AEA How To: How to replace valve seal for AEA Max

[@texasranchadventures]

Thanks for the walk through! I just swapped out mine successfully. I had a hard time pulling out the old seal as mine didn’t just pop out as yours. I had to hack it up to get it out. I found a nail with a head that fit inside and then yanked it out. I damaged some of the threads a bit but it’s holding up just fine.

[@nigelblack3979]

I had the same problem. Works good with a small metal hook.

[@1970sergey7478]

Мне эта винтвка нравится своей простотой)))

[@caleb_7777]

Maybe I missed something, but what about the white O ring that you said was broken and removed? I did not see you replace it.

[@glasserallen]

I know I'm confused about that too? Can you remove the air tank without breaking the white o-ring?????????

[@tobyiy]

maybe this video is "how not to replace valve seal"

[@blacksnips3164]

@@glasserallen yes i want to know it too !!!

[@marteinzunza6444]

@@glasserallen where can I orden that white oring? 🙏

[@marteinzunza6444]

@@glasserallen where can I order that white oring that you didn’t put 🙏

[@ronnieumberger]

can you make the HP MAX 45 CALIBER a bottle version ?

[@nigelblack3979]

Very detailes. Best Video of the process. I loved “Hentai, Hentai(Hand tight, hand tight)” the most😂

[@1gramps4julian]

Was there thread-lock on the threads?

[@user-vn3qz3pl7r]

推针供蛋后与管接触后激发时会不会漏气？

[@yunielalfonso773]

Those o ring on Aea hp max are metric?

[@Cincymike1]

I hope body makes metal version of these valves.

[@floridamanairgunchannel2066]

Mabye a dot of silicone oil on that valve seal before placing it with the punch??

[@DeNice10000]

Any updates on the ship date for the S45. Your last video said you would have them soon. That was about 3 or 4 weeks ago.

[@sigshooter6213]

Yep we will have it soon and gradually ship out

[@conradfirmes9528]

How soon is soon buddy?? Just trying my patience my friend🤷🏽‍♂️🤯

[@DeNice10000]

@@sigshooter6213 I’m trying to be understanding but I’m going to request a refund if it doesn’t arrive in two weeks.

[@arkfeldpro]

The fact that it has been so difficult should ethically show that these pieces of artwork are being hated on, therefore must by my account be worth the wait. Hang in there, cuz when they arrive and you want one it will be another year maybe..just sayin

[@Airgunplinkster-1688]

How to bleed the gun ???

[@chen7279]

你在国内有pcp卖吗？

[@arkfeldpro]

I had a dream last night that the S45 shows up, and they carrier only let me see it..talk about the "slowly running down the everlasting hallway!!"..I send mine to The AEA FAC, & S.H.S. ( SAME HOLE SNICKETS) BIN-TEEZY, & the 500..you know who we are..

[@leelight8395]

一般多少钱，我刷到你很早的一个中文视频说中国大陆也卖，现在还卖吗

[@TranceEnd2024]

How about a break down of the .457 because it is different inside and I cannot figure out how to stop the leak from barrel/breach. Edit: one year later- this part in this video worked to stop my leak...I ordered the .457 version of the valve seal.. Hope it helps someone with barrel/breach leak.

[@glasserallen]

Sorry to hear you're having problems I have the same caliber and model you have I replace the two black o-rings that he sent me on the air tank nipple put it back together up against the main body attempted to add some air and it's still severely leaking just like before so I don't know what the hell's going on.

[@TranceEnd2024]

@@glasserallen This very piece that he is installing on this .357 I ordered for the .457 and it stopped the leaking from the barre/breach completely.

[@arkfeldpro]

To everyone in league with the extended time on the s45, I mean no frustration when I point out this from a simple jealousy point of view, these things are being hated on by every faction, when it's out of there hands, and I know personally that they had to be coming out some change because they had to change ports by a whole MF COAST!. THEY WOULD STILL BE STALE IF THEY DIDNT STEP IT UP. So, understand the unity we have here as AEA Elitists, and take a knee, and if you can't, I understand that it isn't the right piece for you at this time...but if it is...well...I send my respects to all of our journey while BIN & Team figure this out!

[@robcoastalga8279]

I agree. Updates are still appreciated, regardless.

[@arkfeldpro]

@@robcoastalga8279 I'm in agreement, which leads me to sadly believe that updates are not available because everything is that stopped. I take this out of the law. I hope they already have them and are fully prepping and sending out so that this week we here the great news that they are on the way in waves every day...my Mr. HOLLOWPOINTS 155grain .457 are looking so good to destroy everything with...lol...

[@KTMGT]

What can i do, when all the Air comes of the Barrel...i dont even get Pressure on my tank because all comes Out the Barrel

[@bananekrumm]

Hammer the ring like he does. Possible can be to fill with a high pressure bottle from diving. The problem is to get pressure at once to get the rings fit. With a kompressor sometimes not possible. If yo can pump an it loses a little, make shots without ammo. 5-10 times.

[@RougeSanta]

Lock the bolt in position (dry loading)

[@TranceEnd2024]

This part (..457 version in my case)worked to stop a barrel/breach leak..

[@joaoapcd]

amigo, boa noite. sou do brasil, tem um link para comprar a peça?

[@GaryKissinger]

Yes. The white O ring that the guy destroyed as he disassembled the gun: I too would like to know why he did not replace this seal. BUT......BUT......he seems to be very familiar with this repair and I am guessing he has done this before. This leads me to think that the white seal is not needed. (Maybe) Still, I would like to know the story behind that white O ring. My .357 is currently leaking from the charge (probe) port. Damn. If I perform his fix I WILL try to insert SOME O ring in place of the white seal in question. I welcome comments, PLEASE. Thanks......

[@alexisgonzalez-pv6wp]

hello friend a question. can be made regulated and bottled an AEA HP varmint

[@sigshooter6213]

Yeo my friend we have regulated version

[@westclevelandoriginal9677]

hi, do you know if the air tank is changeable to a carbon fiber in this hp max ss .45 ?

[@sigshooter6213]

Max45 no, S45 yes

[@kevinngataba2391]

I'm from India and I need o ring set for my hp carbine .22/5.5mm calibar, so can you please help me where do I order?

[@jackwagonhoedown4114]

Need update on S45…

[@sigshooter6213]

Shipping out soon

[@lastpro4438]

Does this go for the .45 HP max's as well? Bcuz I thought it was a balanced valve. If it is the same as a .45 when will extra valves be available on website?

[@sigshooter6213]

Yep my friend

[@lastpro4438]

@@sigshooter6213 when can we buy on websites?

[@sigshooter6213]

@@lastpro4438 any time aeaairgun.net

[@lastpro4438]

@@sigshooter6213 the part? I already have the PCP. Just want that valve part.

[@V3g3t41987]

what is the twist rate on the hp max barrels? you seem to forgot how important twist rates are for accuracy and slugs. also is the hp max or challenger pro choked? please stop choking the barrels, it makes slugs perform horribly. if you wanna take a barrel design that shoots slugs and pellets super accurate look at the octagonal rifling in the air venturi avenger rifles. we need different twist rates for different velocities...it is the only way to be accurate at higher speeds. i make custom supersonic ammo for the aea rifles and the twist rates are all setup for sub 900fps shooting. id really like to be able to choose my twist rates and have you sell extra barrels considering how easy a barrel swap is. this is the one area where FX is really destroying the competition. FX has twist rates listed as well as a multitude of barrels available and they dont choke their rifles because like i said it makes slugs perform very poorly, you are supposed to be sizing your ammo anyways not letting a choke resize the pellet or slug for you as its passing through. the amount of velocity lost and accuracy lost by slamming through the choke kills it every time.

[@hivmonster]

First, do you have a website to buy slugs from? Second, do you know what twist rates should be for specific slugs? Third, has anyone tried having barrels made? It's pretty cool fx has multiple options, but at some point it's not on the manufacturer to make everything. Forth, how much power do you think is lost with barrel choke?

[@prophy4736]

i have tons of different 30 cal options as well as 45 and 50@@hivmonster

[@prophy4736]

yes i do know all the twist rates now. a year later but i got all the specs now. after purchasing and measuring them myself i might add@@hivmonster

[@mikekerns3774]

My AEA challenger backfired and send the slugs and plastic off the back of the clip in my face. Pretty nasty cuts! I unscrewed my barrel and noticed a o ring not in place. I bought it through Zachery and he won’t contact me. Don’t buy from him. I almost blow my face off and he can’t even fix my gun. First time Iv ever had problems and was thinking of getting the Zeus. Can anyone fix my gun. I’ll pay. Thanks

[@jkitto2008]

Why didn't you put the white O-ring back? WTH 😂

[@CarlosRodriguez-li1ol]

Excuse me friend where can I guet this piece

[@undeadaeon9992]

Message bin from the pellet shop.

[@willhamerslagh8902]

How can I get a o ring kit

[@klauscleber4519]

@@willhamerslagh8902 The german company "GoGun" sells them (just for the .357 / 9mm / 7,5 Joule german version - but they should also fit). GoGun also has distributors in the US.

[@antongonist8294]

Why can't we get an answer on the white ring that was below the gauge? Multiple people have asked this. I did read a comment on another video saying that it works fine without it. They don't sell a replacement part either.

[@sigshooter6213]

You can get it free from your dealer, we only can take care of our own customers

[@antongonist8294]

@@sigshooter6213 I don't see it offered anywhere. In this video you didn't put a new one back in. Can you tell me what it's for, and if it doesn't matter why is it in there?

[@airgunningyup]

@@antongonist8294 its a crushable nylon seal , generally 8mm diameter , 1/8th thick.. theyre sold on grainer as nylon washers.

[@antongonist8294]

@@airgunningyup Ok. So does it have a function?

[@airgunningyup]

@@antongonist8294 its a seal

[@BA1AAA]

您那事FBI怎定奪啊？

[@user-nv2id1xr6p]

吊销枪牌，面临诉讼，把警察朋友也坑了。大概率不让他在碰枪了

[@BA1AAA]

@@user-nv2id1xr6p国人果然会坑人，之前ACFUN上大红大紫，但是感觉有点太过淫荡........

[@glasserallen]

When the air is removed, is it supposed to have two white o-ring gaskets???????? When I took mine apart it didn't have any white gaskets, at all maybe that's why it's been leaking? it's had a leak to it ever since I bought it brand new,... brand new out of the box. I just recently replaced the two black o-rings on the air tank nipple put it back together and it's still leaking exactly like it did before anyone have any ideas?????

[@glasserallen]

I wish you would make a newer video there never was a black o-ring under my pressure gauge and to remove it it was a totally different screw it was not the screw we use a big screwdriver it was a screw were you loosen it with a wrench totally different than what's in the video so I'm totally confused that's why you need to make a new video please.