Adding Pot Filler Water Line | Pot Filler Plumbing for $50 | My Fixer Upper Pt 12

[@JohnBrown-ks8bn]

I appreciate you being real about that small mistake it happens a lot and you took it like a champ . Great video

[@BryanBuilt]

Thanks I appreciate you watching! I mess things up all the time 😂

[@KristinaBotelho]

This was the most helpful video of all I found on KZbin!

[@BryanBuilt]

Thank you for watching!

[@joshuaengel7119]

Why shark bite?

[@Rocket-x9v]

So you said you were putting a shut off inside the wall? But then you buried the shut off valve behind the wall .

[@BryanBuilt]

Yeah…the access to it is in the laundryroom behind

[@LizA-ym5cd]

Thank you so much!!! You're the best! Thanks for being honest...

[@whateveryousaypeople]

Check with code to know how far away the electrical box needs to be.

[@michaelfrankie]

So no collar to drill in? I ask cause I'm not excited about drilling into quartz backsplash. Thanks for video and product link.

[@BryanBuilt]

No i didnt have to drill in since i installed the backsplash after i just went around . A nice diamond hile bit should do the trick.i usually put painters tape to cover the are so i dnt scratch the surface . Thanks for watching! This is my favorite thing that we added in our kitchen

[@billnipp2309]

Why aren't there any videos on installing a pot filler in a finished kitchen??? ty

[@BryanBuilt]

Not sure . Maybe becuase its more complicated . Thanks for watching!

[@bhinton8789]

Good video and very Helpful

[@BryanBuilt]

Thanks!

[@Trashpanda_404]

I just got mine the exact same model. Have the wall ripped apart and ready to go, but the rear connector is missing, plus I ordered nickel and it came with a chrome plate… 😡

[@BryanBuilt]

Sorry to hear that! I would reach out through amazon if you purchased through there sellers have to fix the issue

[@Trashpanda_404]

What’s the height of yours? I just raised ALL of my cabinets to the ceiling and adding custom stainless steel shelving under the cabinets all the way around. I didn’t raise the microwave cabinet, and not sure if I’ll have room or not. Believe the amazon model I’ll need an extra 1.5” but it’ll then screw up my open face cabinet I built up top. 🤷‍♂️

[@BryanBuilt]

Mine is 17 inches from the counter top. Sounds like you have a nice little project going on

[@luisviera9810]

Hi can you link the pot filler please!

[@BryanBuilt]

here you go amzn.to/3m2R9xO

[@carolyncarlson3825]

Let us know how you like it....hugs

[@BryanBuilt]

Love it

[@antonioborges401]

NÃO UTILIZAR SHARKBITE EM ESPAÇO FECHADO!!!!

[@saitama5000]

DO NOT USED SHARKBITE IN ENCLOSED SPACED !!!! 👏🏻👏🏻

[@BryanBuilt]

From what i understand they are approved for enclosed use? But i maybe wrong. Either way i have access from behind. This wall backs into my laundry room wall which is currently open . I am planning on leaving an access panel where all the laundry plumbing is .

[@reinaldoromero25]

Great job doing the same access panel from garage and shut off keep up the good work

[@papthegamerofficial]

No way that’s high enough. Great video though.

[@BryanBuilt]

Thanks! Ive got 19 inches from the stove to the filler

[@papthegamerofficial]

@@BryanBuilt as soon as I sent that message I realized I’m an idiot. I saw that it was level with the bottom of your cabinets in that felt too low. I’m getting ready to install one and I measured my tallest pot and the alignment brings it almost even with the bottom of my cabinets which is exactly where yours is. So unlike most people on the Internet I have no problem admitting I was wrong and my comment was stupid. Thanks for the awesome video.

[@BryanBuilt]

😂 no worries! I had a hard time figuring out the height and i found alot of different things online but finally i think anywhere from 16 to 24 inches is the sweet spot depending on your personal needs . Again thanks for watching I appreciate it

[@papthegamerofficial]

@@BryanBuilt I just installed mine in about 30 mins thanks to your video! Much appreciated!

[@BryanBuilt]

@@papthegamerofficial thats awesome!

[@antonioborges401]

DO NOT USED SHARKBITE IN ENCLOSED SPACED

[@zaklewis177]

Do not use shark bites in walls

[@antonioborges401]

dedicate yourself to fishing boy, for plumbers you don't get away with it🤣🤣🤣

[@tomsolley4360]

that was kinda painful to watch

[@antonioborges401]

the output is too high