Addressable System Test 28

This video is a test of my Apollo protocol alarm system in my house.

[@TheosTrainsWalesOfficial]

When the world needed him most... he returned. Been watching you since 2016!

[@testlogs9005]

awesome :D.

[@hunter-killer]

HI I AM SUBSCRIBE TO u

[@olivers_level_crossing_uk]

Same

[@carolannekerr5729]

@@testlogs9005will system test 29 come out

[@natalie_boyd]

@@carolannekerr5729no

[@The_VampireDevil]

Nice intergrated base sounder, thats the first in your system tests! 2:32 😊❤❤

[@ElliotMacpherson-go5lz]

Your videos made me have a interest in fire alarms. It all started when I accidentally pressed on one of your videos on KZbin and I got the interest. So that’s how I got the interest. 😊

[@The_VampireDevil]

Excactly, im working for a new same system, its a discovery / .:::XP95

[@ElliotMacpherson-go5lz]

Cool 😅

[@ElliotMacpherson-go5lz]

Sorry what I said was slyly 😂 I was going to say I subscribed to your channel 😂❤

[@ElliotMacpherson-go5lz]

@@The_VampireDevilg

[@The_VampireDevil]

Thanks for saying 'Cool'

[@elgvr32]

I really like these type of videos. They are really interesting and cool. I’m studying electronics, like this too. I finally bought a starter pack of alarms, call points and sounders, etc… I have been studying electronics since I was 15. I love your videos a lot. I also have been interested in electronics since I was 7.

[@callumlaird5158]

Love your vids - also great to hear a Scottish accent too. I need to get my old Vig set up in my house, it's doing no good sitting in a box in my garage

[@testlogs9005]

i have that fifey dundonian mix of an accent :P, aye you deffo do need to get that panel up and running and share what you do with it :).

[@callumlaird5158]

@@testlogs9005 haha, you can't be far from me then, I'm just up in Dundee

[@testlogs9005]

got a good portion of my family live in dundee hahah, i am from the dunfermline area.

[@nicosgamingandfirealarms3536]

Hi I love fire alarms

[@connorwelsh1]

THANK YOU. its ,y first time hearing that test message

[@dariusparker894]

Yay youre back

[@testlogs9005]

never left.

[@obsirensandalarms]

i remember asking when system test 27 was coming out on discord 😂 time really flies

[@testlogs9005]

does indeed.

[@obsirensandalarms]

@@testlogs9005forgot to say, very nice test mate!

[@Big_Noob-ROBLOX]

When's test 29? I might had been waiting long

[@bowsersean8098]

Connor when you got a new caravan is that the same smoke detector from the old caravan?

[@bowsersean8098]

Connor you forgotten to put test 27 and this video in the fire alarm test playlist 😢😢

[@bowsersean8098]

Connor why did you broke the glass on the call point?

[@The_VampireDevil]

I Love Your videos, How do you wire them

[@Elliotgh2]

Can you do some hochiki fire alarm tests but not on the house system because on new system test 22 i saw you say that you cant wire them in the full house system so can you do it on a board ore something like that

[@Eurospotter58]

Hello. I have been wondering when system test 29 will be out as I am super exited for it. You were the reason I started to take interest to fire alarms and have now got my own AlarmSense Apollo system with a kentec Sigma CP panel. It’s lots of fun to play around with. Anyway, please respond ☺️. Many thanks . Sam

[@The_VampireDevil]

I'm in a hotel right now and the smoke detector is a .:::XP95 Base sounder & an Discovery Multisensor!

[@carolannekerr5729]

When will you post test 29 and did you take the voice sounders down

[@ElliotMacpherson-go5lz]

😢sorry tl the voice alarm broke

[@XFP5777]

lets go

[@bowsersean8098]

Connor when’s test 29 coming?

[@JC09_lvp]

Hello again testlogs , 2 things , 1) are you sounder bases XP95 or Discovery / intelligent? - dont read the rest is there discovery. 2) How do you get the XP95 bases to do alert tone when in pre-alarm? ^^ I've serched all over loop explorer and I just cant seem to find an option to do that. Ive got the sounders to sound when in pre-alarm but i need them to do the alert tone. Please help if you can.

[@Jakefirealarms]

Hello Testlogs, I am working with the same voice sounder as you but i cant seem the make it do the voice messages , would you remember how to make it do the voice messages?

[@C3co_3]

When will Addressable system 29 come out?

[@carolannekerr5729]

Is the kitchen voice sounder going to be taking down

[@Stickman_studios2]

Awesome

[@bowsersean8098]

Connor when the shed used to be a smoke detector. Why did you replace it for a heat detector instead of a multi sensor

[@testlogs9005]

the use of the space changed where a smoke detector caused issues. it can go back to being a smoke detector now tbh as its just used for storage.

[@bowsersean8098]

Connor why is the smoke detector in the caravan hanging on the microwave handle

[@testlogs9005]

its the highest place to hang it without agro.

[@RRStuff]

What are your favourite and least favourite fire systems

[@testlogs9005]

That’s a question too complicated to answer because I judge based on many parameters. Also need to actually play with it to have an opinion and I have only ever messed with conventional, apollo intelligent Gent intelligent and hochiki intelligent.

[@yflfirealarmvids3126]

3:15 the same thing happened on one of the sounder beacon base at my school so here's the truth so the fire alarm went off at 12:40 but one of the sounder beacon base is not working it is on a discovery smoke detector hooked up to a advanced mx4 and a mx5

[@Worldwidetransportandlifts]

Oh dear

[@Worldwidetransportandlifts]

My school is having the fire alarm system replaced from protec with appolo, so this week its appolo on the ground floor but the 1st floor is still protec divises. All the appolo detectors are multipoints, they are heat and co2 at day time and smoke at night time, and i have the same appolo call points as you in yore shed and utility room, and the sounders are the same as what you had in the garage on test 3 (not shure if you remember) but they flash.

[@ElliotMacpherson-go5lz]

You spelt Apollo wrong 😑 😂

[@Worldwidetransportandlifts]

@@ElliotMacpherson-go5lz Oops

[@bowsersean8098]

Connor when you fix the voice sounder in the garage. Can you show the voice sounder and beacon in the garage when you set the cardboard monoxide alarm off?

[@testlogs9005]

its now an xp95 open area so. for now probably not.

[@bowsersean8098]

Oh ok. Is the beacon still there?

[@testlogs9005]

@@bowsersean8098 yes

[@Goodtimes2021]

When it breaks it’s a voice

[@Honekawasuneo646]

You wired it under ground?

[@GMDLgnd]

Im new to the apollo xp95 system. I find that the optical in my bedroom may be a little too sensitive. Is there a way to adjust how sensitive the optical is?

[@testlogs9005]

replace the sensor with a discovery one if your panel supports it. page 2 of the data sheet for the device shows the table with all the modes and what they do. you can change the mode from the panel.

[@obsirensandalarms]

is that sounder beacon base in the kitchen discovery? just while the test message was going it was only flashing unless it’s just a beacon base

[@testlogs9005]

xp95

[@obsirensandalarms]

@@testlogs9005sounder beacon base or just a beacon base?

[@AlfieMcmaster]

When can you make another video

[@therandombrandan942]

System test 28 I’m the first one in the comment section

[@Ramdonguy123]

Nobody cares

[@BusBoysBusChannel6091]

Have you got the voice sounder working yet?

[@testlogs9005]

its working but its not going back up its part of the test bench now

[@BusBoysBusChannel6091]

@testlogs9005 Ahh ok. by the way I am subbed

[@testplayer564_offtopic6]

Holy it’s been 6 months already!

[@testlogs9005]

i realised that when i checked the last video :S

[@testplayer564_offtopic6]

@@testlogs9005oh but why you stopped?

[@testlogs9005]

@@testplayer564_offtopic6 busy :)

[@testplayer564_offtopic6]

@@testlogs9005 oh I see

[@nostalgicgameplay2000]

did you manage to find the problem with the garage sounder ?

[@testlogs9005]

yeah, i am going to put it down to a programming error. its been replaced with a XP95 open area for the time being.

[@FinleyMyboe_2]

@@testlogs9005 is that the old garage sounder where the strobe was. and also how come you changed the call point from the apollo call point like the shed and changed it to the discovery one but didnt tell us?

[@trinityadam]

Hello. Do you Sill have any White Break glasses with Break Glass Press Here on ? thanks adam

[@testlogs9005]

i have about 5 of them. 1 is in a call point already.

[@trinityadam]

Is there any Chance i can Buy them from you ? As i Like collecting them style glasses. Even if i buy them for the same price of new ones ? thanks adam@@testlogs9005

[@IanGSully]

To be honest, I do miss the old sounder that was in your garage before. But I still feel bad that the newer sounder in there is shot.

[@testlogs9005]

Turned out to still work. I am doing away with the voice souders in time they don’t sync with the rest of the system and it’s doing my head in haha 😂. I will keep them for a demo rig.

[@JC09_lvp]

my pc won't detect my syncro when I plug it in any suggestions as to why please? - Answer - Make sure the comport is selected as the same one as your computer

[@testlogs9005]

all i can say is some usb to serial converters dont work, or dont work well with the synchro. its expecting RS232 that standard is logic levels that go -12v to +12v those little adapters you can get that convert the USB to serial or most likely for the cheapy ones TTL serial which ranges from 0v to 5V or 0v to 3.3v, now these can work but they need to be set up right and if the adapter does not have a utility to modify the signals to be inverted its likely going to give you trouble. ie panel not showing up in the software. thats one possible issue your having. the other issue you could be having is your not telling it which com port to use. loop explorer can see com ports 1 to 8 so if your adapter is showing up in device manager as something out of that range your gonna have to set it to a com port in that range in device manager then set it to that port in loop explorer.

[@JC09_lvp]

@@testlogs9005 I have fixed it I had the wrong com port selected. But while I have you , I have the same sounder as your voice sounder but without the voice but I want it for the alert tone only but I can’t get the alert tone for some reason. I’ve tried using loop explorer, no luck there so I emailed Apollo and they said in order to have the alert tone active it needs to be set via panel. We have the same panel would you know how to do that? Also when the panel goes into pre - alarm , all of your sounders go on alert tone and when in Fire then go evacuation tone , how do I set my sounder bases/ beacon bases to do that? I have loop explorer version 6. Also another issue , whenever I change my addresses on my devices , the panel does not register the change even when auto learned or manually learnt. Even a second hand sounder that was address 25 is showing up on the panel as 126 when it hasn’t been changed - if you can help with my problems that would be amazing. Thanks

[@Worldwidetransportandlifts]

Are there any changes to the fire alarm system?

[@testlogs9005]

not really. i do have a video in the pipeline.

[@Worldwidetransportandlifts]

@@testlogs9005 kk

[@LegoMaster-tn5rl]

Why do you have 2 sounders in the kitchen?

[@gamingwithwilliamyt1341]

One is a beacon only base without a sounder

[@bowsersean8098]

Because the heat detector doesn’t sound so he hidden a voice sounder behind the Cupboard so that many people thinks the sound is coming from the heat detector

[@tedgaskell4151]

Funny fire alarm panal control

[@valentinoschristofi]

Been watching since you’re name was different on the other channel, i think you got to 28 then stopped

[@Jake-vl4gm]

Apollo Fire alarm

[@Jake-vl4gm]

F

[@Ethanlow14]

Please leave the buLDING OOOOOOOOWWWWWWW

[@serialshitposter186]

I had once made an xp95/discovery demo board for my apprenticeship. I found the multisensors very very hard to set off. They were pumped full of solo but nothing happened.

[@testlogs9005]

They are designed to have some sort of intelligence to try and send actual fire signatures, ie temps going up as well as smoke. There is a smoke level threshold that if you maintain smoke for long enough it will trigger.

[@serialshitposter186]

@@testlogs9005 ah makes sense. I probably forgot to set the values. Anyway. Awesome video.

[@testlogs9005]

@@serialshitposter186 default is usually mode 3. The data sheet for the device gives more info on what each mode does.

[@christinecampbell9348]

R.IP sounder I the garage. 😂😂😂😂😂😂

[@bradleywest1984]

Wot but 29 🎉

[@gamerboy12970]

make another video

[@itzcarlito3142]

19:3

[@ArgoSAABArgoFireSecurityMan5]

oh no! the garage sounder decided it is time to die. Possibly loose wire or being a shit that does not want to respond. what was the outcome of that sounder

[@testlogs9005]

The sounder was actually fine it was just the panel playing funny, like it did with the dining room sounder. Restarting the panel fixes the issue. Still not ideal either way I found that out after replacing the sounder with an xp95 open area. Aw well.

[@ArgoSAABArgoFireSecurityMan5]

@@testlogs9005 reminds me of my vista panel having it’s RF reciever fail and require a restart because of no battery. Annoying

[@user-xv7ju6jb8u]

This sounds like the same fire alarm in my school umm nice job man I really don’t care

[@Ethanlow14]

PLEASE DO NOT PLAY GAMES

[@BrianLow-og9xx]

YOU DARE

[@nicosgamingandfirealarms3536]

13:18 why did you take the whole thing off . 🫤

[@JC09_lvp]

Hello again test logs , My Discovery sounder was up inside the same room as the panel , after running a weekly test on 2 call points it’s was all fine but after resetting the panel I got a fault. I was confused. I looked at it and it said “internal fault”. The device was still working / sounding like it’s meant to do but it kept saying internal fault. Do you know what could have caused this? Do you know if there is a way to fix this? Do I just buy a new head? If you want photos of the wiring ect please send me your email. Thanks - Overload

[@AlfieMcmaster-yb6dv]

When can you make another video