5 Things You Need To Know About Unger Hydro Power DI

[@charliethackeray8484]

Thanks for a great videos - I’m thinking of getting on purely for domestic purposes and family members to borrow. I live in a hard water area and have a water softener. Given the resin bag use it makes sense to use softened water, however my outside tap is hard water . I currently would need to attach the hose to a tap in the utility room. Would that be practical or too much of a mess? Or should I replumb the outside tap? Thanks in advance.

[@aemackintosh]

It is possible to connect to an inside tap if you get the right hose attachment for the tap. Hozelock do some good adapters. There is always a risk of making a mess though I suppose. It would be better to fit an outside tap if possible.😉👍🏼

[@charliethackeray8484]

Thanks for your advice

[@karl212]

Would you recommend one of these just for personal use ....cleaning windows perhaps every 3 weeks ....

[@aemackintosh]

There are cheaper options that will do the same thing.

[@victoriababkina6796]

Amazing video! Could you please advise if this can be connected to the apartment tap (to clean balcony windows) there is no garden hose but it still seems a great idea for cleaning large windows on the balcony

[@aemackintosh]

Yes it would be possible if you can get a length of garden hose with an adapter to connect to your inside tap.😉👍🏼

[@victoriababkina6796]

thank you for a quick reply! one more question, if you don't mind, can it only be connected to British drinking water taps or can it be to taps that have hard water? I am based in Dubai and here the tap water isn't drinkable @@aemackintosh

[@aemackintosh]

Yeah, it will work, but the resin will need changing more often.

[@victoriababkina6796]

Thank you so much! Really appreciate it your help! and thank you for all your videos, very useful content! @@aemackintosh

[@andrewstamps2806]

Thanks buddy ive never used but very interesting anyway another great video and thanks Andrew 😊

[@aemackintosh]

Thanks!😃👍🏼

[@ml6cut463]

Can i use this with my van tank pumping to it or does it have to be from a tap only?

[@aemackintosh]

Yeah I’ve seen van Systems that use it like that.👍🏼

[@jackbaker4133]

Everyone has been informed to change resin bags when the ppm gets to 10-11. I proved this theory wrong on 10/16/21when my meter was showing in excess of 80 ppm. The unfiltered water I was using measured at 220 ppm. The bag I was using had less then 10 hours of usage. I checked the water coming out of the unit to see if the meter was wrong but everything was in check. Despite the high ppm, the windows turned out perfectly clear with no spotting. My last meter reading reflected approximately 110 ppm. This took place in Marana, AZ.

[@dominicdimauro]

I have the HydroPower Ultra 1 stage unit. The top and latching system is essentially the same. I can't get the damn thing opened or closed, because the fit is so tight! Do you have any tips?? Thanks!

[@aemackintosh]

Yeah it is tight. Hold it between your feet to hold it in place, press down on it with both hands on the handles and turn firmly. Lefty loosy, righty tighty.😉👍🏼

[@larsnevens5099]

Hey! Can you use it to purify rain water?

[@aemackintosh]

Yeah.👍🏼

[@propgear123]

Looks a great bit of kit bud. Do you still recommend this as a good way to try a pire water system? Watched loads of ya vids today bud it is uncanny how many things you do the same as us haha i taught myself most of it and i am happy to see i do it nearly as good as you lol only thing we dont do is clean windows so may as well do those as well just not sure what way to go yet 🤔

[@aemackintosh]

Depends how hard your water is from the tap. There are cheaper resin vessels available that will do the same thing. This one is just more convenient with the wheels and tds meter built in.

[@propgear123]

@@aemackintosh it does look good, I also expected them to be big and bulky for some reason. I am essex hard water area

[@unseen9404]

What about the newer DI filter model (the one with green cap)? According to Unger, you should only use the Ultra Resin bags with it (the cyilindrical-looking ones), but those have a specific order in which they go in the filter - red ones on bottom, green one on top. Can those resin bags still be rotated around to ensure maximum usage? Because from pictures I really don't see any structural difference between red and green ones. If not, can I just use the normal resin bags in newer model as well?

[@aemackintosh]

I’m not entirely sure, but I think they have just done that so you end up buying more filters from them. It is just resin at the end of the day.

[@torreswindowcleaningmemo8210]

How is the pressure on it?

[@aemackintosh]

You don’t have any real control over the flow, it depends on the pressure you get from the tap your using.👍🏼

[@torreswindowcleaningmemo8210]

@@aemackintosh but is it strong good?

[@troyarthur829]

Other resin type filters you can clean the resin by pouring in salt. Can you regenerate this resin the same way?

[@aemackintosh]

I expect so. All resin is pretty much the same.

[@Cryingswans]

Troy this is interesting can you explain? How much salt for a machine this size?

[@troyarthur829]

@@Cryingswans there is a few videos on you tube which you can get it explained better than I can do.

[@bogdanelgiu7822]

Hello, I have the Unger Hydropower Ultra and after installing an active carbon and sediment filter i get very little water out, like 1-1.5l per minute with normal household water pressure. My question is, can I boost the system or do something to get decent water pressure out of it without dismounting the carbon and sediment filter?

[@aemackintosh]

Make sure you have the pre filters the right way round so they are not restricting the water flow. It is possible to get a booster pump if your pressure is low. This will help push the water through at a better rate.👍🏼

[@bogdanelgiu7822]

@@aemackintosh thanks mate!😀 I will try it👍

[@AW-Services]

The OEM Green tap connectors where shite and needed ptfe tape to stop them weeping. Great video Ash

[@aemackintosh]

AW Services Thanks. Yeah a bit of ptfe tape does come in handy. The new version has a number of good improvements.😃👍🏼

[@mr.d7372]

Could I ask: I don't have room in my van for a permanent fixed system as I do interior cleaning mainly. If I wanted to clean 3 storey flat blocks, what do you think would be the best solution if I couldn't guarantee the availability of a tap? I'd like to invest in to very-very best.

[@aemackintosh]

A trolley system could be the way to go. Check out the Pure Freedom trolley. It will pump from 25litre barrels of pure water. But you will need to provide a way of making the pure water separately.👍🏼

[@kobepaz]

What do you recommend for hard water on windows?

[@aemackintosh]

An RO system is better for filtering hard water.😃👍🏼

[@UltraClean509]

How is the pressure ? does it reach good on 3 stories ?

[@aemackintosh]

Yes, but it will depend on how good the pressure is from the tap really, you won’t have much control over it.👍🏼

[@michaellewis7470]

Great tips! Could you please point me in the right direction to purchase metal inlet and or outlet connectors?

[@aemackintosh]

Michael Lewis Gardiner have a great range of hose connectors on their website. I put a link in the description of the video.😃👍🏼

[@johnc495]

How do you store it if I only use it once a month? i.e full of water or completly empty it and will it dry out the resin?

[@aemackintosh]

The resin will start to deteriorate once you have started to use it. Keep spare resin in a sealed container.

[@Patinaa]

Hey amazing video and all of your other ones too , i would like to ask you a question i doo have experience in Traditional and Wfp Window cleaning , as i used to work for someone for 3 years , and i would like to purchase my own van very soon and start everything on my own , my question it’s , 1 should i buy a water fed pole system installed in the van (purchased new or let’s say me to build it) and 2 should i buy Unger hydro power di and use it for couple of months , and i will also doo traditional window cleaning aswell , or just to buy van and to instal a nice 500 litre system

[@aemackintosh]

Depends on your budget I suppose. I think a van system will be better in the long run and will ultimately help grow your business and look more professional.😃👍🏼

[@darrylscott6648]

Do you have to change the resin often in these things? Or will it depend on how soft/hard your tap water is to begin with?

[@aemackintosh]

Yeah, it depends how hard your water is and how much you use it, but you might need to change it every couple of weeks or maybe once a month.👍🏼

[@stevem7250]

Every time I look at some cleaning equipment, u pop up lol is there anything u haven't got. Gd videos

[@aemackintosh]

Thanks! I’ve tried quite a few different bits of kit over the past few years.😆👍🏼

[@tenerifesouthcheerleaders6258]

Hello! I am looking for some guidance. My partner is looking at buying Unger Hydro Power DI. Does any body else use this machine? How long does the resin last? I know this can be a vague question but for a bit of an idea. We would really appreciate it. Thank you

[@aemackintosh]

How long the resin lasts can depend on how hard your water is.

[@Paulgreasley]

the resin is used in water softener's, we use one for our commercial dishwasher we clean it with salt every 2 months and the resin is good as new. Could this not be done with the unger? saving a lot of money?

[@aemackintosh]

Not sure about that. I’m not really very familiar with commercial dishwashers I’m afraid.😬

[@Paulgreasley]

@@aemackintosh Basically the water softner is jus a metal Unger. I will get a water reader and test it and let you know.

[@DeKiewicz]

Any idea in using a sort of prefilter on this 2x6 l Unger which I have ? And will it have any or no effect in preserving the resin ?? My water hardness is terrible 450 ppm ,but an RO and the cost of it doesn't quite justify my weekly use of pure water as it is with customers at the moment . So untill the weekly use of pure water use doesn't exceed the current needs I would still use the 2x6 l Unger Hydropower 😀

[@aemackintosh]

Yes, you possibly could, but I’m not quite sure about what exactly. The people at Varitech might be able to help you as they deal with a lot of different types of filter systems.😃👍🏼

[@DeKiewicz]

@@aemackintosh thanx , Will ask them at Varitech 👍

[@h.saoudi6654]

How do I know when to change the bags?

[@aemackintosh]

Check the TDS level on the meter. I would change it when it starts to creep up, before it gets to 5.

[@h.saoudi6654]

@@aemackintosh Thanks you for your answer. If you have time please make for us video

[@Explore-Romania]

great content mate

[@aemackintosh]

Thanks! Glad you like it.👍🏼

[@jc7879]

Are you able to connect a pressure washer to this?

[@aemackintosh]

I don’t think it’s a good idea. Why would you want to do that?🤷🏻‍♂️

[@jc7879]

A.E.Mackintosh Cleaning Services thanks for the reply. I’m a car detailer and am looking at mobile solutions for pure water. Your video caught my eye, so I thought I’d ask you the question. Water spotting is a big issue in the warm weather.

[@aemackintosh]

Ah, ok, I see. I guess it might be possible. It will depend on the pressure coming from the tap and how many litres of water your pressure washer uses per minute. The hydro power has a little device inside the hose connector at the bottom which restricts the flow for window cleaning but it can be easily removed which should give you a higher flow for your pressure washer. Also, if the TDS reading from the tap is much above 100ppm you will have to change the filter quite often, which could make it expensive to run. It depends how hard the water is in your area. I hope that helps.😃👍🏼

[@markspicer161]

Brilliant video as usual Can I ask where you got that metal fitting at the bottom that takes in the tap water as mine has snapped off like what happened to you??

[@aemackintosh]

Mark Spicer Thanks. Gardiner have a great range of hose fittings on their website, I put a link in the description of the video for you.😃👍🏼

[@markspicer161]

@@aemackintosh Thank you 👍

[@aemackintosh]

😃👍🏼

[@markreynolds1154]

I know this does not relate to this video. But what is the difference between Algoclear and Algoclear pro and where can I get Algoclear pro as there website doesn't sell it? love your videos mate you have taught me so much keep them coming (-:

[@aemackintosh]

Mark Reynolds Thanks. Algo Clear PRO is stronger for trade use only. The other is a weaker version for the domestic market.😃👍🏼

[@crystalwindowcleaning6019]

Just out of curiosity, why on earth would you waste resin purifing tap water for conny roofs and fsg?

[@aemackintosh]

Matthew Houghland It does make a difference to use pure water, especially on a glass roof, and the combination of a little cleaning solution with pure water on fsg makes for a great result.😃👍🏼

[@crystalwindowcleaning6019]

Yeah ok pure for glass roof, but makes no difference between tap water or pure for fsg, just a waste of resin if your using the customer tap anyway.

[@aemackintosh]

I think it depends how hard your water is from the tap also. It’s 500ppm where I live and you can see the residue left behind even on gag if you just use tap water.😃👍🏼

[@Cryingswans]

How often do u change the resin on this machine?

[@Cryingswans]

Rough estimate

[@Nathan-wf1pr]

thanks for vid! Would that unit in the small one bag unit work with a pro 45 foot pole do you think? thanks

[@aemackintosh]

Nathan It all depends on the pressure from the tap you are using. You may start to notice a drop in pressure at that height.😃👍🏼

[@portcityengineering]

Hey buddy, since you have a van mounted system are you selling your old unit? If so let me know!

[@aemackintosh]

Thanks for the offer but I’m not selling it for now.

[@realrecognizewill9350]

Does the "out" hose have to be a Unger nLite brand or can a cheaper alternative 5/16 hose work just as well on the Unger Hydropower Ultra?

[@vasilissidiropoulos9553]

How mutch litres of pure water are the new machine (hydropower ultra )making;;

[@aemackintosh]

Vasilis Sidiropoulos I think it will be the same, as it’s the same amount of resin, it is just in pods rather than bags.😃👍🏼

[@vasilissidiropoulos9553]

@@aemackintosh Thank u very mutch for the answer😃

[@cnsworx7986]

Did you go to expo, any vids.

[@aemackintosh]

cns worx Yes. Videos coming this weekend.😃👍🏼

[@thiagosoueu]

Hello, what is the technical name of this resin?

[@dubiangonzalez1884]

Thanks mate, great

[@shinecitywindowwashing4745]

If the windows are filthy like most we get. They will still need a good scrub then use the filter to rinse.

[@aemackintosh]

😃👍🏼

[@jh3779]

Hi mate very informative. Was wondering if it was worth investing in a purifying system or just to buy pure water as water stations are popping up all over the place now. I only want it for gutters and fascia cleaning to offer it along side my gutter clearing... Which is an extension of my gardening business in the off season. So not an every day need. What do you think pal? Think the stations charge about 4p a liter. Thanks

[@aemackintosh]

Up to you, but I personally think it’s better to set up your own way of purifying water. It will be cheaper and easier in the long run.😃👍🏼

[@jh3779]

@@aemackintosh cheers pal will probably copy yours, already have your pressure washing set up 😂. The water where I live is supposedly soft, think it said around 60. Think I could just a hose attached to a customers tap, run it through a unit and do it that way? I do have a tank but I'm thinking I'm only doing a couple jobs a wk 🤷‍♂️

[@aemackintosh]

Sounds good. Whatever works for you and your situation. Good one.😃👍🏼

[@lloydledgister4293]

Good video...

[@aemackintosh]

Lloyd Ledgister Thanks.😃👍🏼

[@swishcamp81]

“THE HOSE JUST ENDS UP “ TUGGING” ON IT “ hahah

[@marcspeight8954]

Would you be interested in selling it? I don’t want the new version. 👍😁

[@JasonDunlop247]

Yip, metal fittings where possible. ✌

[@aemackintosh]

JD 😃👍🏼

[@TradMan]

😁👍🏻👍🏻

[@aemackintosh]

TRAD - MAN 😃👍🏼

[@electryze6384]

Lets not ignore Godzilla in the background 0:30

[@dorusrudisill2162]

The connectors will break within a few uses. They are not a standard size. Stock up on the over priced connects...if you can find them! Better yet... buy a different unit.

[@aemackintosh]

Dorus Rudisill They are standard hose fittings that are very common in the UK. I would recommend swapping them for metal versions which are easy to find.😃👍🏼

[@dorusrudisill2162]

@@aemackintosh Thanks! Maybe it is the treading on my US unit but nothing matches up except the Unger connectors which seem to be out of stock.

[@aemackintosh]

Ah, that’s annoying. In the UK it’s easy to get metal hose fitting replacements, they sell them at gardinerpolesystems.co.uk I don’t know if they will ship to the US?

[@bryanlattamore874]

All that sweet sweet unger 🤤

[@aemackintosh]

😜👍🏼

[@rickkozarits8930]

100ppm jesus Ash,you lot have got really poor water ???? ,tap waters only 27ppm here lol

[@ikhurus5878]

It's a lot more on the coast, alot more.

[@rickkozarits8930]

@@ikhurus5878 so I believe Dan,me & my wallet are glad I live inland lol

[@ikhurus5878]

@@rickkozarits8930 it's like over 400 where I am, so an ro gets changed every 2 and a half years, with flushing a bit longer

[@rickkozarits8930]

@@ikhurus5878 WOW ! where dya live Dan ? I get away with just using Di :-)

[@ikhurus5878]

@@rickkozarits8930 I live near Brighton, so seriously chalky and hard water