Adjusting Snowmobile Track Tension | Lynx Masterclass

[@denisdenis2034]

Comment from a mechanic with 45 years of experience graduated from BRP, Yamaha, Polaris etc. A correction is necessary here to use the tool in the TRUE AND ONLY WAY!!!... With the tension tool you must put the oring indicating the distance to the correct number (example 25mm) and the small oring which will indicate the weight, you must set it to zero then you place the tensiometer in the right place on the track You press on the spring rod so that the distance oring arrives at the right place which is just under the slide). Then you remove the tool and you read the number indicated on the weight oring (the pressure you had to apply to reach the right distance. So you only have just one oring to watch when you press the tool (the distance one) and not look at the 2 orings at the same time. If you have any questions, even very specific ones, I will be happy to help you find out. You will have the most accurate information.

[@josephgagliano2841]

Second year with my boondocker 155 and track definitely stretched. Appreciate the video

[@cummins12v95]

Definitely need to do one on ds and re shredder suspension set up

[@LynxSnowmobiles]

Noted ☑️