AeroScout S 2 1.1m RTF with SAFE HBZ38000 Assembly (The Best First RC Airplane For Beginners )

[@fva299]

This beats the apprenctice by far! I had both and ended selling the apprentice... I was flying back in the 90's and just got back into it 6 months ago. Long story short with this plane I was able to work my way from begginer to expert! Now I do all kind of stunts with this plane including flying inverted 2 feet above the runway! I have moved now to skill level 3 and expert but I would have not done so without this plane!!! Worth every penny for what it is capable of doing!

[@stevestults1111]

Cautionary tale. On mine the carbon spar that transits the vertical stabilizer became irretrievably stuck about 1/3 of the way through, despite lubing it. Wouldn't budge, , ,even with pliars! Had to send it back to Horizon for repair. Sooooo. . .feed that spar in VERY slowly and if it starts to bind EVEN A LITTLE, pull it out and sand it until it fits snugly but doesn't bind.

[@soumyasahoo7436]

It's not available in India. Can you please help me to get one.

[@mikebird8290]

HI WES I REALLY LIKE THIS PLANE. AMAZING PLANE TO LEARN WITH TO FLY. PERFECT HAVING SAFE AND AS3X. THANKS FOR POSTING. ♥️🇺🇸🕊️✌️👍

[@keithroberts6978]

Just got my aero scout today I have mine apprentice and arrows big foot

[@payitfwdrcl6171]

Very Nice plane from Hobbyzone. I have one i take to the field. Makes a great warm up plane and also a trainer to have on standby for anyone new to the hobby that shows up to the club field. Very agile and quick for its size. Handles a little wind pretty easily. I highly recommend it. Plus - Horizon has the RTF version on sale now $30 off reg price. Great deal. 👍👍😉

[@rogerwells6229]

I just bought one. Thank you for the perfect assembly video! Really enjoy your channel.

[@jakeclauson9863]

My s150 came with a bad power supply cable. So far my horizon hobby purchases 2:1 with sort of minor issue. And customer service is about as bad as your expect. No technical advice what so ever. My new dx6 screen fades out 40-50°f and they said it's normal below 32 and wouldn't confirm that my issues were not normal. Already spent 250+ not going to pay for shipping both ways for them to tell me it's fine or tell me I did something wrong. After multiple attempt to get a straight answer they just say and it in. NOPE! Never again

[@timmtobin9251]

Hello from a new pilot in Michigan. You guys are a GREAT help to us just getting started in the hobby. I like seeing your Dad flying with you.

[@MerryBoozerRC]

Welcome aboard!

[@didierneeferc]

what is the different between the first version and the 2?

[@fiddlinwes]

I have it and think it's really great. I'm back flying after 30+ years ! I'm flying well, but just in the last week am confused. I'm flying with just AS3X .... it will NOT loop. I'm sure I flew loops in AS3X a few weeks ago. I have set up throws and expo for two modes. Even in the full throw setting ...no loop unless I disable AS3X ?????

[@HugDeeznueces]

I am buying this kit right now

[@markshoemaker65]

Curious question, can the wheels on the AeroScout S 2 be replaced with balloon wheels, thinking it can help soften landings more over help to ease any stress on the front gear...your thoughts???

[@chuckmaddison2924]

Seem to be out of stock at moment locally. I was wondering is the foam the hard beer cooler type or softer more flexible type.

[@AlbertHuth]

Does the aero scout balance on floats the same place as the wheels? Or is it different?

[@papasplanes.956]

When I returned to the hobby after a long hiatus, this is the plane I started with. That and the RF simulator I feel I'm flying better now than when I left the hobby{raising kids and 60 hr job meant no time] I now tell anyone one a FB page asking how to start that this is a great starter. Enjoy your channel, keep flying!!

[@fernandoalvarez669]

Greetings friend, give me one please...

[@craigschray4486]

Been thinking about this plane! Great timing.

[@MerryBoozerRC]

Hope you enjoy it!

[@cjctucson7683]

Just got this plane and have watched your vid of flying the beginner plane, the Apprentice I think. You operate it in SAFE mode and trim it. Not sure if it is the same as AeroScout, but it appears this one can only be trimmed in Mode 2 = expert mode. Have to try it on my rudder tomorrow if I can find a smooth surface. Thanks for going back to the first flite and to showing the controls at the same time. Can't wait to see you do the same with the AeroScout.

[@MerryBoozerRC]

it can only be trimmed in Expert mode or AS3X it will not trim in safe mode

[@USAF305]

Very easy to follow. Great job!!

[@papapsadventures6119]

My first, successful, flying model. I've since put lights on it! Wish I could show you a picture of it.

[@MerryBoozerRC]

you can on the MerryBoozer Facebook page ;)

[@victorrcjets7660]

Cool little training plane

[@rorystibbs5164]

Great vid , thank you

[@geofkane2365]

A really thorough, practical and helpful video. Thank you.

[@staydown.normal5323]

what is channel 7 d switch? on/off?

[@carlosponce3766]

No rebisaste el balance mevy hewy Teo

[@keithroberts6978]

Order one