So refreshing to hear from non-worry-warts!! Great series by the way.
@ammosmith14 жыл бұрын
@MacTeutates I'm not worried. The lead hazard is mostly bogus. Lead has to be atomized or dissolved in a solvent to get you sick. I've had a lead test last year and I handle lead a lot and I was fine. Just don't sweeten your wine with lead powder like Nero did...not good for you. I also run down the hall with scissors and I'm ok so far.
@borealpatriot15024 жыл бұрын
LOL! That scissor thing is what's gonna get ya ... in the end. :-)
@2tommyrad11 жыл бұрын
I also like your elevated, eye-level, scale.
@supermaucat14 жыл бұрын
Amazing series! Love it! That iPhone trick is like magic. Thanks for these vids! PS: Vids can now be 15 min long on YT ;).
@bluerazors13 жыл бұрын
Just a thought, if you took the plastic off the botom handle of your cutters, you could sandwich it between 2 pieces of angle iron and weld it solid. Then bolt it to the bench. Should double the cut off rate.
@beestoe9932 жыл бұрын
I like the core snipper idea. That's pretty slick.
@ammosmith2 жыл бұрын
It works! But it's not precise. So a lot of lead gets wasted but you can melt down the excess lead and pour cores with it. Thanks for the nice comment.
@roonimac2 жыл бұрын
@@ammosmith how did you make it I might do this
@PESCATORE-16 ай бұрын
Very nice machine if one has a need to turn out large quantities of slugs.
@ammosmith11 жыл бұрын
I have made core molds. I want to extrude wire but it will take soem equipment to do it.
@noobwhy53495 жыл бұрын
Do you drink water
@tomharrell19545 жыл бұрын
Here is a tip for you!!! I am not a bullet maker. I reload and shoot benchrest. I weight a lot of stuff. The balance you have works great but it’s slow. Electronic scales are now cheep and accurate. Get one!!!
@DeadeyeAgent3 жыл бұрын
What press is this? Brand?
@ammosmith14 жыл бұрын
@supermaucat Really? That's good shit there!
@jimmytigulo50162 жыл бұрын
Have a good day chief. Me i know where can i buy that led wire please. Thankz
@mikerussell62122 жыл бұрын
Corbin Industries has lead wire
@roonimac2 жыл бұрын
How did you make the tool with the blue handle wire strippers?
@ammosmith2 жыл бұрын
Ill have to make a video but it took some thought and some parts at the hardware store. I used a titanium coated bit to widen the hole on the tool then used a long threaded bolt and some washers.
@MadBadVoodo14 жыл бұрын
Thumbs Up!!
@ThePsaitta11 жыл бұрын
Could you create a core die and mold your own lead? it would be cheaper per core then using wire.
@tzzler447 жыл бұрын
NOE makes core molds now
@GunFunZS7 жыл бұрын
I've seen old ones on ebay too that are at least 50 years old. They are a common item.