Adjusting Ignition Timing on a 2 Stroke Motorized Bike (Updated)

  Рет қаралды 4,007

Keegan Hache

Keegan Hache

3 ай бұрын

Пікірлер: 17
@kellycollver1931
@kellycollver1931 3 ай бұрын
Thanks for the more updated content thats not years old
@keeganhache6667
@keeganhache6667 3 ай бұрын
No problem man
@Op1zilla
@Op1zilla 2 ай бұрын
This is the mod you where talking about, I like this better than filing the key-way, My blue bike has a filed key-way, I enjoy the Smolik plate , I use the flash cards they are thick are work perfect 👽👍🏻
@keeganhache6667
@keeganhache6667 2 ай бұрын
Yessir the keyway can easily migrate out of position if not tight
@bryduhbikeguy
@bryduhbikeguy 3 ай бұрын
Thanks for the tip.I have to ask about the paint on the case behind the magneto though.? I was given a bunch of grief because I actually used a stud into my frame to ground the wire from the magneto as they thought it useless. I use rubber to insulate my engine for vibration,and the frame's sealed against rust.I figure the better the ground the best.?. Never had a coil,magneto,nor CDI burn up in over 4K miles. Wouldn't the case paint need removing behind the magneto too for best contact? Edit=I'm in NO way being difficult or mean.This is a real question.Thank you.
@keeganhache6667
@keeganhache6667 3 ай бұрын
No I agree it should be removed engine still runs just fine but I think the varnish is a thicker coating the engine paint is actually anodizing so it’s not a thick coating and therefore doesn’t effect the ground
@p.k.motorsports5104
@p.k.motorsports5104 3 ай бұрын
What all did you do to get a different exhaust on that bt80 you have?
@keeganhache6667
@keeganhache6667 3 ай бұрын
Mine had the standard exhaust port
@p.k.motorsports5104
@p.k.motorsports5104 3 ай бұрын
@@keeganhache6667 figures lol just my luck
@SLAYJUCE
@SLAYJUCE 3 ай бұрын
My dirt bike used to have a sticker “don’t laugh this bike is retarded” but in reality it was high compression and timing was advanced. How would you add flywheel weight to these motors ? I’m building a dirt jumper with low gearing and need that low end grunt to get up the jump faces
@keeganhache6667
@keeganhache6667 3 ай бұрын
What motor you got?
@SLAYJUCE
@SLAYJUCE 3 ай бұрын
phantom 85v3@@keeganhache6667
@DG-fe4ht
@DG-fe4ht 3 ай бұрын
Why would the sticker say “retarded” if you advanced the timing? Makes zero sense.
@SuperTrikeBicycle.
@SuperTrikeBicycle. 2 ай бұрын
I found a keyway set. If anyone is interested I have a link.
@keeganhache6667
@keeganhache6667 2 ай бұрын
Yeah man post the link!
Adjusting Ignition Timing On A Motorized Bike
17:19
LA Hover Bikes
Рет қаралды 77 М.
How To Troubleshoot and Repair 2 Stroke Motorized Clutch 66/80cc
24:29
Hughes Motorized
Рет қаралды 201 М.
The day of the sea 🌊 🤣❤️ #demariki
00:22
Demariki
Рет қаралды 57 МЛН
Каха ограбил банк
01:00
К-Media
Рет қаралды 8 МЛН
터키아이스크림🇹🇷🍦Turkish ice cream #funny #shorts
00:26
Byungari 병아리언니
Рет қаралды 22 МЛН
Porting Video # 1 - Cleaning up Intake & Exhaust Ports
14:40
BikeBerrycom
Рет қаралды 6 М.
No fire, poor spark on bicycle engines.
14:14
Steven Williams
Рет қаралды 39 М.
OUCH! what happened and why? 2 stroke Piston Failures
16:11
Erickson Machine & Performance
Рет қаралды 16 М.
Avenger 85 Screams
30:58
Grendel's Garage
Рет қаралды 2,5 М.
Random Motorized Bike Information
26:55
LA Hover Bikes
Рет қаралды 102 М.
Part1 -How To Troubleshoot and Repair No Start 2 Stroke Motorized Bicycle
15:38
The day of the sea 🌊 🤣❤️ #demariki
00:22
Demariki
Рет қаралды 57 МЛН