How To Install Carplay & Android Auto Module on Peugeot 508 - EBILAEN

[@AdrianDragan]

➢ Links: - Android Auto, Apple Carplay Wiereless Module EBILAEN (DISCOUNT CODE: YTPEEB) Peugeot (308, 408, 508) Citroen (C4, DS4) SMEG SMEG+: s.click.aliexpress.com/e/_DDbAnZ7 - 9 inch Android Multimedia for Peugeot 508 RT6: s.click.aliexpress.com/e/_DeY26zR - 10.33 inch Android Multimedia for Peugeot 508 RT6: s.click.aliexpress.com/e/_DkNNgOp - 7 inch original like Android Multimedia for Peugeot 508 RT6: s.click.aliexpress.com/e/_DlLnFCZ - Torx T20: s.click.aliexpress.com/e/_APlYFZ - Professional Car Door Trim, Radio Removal Tools: s.click.aliexpress.com/e/_99ishN

[@bbobenoit9940]

Discount Code doesn't work

[@goran.jovanovic]

Hello, I have just finished installing Wireless module as per Adrian instructions. It took me some more time that it took him but as video was really good no problems. I just want to add that when you are returning frame you need to move module as close to yourself or edge of the frame as possible. That is because if you don't do that you are not going to be able to place the frame or 10 Inch screw in the place. Also after install you need to go into the settings of the infotainment of the CAR and find audio settings and move AUX to LOW/FAIBLE because if you don't you might not be always to turn on AUX (its going to be grey). Otherwise great instructions and great video. Follow and no issues with installation!!! Thank you Adrian!!!

[@AdrianDragan]

Thank you for your tips and appreciations.

[@techdronenormandie]

Hello, I can't get the aux, or pay it in the car I didn't find

[@droidogab]

When you do the installation it seems to be simple. In my opinion you're just gifted! Thank you for this video, also for make me want to do by myself.

[@AdrianDragan]

Glad it was helpful!

[@stephaneislistening6103]

It would be nice to have information on these cables connected to the back of the SMEG box, explaining what they are for each color.

[@AdrianDragan]

Hello. You can find the Pinout diagrams for SMEG here in my blog: diyrepairs4car.blogspot.com/2023/02/smeg-pinout-radio-peugeot-citroen.html

[@emil-fredi]

Salut, am un Peugeot 508 din 2017 cu multimedia SMEG 5.41 si am cumparat un modul android auto EBILAEN in noiembrie 2023. L-am montat pe masina in decembrie 2023, cu mare atentie. Totul a decurs foarte bine pana la proba finala! Pe parte video si conectivitate wifi si bluetooth a fost ok dar pe parte de sunet unde este mai important, redarea intre modulul android si interfata originala a masinii care se face prin AUX, FUNCTIONEAZA DOAR PE UN CANAL(canal stanga). Am verificat cu multimetrul cablurile de semnal audio ale modulului si sunt ok. Am verificat sistemul original de AUX prin mufa jack al masinii si este ok(se aude pe ambele canale). Am verificat tot ce se putea pe parte de hardware! In concluzie: Sunetul intre modulul EBILAEN si multimedia OE a masinii se face doar pe un canal! Daca ai o solutie,........ Multumesc!

[@AdrianDragan]

Salutare! Dupa cele descrise de tine ma gandesc doar la faptul ca ar fi o problema a modulului. Ai incercat sa descrii problema vanzatorului? Sa-i trimiti un filmulet, sper sa te poata ajuta. Nu mai retin exact daca modulul are iesire auxiliara audio (rca), ar fi o varianta sa scoti sunet prin mufele de iesire audio auxiliara si sa te conectezi la mufa jack AUX a masinii. As vrea sa ma tii la curent daca reusesti sa rezolvi cumva.

[@MiguelArky85]

Hello, can you make calls on the Android Auto, and the sound of the call comes from the car speakers? without conecting the AUX? Thanks

[@fuze101undertaker]

Hello, amazing installation video. I am hearing popping and cracking sounds when using audio after installing the module. I also have a warning light on the dashboard saying there is an electrical fault and car needs to be repaired. This makes the service light come on. I hear lots of static when I switch to reverse camera too (sometimes video looks static and not smooth) I sometimes smell burning inside the car too. Do I need to reinstall/remove the module or is this normal? I am slightly worried as am not sure if this is causing an issue to my car battery. Thank you.

[@AdrianDragan]

Hello. I had none of these problems on the 508 I installed this module on. However, if you say that there is also a burning smell, there seems to be something wrong and I strongly recommend you to remove the module and check if it is the problem. Do tests with the module connected to the multimedia but without putting it in the dashboard.

[@sadkingbilly]

Is this also usable in the 2016/2017 308? Will airco and original menu/controls (fuel use, mileage left) still be accessible? Thanks! Also, could you make a video on how to install and connect speakers in the rear doors? 😅

[@AdrianDragan]

If you have a SMEG or SMEG+ multimedia system, it also works on your car. All the functions of the original multimedia system are preserved, if you watch all my videos you will understand 😉 For which car do you want me to make a video about the rear door speakers?

[@IvoV.]

Hey, i'm thinking of getting this for my 2015 Peugeot 508 with SMEG5.2 system. Couple of questions: - Is it compatible with this version of SMEG? - Since I'm using Android, Is it able to connect just through Bluetooth or does it need a cable/wi-fi connection? - Are all of the buttons on the steering wheel working while using the Android Auto? Thanks in advance!

[@AdrianDragan]

Hello. - It is compatible with SMEG, see in my video; - Android phone is compatible with this module for Bluetooth connection, WiFi (Android Auto Wireless for phones with Android version over 11) and cable connection; - You can use the buttons on the steering wheel to navigate through the module menu or in the Android Auto & Carplay menu. I hope my answers help you.

[@IvoV.]

@@AdrianDraganThanks again!

[@DIY-Mechanic]

HI, thanks. how is the bluetooth working? the original one has a 3-4 seconds delay. after installing the EBILAEN one. is that any different?

[@AdrianDragan]

Hi. Using bluetooth through the Android Auto / Carplay module, there is no delay.

[@balintbesi8603]

Hi Adrian, Thank you so much for the video, with your help I was able to install the unit and it works perfectly! (Liked and subscribed) Just one question: I have a factory reversing camera, but when I put the car in reverse, the screen does not change to the camera screen, I have to switch to the factory screen in order to see the picture of the camera. Could you help me what could be wrong? Thank you so much if you can help me out, would be highly appreciated!

[@AdrianDragan]

Hello! From what I can see, in some cars, the automatic switching to the camera image does not work when shifting into reverse gear, in others it does. Theoretically, you have to pull a cable from the reverse lamp (the positive cable) to the Android Auto / Carplay module and connect it to the cable of the module on which "REVERSE" is written. Probably in the future I will make such a tutorial but on my Peugeot 308 car, in practice it is the same operation on the 508. Thank you for your appreciation. ☕🍵 If this video tutorial was helpful to you, you can press the "Thanks" button to buy me a coffee 😊

[@balintbesi8603]

@@AdrianDraganThank you for your answer, that video is a good idea! Enjoy your coffee! 😉

[@Ahmad-zv7el]

Hello, I don't have a touchscreen multimedia system, where can I purchase one like yours? I don't want a tablet as I prefer a screen just like the one in the video, I have a 2015 peugeot 508. thanks

[@AdrianDragan]

Hello. Does your 2015 car have RT6 multimedia with a non-touch screen? I think the best option would be to upgrade to the original SMEG system or best to an original NAC system because it also has Android Auto / Carplay. On ebay I think you can find sellers from whom you can buy these systems, or look for car dismantling parks in your country.

[@goran.jovanovic]

Hello Adrian, could you be so kind to help me with some info. I have installed this and everything was great but now after update of the iPhone on 18.1 I can not connect to system. Do you have any suggestion or info regarding this?

[@AdrianDragan]

Hello. Go to the list of connected phones from the module menu and delete all the phones there. You can also do a factory reset of the module. If it doesn't work, I think you should ask the seller of the module. Cheers

[@benagilholidays793]

For my 2015 Peugeot 508 SW with SMEG5.2.A.R9 I want to buy CarPlay module. Can you please send me the link for the exact module I need to buy for this version? Thank you.

[@AdrianDragan]

Hello. I don't know the country in which you live, but I will leave you a link to buy with delivery from Poland (Europe) or with delivery from China. When you buy, you must choose "Color: For SMEG". You can use the code MOD8ULE for an 8$ discount in the shopping cart if you buy using my link. - Delivery from Poland: s.click.aliexpress.com/e/_DkCQYxl - Delivery from China: s.click.aliexpress.com/e/_DCV1g0P I hope I helped you.

[@benagilholidays793]

Thank you very much. I have ordered the product!@@AdrianDragan

[@marjanbonev6837]

Would you recommend the module instead of a whole display replacment? Do you have long term experience with any of the 2 options module vs. whole display? Thanks

[@AdrianDragan]

Hello. I prefer just adding the module to the original multimedia, so keeping the original screen. If the multimedia system does not allow the installation of the module (first generation Peugeot 508), then you can put a dedicated 9 inch Android tablet: s.click.aliexpress.com/e/_DE3hWrJ

[@davidmendes4300]

Hello Adrian, do you like the sound quality? I'm having some problems, the sound is not clean 😢, I think it's the connection between the power cable, so I ordered a new one (power cable)... I hope it works. Thanks for the video

[@AdrianDragan]

Hello. The sound is of the best quality, I have no problems. Check the connections and if the problem persists, talk to the seller. Send him a video explaining the problem.

[@davidmendes4300]

​@@AdrianDragancomparing the module Bluetooth and original media, the sound has nothing to do

[@AdrianDragan]

@@davidmendes4300 I had no problem with the sound quality on my Bluetooth module, It works great!

[@p1start]

Awesome video! This module work to Peugeot 408 Griffe 2013?

[@AdrianDragan]

Hello. If you have the same type of SMEG or SMEG+ radio, this module also works on your car.

[@paulolourenco1905]

Hi Adrian, Could you post a video of installing the carplay module in a Peugeot 308 with a CD player, I don't have space in the glove box. and I would like to know the best place to put it, as shown in this video Peugeot 508. Thank you

[@AdrianDragan]

Welcome. I'm sorry, but I don't have a Peugeot 508 with a CD player. I understand that the space is limited and you have nowhere to install the module. Would there be space to take the module to the dashboard area under the steering wheel and put it there?

[@matrak10]

Hi. Congratulations, Nice job RT6 RNEG2(Joy Stick version), does it work? Or is there a different module? Thank you.

[@AdrianDragan]

Hello. I don't know if it is a compatible module for RT6. The only option is to replace the entire original multimedia system with a dedicated Android tablet (I have not tested it): s.click.aliexpress.com/e/_DCVY4nF

[@ondratymrak5873]

Hello, I install this modul and rear camera and sensor works good but when I go forward I hear only sound from front parking sensor (not on display). Is it normal or Is there some option to fix it?

[@AdrianDragan]

Salut. Da, este normal sa functioneze asa deoarece cand bagi in treapta de mers inapoi modulul stie ca trebuie sa comute pe senzori si camera, dar cand mergi cu fata si senzorii detecteaza obstacol modulul nu mai stie ca trebuie sa comute pe afisarea senzorilor. Pentru mine acesta nu este un impediment deoarece am averizarile sonore suficient de clare.

[@unknown_device687]

Hi, thanks for a great video. Will it work on the 2012 508 where display has no touchscreen?

[@AdrianDragan]

Hello. The module is not compatible with the multimedia system that don't have touch screen.

[@relentlesspursuit6260]

Any recommendations for a non touchscreen display ?

[@AdrianDragan]

Hello. This is a very good option (I recommend version S5): s.click.aliexpress.com/e/_mPBtchc (Europe delivery) China delivery: QT10 recommend: s.click.aliexpress.com/e/_m0iMqvG (China delivery)

[@TheLastBastions]

Hi, would this be supported if my car has RT6 (RNEG 2.86.B.1) on a 2013 peugeot 508 allure sw hdi? Thanks :)

[@AdrianDragan]

Hi. Not compatible with RT6.

[@You-bs9pr]

Buenas tardes, a mi me instalaron un interfaz igual que el que has puesto tú, se conecta y se ve el video,GPS pero no se oye el auxiliar, por si me pudieras ayudar, gracias de antemano

[@miguelmunoz4010]

Hola, muchas gracias por este video, me ayudó a decidirme e instalar se me hizo muy fácil gracias a el. Sin embargo la cámara de retroceso no me funciona, el carplay detecta la reversa pero solo me muestra los sensores incluso si estoy en el menú de la radio. si conecto directo a la radio si funciona la cámara de retroceso.

[@AdrianDragan]

Bienvenido. Desafortunadamente, no conozco una solución para este problema, así que envíe un mensaje al vendedor al que le compró el módulo y explíquele el problema. Envíale algunas fotos o un vídeo, le ayudará a entender el problema.

[@miguelmunoz4010]

Gracias ​@@AdrianDragan me comunique con vendedor y me envió un arnés nuevo, cuando lo reemplace les comento.

[@miguelmunoz4010]

El arnés nuevo llegó en tan solo 5 días a Chile, lo cambie y funciona perfecto!! Encontré otra forma más sencilla para intercambiarse entre la radio original y el carplay, en la palanca del intermitente hay un botón push, si lo presionas 3 segundos se intercambia, si lo presionas y lo sueltas se activa el ok Google

[@rashad24playa]

Hello Adrian, I have a question about sound. Will I need to make AUX ON every, single time? Or should I make it once and then should be that permanent.

[@AdrianDragan]

Hello. In Peugeot cars, every time you start the engine, the source of sound on multimedia it will switch to FM Radio, you will have to change to AUX every time. But I think that if you put a 3.5mm jack in the car's AUX IN port, it will remain set to AUX s.click.aliexpress.com/e/_DEtAai1 I haven't tried it, but other users have said that this trick works.

[@rashad24playa]

@@AdrianDragan Thank you very much for quick response:) Well without this trick it's a little inconvenience, especially when you need to often stop and leave your car. :(

[@AdrianDragan]

@@rashad24playa I will test these days and come back with an opinion. But, that plug doesn't have to be connected to your phone, it just has to be plugged into the car's AUX socket so that the car's multimedia remains on AUX IN by default. Anyway, I will test and come back maybe even with a video.

[@rashad24playa]

@@AdrianDragan Would be very nice if you could give an answer for those questions :)

[@miguelmunoz4010]

​@@AdrianDragandonde se encuentra ubicada la toma AUX IN del automóvil?

[@yassinn3702]

Hello i installed the module, everything works except my rear camera view, i check all of the cables they are all plug but nothing started when i put reverse gear can someone help me please ?

[@AdrianDragan]

Hello. Soon I will post a tutorial on how you can make the reversing camera appear. Have you contacted the seller to tell them about this problem? if possible, send him a video in which you demonstrate the problem.

[@diegocardozo2183]

Hi, I'm having problems with Phone Calls: the person on the other side of the line hear echo, and I think it is because both phone and car mics are open. Is there a way to solve this?? (I can disable original mic but people won't hear me well using my phone's mic)

[@AdrianDragan]

Hello. Go to the Module settings to Audio Settings and try to change it there, I hope you solve the problem.

[@josemrodrigues1972]

Hello I have just installed the module in my Peugeot 508m using your youtube video's steps. Everything is working normally, except for one detail: When I'm using Apple CarPlay and activate the reverse gear, the parking camera and sensors don't appear on the screen automatically. I have to exit the CarPlay module. The camera and sensors are active and working outside the CarPlay module. Can I set it up so that it automatically goes to the monitor? Thanks, Best Regard!

[@AdrianDragan]

Hello. It seems that the canbus decoder in the module does not know how to make an automatic switch when you put it in reverse gear. The solution is to pull a cable from the reversing light that will act as a trigger for a relay that will give a signal in the mode on the cable marked with REVERSE. I did this job for my 308 and in about two weeks I will post the video on how to do it.

[@josemrodrigues1972]

Thanks for the clarification, I'll wait for the video to try and implement it. I'd like to take this opportunity to ask you another question, without wishing to abuse you. When I start the car, the car's original system connects directly to the FM radio, is there any way of changing this to connect directly to Bluetooth? Thank you. @@AdrianDragan

[@AdrianDragan]

@@josemrodrigues1972 Unfortunately, I don't know if there is any setting for the multimedia system to start on Bluetooth every time you start the car.

[@a.au.3200]

@@AdrianDragan Hi Adrian, I am also interested in how to wire the cable for the rear view camera on the Peugeot 508. Have you already completed the video? If so, I would be grateful if you could post it. Thank you.

[@impaelas]

Hi. Can you play music without the cable connected between phone and the unit? Thank you.

[@AdrianDragan]

Hello. Of course you can listen music on the multimedia system via Android Auto Wireless or Carplay Wireless, without having a cable connected.

[@ondratymrak5873]

Hello, Is possible connect DAB + receiver (for android) to usb and listen DAB+ radio?

[@AdrianDragan]

Hello. It is not possible to connect a DAB + receiver to the USB module and have it work. But if you install the module you will have access via Android Auto and Carplay to a lot of online radio stations at the best audio quality, I don't see why you need a DAB receiver.

[@goran.jovanovic]

Hello Adrian. I have just received module and I was wondering if you can tell me how can I prevent module from moving around while driving. Would hate to hear it jumping around that place after I close everything and I go over some potholes?

[@AdrianDragan]

Hello. I think you can lock it with some sponges placed on the sides.

[@andrascosmin5510]

Buna adrian..cat mar costa aparatul si montarea peugeot 508.. poti sami spui an ce oras esti.o zi buna

[@AdrianDragan]

Salut! Sunt din Tulcea. Aparatul poți sa ti-l comanzi de pe Aliexpress cu livrare din Polonia și vine în aproximativ 7 zile: s.click.aliexpress.com/e/_EJ6XIxB Montajul costa 200 lei dacă te deplasezi pana la Tulcea, sau poti sa-l montezi singur urmând instrucțiunile din clip.

[@edgesport7103]

Hi Adrian, do you know how to activate AUX on a peugeot 508 with smeg? I bought this module, but the AUX output is inactive.

[@AdrianDragan]

Hi. Connect your phone to the module and play the music from the module screen (Android Auto or Carplay), then go to the menu and you should find the option Aux active.

[@edgesport7103]

@@AdrianDragan In the module menu?

[@AdrianDragan]

Just play music from Spotify or any other app for music, when your phone is connected to the module.

[@edgesport7103]

Hi Adrian, Does this module work in all versions of SMEG ,mine does SMEG5.1.F.R4 , Peugeot 508.

[@AdrianDragan]

Hello. Works with all SMEG / SMEG+ multimedia versions.

[@edgesport7103]

@@AdrianDragan Thank you

[@MrTadiz]

hi, does CarPlay opens automatically when i start the engine? or do i need to change it manually every time?

[@AdrianDragan]

Hello. Yes, wireless Carplay and wireless Android Auto automatically turn on when you get back into the car. You will only have to manually choose the sound source on Aux if you want sound from Carplay or Android Auto.

[@MrTadiz]

thanks!@@AdrianDragan

[@davidmendes4300]

I'm having trouble, it connects automatically, but the sound doesn't work. The aux option doesn't show on... Only did it once...

[@AdrianDragan]

Hello. It is necessary to have a sound source on Android Auto (let's say Spotify, KZbin Music, etc.) and then it will be active to be able to select AUX.

[@diegocardozo2183]

Just start a Music Player and play a song, then the Smeg system will enable Aux as an option. You can change different sound inpunt by pressing two times 'Source' button in the wheel

[@ahmedalmadfaa449]

I have problem that the voice of JBL system is shutdown all through the car is this a problem in the amplifier or how I fix it

[@AdrianDragan]

@@ahmedalmadfaa449 Hello. With JBL systems, even if you only have one speaker that doesn't work, the JBL amplification will stop. I recommend that you go to a service that has dedicated Peugeot diagnosis (Diagbox) and do a check. That way you will see what the problem is.

[@cutedude841]

I connected my android head unit but there is no sound in the speakers. Speakers were tested and they work just fine. But there is still no sound when the android unit is connected.

[@boooshannon]

After installing the carplay does it remove the audio delay ?

[@AdrianDragan]

Hello. You don't have audio delay through the Android Auto / Carplay module.

[@zeljkotasic4446]

Браво маестро

[@AdrianDragan]

Thanks!

[@ondratymrak5873]

Hello, Does it support navigation with head up display( when I run waze, shows directionn on head up display)?

[@AdrianDragan]

Hello. Information from the module cannot be displayed on the head up display.

[@alexdiaconu3189]

Salut! Senzorii de parcare fata sunt afișați chiar si atunci cand suntem in apple carplay?

[@AdrianDragan]

Salutare! Daca se activeaza doar senzorii din fata nu vor fi afisati peste Carplay, dar raman active averismentele audio.

[@dragosi8980]

Salut. Display-ul e original? Se vede foarte ok pt un display din anul ala...

[@AdrianDragan]

Salutare! Sigur ca da, este display-ul original al masinii.

[@adriantenne2919]

Pt montare camera în bara spate, trebuie activata din BSI la acest modul?

[@AdrianDragan]

Salut. Daca vei conecta camera direct la modul nu este necesara activarea în BSI.

[@adriantenne2919]

@@AdrianDragan multumesc

[@ondratymrak5873]

Hello, is it possible listen original factory radio when android auto is working?

[@AdrianDragan]

Hello. You can listen to the original radio and see Android Auto or Carplay on the screen, but you won't hear your navigation instructions on AA or Carplay.

[@ondratymrak5873]

Thank you.

[@deniszbatori2528]

Hi, can you please tell if this module would work on Peugeot 508, which does not have factory navigation and system version is SMEG5.41.B.R4? Thank you in advance

[@AdrianDragan]

Hello. The module is compatible with all SMEG touchscreen systems. Does your multimedia have a touchscreen?

[@deniszbatori2528]

@@AdrianDragan Thanks for quick answer. Yes, it looks same as display on this video, just when I hold Setup button to check the system version, I don't have option to check the map version, since I don't have a navigation. But ok, in this case it should work, like you said.

[@AdrianDragan]

@@deniszbatori2528 What year it is your car?

[@deniszbatori2528]

@@AdrianDragan 05-04-2016

[@AdrianDragan]

@@deniszbatori2528 Great, it should work.

[@mariuszkarch3479]

Hi Adrian The module Have RCA audio out ? Possible for car audio

[@AdrianDragan]

Hello. I don't know if the RCA plugs are for Aux IN or OUT.

[@marianmarian1821]

Buna ziua, pt. un 508 fara navigatie din fabrica, exceptand displayul, mai implica si alte anexe?

[@AdrianDragan]

Salut. Daca este tot model SMEG, nu mai necesita nimic altceva

[@marianmarian1821]

@@AdrianDragan nu are navigatia de fabrica.

[@ValonKrasniqi-f2l]

Hello, Can i put it on my 508 2.0 Hdi From 2013. thanks

[@AdrianDragan]

Hello. It only works if you have a touchscreen multimedia system.

[@sandustefan958]

Salut Adrian, ai idee daca modulul merge montat și pe un model de navigație o idee mai veche, mai exact eu am un Peugeot 508SW 2.0 HDI 2010 spre 2011 dar nu are aceeași navigație ca a ta, nu are touch și nu este updatata, merge montat modulul?

[@AdrianDragan]

Salutare! Modulul nu este compatibil cu navigatia fără touch screen. Poti instala o navigatie dedicata ca cea din următorul clip: kzbin.info/www/bejne/Z3fKg6GAoZJjo5Y

[@sandustefan958]

@@AdrianDragan Îți mulțumesc și keep up the good work 💪

[@MrAndrey693]

Salut, atunci cand porneste porneste direct in interfata modulului si trebuie sa iesi ca sa muti inputul pe aux sau il tine minte?

[@AdrianDragan]

Salut. trebuie sa muti pe AUX de fiecare data pentru ca unitatea originala nu retine optiunea AUX ca predefinita.

[@MrAndrey693]

@@AdrianDragan Salut, a ajuns jucaria si am montat-o pe masina, dar nu am sunet si optiunea de aux nu este disponibila. Am incercat sa pornesc sunet inainte, sa conectez jack in portul de aux al masinii, am legat iesirea de aux de la modul cu cea a masinii ... nimic tot nu este disponibila. Adica apare, dar nu pot sa o selectez. Am reusit sa pun muzica cu telefonul conectat la bt masinii, dar am acel delay idiot, iar alte sunete nu se aud in boxe, gen indicatii waze, notificari etc. Fac eu ceva gresit?

[@AdrianDragan]

Salut. Da-mi un mesaj pe pagina de facebook din descrierea clipului și continuam acolo discuția, e mai comod. Eventual o sa-ti las acolo numărul meu de telefon și ne auzim de luni. Sigur este o rezolvare.

[@semedao654]

Qual o tipo de dispositivo que daria para um 508 rxh?

[@AdrianDragan]

Olá. Veja qual modelo de multimídia seu carro possui, como faço no vídeo aqui: kzbin.info/www/bejne/omLRgpanZ9yXf6M Se o sistema multimídia for SMEG, escolha o módulo para SMEG. De que ano é seu carro?

[@sebastianm8283]

Bună Adrian. Deși eu am un 308, am urmarit acest videoclip ca sa vad diferențele sau îmbunătățirile modulului. Am observat ca acesta este la fel ca si cel pt 308 si functioneaza apriximativ la fel. Dar totusi nu inteleg 2 chestii. 1. La 508 camera din spate se conectează automat iar la 308 am înțeles ca nu e posibil. 2. De ce Apple carplay se conectează prin wireless iar Android nu? Iar o alta intrebare ar fi, ca intre acest tip de modul si cel cu "ecranul gros" care l-ai montat in alt videoclip pe 308,.care il consideri mai bun?

[@AdrianDragan]

Salutare. Eu acum folosesc un modul din generatia mai noua (gri) pe 308 si pot spune ca au imbunatatit convorbirile pe bluetooth, calitatea audio si stabilitatea conexiunii Wireless pe Android Auto. 1. Camera de mers inapoi la 308 tot nu se cupleaza automat dar se poate trece spre aceasta prin apasarea scurta a butonului touch "STAR" de pe marginea ecranului. Se poate face trecerea automata la camera de mers inapoi dar trebuie adus un fir de la plusul lampii de mers inapoi pana la modul si trebuie conectat la firul "Reverse" de pe modul. Cred ca voi face pe viitor aceasta operatiune si voi filma un tutorial. 2. Versiunea noua a rezolvat aceasta problema, Android Auto merge si Wireless. Ba chiar este enervant uneori deoarece nu poti dezactiva conectarea automata Wireless si de fiecare data cand pornesc masina trece automat pe modul Android Auto sau Carplay daca detecteaza ultimul telefon conectat. 3. As spune ca prefer modulul Android / Carplay pentru a pastra mesajele info de pe unitatea originala. Totusi acea tableta Android mi-a placut foarte mult, daca era capabila sa afiseze mesajele info si cele de avertizare spuneam de mult la revedere unitatii originale. Probabil voi mai testa si alte tablete pe 308, poate gasesc ceva care sa afiseze si mesajele. Inca un dezavantaj la tableta Android: daca ai sistem de franare autoamata (radar + adaptiv Cruise Control) acesta nu va mai functiona odata ce ai scos unitatea multimedia originala si ai instalat o tableta Android. Sper ca te-am lamurit :)

[@sebastianm8283]

@@AdrianDragan Am înțeles. Mulțumesc mult.

[@tourtransportexpress2004]

buna ptr navigatiile din 2017=2018 cele cu touchscreen stii ce modul trebuie cumparat ptr a da drumul la apps si la android auto si carplay?multumesc

[@AdrianDragan]

Salut. Ce model de navigatie ai? SMEG sau NAC?

[@MrBlackArrow96]

Salutare acest modul merge si pe un peugeot 508 2012 hybrid? Navigatia masini mele nu este cu touch....daca influenteaza acest lucru imi poti recomanda si o navigatie touch?

[@AdrianDragan]

Salutare. Din pacate modulul nu este compatibil cu sistemul tau de navigatie si datorita complexitatii sistemului hybrid si a interactiunii cu sistemul multimedia. O varianta ar fi sa-ti instalezi o unitate multimedia Android dedicata 508, dar nu pot garanta ca va functiona fara erori deoarece ai sistemul hybrid: s.click.aliexpress.com/e/_DDi2Q93 Alta optiune este o tableta DVR ce este compatibila si cu Android Auto sau Carplay Wireless: s.click.aliexpress.com/e/_DdRBGN3 Aceasta din urma se conecteaza pentru sunet la unitatea originala multimedia prin radio FM sau prin cablu audio Auxiliar si functioneaza independent de multimedia masinii. Am achizitionat un astfel de device DVR cu Carplay si Android Auto si pe viitor ii voi face un review. Daca vrei sa instalezi oricare dintre cele propuse de mine sunt dispus sa te ajut cu montajul gratuit daca te poti deplasa pana la Tulcea.

[@MrBlackArrow96]

@@AdrianDragan Multumesc foarte mult de raspuns. daca me decid la una din aceste optiuni o sa te contactez. Multumesc mult. Spor in toate.

[@AdrianDragan]

@@MrBlackArrow96 Cu placere. Sa ne auzim cu bine!

[@iulian3078]

Salutare! Stii cumva daca este compatibil si cu sitemul JBL al masinii?

[@AdrianDragan]

Salutare. Modulul este compatibil cu sistemul original JBL din echiparea masinii.

[@jefflangdon2152]

Worked great

[@AdrianDragan]

Thanks!

[@AtanasKostov-y2i]

Hi, my aux is not active and does not have sound fron android auto, can you hepl me

[@AdrianDragan]

Watch my video at minute 17:26 and follow the steps.

[@TURBOTIGRE]

Salutări! Am un 508 sw 2011 Ecranul nu este touch. Sistemul este rneg2.20.e.5 Se poate pune egal dacă nu este touch? Mulțumesc mult pentru video.

[@TURBOTIGRE]

În caz că nu se poate cu sistemul 2011 Rneg, poți să-mi recomanzi unul ecran touch care se poate folosi bine? Și aș vrea și o cameră în spate. Am iPhone. mulțumesc mult

[@AdrianDragan]

Salutare. Modulul din clipul meu nu este compatibil cu sistemul tau multimedia RNEG. Dar poti instala o unitate Android dedicata ce inlocuieste actualul ecran: s.click.aliexpress.com/e/_DkiGxEb Am primit deja o astfel de navigatie (Octa Core, 6Gb RAM, 128 Gb memorie interna) si am vorbit cu cineva sa o instalez pe 508-ul lui din 2011. E cumparat din link-ul de mai sus. Daca o voi instala la el sigur voi filma si un video tutorial. Iata cateva poze in teste pe birou: photos.app.goo.gl/hChKsoZFgoYVUoVB6

[@tomasvymetalek8790]

hi i have the software SMEG5.2.C.R1 / CD 26050 / Z: 08-01-15 Peugeot rxh 133 kw. Will it work for me? Will I also be able to watch KZbin? Movies? You probably don't speak Czech, do you? Thank you for your response. Tom

[@AdrianDragan]

Hello Tom. Yes, the module is compatible with your car. You can watch movies stored on a USB stick connected to the USB socket of the module, or you can do Screen Mirror and see the phone screen directly on the multimedia screen, of course using this function in the module.

[@ZbigniewJanowski-j6e]

Adrian jaki ściągnońć karplej do do android auto do peugeota 508 system smeg

[@AdrianDragan]

Cześć. Jeżeli posiadasz w swoim aucie radio SMEG to musisz zainstalować moduł z filmiku aby mieć Carplay i Android Auto.

[@davidmendes4300]

Brother, can you help me connect reverse camera? I can't wire it properly...

[@davidmendes4300]

It doesn't have camera from factory...

[@AdrianDragan]

Hi. In the link is my guide for installing the Peugeot 308 rear camera, it can also be the same for the Peugeot 508 when you connect to the Android Auto Box: kzbin.info/www/bejne/raLFeWupaph7Y9U A good rear view camera: s.click.aliexpress.com/e/_DkBgvVf

[@floringlodean3416]

Navigația mea este diferită am un hybrid oare o sa funcționeze?

[@AdrianDragan]

Salutare. Ar trebui sa functioneze fara probleme deoarece modulul nu afecteaza unitatea multimedia originala.

[@trusKEFkowy]

It will be work with JBL radio?

[@AdrianDragan]

Hi. Yes, it works with JBL original audio system.

[@NepsteRomania]

Salutare. Am un 508 din 2011, dar navigatia e fara touchscreen si nu am acel buton de SETUP. Cum pot afla ce versiune de sistem am? Totodata, e compatibil modulul cu modelul meu? Mersi si spor!

[@AdrianDragan]

Salutare. Daca navigatia ta este fara touch screen nu poti monta acel modul. Totusi ai doua optiuni: 1. Instalezi un sistem complet de generatie mai noua, original Peugeot (NAC) care este perfect compatibil cu masina ta dar te costa undeva pe la 500 euro + montaj: www.olx.ro/d/oferta/nac-navigatie-peugeot-508-applecarplay-android-auto-inlocuieste-rt6-IDeRACB.html (anuntul nu-mi apartine, este dat ca exemplu de unde poti cumpara). 2. Instalezi o navigatie cu Android dedicata pentru Peugeot 508, va prelua marea majoritate a comenzilor si afisajelor actualului sistem multimedia de pe masina, daca te intereseaza eu am o astfel de navigatie cu Android si pot sa-ti fac montajul gratis, eu am cumparat-o de aici (a costat aproximativ 200 euro): s.click.aliexpress.com/e/_DlGbjez Daca vrei mai multe detalii poti sa-mi dai un mesaj pe pgt.adrian @ gmail.com

[@dromzu]

Hi. I can't choose av in option for sound source, even I am playing a song in Spotify.

[@dromzu]

The aux option sorry

[@AdrianDragan]

Hello. I don't know what the problem would be if AUX IN is not displayed, I just think that the plug that goes to the original radio unit is not properly connected. you can try to connect a 3.5mm jack to the AUX connector you have in the car, then see if it detects it.

[@techdronenormandie]

Hello, I have all installed, but I have the "aux" output that remains grayed out. I tried to put sound on Spotify but it remains grayed out. So no sounds. Do you have a solution?

[@AdrianDragan]

Hi. Go at the original multimedia menu to audio settings and choose the audio amplification for AUX on middle or High, I don't know now if this is exactly the path for those settings. I hope you solve it.

[@techdronenormandie]

@@AdrianDragan I looked for the settings in the original menus but there is no AUX sensitivity setting. Do you have a picture?

[@florinflo9826]

Salut ! Daca poti , ai timp , vrei , cat ma costa montajul unui sistem dedicat Android pt un peugeot 508 sw ( 2015 facelift cu navigatie din fabrica) nu are caera spate si as vrea si aceasta optiune , daca i mi poti da un pret total te rog ,mulțumesc frumos!

[@AdrianDragan]

Salutare. Da-mi un mesaj la email pgt.adrian @ gmail.com Daca faci o deplasare pana la Tulcea putem rezolva cu montajul.

[@andyszen5115]

Buna, o intrebare te rog, cand este in modul android si dau cu spatele apare camera sau camera de mers cu spatele apare numai in modul SMEG, original multumesc (Peugeot 308 SW Allure 2016 , adblue off)

[@AdrianDragan]

Salutare! La ultimul modul testat de mine în urma cu aproximativ un an pe Peugeot 308 nu făcea comutarea automata. Acum pe modelele mai noi vanzatorul spune ca ar fi rezolvat în mare parte compatibilitatea cu comutarea pe camera de mers inapoi când ești pe Android Auto sau Carplay. Totusi exista și o alta metoda prin care se poate face o un mic circuit cu un releu comandat printr-un fir alimentat de pe plusul lampii de mers inapoi ce face comutarea automata pe camera de mers inapoi când e băgat pe treapta de mers inapoi.

[@andyszen5115]

@@AdrianDragan multumesc frumos

[@adrianlepadatu8525]

Salutare! Am si eu nevoie de mai multe informatii in legatura cu acest car play. Cum am putea lua legatura?

[@AdrianDragan]

Salut! Ma puteti gasi la pagina de Facebook: facebook.com/profile.php?id=100082513732015

[@MrRGM10]

Hi does it fix bluetooth audio delay? I have 508 gt 2014 but my menu is different from yours what version is it

[@AdrianDragan]

Hello. Is the multimedia in your car SMEG or SMEG+? You can find out which version it is by following the steps in the video at minute 0:30. If you use the audio sent via the Android Auto / Carplay module with the AUX IN function, you will not have a bluetooth / sound delay.

[@MrRGM10]

@AdrianDragan car doesnt have setup button

[@AdrianDragan]

@@MrRGM10 Doesn't it have a touch screen? If it does not have a touch screen, it is an RT6 navigation model and the module is not compatible with it. The only option is to replace with a dedicated Android unit: s.click.aliexpress.com/e/_DErKKsZ In the next two weeks I will post a video about this Android navigation dedicated to the Peugeot 508.

[@MrRGM10]

@@AdrianDragan not touchscreen. Can i upgrade to touchscreen stock?

[@AdrianDragan]

@@MrRGM10 You can upgrade. I recommend you to upgrade to the NAC multimedia system, it includes Android Auto and Carplay, it is the most advanced system that was installed from the factory on the first generation Peugeot 508. Something for inspiration here: frenchcarforum.co.uk/forum/viewtopic.php?t=69891

[@johnny0a616]

Salutare! Modulul media de pe 2015 se potrivește și pe prima generație de 508?

[@AdrianDragan]

Salut. Se potriveste dar ai nevoie de modul, ecran, cabluri si codari cu diagnoza Peugeot.

[@nikolarimac3564]

Hello, can I use Google maps without connecting via usb? It is an android device.

[@AdrianDragan]

Hello. If your phone is a newer generation Android (not older than 3-4 years) you can use the wireless connection and by default you will have Google Maps on the multimedia screen without the need for a cable connection to the phone.

[@nikolarimac3564]

@@AdrianDragan Ok, thanks

[@ti9ski]

Android auto funciona wireless ?

[@AdrianDragan]

Hello. Yes, Android Auto and Carplay work wirelessly.

[@davidmendes4300]

Hi, my car doesn't have camera, can I install it?

[@AdrianDragan]

Hello. You can install, but if you want directly on the original multimedia, you must use original parts + activation with diagnosis (coding).

[@davidmendes4300]

@@AdrianDragan how can I do that? Can you please help me?

[@AdrianDragan]

@@davidmendes4300 Unfortunately, I have no way to make a tutorial for installing the camera because I don't have this car.

[@davidmendes4300]

​@@AdrianDraganI want to connect it on the carplay...

[@AdrianDragan]

@@davidmendes4300 You need a rear view camera like this: s.click.aliexpress.com/e/_DkBgvVf Pull the cable from the camera to the Carplay module. When you put it in reverse does the module switch to camera image?

[@wujo15]

Hello. Can i connect 360 camera?

[@AdrianDragan]

Hello. The module cables have an RCA cable that says 360, but I haven't tested it.

[@antonio...6249]

podría poner una cámara delantera el coche es igual que el tuyo

[@AdrianDragan]

Hola. Si ha instalado el mismo módulo Android Auto / Carplay que en mi video, puede instalar una cámara frontal que puede ver en la pantalla de la tableta, la cámara conectada al módulo.

For RT6?

[@AdrianDragan]

Hi. This are the Android Multimedia for Peugeot 508 RT6: - 9 inch Android Multimedia for Peugeot 508 RT6: s.click.aliexpress.com/e/_DeY26zR - 10.33 inch Android Multimedia for Peugeot 508 RT6: s.click.aliexpress.com/e/_DkNNgOp - 7 inch original like Android Multimedia for Peugeot 508 RT6: s.click.aliexpress.com/e/_DlLnFCZ

For peugeot 3008 2015 rt6

RNeg 2.86b

[@adriantenne2919]

La RT6 nu funcționează?

[@AdrianDragan]

Salut. Din pacate nu este compatibil cu RT6. Daca esti dispus sa inlocuiesti întreagul sistem multimedia poti folosi unitatea Android dedicata din link-ul următor (este exact pe dimensiunea ecranului original): s.click.aliexpress.com/e/_EJSWQsj

[@bosnianphysique8207]

New car?

[@AdrianDragan]

Hi. It's not my car.

[@balintbesi8603]

Thank you!

[@AdrianDragan]

Thanks! ☕

[@profesionalnivozac1714]

What about video in motion from usb?

[@AdrianDragan]

Hi. Playing videos from USB works even when you are driving.

[@lucasgarcia240]

Idioma en Español?

[@AdrianDragan]

Hola. idioma rumano.

[@Kolessso]

tHANKS

[@stefancaioan]

Bună seara v-am dat nr de tf îmi faceți un apel și va sun eu dacă vreți vă rog frumos mulțumesc ❤

[@AdrianDragan]

Buna seara, Unde ati lasat numarul de telefon? Puteti sa trimiteti un mesaj pe pagina mea de facebook: facebook.com/Adrian-PGT-DIY-Repairs-101561312503402