Adding 180hp with EDGE Tuner Install…

[@MLGtroll365]

Your doing an amazing job at this KZbin Thing. Keep up the good work.

[@ReysGarage]

Thanks buddy!🙏🤘

[@Josephhutton93]

The airbag light on my last truck was actually from the electrical connection under either the passenger seat or the center console. I just unplugged it and plugged it back and it went off

[@ReysGarage]

Nice man thankyou! 🤘

[@ReysGarage]

add me on insta: @reysgarageyoutube

[@LoganThiede]

this truck is so sweet! those new tires will definitely improve the looks same with the cab lights and new paint instead of that wrap

[@ReysGarage]

Yessir I agree man! Thanks for watching 🤘

[@ReysGarage]

add me on insta: @reysgarageyoutube

[@jowieby]

Should be making more boost than 10 psi for sure

[@ReysGarage]

Thanks bro that’s literally what I was thinking. I must have a boost leak somewhere right? Normal boost should see 20psi under load?

[@ReysGarage]

add me on insta: @reysgarageyoutube

[@jowieby]

@@ReysGarage definitely, stock they should make atleast 20-25 psi

[@ReysGarage]

@@jowieby where can I possibly have a boost leak? Would it be that Tapper cover? I know for sure there’s a boost leak somewhere. I’ve never seen it get as high as 20 but then again I don’t really beat on it too hard either.

[@Moose400ex]

If your going to do cab lights order or get the factory OEM kit! It comes with a big paper template that located everything on the roof exactly. None of the after market kits out there come with a paper template, only the factory OEM dodge/mopar cab lights kit. Believe it or not, No new trucks came brand new from the factory with cab lights, all have been either dealer installed or put on by the end user/ owner. Ive done many cab lights kits over the years, and the factory OE kits are the best. Comes with the harness and everything including the paper template. You tape it on your roof. I used to have one folded up i saved around here some where. But trust me. The template makes it quicker, easier, and fool proof, no eye balling where they go hoping they are even or not. If i remember the factory kit from the dealer was like $80, and the last factory OE one i ordered was like $75 shipped. I just went with the clear lens, of i want to smoke them then ill use VHT night shade. But the clear looks good, with orange led bulbs. Like i said I’ve done quite a few cab lights installs and have ‘em down to a little over an hour. Just pull the a pillar plastic, remove the visors and overhead center console, and interior over head cab Interior light, to drop the headliner down to be able to get up in there. Lay out the template on the roof, center punch your marks and drill Some big 7/8” holes! Its a little scary drilling big huge holes in your roof! Cause theres no going back after that! The power wire runs down the driver side a pillar. I think if i remeber on 3rd gens theres a wire on the a pillar for cab lights already to hook to. Can’t remember on the 2nd gens if the power wire was already there or not, but the fuse panel in the side of the dash is already there. Put a dab of clear silicone on the screws just for insurance against leaks if your in a climate that it rains/ snows a lot! Water leaks in the cab are no good! And it will Leak a bunch before you realize its leaking snd damaging the headliner, and mold. Trust me when i say, use the factory OE cab light kit. You could Totally do 3rd or 4th gen ones even, they dont have to nessicstly be 2nd gen ones. The 3rd/4th gen ones are cool. Id show you my ‘02 and how i have it but i cant post a pic on KZbin comments heh. You canLook me up on FB using my email if ya want and i can share some ideas with ya! Thats the only idea i got, i don’t know how to send pM’s on youtube. Heh, I’m not on instagram. [e-mail]

[@ReysGarage]

Hahaha hey Moose! Always love your comments brotha! So much knowledge man! Thanks again 🙏🤙

[@ReysGarage]

I’m going to make a FB group for the channel and I’ll add you bro 🤙

[@ReysGarage]

add me on insta: @reysgarageyoutube

[@lucasmancini7415]

I went with the edge comp box and have my cts3 hooked up. I can’t monitor fuel pressure or oil pressure or oil temp with it and can’t monitor egts. I had the cts3 before the comp box so didn’t cost me anymore but now I need pillar gauges for fuel egt and oil

[@ReysGarage]

Damn bro you should look on market place. I bet a guy close to you has some lol I hate that tho. I hope you get it figured out 🤙

[@ReysGarage]

add me on insta: @reysgarageyoutube

[@Moose400ex]

Your not going right be able to paint with that compressor. You need a 2 stage compressor. That little thing you ain’t gunna be able to do much with. There is no way that little plastic piston compressor would run my snap on impact. Look at an ingersol rand. I got my 100 gallon IR 2 stage 220v compressor on sale at tractor supply and then used a buddies employee discount any got it for $500. Your gunna need a 220v 50 amp Circut to run it. Its totally worth it. It will Power anything i have, not at a 100% duty cycle but wt enough of a duty cycle to get s ti ff done and not have to wait 10 mins for it to recover snd then only get 1 min of air usage, you cant paint like that lol. Ive been all down that road with little compressors many times and finally bit the bullet and got a really nice one and wouldnt go back, it’s so nice to have shop air that can handle industrial tasks. Not just some little at home stuff. Ive got it all set up to be able to air up semi tires, i can run 100 ft of air hose all the way out to the driveway to air up semi trailer tires if i simply up. I installed an air fitting on the outside of the house to! The stand up compressor sits on thick rubber isolator pads (old horse stall mats). Its tucked in its own corner out of the way. I even thought about building a cabinet around it but it looks too cool in the corner covered with stickers! Ya man, tjat little compressor will get you by foe now, but don’t expect to be able to do a bunch of body work or painting with it.

[@ReysGarage]

Damn it man I was hoping to be able to get away with it! I may just leave the wrap for now 😭

[@ReysGarage]

Will it work with the Raptorliner Kit? Also what’s size compressor minimum for auto paint? It needs to be entry level and budget too since I’m only gonna use it a couple times a year at most right now.

[@thatgreyplatty6315]

Man you ready to.trade for a 07 5.9???? Lol! Ya I used to run the fuel on 1 to try to keep the soot down. You got bigger tires tho so you probably need all the fuels to help. Truck is killer man, I need another 2nd gen in my life now lol. I really liked the turbo timer and the ECT safety that was built into the edge.

[@ReysGarage]

Yessir! I about ready to put this one up for grabs soon. Maybe by July I’ll be ready to post it for sale or trade. I really appreciate the input brother. Sick truck!!! 🤘🤘🤘

[@stmfttr05]

What rims are those? Love the setup

[@ReysGarage]

Thanks man! These are XD Diesel 22x14 deep offset. Appreciate you watching 🤙

[@ReysGarage]

add me on insta: @reysgarageyoutube

[@dieulitanlouisjeune4031]

How did you adjust your headlights? I have the same ones and don’t know how to adjust them.

[@ReysGarage]

There is a Silver Screw on the back of the headlight assembly that has a textured washer built into the head of it. You can reach in there and turn it clockwise to go down and counter clockwise to go up. I was able to use a stubby Phillips screw driver. I maxed mine out cuz of the lift

[@ReysGarage]

add me on insta: @reysgarageyoutube

[@jeffwilliams4676]

Can’t wait to see this video. Do you enjoy driving the Dodge too much?

[@ReysGarage]

🤘

[@Kodi5204]

Be careful with edge tunes they like to kill transmissions

[@ReysGarage]

Ahhh okayyy. I got you bro. Thankyou for the heads up.

[@norrisabram9577]

I don't mean to be rude, you talking to much 😊

[@ReysGarage]

😂😂😂