Advanced Fire Panel Training - Integrated Fire Safety Systems Ltd

This video gives users a brief overview on how to perform the basic operations on an Advanced Fire Alarm panel.
Learn how to reset an Apollo Manual Call Point (or Break Glass Unit), Access "User Level 2", Reset the fire Alarm, Disable inputs, Disable sounders, and re-enable devices or zones.

[@playerlol8641]

Video Request: Make a video on the process of programming the Advanced MX4200 e.g software guide and uploading process.

[@michaelgriffiths8912]

I'm sure the information was good - but I couldn't hear what was being said due to someone playing the piano in the background. It would be a good idea to record the video in a quieter location, or edit the unwanted sounds out in production.

[@mikethemask1525]

Hi there my mxPro4 is showing a Fault led then on the screen says zone 1 fault but there is not fault or fire as nothings actually happened or changed. How do I clear this and just have working normal as before? Any help would be appreciated

[@integratedfiresafetysystems]

You'll need to press right a few times to determine what device is in fault.

[@magyaradam8957]

How do you isolate one level on a fire panel?

[@integratedfiresafetysystems]

You would need to Disable the associated zones

[@rafeeqabdulkareem6109]

Hai, Could you please explain, how to put time delay for Sounders?

[@integratedfiresafetysystems]

Hi, thanks for reaching out. We have to recommend that any works on fire alarms are completed by competent engineers with the associated accreditation. If you have technical queries such as this one, Advanced Electronics may be able to assist over the phone, they will want to know your engineers name and company to ensure they are talking with a competent person.

[@alicenyirenda6044]

Show me how to connect cables inside control fire panel

[@alicenyirenda6044]

Try to be slow

[@Davidoek]

What's the panel make and can it be program without a pc?

[@integratedfiresafetysystems]

This is an Advanced Electronics MX4000 panel. The basics can be programmed via the buttons on the panel but it's advisable to program via PC.

[@magyaradam8957]

How do you isolate one level on a fire panel?

[@hassanyousif7384]

Hi How to get level 3 password if its forgotten ? Is there default password for access level 3 Thanks in advance

[@darthpaul8792]

Level 2 default code is 10000 or 10001 Level 3 default code is 7654

[@rafeeqabdulkareem6109]

​@@darthpaul8792 could you please explain, how to put time delay for Sounders.,?

[@Stratoszero]

Nice that you take the time to do this but no need for this stupid modern fad for background music, it makes it hard to concentrate on unfamilair instructions.

[@magyaradam8957]

How do you isolate one level on a fire panel?