Been cutting for almost 50 years this July.. I have never thought about adjusting the tension bar, I took it for granted that the Factory setting were correct. Very good video.. Even Old dawgs can learn something new.
@kbell78346 жыл бұрын
Danny Crawford hi
@PedrazaArt15 жыл бұрын
That’s right you old bastard 👏
@nunyadambidnis22745 жыл бұрын
whats the point of adjusting the tension
@577buttfan4 жыл бұрын
@@nunyadambidnis2274 So the two blades stay together and dont vibrate apart while cutting causing a jam.
@clsmith6144 жыл бұрын
ok great vid, learned a couple of new techniques different & much more easier than I learned from school. TFS
@slink19577 жыл бұрын
I was dead in the water with my trimmer. I took it apart to clean and it was never the same. I followed your video with the blade alignment and tensioner and now it works better than when I bought it! I appreciate your professionalism. Thank you.
@spicypotato21747 жыл бұрын
David Slinkard hi
@moneybags88696 жыл бұрын
David Slinkard whats the name of the alignment tool? Will like to get one
@CJ-er2qh6 жыл бұрын
Where u get the blade setter
@blackmoney48195 жыл бұрын
Fftu you
@kishanabear5 жыл бұрын
OMG... Ditto!!!
@937jb8 жыл бұрын
Setting that tension and removing that back screw has my liners hitting way better thanks.
@kennydavis25252 жыл бұрын
I been cutting 25 years ain't never knew this omg fire video bro
@mollyg98038 жыл бұрын
This is the best quality, most detailed T-outliner video I have found. 5 stars, thank you!
@desyne99347 жыл бұрын
Not Sure
@deejay51026 жыл бұрын
did it work???...
@ReggieWinston6 жыл бұрын
Molly G I agree. Check these trimmers out too kzbin.info/www/bejne/opy4l6uOZpyIbKc
@Pestilence8683 жыл бұрын
That "snap" is the key to it bro thanks...............trimmer sharper than brand new now
@beewalk347 жыл бұрын
Thanks brotha!!! Been cutting my hair for years. I never knew about both adjustments. Despite that, as a high school teacher my students always tell me how fresh my cuts look. But I came across your video and followed both steps to the T. And it's definitely a game changer. Now my andis outliners are sharp as hell with a lot more power. My shape up looks better than my last trip to the barber. Can't thank you enough!
@sd33zy3138 жыл бұрын
thanks bro thought I fucked my shit up
@peoplesyemi62877 жыл бұрын
dont have one. i have 2 fathers so hmmmmmmm
@sd33zy3137 жыл бұрын
no just me now go to bed
@sixroldan67425 жыл бұрын
Concise, simple and well explained. Great video. Thank you!!!
@MrLinights7 жыл бұрын
Thank you Sir, I followed your tip and now my blood pressure is normal.
@jaishad4 жыл бұрын
Lmaooooooo!!!
@davebcoolin4 жыл бұрын
😂😂😂😂
@rolandomartinez33035 жыл бұрын
Adrin,your a cool dude homie.alot if barbers wont take the time to show and help other barbers. RESPETO HOMIE
@dewash3316 жыл бұрын
This is the absolutely best demonstration for adjusting the tension on the Andis Outliner trimmers
@seancoles19727 жыл бұрын
Thanx a whole lot Fam it's 3 am in Houston TX. and I followed your instructions and got my joints right. I even adjusted my wahl t linners. I appreciate the free game RNS.
@jaymendoza69207 жыл бұрын
great video ! me personally would not recommend the mirror way of adjusting becuase most ppl wont check or know if the blades are to flush to each other and will cut ppl necks and around the ears the sensitive areas especially those new to cutting hair
@tracyeyre59915 жыл бұрын
Wow. Thanks so much. I've been pissed about these trimmers since i bought them 1 1/2 years ago. They were hardly cutting at all. I even bought a new blade at one point, still no luck. I followed your info and voila... they work great!
@Aaron-vv8hr8 жыл бұрын
Just did this to my t outliners and WOW! what a huge difference it makes, thank you bro!
@shahrukh8176 жыл бұрын
My man, I cannot thank you enough...I tried 3 different blades in one day (all zero gapped), and thought that my T-Outliners were shot...after watching your video, in 2 minutes I was back to cutting my hair...thanks so much! Appreciate your informative and easy video...you seriously helped a ton!
@KeleentProductions5 жыл бұрын
How can you tell if your tension is off without taking it apart?
@NoNonsenseJohnson8 жыл бұрын
Hands down a perfect tutorial. 10/10
@jeffthebarber82597 жыл бұрын
Why doesn't andis sell two different categories of trimmers... Home use and professional barber use that come pre adjusted and gapped??? I've been a barber for 20 years and still don't understand why the fuck I gotta adjust every pair of trimmers/clippers I buy???? It makes no goddamned sense to me!!!
@enriquehernandez10276 жыл бұрын
jeffrey patterson liability reasons if they are set and cut someone right out the box they can be held liable (sued) so they are not completely zero gapped
@bonafide1545 жыл бұрын
@@enriquehernandez1027 thats what a disclaimer is for. it waives all liability from the manufacturer. if they clearly have it in writing on the box theyre good. thats why promate never has no issues with their sharp blades and tools.
@Boricuaamada6 жыл бұрын
I always go to your videos when I'm having issues with my clippers. Thank you so much! ❤️
@thegotdamnjuggernaut3134 ай бұрын
They work better now than they ever had. Appreciate that, homie 👊🏽
@Cars4life7 жыл бұрын
Great video man! I travel for my job so I invested in these to keep me looking good while on the road. Your video got me set up right. The lines are Day n Night from before I did the steps in this video! Other thing that was annoying that you did not mention is that the slide piece can fall out of place. I kept fumbling it over and over. Thanks again!
@tonyroda62925 ай бұрын
I had some Outliner IIs that I've had for over 25 years...they quit working so I took them apart and cleaned them up. Still wouldn't cut. I literally threw them in the trash and was ready to waste $90 on a new pair. I watched this video and you got me up and running again like they're brand new! Thanks man.
@dtchevy73175 жыл бұрын
Finally bro after 20 yrs, your vid made me scream for effin joy, thanx alot for the vid!!!!
@DTH2ALLU8 жыл бұрын
great video man, I have the same t liners for the last 12 years never adjust then only thing I ever did was change the blade. learned something new today 👍👍
@I8UUP24 жыл бұрын
I wanna thank you champ! You save me from throwing away my favorite Andis clippers. I took my Andis apart to clean them and could put it back together. When to Sally's Beauty Store and was told they don't repair or sharpen blades any longer , what a blower 🤦 So I came home and started searching for instructional videos and came across yours... Thanks for your instructions on maintaining your clippers.
@mistergunsmoke31186 жыл бұрын
Dam I was wondering why my new ones wasnt doing shit out the box duhh. Thanks fam
@ephrenewed11034 жыл бұрын
SAME!!!
@badboy88137 жыл бұрын
Thanks for the tip. My main issue was with my tension and the number one thing that worked for me was removing the second screw by the power switch. Amazing!
@timothyknights3035 жыл бұрын
Thank you very much my brother I have one just like those and because of your helpful video my T edger is set the right way ☺
@ghentforce20208 жыл бұрын
I really enjoyed the video, it was very helpful and informative. I'm new to all of this and was wondering if you could explain what does adjusting the blade and tension do for the haircut. Thanks
@AdrinTheBarber8 жыл бұрын
It really just helps with getting a sharper, smoother and cleaner cut and helps your clippers cut more consistently
@SCRATCHONEMORE4 ай бұрын
This is the best video out of all of them. Concise clear and clearly shows how to adjust blade and tension spring with correct position.
@symboltherapper8 жыл бұрын
thanks man... really appreciate this video! I threw away my last pair of t outliners because I thought they were broken. all they probably needed was an adjustment lol. thanks again!!! peace
@br3wskee8 жыл бұрын
I did something like that with my first pair back in the day too. Lol
@darrenwilliams57025 жыл бұрын
My gtx are hard to put the shit together throwing it away and buying new ones
@yeayea24998 жыл бұрын
bro, I truly appreciate all the knowledge u drop!
@tacticalbarberpewlife21277 жыл бұрын
where can I get the adjuster you have,the link takes me to another type of adjuster
@preciousluv39228 жыл бұрын
Thx Guy..I am a woman and just bought my Outliners today...I like da crisp clean cut and purchase to stop buying so many razors but I will Btryin to do myself..wish me luck😯😃
@metamas3am5 жыл бұрын
Thank you so much for teaching me how to do this. I love you ♡♡♡ and you information about how to become a better barber.
@mikecarter5238 жыл бұрын
Been trying to learn how to shape my self up and my boys for a while now $80.00 a month for 12 months is almost a stack a year on hair cuts is a little crazy. I had bought a set of Andis Pivot Pro 6 years ago. Is it the same process in setting the blade on the trimmers as the t liners?
@experienceprecision54065 жыл бұрын
Support your local barber if you can. Learning to cut yourself is great if you can't get a appointment but your barber dedicated his life and feeds his family and the shop can be apart of the glue of the community.🍻
@magic72078 жыл бұрын
Good vid brotha, knowledge is power.
@AdrinTheBarber8 жыл бұрын
+magic7207 Thanks for the support!
@1338-c9s5 жыл бұрын
The first thing imma yaba daba doo
@parrishjordan47295 жыл бұрын
133 80 😭😭
@mangumsir2955 жыл бұрын
Yo bro , I’ve been trying to learn this technique for years. No one wants to show me . Even took my clippers to the repair shop to get them sharpened and they still weren’t hitting with that razor crisp line . Yo I looked at your video twice and tried your technique and my Andis T outliners work like “ butter “ . Yo thanks 100 fam
@chosenstatus7 жыл бұрын
Amazing tutorial. I was having trouble with my outliner not cutting properly and this definitely did the job. Cheers!
@click4118 жыл бұрын
I wanted to ask you. I like to fade with the Andies Masters. But I see barbers going over to the Oster Fast feeds. What do you think
@angelamazon16 жыл бұрын
Thank you bro, i been doing this for 30 years and i knew i was doing something wrong.
@zephyteh26287 жыл бұрын
bro please make a video of how you did your moustache please
@chopvisuals8 жыл бұрын
thanks fam on the vid.. great info
@ThaMaskRapper4 жыл бұрын
I like the Blade Settera to got but why does that back piece come off for the time? And how do you put it back without having a blade Setter? Because it seems like the blade Setter. The only thing that will fit it back into place.
@DerrickCuffie4 жыл бұрын
Corona sent me here LoL 😂. Good clip man...pray for me lol
@AngelicaSifuentes15 жыл бұрын
Fck where's this video been...ty! Needed this knowledge....ty for sharing! ❤
@Doc_9178 жыл бұрын
Never knew u could adjust the tension as well, this explains a lot.. Good lookin out
@lawsuitjerry5 жыл бұрын
Thank you my brother for being a 32 gang🤘🤘🤘🤘
@Dre_P_8 жыл бұрын
Thanks for going into great detail about this process. I'm going to try this out. Great video btw..
@AdrinTheBarber8 жыл бұрын
+DreP 80777 Great and good luck with it! Glad you liked the video and thanks!
@Dre_P_8 жыл бұрын
No problem bro, keep up the good work..
@Dre_P_8 жыл бұрын
+ADTheBarber I have a question for you bro. Once I took off the top of my outliners, I noticed that the spring for the tensioner was crooked and cocked to the left. This is my first time attempting to adjust these clippers. I never dropped them or banged them beforehand. Will this be an issue for my adjustment?
@danthadon875 жыл бұрын
I admire your professionalism, you saved me money from buying a zero gapper, thanks!
@FranciscoMorales-rv1ct8 жыл бұрын
appreciate you taking ur time out to show us how it's done ✊, great look
@fabianwiley35807 жыл бұрын
hey bro this was very helpful, question what if your clippers make noise how can you stop it from making noise. thanks in advance
@kendrickglover14718 жыл бұрын
thanks man very helpful
@bluntoons19344 жыл бұрын
Man you're a life saver fam
@AWESOMEAMME7 жыл бұрын
Thanks... Just followed you step by step and just did a all even... Edgers cut like BUTTER
@deejay51026 жыл бұрын
what method did you use? the setter or the mirror???
@AWESOMEAMME6 жыл бұрын
Mirror and my eyes... Lol... Edgers are life...
@michaelspanks81665 жыл бұрын
Best video I've seen for adjusting clippers. I've thrown away several pair of trimmer because I couldn't adjust them properly. I followed your instructions/video, and everything came out perfect the first time!
@MillerHighLifez4207 жыл бұрын
Great info! Shitty focus on the cam tho !
@VERITEVERITA Жыл бұрын
No matter what came out over the past 35+ years I kept my t outliner. But as I got new blades I decided I had to find the right video! Sure glad I bumped into you! So much has improved for fading and cutting! Over the years. Glad I found you! I’ll subscribe and look for recommendations. Thank You 😊
@jaykob24828 жыл бұрын
Very informative vid, AD! QUESTION: What is the best blade setter on the market, in your opinion? I've seen a few different ones.
@nsavernon6 жыл бұрын
I use these www.amazon.com/dp/B00ATH2YL2/?coliid=IZE1IQ12JAOQ8&colid=8MA0494UL2V&psc=0&ref_=lv_ov_lig_dp_it
@iGotNEXT_Mack7 жыл бұрын
i know your clippers get hot that tension screw messed up
@edwardrobinson66048 жыл бұрын
taking that bottom screw out of the casing makes the clipper more powerful was a new one on me thanks for that I appreciate it. 💯
@reallivejohnpreston6 жыл бұрын
Edward Robinson why
@OGPapiFresc5 жыл бұрын
This will also make sure the blade doesn't move as it's supposed to. Instead of side to side , it'll move in circles and back and forth therefore eventually causing damage to the tension bar.
@Octane9166 жыл бұрын
Bro I absolutely want to thank you for making this video! For years I’ve been trying to get my outliner II and t outliners barber quality sharp and in my unsuccessful attempts my clippers have not been solving my razor bump issue. Your tutorial has my clippers hitting and shaving my face effortlessly. I was on the verge of throwing both of my clippers away because I thought they were too old but nope once I got that above half moon on my tension spring I was golden! Only thing is my tension spring never clicked in to place but I tightened the screw enough for the half moon and I was good also the one screw in my case trick didn’t work I needed both screws or my outliners rattled too much! Overall absolute 10/10 video thanks again!!!!
@SilkCityOG8 жыл бұрын
Dope bruh. I should just mail u mine and let u hookem up
@keithjohnson14998 жыл бұрын
What can I do to my outliners to fix them. Sometimes they just stop cutting. The motor is still working and the blades appear to be moving but they aren't cutting. I oil them and wait 10 minutes and they seem to work again but not sure why they do this and they do it everytime I use them. Any help would be appreciated.
@tonysiler34678 жыл бұрын
This was a great video. Clear with good explanations. Third one I've watched today, but you did a fantastic job Bro. I followed every point step by step. Everything worked like a charm.
@crwuser4 жыл бұрын
Exactly what I needed no surprises. Did just what you said to do and it’s cutting like a dream. Thanks! 10/10!
@cloudsdiamondsharpening39738 жыл бұрын
Man your tension spring is jacked. Send to me and ill fix it right. I sharpen professionally and fix things better. But good video
@jadrien026 жыл бұрын
Cloud's Diamond Sharpening where are you located?
@sew04ss6 жыл бұрын
?
@kingofkingz81255 жыл бұрын
Stop being a hater, lol
@kirakirstyn60085 жыл бұрын
Where's your video then?
@captainfresh19767 жыл бұрын
ADTheBarber i whent to baber school back in the day 1998 and my teacher showed us the same technique nice vid bro
@kevinulloa12338 жыл бұрын
Your a life saver man. I was fixing to buy new pair. My friend gave me these she said they wouldn't cut and she bought a new pair. Lol I fixed them thanks to your tutorial.
@eldalex078 жыл бұрын
thanks bro very useful!!
@tapmaan61508 жыл бұрын
Thanks man! I thought that my trimmers were broken. This saved me the purchase of a new pair.
@kingofkingz81255 жыл бұрын
What about ghosting ur frame ? Will that make em HIT better ?
@tevinwhitley3724 жыл бұрын
I appreciate you sir! You gave precise instructions and got me back in the game! I've been using my T-liners for months unadjusted!
@Premierehiphop5 жыл бұрын
THANK YOU! ALMOST SPAZZED OUT cuz i started cuttin my hair and my old ass clippers started acting up again and I was trying to adjust them, but I couldn't get it! Found your video and it save my life LOL... good looks my bro!!!
@jeffthebarber82597 жыл бұрын
I mean real talk... For the price I pay for my tools I feel they should be barber shop ready outta the box yo!!! It's bull shit if you ask me... I've been fuckin with my tools for 20+ years and don't understand why for the price I have to mess with this shit!!!! Fed up barber right here!!!!!
@xTOVAR2107 жыл бұрын
jeffrey patterson stop bitching boy
@Tazrahzeljr7 жыл бұрын
jeffrey patterson any professional tool has to have the ability to be adjusted. otherwise theres no way to truly know if your tool is up to spec.
@jason_kenner2 жыл бұрын
So this is what Larry wheels did before bodybuilding 🤔
@AlexTechie8 жыл бұрын
I haven't tried it yet, but I must say, this appears to be one of the best videos (if not the best) when it comes to adjusting the tensioner. Clear instructions, clear picture with no blur. Thanks.
@byronrockett79588 жыл бұрын
These new barbers take guys lining back.Thats not gd
@PeterJinKang7 жыл бұрын
What does adjusting the tension do?
@nsavernon6 жыл бұрын
I'm curious myself.
@amadeus54036 жыл бұрын
Puts pressure on the moving blade to create friction. Too little tension pressure and the blades will pull the hair instead cutting and too much tension will cause the trimmer to fuse out and possibly mess up the motor or the positive/negative cables that connect to the motor.
@CJ-er2qh6 жыл бұрын
Thanks
@elfolie8 жыл бұрын
man thank you for help
@LidiaUdrija8 жыл бұрын
Hi thanks for your video. I'm in cosmo school and they gave us Wahl.... Any idea how to adjust them or what blade setter to get for that brand?
@AdrinTheBarber8 жыл бұрын
+Lidia Udrija No problem, Yes I am familiar with adjusting wahls blades as well, not sure if they make blade setters for them but I can look into it and let you know!
@LidiaUdrija8 жыл бұрын
+ADTheBarber that would be so helpful... Sorry for all the posts seems my app didn't recognize I sent one message... Smh
@AdrinTheBarber8 жыл бұрын
Lidia Udrija I got you lol there were like 3 people that had duplicate messages on that video!
@jasontomas57678 жыл бұрын
Lidia go to "www.therichbarber.com" they sell wahl on the money adjuster....and they sell adjusted blades already
@LidiaUdrija8 жыл бұрын
+Jason Tomas awesome thank you... You're a life saver
@selinazapata19627 жыл бұрын
whenever I take the blade off do I need to reset or adjust the tension again? tks
@everettwhite98747 жыл бұрын
Selina Zapata No.
@UniversalStylez6 жыл бұрын
After watch this tutorial my trimmers are rejuvenated! Thank you!!
@billnott58117 жыл бұрын
Can anyone tell me how long the blades last , when used by only one person and properly oiled regularly , before they need to be replaced ? I just bought my first T-outliner and boy o boy am I impressed. Wondering if I should buy one set , or several sets of extra blades ? By the quality look of them I'm guessing they last quite a while , I was hoping someone with experience might be able to tell me if a set of blades might last 1 year , or 5 years ect.... thanks so very much from Alaska...
@carygrubbs50337 жыл бұрын
🌟🌟🌟🌟🌟thanks for the info I did my outliners they line up tight bruh
@TheJrddxw6 жыл бұрын
WOW! My T-outliners are hitting so sharp and they are as smooth as butter this is perfect for this coming weekend as I’m going to be doing a ton of back to school cuts. Thank you so much!
@bonafide1545 жыл бұрын
where did you get those pliers? or better yet whats the name of those pliers you used to set the tension?
@sglant6 жыл бұрын
Excellent! I NEVER knew about that!!!
@2009timothykelly5 жыл бұрын
I’ve been shaving my head for the last few years with a pair of Andis, this really helped me to figure out how to tune them in right. Thanks very much
@MarcHawthorne15 жыл бұрын
Excellent video. So what does adjust tension do in general?
@str8frommyeyes5974 жыл бұрын
This video is da truth fuk all da rest 💯
@awhite52185 жыл бұрын
Perfect, You explain everything Perfectly The word for the Day is Excellent... Now Im up and Running...Thank You..
@KevinMaTV7 жыл бұрын
Would setting the blade and tension affect the blade from moving? Because my blade doesnt even move side to side anymore.
@aaray8515 жыл бұрын
Are you saying that u adjusted the blades & tension & now that you've set them the blades NO LONGER move from side to side?
@keifx21268 жыл бұрын
Thanks for the vid it was very helpful.
@baggamsandeep27695 жыл бұрын
Please tell me the nova nht1076 trimmer spring and blade adjustmemt