ADJUSTABLE KNIFE BLADE BEVELLING/SHARPENING JIG (EASY TO MAKE)

[@armenvondoms1815]

Finally!! An actual easier way! Thanks!!

[@orangetruckman]

Way to follow the kiss method! Thank you for sharing this clever thing.

[@guyhorsen]

Great

[@inkfx2009]

Just made one quick simple and does the job not sure why all the negative comments this is perfect for when you are just getting started

[@GAN369]

I agree with you nice and simple and does the job but as you know well, you can never please everyone, thanks for your comment, very much appreciated.

[@brucecampbellforpresident1393]

I made one like this and it works awesome I welded some square tubing on each end for handles an a flat piece of steel on the bolt for stability and off I go.

[@dojosai]

Very good job Thanks from Italy🇮🇹🗡

[@GAN369]

Thanks for your comment, very much appreciated.

[@IvanZehirov]

Thanks a lot! You rock brother

[@GAN369]

Thanks for your comment, all the best.

[@jadeddragon4254]

Lmao I was watching this and my wife said why do I hear porn music 😂

[@aasimshaikh9647]

With all due respect, how does she know that its porn music?😂

[@mr.mduweit8926]

Genie

[@GAN369]

Thanks for your comment

[@robertlangley258]

With just the one threaded bolt placed in the center, how do you keep the tool from wobbling to and fro?? Think it would be difficult to hold the jig level while pulling across the sanding belt. The more angle, by screwing bolt in further, you wanted would seem to exacerbate the problem. Please explain.

[@GAN369]

Thanks for your question, set the angle and then tilt the jig and put the weight to the front of the jig flat edge, its impossible for it to wobble as it rests on the long front flat edge providing perfect stability.

[@louisfourie7756]

What is the music for?

[@heugenelunsford9677]

Thanks for the suggestion.

[@heugenelunsford9677]

Thanks. Looks like you sanded the threaded end smooth with the angle iron and didn't adjust. Wonder if a piece of aluminum angle stock would work just as well.

[@GAN369]

I have an aluminium jig as well, absolutely no difference works just as well.

[@robertsmith616]

Would be perfect with bolt on each end for support

[@GAN369]

That’s exactly what I ended up doing with ball handles fitted to the bolts, well spotted and thanks for your comment

[@heugenelunsford9677]

So what's the point of inserting the bolt and locking nut if you're just gonna grind the end of the bolt level with the 1" bar stock? How to create the proper angle?

[@GAN369]

Adjust the bolt clockwise to raise the jig to your desired angle

[@jackrusselcrow]

i wondered the same thing... i think it may be due to the bolt itself sometimes they are not completely flat at the end so to make sure it is perfectly flat sand it flush with your bit of metal.

[@GAN369]

I have not seen a bolt with a perfectly flat end, that's why you grind it flat, you have answered the question. Its much easier to get the desired angle with the bolt being ground flat but to be fair it was probably overkill because you will still get a nice grind without flattening the bolt, its not essential.

[@williamskinner2732]

First time I've ever seen a linisher used with the back stop in position - didn't look very square though.

[@GAN369]

The backstop played no part in the process of flattening the steel, so the angle of it had no bearing on the final result and it wasn't used to create a right angle, it was left on to block the hot steel particles flying off the end of the belt grinder.

[@tommyd3jr]

GAN what is it with people and their bs questions? Is there a point to be proved? If not then fuck off

[@deanmarsh2544]

Back ground music so loud I couldn't hear a word you said.

[@GAN369]

No voice over on this video Dean, Just the sound track so you didn't miss anything, thanks for watching.

[@deanmarsh2544]

because I had a machine shop and precision sheet metal background I could understand what you were doing. I thought a novice would need to hear what was being said. Evidently this was for more experienced people. In that case good job.

[@CurmudgeonExtraordinaire]

"gan" (干) means "fuck" in Mandarin... Was that intentional when you chose that as a channel name?

[@007Jaredboy]

For one this is a bevel grinding jig not a sharpener; but more relevant: why are the bevel lines so uneven and wavy? you can clearly see they are uneven at the end of the video.

[@GAN369]

Your absolutely correct, that was the first knife I ever made and the first time using that bevel jig, the bevels were crap, well spotted, Thanks for your comment.

[@everready19373]

Killer porn music..... Seriously though, I like your build, clean simple, minimal moving parts.

[@Mr.Big-Gunz]

Left time the music started...how can anybody learn with that ear polution playing loudly...

[@GAN369]

That's possibly the most popular piece of music on any video I've uploaded, but it just goes to show yet again you can never please everybody, other than that I appreciate your constructive criticism and your comment, cheers.

[@moali1169]

Good vid... bad bad sound...

[@GAN369]

Thanks for your comment, very much appreciated, glad you liked the video.

[@moali1169]

@@GAN369 would be good to actually hear what you are saying. Maybe upload again without adding Music?

[@GAN369]

@@moali1169 There was no commentary.

[@moali1169]

@@GAN369 definitely sounds like you were talking lol

[@GAN369]

@@moali1169 33 videos in total on this channel and no talking in any of them, thanks again for your comment.

[@williamskinner2732]

Sorry mate, it's just that, as I said, I've never seen the back stop used before even after a long career in the jolly old engineering! I have a back stop for my own linisher, but as must be obvious by now, I never use it. Enjoy yourself mate! (from the UK)

[@GAN369]

No worries and no offence taken, you made a valid point and by the way I'm far from being an expert at this. Thanks for your comment

[@TheDanishka88]

nope.. this is not that kind of sharpener

[@rocschmidt4863]

Why do people think that having music then talk during the video is cool? Well, it's not. So I didn't finish watching it.

[@lordmaddrox]

Thats not him talking , its part of the music for some odd reason

[@wynandcrous8654]

M

[@OhNoItzClark]

Turn down the G-D Music!!! Couldn't hear a word clearly!

[@GAN369]

There is NO commentary on this video, thanks for your comment