Advanced Color Grading on LumaFusion IOS iPad & iPhone + PRO TIPS

[@shawn3d]

This tutorial starts off with basics and then progressively gets more advanced to get a refined cinematic look. Watch the whole video to maximize your look. Download The Powerful LUTs Grading & image enhancement: spectrumgrades.com Compatible on most editing applications on both Mac & Windows desktop/mobile Download LumaFusion: luma-touch.com

[@longbeachnutt]

ProCinematicFX can the cine collection m2 dji mavic 2 pro luts & tools set used with any camera footage other than the the dji mavric itself?

[@shawn3d]

LB Nutt good question, the CineCollection M2 is very specific to the Mavic 2 pro. The pack that is suitable for you’re cross camera use is the CineVision pack. Let me know if you get them and would love to see what films you create

[@tahakaran6101]

Is there any comparison to understand how it would have done without lut videos. I have an iphone 13 and i dont have an option as lut. But i am wondering how good results i can make with this.

[@raegan06]

This was extremely helpful! To someone who’s not exactly a beginner but still trying to learn more about color grading and that area of filmmaking, I especially like the Gaussian blur trick since I use my iPhone to film, and iPhones are notorious for their sharp image, which doesn’t look very film-y. Thanks a lot for your help!

[@shawn3d]

Extremely glad it helps. Will be good to see what you create with these tips

[@Robbe1984]

Ffs, brilliant video. The idea with the transition for the mountain shot was the simplest solution I've seen so far. No masking needed

[@aryehzeev7236]

On the mountain peak in the clouds: when I’ve had a shift like that I’ve successfully used lumafusion’s key frames to make gradual changes to the exposure and other settings. That way the change is even more subtle without splitting the clip.

[@gregsimmons1709]

Thank you! That was fantastic. As a sound engineer who has only recently started venturing into video and is using Lumafusion, I found this to be both informative and inspiring.

[@shawn3d]

Thank you for the wonderful feedback Greg. Glad this is helping you create wonderful films. Please do showcase your videos using these methods. It will be great to see 😎👍

[@jeorgepaolo]

man, the blur layer trick is pure genius! 👌🏻🔥

[@shawn3d]

Glad you love it. Had to figure out a way to soften and give that subtle filmic look. Now you can also do this in other editing programs. Will love to see you using this technique in your videos. Have you tried it yet?

[@jeorgepaolo]

good thinking! i actually like that it softens the footage a bit plus adds a little denoising effect on the clips. i haven't tried it yet but for sure gonna try that soon. i'm a lumafusion editor as well. most of my videos in my channel are now made from it. 😊

[@shawn3d]

You sill love the technique. Just used it again yesterday with iPhone footage with a grade. Very happy with the result :)

[@Santiago-kg4rd]

Superb tutorial! Your tip on de-noising is brilliant. Could I send you a short clip to get your thought on the level of noise reduction? If so, how do I send it to you?

[@Emiliosw]

Amazing. That blurred overlay clip is very useful. Thank You!

[@shawn3d]

It’s a top end tip for sure. Takes that sharp feel and softens it to look like film typically would. Do show what you have come up with when using these tips

[@derealfreakydaddy]

ProCinematicFX First time I’m coming across this tip..Thanks a million

[@Kinsman19]

Thank you very, very much for this tutorial. It's concise, to the point, and extremely helpful. I'm pretty new to drone videography and have recently started to upload to stock sites. Because of this video, I know how to properly color grade, adjust levels, and denoise using nothing other than LumaFusion--and the sales are slowly but surely starting to come in. That transition tip has been particularly helpful in shots with tricky sun angles. Really, I can't thank you enough.

[@shawn3d]

That’s such wonderful feedback and truly pleased it has helped you substantially. Please send videos of you using our techniques and tips to look at

[@duranopaulo]

Thank you coming from the Philippines.

[@shawn3d]

You’re absolutely welcome 👌😎

[@maryetdave]

I edit videos but don’t colour correct any of them yet, will be adding this to my next videos, thanks for the tips

[@shawn3d]

S/V Lusca anytime and really please it helps. Are there any other type of tutorials you would like to see? :)

[@YukiTomori-p2s]

Nice. I dint know others could really really help that much to improve the film. Thank you so much

[@THEREALTWISTEDINSANE]

Works on anything that you can open lumafusion

[@bengolden7457]

It’s great to see creative tips like these! Only you have done that double layer softness effect and it’s so good 👌

[@shawn3d]

Hey Ben, thanks for the great feedback. There is also the technique presented here with the exposure change issue which hasn’t been shown for LumaFusion before. Great thing is these methods can also be applied on desktop editors. Have you given them a try? (Will be interested to see your results)

[@sebastianvoss1917]

Man, nice video helps so much

[@shawn3d]

It’s such a pleasure. Glad you love it 😎

[@ghosttjr2]

Why do you place the basic color adjustment above the LUT, does it have to be in that order? Thanks for uploading this!

[@johnd9357]

Where do you find the cinescope bars in lumafusion. I can’t find it, and there’s no mention of it in their reference guide.

[@emadal-ajmi1013]

Excellent video. Learned a lot. Thank you

[@shawn3d]

Emad Al-Ajmi thank you kindly. Appreciate the feedback. Which part of the tutorial is your favorite?

[@emadal-ajmi1013]

ProCinematicFX The part where you graded the scene with challenging exposure (the mountain / clouds scene). ّI liked your approach of splitting, grading each part and the way you have done the transition “seamlessly”. Also the blurring effect to simulate NR of the scene is superb.

[@shawn3d]

Glad it helps a lot and yes it’s all about thinking out the box with limited functionality. On a desktop editor one has much more options to work with but LumaFusion is amazing for an iOS editing app :)

[@sylvest1001]

Very slick....you make it look so easy.

[@shawn3d]

Thank you kindly. Have you tried any of the techniques and tips in this video?

[@stanprinsloo6225]

Spot a South African just by their accent. Great video mate! I use Lumafusion for all my editing and grading

[@shawn3d]

Howzit ;) Yeah LumaFusion is great. Glad you’re using it 😎👍

[@maradonamartin9870]

Amazing luts....u have a special discounts code to purchase pls?

[@shawn3d]

They are truly great. This discount code works “SpectrumGrades10” 😎

[@adinwalls]

South African 🤓 lovely work man. I do most of my work on LumaFusion. I’m just struggling with the feature of working with files from my HDD.

[@shawn3d]

Hey Adin, that’s awesome to get a message from you. What issue are you actually having?

[@SootheSound]

Great video, lovely pacing and I am amazed the software does so much! I just need a bigger screen now. Thanks for making the video and give me more to learn 👍.

[@joshhall7033]

Great video! Just subscribed!

[@shawn3d]

Great to have you around Josh :)

[@JaradLee]

Taught me a few tricks in 13 minutes, thanks man. Subscribed!

[@shawn3d]

Awesomeness. Thanks for joining and much appreciated :)

[@ManantialVE]

Thanks for this video. Very useful! I started using LumaFusion 2 years ago. With features like LUTs support and the recent addition of Blend modes, I haven’t looked back at my NLE.

[@shawn3d]

That's wonderful to know. Super pleased this has helped with your workflow in LumaFusion. Which part of the tutorial do you find most useful?

[@ManantialVE]

ProCinematicFX I’m quite proficient with LumaFusion so I know the process you showed. I enjoyed the flow of your presentation and the clarity with which you explained each step. Video editing tutorials tend to be a bit technical and somewhat too detailed. Overall you made a great job keeping your audience engaged and you are are providing an important service to the ever growing community of LumaFusion users.

[@shawn3d]

That’s amazing feedback. Thank you for that. Yes, people should be able to create content as easily as possible. So the tutorial was to be to achieve an advanced look with the simplest steps to achieve this. You have done some great LumaFusion videos yourself. Glowing eyes one looks great 👍

[@ManantialVE]

ProCinematicFX Thank you for looking into my channel! I like and get your approach of asking for feedback to identify what works and what doesn’t and make your content better.

[@PepoBoomer]

Very nice tutorial bro 💪🏻

[@shawn3d]

Thank you so much. Really appreciate your wonderful feedback buddy :)

[@BrocchiRodrigo]

This method is very cool!

[@eathee]

I'm getting the iPhone 12 just because of this app🔥$30 for life🙂amazing

[@foodandtravel4307]

Hy, just one question plz..how do you make this tutor video?? Can we make this kind of tutor video on ipad by using lumafusion or we need any other app else?? Thank you

[@TedKunchok]

Can I do that same thing on iPad mini 5th gen? I have Sony zv1 camera...can I do 4K too?

[@shawn3d]

Ted Kunchok this I cant say for sure as I haven’t tested it. It should do but I’m guessing you may have to set your playback settings to a low resolution for playback purposes. Will be interesting to know how your tests turn out. Please keep me posted :)

[@imzaazmi]

Great input tqvn ❤👍

[@johnmackenzie4033]

Great video shows a novice like me what is possible and to still be able to use and improve my footage. Thankyou

[@shawn3d]

Anytime John, happy you can improve your films with these tips 😎

[@mike_abramyan]

g damn this made me want a drone. Great video!

[@shawn3d]

Yes, get one. They are amazing fun to have. Maybe start off with the Mavic mini if you are limited with budget but if you can, then the Mavic 2 pro is the one of choice 😎👍

[@shawn3d]

mikeyyy0 the Mavic Air 2 just gotta released. You might be interested in that. Its the best middle ground drone on the market for price/performance value...

[@THEREALTWISTEDINSANE]

Will it work on a galaxy tab?

[@GuyA]

Hello, thanks for the info. Can you please explain where did you get the luts from ?. Thank you!

[@Levatar]

Greetings, how can I activate that blue pointer when touching with my Apple Pencil? ☺️👍🏼

[@shawn3d]

Yes you can but its not an east task. It requires a reverse key and layering. It wont work in a lot of scenarios

[@HMaxTube11]

Nice demo. Thanks for sharing your expertise⭐️

[@CapucineF]

Such a great & helpful video! Thank you for sharing your knowledge!

[@ngkatrung]

I love the colors in the video so much. Can anyone share it with me.

[@Isaqiu]

Do you use paperlike screen protector? If so, does the paperlike annoy your editing workflow? Especially when sliding or trimming the timeline with Apple pencil😀

[@shawn3d]

Actually the screen protector works really well and honestly doesn’t affect the workflow at all. I would highly recommend getting one. It’s certainly worth it when constantly using the pencil and making micro scratches on the screen

[@Isaqiu]

OK thanks😊

[@piiits_life]

you really have style and great images. sometimes i was thinking ‚„meh“ and than you showed the end result and i was mindblown :)

[@shawn3d]

Truly appreciate your comment and love how you explained your thoughts while watching. It’s actually quite humorous and pleased you got some value from this video. Yes the results are quite a lot better once processed and hope you can apply these techniques for your footage :)

[@piiits_life]

@@shawn3d because of this video I downloaded Luma fusion yesterday ;) and already started playing a bit - I was dreaming about how to create videos 🤣 so you hooked me up - maybe one day I’ll show you a KZbin video of mine and you would be one of the reasons why I started ;) have a great day :)

[@shawn3d]

@@piiits_life yes!!! Do it… filming is such a great expression of creativity. What camera are you using?

[@piiits_life]

@@shawn3d I just started in December - before I was only taking pictures with my iPhone - playing with raw photography and playing with Lightroom and affinity photo - I got good in that field - now I am planning to get bit more into filming because it’s the beauty of capturing in motion 😍- therefore I will start with a go pro (I know not the best - but good for some action filming)+iPhone and here i wanna start playing with luma fusion - to see if I can master it - and than if I don’t loose interest or hope or anything i would love to invest in professional gear - like a Sony alpha 7III or also Fuji x100v and DJI Mavic Mini

[@kennyng8076]

Can u do a tutorial on creating cinematic bars? Fixed, opening and closing ones? Not sure what is the correct term for it.

[@ParallaxOfficialTV]

amazing tutorial :)

[@shawn3d]

Absolute pleasure and glad you like it. Will be great to see what you create with these techniques applied

[@MikeMarcosson]

Thanks for the video! I’m new to LumaFusion and this helped me so much! I subscribed 😁

[@michaelbusto9330]

Awesome video!

[@shawn3d]

Thank you very much and appreciate the wonderful feedback. If there any other tutorials you would like to see, then do mention it 😎

[@andrewchristian3017]

So wait. If I were to get the luts for air 2s. It will be compatible with luma fusion?

[@shawn3d]

Yes absolutely. They will work in LumaFusion. So you’re good to get them

[@nikfizri]

I have one question, serious one. Does all the footage that you used in this video were already denoised before you started color grade on the ipad?

[@shawn3d]

Hi Nik, no denoising was done. All right out of camera. Best way to minimize noise is to film at the lowest iso possible while still maintaining good balanced exposure. It’s ok to go up in iso a little bit as this can sometimes actually reduce noise if the image is underexposed

[@guerinomaione6410]

Hi, i have found a Mavic mini lut but I shoot my video with my osmo pocket too. Do you have also a solution for that one?

[@shawn3d]

Hi Guerino, you can do the exact same process with the SpectrumGrades CineVision LUTs for your osmo. Here is the link... spectrumgrades.com/products/cinevision Let me know how it works out for you

[@tdragon87]

This is really cool. Are you going to make LUTs for the Mini 3 pro?

[@nikolaieh0624]

The website he got the outs from does have LUT’s for the mavic mini 3 pro I believe

[@goingfurther8092]

I’m really happy I found your channel this is great content

[@shawn3d]

Thank you for joining. Much appreciated :)

[@sacardevos]

Hi! Very nice, thanks for the tips. At 10:52, how do you do the before and after effect?

[@pwstudio7156]

Great tips! Thanks 👍

[@shawn3d]

Anytime. Glad you love them. Let me know how it goes when applied to your films

[@therealladyinsane]

Will these luts work with a galaxy s8 tablet? Can I download and use in lumafusion using the s8 tablet?

[@brooklyndronie9729]

Hi. Thanks for the video. I am about to purchase an Ipad after watching your video. Apple pencil is a must but how abut the keyboard. You used it to zoom in and out with KB. Can I just do without the KB or am I gonna miss anything also is there anyway to match all the color grading of every clip instead of doing them one by one. Thanks

[@shawn3d]

Yes there is a copy and paste effects you can apply on each clip. Works very well and don’t need to repeat grades. You may need to fine tune each shot though. As for the keyboard, it’s not essential and neither is the pencil. It does help to have it though :)

[@shawn3d]

Oh you can pinch the timeline in and out to zoom without a keyboard

[@rjavier15]

Great. Do you have anymore LUMAFUSION tutorials?

[@officialdanielsheppard]

I think I downloaded the wrong one - do you have a direct link for the gamma LUTS you were using?

[@shawn3d]

Hey Mancake, it depends on what camera you are using. Which pack did you get and what are you filming on?

[@officialdanielsheppard]

@@shawn3d Filing in 4K 23.98 on the EOS M50 and iPhone 11 Pro Max in 4K 23.98 and editing in LumaFusion (the full one). The one that I ended up on was CineVision Universal LUTs

[@shawn3d]

@@officialdanielsheppard if I were you, I would stick with the CineVision for your setup. The Gamma is great but the CineVision has both log and standard color options. In my opinion it’s the best one and you chose correctly

[@officialdanielsheppard]

@@shawn3d much appreciated! I’ve been seriously lacking color grading and your channel has been great. Others have left me more stressed. Appreciate the content and the replies back bud.

[@shawn3d]

@@officialdanielsheppard thank you too. Thats such a nice feedback from you. Much appreciated :)

[@rdomingo21]

Hiii thanks for sharing! I have the first generation mavic pro but my dlog footage is grainy. My iso is 100, 60 shutterspeed. I think i dont have the right custom picture style settings. Can you please share yours? Thanks!

[@shawn3d]

The Mavic pro first feb and second gen have a lot of noise. You need to denoise your footage in edit. There some noise profiles here but keep in mind you will also need neat video. Let me know how it goes… kzbin.info/www/bejne/d4TdgK2od5KUb6c

[@DagHolmen]

Amazing, subbed.

[@MrHada007]

Can you do tutorial for Sony slog video too

[@filmoverfilm]

This was really great!

[@shawn3d]

Thank you very much. Hope it has helped you a lot 😎

[@TGMATCHIM]

Great tutorial. Thanks

[@nuggerboi8278]

I needed this thank you

[@RelicRescueCrew]

Wow. This is the best and most helpful LumaFusion tutorial I’ve seen. Thank you so much ' please keep it coming. Instant sub from me!

[@artsahagun]

I have a big question i bought a Samsung portable SSD T5 for my Blackmagic 6K I reformatted it on my pocket 6K... When I plug it into my iPad pro to see my videos I only get document files not video... Need help?

[@TheAnthonyLJ]

WOW, these tips are killer! Thank you so much

[@shawn3d]

Glad you love it and amazing absolute pleasure. Have you tried the tips out?

[@whattamama9082]

I just got my iPad Pro ang looking around what I can use This video convinced me to purchased one . But I have questions i have VLLO app that I purchased do u think I can just used that or do u still recommend this? And does all the video I imported in this app is it still gonna be there inside the app even I erased it on my iPad memory..thanks

[@Gringo74.]

Good evening friend, I hope you are very well. I congratulate you on your very good video, please upload more Luma Fusión tutorials, greetings and happy Easter. saludos desde Argentina

[@shawn3d]

Thank you so much and greetings. Yes, that’s a wonderful suggestion. Is there anything in particular you would think is good to see? :)

[@acirfakcalb3162]

Wow! Thank you!!!

[@shawn3d]

It’s an absolute pleasure. Have you tried it out yet? Will be great to see your results

[@pa_maj.MARTINI-van-MAN]

Could you recommend what LUTs you have that would work well with the iPhone 12 Pro max. I'm picking one up in a fortnight. I'll be filming mainly in the UK/Northern and South of Ireland so you get an idea of normal climate conditions, not sunny Spain for example. I will be shooting in Log and also have Filmic Pro, V Log. Cheers in advance. Oh' I just got a Mavic Mini so I'll prob need those grades, I See you have them ✔

[@shawn3d]

That’s a good question, yes you can cross purpose the SpectrumGrades CineVision luts which have excellent looks for the environments you’re filming. Also works great with both your iPhone with filmic pro (both standard & Log). Just keep in mind the log in filmic pro isn’t a wide dynamic range and is more similar to standard colour. Both color profiles have been tested with the pack and works very well with the rec709 luts in the pack. Also it will be suitable for your mini. This will be an excellent solution for your setup.... spectrumgrades.com/products/cinevision

[@pa_maj.MARTINI-van-MAN]

@@shawn3d Apparently the on board raw ( more of a computational raw ) is better, way better than what you can achieve with moment and Filmic pro on the iPhone 12 Pro max. I've found some good examples in low light especially. Thank you for the info...My wife was asking what I wanted for Christmas so your suggestions will be on her lap later ✔

[@neoterixx3440]

Much appreciated video professional and informative. Hope to se more Lumafusion content from you in the future. Also! Amazing looking drone shots.I myself find it difficult to color my Mavic 2 Pro shots in LM. If you are you using Mavic 2 Pro. Are you using d-log m and how do you fix the barrel distortion? Thanks

[@shawn3d]

These are great questions. Yes, the shots are in D-Log and you he easiest way to deal with grading the format is to use the SpectrumGrades LUTs. Basically almost plug and play with some basic tweaks as seen in this video. LumaFusion doesn’t have the full capability to grade as deeply as the LUTs. If you don’t have luts, then you can get by with contrast and saturation increases. This will give you a standard look which is still good. As for barrel distortion, that’s a good question and will look into it as to how it can be corrected in LumaFusion 👌😎

[@TABO744]

Wow I will be ordering this collection

[@shawn3d]

That’s wonderful. Will love to see what amazing films you create with these techniques and LUTs

[@giffwingsg3402]

Great video. What package do I need to buy for my LumaFusion

[@shawn3d]

GiffWings G thank you very much and pleased you love it. Are you referring to the luts? If so then it depends on what you film on. Let me know so you get the right pack for you

[@Edward_Nguyen]

@@shawn3d hi. I am referring to the luts for my travel film

[@G2RACINGPARTS]

Great Job!!!

[@thatwhatis.allofusallofit.6124]

Hi, thank you for this amazing tutorial. Question did you shoot the footage in LOG or not? Thank you

[@benjaminpowell1]

Ye I need to know this too. This might be silly question but what’s the difference between LOG and D LOG. I know D LOG is where all the colours go

[@dreamwevr]

Can I use the LUTS with iPhone SE and Lumafusion

[@shawn3d]

As long as you have LumaFusion installed then yes absolutely you can use the LUTs with your iPhone SE. the LUTs will work with any apple device with LumaFusion installed. Let us know how it goes with them 😎

[@dreamwevr]

@@shawn3d cool thank you

[@tikatiko]

i thought lumafusion had a three wheel corrector like shown in the thumbnail. Not yet though.

[@bushboxer]

Yeah that was a bit misleading gotta admit.

[@samgao]

My question is can I apply the same settings to all my clips? I have a ton of different clips and I want them to have the same feel in grading and tonality. And each time I have to grade it constantly..

[@shawn3d]

You can copy and paste your grades to each clip. It’s hard to explain here but it’s in the effects page of a clip you have graded. Will be easy to find. Let me know if that works

[@dukeandace2010]

You have a new subscriber 👍. Love these tips.

[@shawn3d]

Archie and Frankie adventures Haskins that’s truly wonderful and thank you for joining. This means a lot always. Have these tips helped you a lot?

[@Isaqiu]

9:30 ohh you're so creative

[@shawn3d]

Isaqiu Thank you for the feedback. Yes, thats one of the best parts of the tutorial. Glad you like it

[@ROUTES_SAUVAGES]

If I shoot with a GH5 in V-Log, the universal luts are good for that ?! Thanks!

[@shawn3d]

Yes they are perfect for it. There are log luts in the set that work incredibly well. The sample images on the site are actually GH5 v-log samples without any adjustments added. So you can see they are 👌😎

[@matt_pang]

Is it possible to isolate skin tones or grass and color grade ?

[@dreamwevr]

Can I use with lumafusion & LUT app and is the software easy to create if you don’t have color grading experience

[@shawn3d]

Yes absolutely. It’s designed to be user friendly and easy to use. Just follow this tutorial and you will be all good

[@dreamwevr]

@@shawn3d thank you

[@highwayheadspace]

can I manually transform log to Rec.709 with this app?

[@shawn3d]

You could however it will be difficult to get a good and accurate output. This may depend on your skill level with grading. In saying this, LumaFusion native color adjustments are very limited. I would suggest using SpectrumGrades LOG LUTs applied to the footage and then do your manual adjustments tweaks to fine tune to a look you like

[@highwayheadspace]

@@shawn3d thank you so much for responding :)

[@kevinpraditya7892]

wow its really great. thanks.

[@shawn3d]

Thank you kindly and hope you managing to use these techniques to improve your films. Have you tried any of it yet?

[@kevinpraditya7892]

@@shawn3d not yet. but I would try it on few of my clips I took on my last trip

[@allainfrancisco7584]

Great content! Did you have a recommendation between the universal package vs the mavic air 2 package? I shoot on mavic air 2 (mainly), go pro, and my dslr. Also once I purchase the packages does it transfer to multiple devices?

[@shawn3d]

Hi Alain, if I was in your position with your gear requirements, I would certainly go for the SpectrumGrades CineVision Pro Universal product. Also yes, you can use them on all your personal devices at the same time. Keep us posted on your results as it will be great to see what you come up with 😎

[@shuyizhu]

Hi friend. Why when I use cross dissolve in between two shots, it shows so blurry to transform? But I saw you did it in the video (the mountain part), it seemed so clear.

[@shawn3d]

That’s very unusual. Did you manage to sort it out? Maybe you shifted the video in the timeline which may have caused the blur?

[@MadMonkMani]

Great video love the tips I got, haven't seen anything else like this. Those small details like adding the frame on top of a frame are the types of hacks I love. I do something similar by doubling my main soundtrack and then panning each to the left or right and it gives a bit of a fuller sound when needed.

[@shawn3d]

Nice tip on the audio. I’m trying to understand how that would enhance the fullness when the track is already stereo. Unless you’re using mono tracks?

[@PopKMedia]

Great content thanks :)

[@shawn3d]

You’re so very welcome and thank you for your wonderful comment. Much appreciated :)

[@martin_funk]

Nice Video .. i Love luma Fusion 😄✌🏻

[@shawn3d]

Hey Martin, Yes I certainly know you love LumaFusion and you're doing amazing work as usual. Did any of the tips here help you my friend? :)

[@funkdesign1033]

I already knew sorry .. but I would be very happy about more tips

[@dreamwevr]

Do you have lumafusion color grading anamophic look footage of landscapes, cities like LA, NY etc, traffic, etc basically good anamorphic footage you can drop into your lumafusion edit to get that anamophic cinematic look if not will you do it I think the images you created are very pro quality very nice! Thanks

[@DD-mt2bq]

quick question, these affects work if i film on my iphone 11 pro right?

[@shawn3d]

ant if you have LumaFusion app on your iPhone then yes you can definitely use them

[@rhymeswithpulverine2169]

Scopes; waveforms for proper exposure coming soon?

[@shawn3d]

That will be great if they do imminent it. What you can do in the meantime is visually judge when you don’t see anymore detail. It works pretty well this way and can trust your eyes in this to a good degree

[@KrishhyKrishh]

Wow very useful dude I am being using LumaFusion for 1 n half years n now I have found my mistake ....:(

[@shawn3d]

This is very interesting. What mistake was it that you were doing?

[@gutekzpoligonu]

Can You import luts that You have, like from Color vision or Tropic colour?

[@shawn3d]

Yes, absolutely they can import these LUTs into pretty much most editing programs on mac and pc. Let me know if you get them working and how you enjoy them

[@argon3329]

Thank you that’s was another level.

[@shawn3d]

Thank you kindly. Much appreciated. Have you tried the techniques yourself? Would love to see

[@pa_maj.MARTINI-van-MAN]

Great, subbed 👍

[@shawn3d]

Excellent. Great you can join and welcome. Have a legendary day 👌😎

[@pa_maj.MARTINI-van-MAN]

@@shawn3d Thanks 👍👍👍

[@thavb.9135]

Thank you soooo much i love this vdo

[@Fuji1337]

what music is playing in the background?

[@doubledark2]

wow, this is amazing! I multi-cam record long interviews onto Atomos recorder using ProRes; this by-passes the 30min record time and gives me ONE file from each camera. I don't want to deal with many smaller files. Could I transition to editing on a iPad rather than iMac?

[@shawn3d]

This is a very interesting question and potentially can be done. As you know prores is very data intensive, so it’s about managing drive space in your device. Also maybe what can be done which might be too much of a hassle is using proxy files in LumaFusion and export the xml to render out in your editor for final output at prores again. Either way you can do full edits in LumaFusion but have to check how it handles large prores files which I haven’t actually tested at this point