Adding £10,000+ in UPGRADES to a Mini JCW F56 LCI2

[@huguesr1603]

Good job ! A road test of the car would be very good to see the new behavior.

[@Carbonwurks]

This customer is back with us in a few weeks. I will ask if he will allow us a test drive 😀

[@garysmith70]

Cracking job looks fantastic.

[@Carbonwurks]

Thanks 👍

[@gustawkwiek2844]

is this front pad+rotors combo usable on the street? and how did it perform on the track

[@Carbonwurks]

It’s completely road useable, it may be more prone to build up on the discs but otherwise it’s a good setup. We have produced a series showcasing these brakes on circuit, they held up very well 😀

[@gustawkwiek2844]

Do you thing bluestuff will work with stock rotors or i need to swap them to?​@@Carbonwurks

[@Carbonwurks]

More dedicated discs/rotors will perform better but they are designed to be used with stock discs as well.

[@xxlk969xx7]

Needs a pro ram intake and exhaust now

[@Carbonwurks]

Stay tuned for when this car is back in a few weeks time 👀

[@peterelias5567]

Hello! I can see that a lot of handling parts have been installed on the car. What about sway bars? Do you have any experience with H&R solid sway bars? Front 27 mm and rear 25mm. Do you think that this combo is good compromise between street/track use? Thanks.

[@Carbonwurks]

No experience with H&R bars on this particular car. Loads of experience with the white line racing bars however which are great for additional chassis control without much of a compromise on the road.

[@dwojcik22]

Good job, the background music made me mute the video between the talking though ;p

[@Carbonwurks]

Surely this tune is a banger?? 😀

[@MrPhillipBroyles]

Hello! I see that you install a 225/40/18 tire. What's the offset of the rims? Did you have any rubber issues? My F56 JCW has eibach lowering springs (not as low as yours). Do you think I can install 225 tire?

[@Carbonwurks]

These rims are ET45 but require a small spacer on the front. It also depends how the camber and ride height is setup to eliminate any rubbing. A 225 isn’t an issue if the suspension is setup properly. Lowering springs only shouldn’t be an issue running wider Tyres (offset depending).

[@MrPhillipBroyles]

@ thank you

[@justchilling9442]

@@MrPhillipBroyles Hi, I run Michelin Pilot 4S's with a 225/40R18 with an ET40 and I have eibach lowering springs. I get slight rubbing on the back from the plastic wheel arch under full compression, example if there is a big dip in the road. I trimmed the plastic inner by about 1.5-2cms

[@Humbleyouth]

🔥🔥