Thanks a lot *-*

[@AdamArchh]

Glad you like them!

[@salamayad8757]

thanks, keep up the good work

[@AdamArchh]

Thank you Salam Ayad. We will always continue.

[@umutt8053]

Nice work

[@sondosnagib6808]

I don’t understand what you did in the beginning when you made a line over the scale at 0:37

[@AdamArchh]

I used the scale command; and rescaled it to 5000 cm.

[@sondosnagib6808]

@@AdamArchh thank you i got it now♥️

[@VidEOoSlOKOss]

Que buen tutorial! Muchas gracias 👏🏻👏🏻👏🏻👏🏻👏🏻

[@fatimahamid4320]

Hi How do you make it all one mass in 5:20 and when I use sub plane the corner it's not rounder Can you help me please

[@AdamArchh]

Hello. If I understood you correctly. The command you should use should be remove crease.

[@umut576.]

Great job

[@arkpuntozero]

So, thank you! Where is the reference images? From link get different image. Thank you again!

[@AdamArchh]

So sorry, Project link: www.archdaily.com/161116/london-aquatics-centre-for-2012-summer-olympics-zaha-hadid-architects

[@JS__99]

Thank you a lot , I very liked your videos 🤩🤩🤩🤩🤩🤩

[@AdamArchh]

Thank you too.

[@thelyoness5467]

When I try your step at 3:03 my shape does not create new cross lines with points for me to select. Do you know what I’m doing wrong?

[@AdamArchh]

Press and hold Ctrl+Shift to select an edge, then press and hold the middle point on the gumball to extrude.

[@falancaonat3888]

@@AdamArchh Hello Adam, im new with Rhino. Ctrl+Shift works but when i extrude it shrinks back like elastic... What im doing wrong?

[@giovannamilanicaparroz1857]

really nice!!! congrats!

[@AdamArchh]

Thank you

[@berkanyuksel1997]

Zaha's Masterpieces of Archs🔥🔥🔥🔥

[@vincentmeissner8193]

Nice tutorial!

[@AdamArchh]

Thank you.

[@roaahafza1362]

Thank you so much!!

[@AdamArchh]

Thank you too

[@andreipopoff2707]

Я восхищен!!!😍

[@samimasum7297]

Her hebi adem

[@umutt8053]

Selam Sami bey

[@umut576.]

Mükemmel bir iş

[@themiddle4084]

5:50 what did you press show that new line

[@AdamArchh]

Right Click insert subd

[@themiddle4084]

@@AdamArchh can you tell why when i try to split the 2 objects, then it said "Split failed, objects may not intersect or intersections may not split object." then why i try to swap the objects, it can complete splitting but the main object become messy.

[@ararena4075]

Great Content

[@AdamArchh]

Thank you

[@omidnejat8270]

Hi Adam, it will be super helpful if you talk in the videos, sometimes it's a little hard to follow what tools you are using (the overall process would be more efficient if we hear your instructions), but thanks for the videos.

[@AdamArchh]

Thank you.

[@jouzou4645]

3:01 for my subd plane i cant choose only that 3 points insted it chooses the whole plane.any solutions?

[@AdamArchh]

Hold Ctrl Shift

[@jouzou4645]

@@AdamArchh thanks a lot

[@tungnguyenhuu4304]

can you theo me how to creat elip in 2:57 , i just did it like you but only rectangle ??

[@AdamArchh]

Try press Tab key

[@zlw3445]

hi, when i followed you why cant i split it like you at 15:00, info:cant meet together

[@AdamArchh]

Hi. First select all windows and carriers (except the roof) then press the split command. Then select the roof and enter.

[@tralanehaynes9725]

How did you add the edge to the SubD plane at 3:03?

[@AdamArchh]

Hold Ctrl+Shift and select edge

[@designerjuly2437]

@@AdamArchh everytime you drag the edge, another edge appears, and you can change the direction of dragging, how did you do it? thank you

[@AdamArchh]

@@designerjuly2437 Hi, the tool you need to extrude the edges is to drag the middle point. If you drag the edges using the midpoints on the gumball it creates a new face.

[@Beardedvillain841]

Hi Adem, I like the videos your posting, so cool to work allong with it. It would be very usefull to also showcase the steps you make. This would make it more easier to follow your steps, especially for noobs like me ;p

[@AdamArchh]

Hi Mehmet, thank you. There is no sound in their first video. However, I recommend you to watch our latest videos. We voice all the stages in detail.

[@kurdmanrekani5763]

Well done bro, is the software easy for using ? like sketchup

[@AdamArchh]

Hi Kurdman. It is an even easier program than Rhino SketchUp.

[@kurdmanrekani5763]

@@AdamArchh So Rhino easier than skp right ?

[@AdamArchh]

For me. Yes

[@ronytarik5476]

شكرا جدا لحضرتك استفدت كتير من محاضرات حضرتك♥️ بس عندي مشكله ف بداية المحاضره دي ممكن اعرف لما ب create subD plane فالدقيقة 2:55 بيظهرلي اللاير باللون الاصفر وبضغط ctrl+shift وبعمل اكسترود وانا ماسكه الdots بيحرك البلان كله ولو ضغطت alt بيعمل كوبي للبلان كله مش زي ما حضرتك بتعمل ..ممكن اعرف اي المشكله لو سمحت ..مع العلم ان الedges والdots بتظهر لونها اصفر مش اخضر زي حضرتك ..!

[@mariamzeaiter5114]

انا كمان

[@alonsoj2968]

El diseño original de la mariposa es de un arquitecto cubano y forma parte de la ciudad deportiva de Cuba que se contruyo antes de 1959, busquen la informacion y datos oportunos.

[@AdamArchh]

Gracias por la información.

[@women8005]

I very much aspire to become a famous and successful architect I love it💞💞💞💞

[@AdamArchh]

Of course you can if you work hard.

[@women8005]

@@AdamArchh waoo thank you so mach, I have a question please are you an architect?

[@AdamArchh]

I am an interior architect

[@women8005]

@@AdamArchh It's very interesting, I wish you success always

[@latibes]

I modelled this building in Cinema 4D with full interior. Good job though.

[@AdamArchh]

Thanks and congratulations. Modeling this building in Cinema 3D is very difficult.

[@Akhiii_]

I dont think I caught the detail but how do you make it so the picture frame doesnt interfere with drag selections, I keep selecting the picture itself in attempt to drag selection i drag the picture itself, like for instance 3:36?

[@AdamArchh]

Hi, First select the image then use the Lock command

[@Akhiii_]

@@AdamArchh Ah ok thank you! Appreciate the tutorials as well really helping me prepare for this coming upcoming semester of university

[@AdamArchh]

@@Akhiii_ Thank you

[@keliicenturion1505]

Is there a way to know what he is doing? I cant see most of the commands or hear anything. Are these tutorials for only for professionals?

[@gaumaker]

I am sorry, what is the name of the soft? Thank you.

[@AdamArchh]

Hi Artem, Software is Rhino 7, and tools are SubD

[@gaumaker]

@@AdamArchh thank you! Perhaps you can recommend me the soft to create Jewelry ? I’m full of ideas and going to learn to create CAD models of the jewelry.

[@gaumaker]

Fully inspired of Zaha’s creativity, Musk’s activity and I know I’ll find my boiling place between them

[@hendriktara2922]

Nice tutor

[@AdamArchh]

Thanh you

[@leiliasadykova5405]

Hey, Thank you for the tutorial! My sbd shows in two different shades after mirroring, do you know why is that would that be happening? can't attach the image to show (

[@AdamArchh]

Hi thanks. If you want to show both faces the same color, right click on Reflect. But remember this. After pointing both sides in the same direction, the Reflect tool is now ineffective and you have to work with both sides separately.

[@فداءأبومرشود]

عمل رائع جدا ،سلمت يداك

[@AdamArchh]

شكرا

[@aslidinarchitect]

and there are courses

[@住住-g9e]

How to use this dot in 3:02(in video)?

[@AdamArchh]

Use the gumball to extrude - Number 13 in this image - docs.mcneel.com/rhino/6/help/en-us/image/topic_illustrations/gumball-001.png

[@suchandrabanerjee1231]

@@AdamArchh But that dot doesn't appear and I'm not able to extrude the sub d object keeps moving around.

[@ajinkyarandive]

There should be key pop up in corner to show what shortcuts you are using

[@shanay9994]

Nice tutorial sir, could you link up the music

[@AdamArchh]

I guess that's the music: - kzbin.info/www/bejne/r5euZqSIpKp-n7s&ab_channel=Musicoth%C3%A9rapie%26Relaxation

[@shanay9994]

@@AdamArchh thank you :)

[@ioanavalentina5214]

Great video, what enviroment map are you using here? Thank you

[@AdamArchh]

Thank you. (arches.png)

[@junhaopam1629]

How did you reflect the shape at 7:24?

[@AdamArchh]

Reflect SubD object. And select X or Y axis from command panel. I selected X axis on this tutorial. and 0 enter.

[@백종현-l3u]

thanks for the video, I wanted to make these kinds of nurbs or double-curvature modeling to real model, but how do you unroll of unfold double curvature models or nurb models?

[@AdamArchh]

Try this, - kzbin.info/www/bejne/q57IiIebnLaefqM

[@MG-yv1pw]

Hi Adam, thanks for your helpful tutorial, i have question about those navigation that appears when you click on surface or points, how could i find it, it won't appear automatically for me.

[@AdamArchh]

Hi, enable the Gumball - rhinocentre.nl/wp-content/uploads/2017/11/Fig-46.png

[@MG-yv1pw]

@@AdamArchh thank you so much for your quick reply .your tutorial really helped me in my project I hope I could show you when it finish

[@shaiba7748]

could u send a link to download the already made rhino model for this

[@lynchen7912]

I can't find subd in v6,did it had another way?

[@AdamArchh]

Hi Iyn, SubD can only be used with Rhino 7.

[@JS__99]

🔥🔥🔥🔥👍🏻

[@faisalazamkhan3240]

why dont you use paneling tool rather following this long steps for windows

[@AdamArchh]

Paneling Tools is not available in Rhino and some students are having trouble downloading and using it. So I tried to do all the work with Rhino.

[@faisalazamkhan3240]

@@AdamArchh thanks ,,please try some industrial or automobile details in sub d

[@AdamArchh]

​@@faisalazamkhan3240 Thank you for your support.

[@sofainemahaidine7275]

Achievements of Arab Zaha Hadid, the first female engineer in the world, may God have mercy on me

[@ستورياترياضيه-ح3ف]

اذا تلاحضين مخلاللج قلب عبرك

[@eduardtusha3045]

What sofware you use?

[@AdamArchh]

Rhinoceros 3D, version is Rhino 7, tools are SubD tools.

[@pedrocastrorabadan7759]

Is this possible with Rhinoceros 5?

[@AdamArchh]

For this method. To can not. But you can download T-spline plugin

[@razzaqjibran]

Is this the most efficient way or the most slowest and basic ?

[@archiamine5366]

In a minute 2.55 I did the same thing, but the result is a rectangle, not a semi-circular shape

[@AdamArchh]

Tab key

[@imeshakalpani8399]

Witch software did u use

[@AdamArchh]

Software name is Rhinoceros 3D. This version name is Rhino 7 SubD.

[@valentincastelo6798]

i wish she knew how to speak english. would be nice to hear instructions

[@ahmadrezalorzanganeh4415]

Dear teacher, can you teach us sheet metal training in Rhino and Grasshopper, thank you very much.

[@bettyadanna512]

What software were you using

[@AdamArchh]

Rhinoceros 3D

[@bettyadanna512]

Ok, thanks Adam

[@nicolim3946]

Hey Adam, I'm having problems splitting the glass and carriers with the subd roof. Do you know why this might happen? Did you explode the subd before splitting? Thanks for the video btw!

[@AdamArchh]

Hello, it means that they do not touch each other exactly. First create curves with intersection command between roof and carriers, then use these curves for split.

[@nicolim3946]

@@AdamArchh Thanks for the quick reply

[@silviad2451]

it is possible only with rhino 7?

[@AdamArchh]

Yes, Possible.

[@silviad2451]

@@AdamArchh so, isn’t possible with old version of software (5-6….etc) thank you!

[@natalyruiz1568]

How can I hide or eliminate the grid that appears on the curve shapes? I saw another videos of your channel and sometimes those grids doesn't appears

[@AdamArchh]

Options - View - Display Modes - Shaded - Visibility - (Dissable) Show Isocurves

[@titusmaggy]

How do you extract each panel shopdrawings?

[@AdamArchh]

Using Grasshopper

[@titusmaggy]

@@AdamArchh Can you make the video for it?

[@AbaasMohammed]

Programe name plz

[@AdamArchh]

Rhinoceros 3D

[@mohamedhassanebrahimmegahe5140]

when im doing the split order it show me an error says ''Split failed, objects may not intersect or intersections may not split object.'' what should i do ?

[@AdamArchh]

Hi, first use intersect command then split using these intersection lines

[@arq.carlosleite2199]

👏👏👏👊👊👍👍

[@brunolibano6513]

👏👏👏👏👏🙆

[@liftwithyt]

Can I get the model?

[@uthiransartroom3132]

How to drag subd plane it's not working for me... It's working only in xaxis

[@AdamArchh]

In this link you can see Rhino's Gumball tool. With number 1 you can move objects freely in any viewport. - docs.mcneel.com/rhino/5/help/en-us/image/topic_illustrations/gumball-001.png

[@moffers7256]

Apa nama aplikasinya???

[@AdamArchh]

Rhinoceros 3D. Rhino 7

[@moffers7256]

@@AdamArchh 👍👍

[@kmntn7]

❤

[@eddyvelasquez431]

I can't elongate the subD plane

[@AdamArchh]

Hi Eddy. First select a surface or edge by holding down Ctrl+Shift. Then grab and shoot the signs in Gumball. If you pull the arrow it will move. If you hold the small dot in the middle, it will extrude.

[@kaimzboy3866]

Software name pls

[@guillermovilloragarcia6328]

Rhino 7

[@007imt5]

NIUBI

[@umut2375]

Gruß

[@denizcerenozbek8973]

everyone is looking for this comment! DRAG THE CONTROL POINT AND BEFORE YOU LET GO HOLD CTRL

[@AdamArchh]

Teşekkürler

[@berniesbastardsdiansdemons9153]

Hi how did u enable those moving arrows in blue and red.?

[@AdamArchh]

Hi Uati, Activate Gumball in the lower-middle part of the screen. This feature is only available in Rhino 6-7 versions.