Aerospike Rocket Engine (3D Printed)

My viewers get 50% off their first month of any crate by going to www.kiwico.com/integza50
Follow me on Instagram: / integza
Support me on Patreon: / integza
Discord: / discord
Reddit: / integza
Paypal me:paypal.me/jgomes1992?locale.x...
3D Models
Ceramic Rocket + Nozzles:www.thingiverse.com/thing:467...
Aerospike Engine (Source Video): • Additive Manufactured ...
Music
Kumare Brothers by Dialgo Artlist
Pizzi Waltz by Kadir Demir Artlist
Slime Time by Randy Sharp Artlist
Sneak Peek by Alon Peretz Artlist
Chartreux Noir by Bob Hart Artlist
Son of a Beach by The Polarity Artlist
Fela by Egozi Artlist
Concerto Grosso by Will Van De Crommert Artlist
Teenage Dream by Curtis Cole Artlist
The Treasure Hunt by GYerro Artlist
Witches Brew by CK Martin Artlist
Fiddler by Ben Phantom Artlist
Terres by Dialgo Artlist
Little Scientist by GYerro Artlist
Gettinginto Character by Oved Pinchover Quintet Artlist
El Mayor by Las Pampas Artlist
Early Dawn by Anthony Vega Artlist
Aria North by Ben Winwood Artlist
Glass Jaw by Bob Hart Artlist
Make It Rock Instrumental Version by John Coggins Artlist
Down the River of Hearts by Eyal Talmudi Artlist
Free Wheel by Rex Banner Artlist
El Ro Fluye by Reuven Bransburg Artlist
Non Piu Andrai - Ron Meixsell (KZbin Library)
#rocket #aerospike #3dprinting

[@trevorjaster4072]

Casually launches rocket in a town

[@danyael777]

ikr? I love how the neighbors have the lids closed^^

[@incubusfan4211]

casually hopes town is hit by rocket...

[@stevejohnson1685]

Casually tests rocket fuel and ignition systems in a wood-framed attic :-)

[@EzequielPR]

Thats something China would do

[@kevinnistor1954]

@@incubusfan4211 woah

[@NainKaigo]

Pro tip on the rocket fuel: Don't use plain table sugar. Use Sorbitol. It has a smoother burn rate and lower pressure. Also, mix the two ingredients with enough water to dissolve the sugar and heat them in a pan (VERY LOW HEAT!!). Once evaporated, you will have a lightly brown, thoroughly mixed fuel. Pour that into a mould the same dimension as your rocket cavity greased and lined with a thick paper tube. When it cools push out the fuel slug (grain as they are called) and you are ready to go. The paper tube and tight fit will help keep the flame from going around the outside of the grain and causing a pressure spike. If you need more power, push a rod into the middle of the grain before it cools. This hole will create greater surface area for the flame and the fuel will burn faster. For an even faster burn, create multiple grains. You can use these parameters to raise or lower internal pressure to suit how much your rocket can withstand. Check out Richard Nakka's site for all the information you would ever want to know about experimental rocketry. There are a ton of resources there for anyone who is curious.

[@hassiaschbi]

It also has the orbit in it, that alone makes it three times as potent☝🏻

[@kaysimpson]

excellent suggestion!

[@angulini]

i have to add some safety corncern about the tecnique you discribe for the pit and melt the sorbitol ill suggets to use a doble bath call baño maria. just to not get the mixture in contact with any hot flame or stuff that mixture from 90 degrees it self ignite trust me i have experience

[@angulini]

allso ill suggets to use a rasing base redox fuel that are more powerfull and more safety

[@donky335]

This can be extremely dangerous and he can use normal sugar just needs to make it in to a powder e.g. A ball mill

[@MrVaunorage]

so underrated channel

[@soggybanana4757]

i know, right?

[@yoloboogie3674]

he has more than a quarter of a million subscribers, not “so underrated” to me

[@exotikinc3397]

@@yoloboogie3674 Most people who make shit content have like 10m subs 😂

[@yoloboogie3674]

@@exotikinc3397 most? name 25 then there’s over 100 million channels that make shit content, i’m just asking for 0.00000025%

[@exotikinc3397]

@@yoloboogie3674 I don't know that many channels, I do know nikkitutorials, Morgz, ninja, t-series, Casey neistat, faze rug/rice gum, Jake Paul, and many more.

[@mr.disorganized6287]

I love that joke at the end! too many people would be too afraid to do that.

[@sharansavakar8569]

The hitler impression?

[@mr.disorganized6287]

@@sharansavakar8569 Yes!

[@mtmadigan82]

Lol yeah got a good laugh out of it.

[@abnormica]

You have to be really careful with those things. I was just walking around my neighbourhood recently, and was hit on the head from one out of nowhere. Now my vision is blurry and all I can smell is caramel wherever I go. I didn't really see where it came from, but a passerby said it looked like it was launched from a roof about 300 meters away. All I'm saying is stay safe!

[@integza]

You cracked me up ahahah

[@trustmeimapotato4708]

@Norm T launched a Goat? How far? Bro you gotta give us the details on this 😆 🤣 😂

[@patrikgubeljak9416]

@@integza rI'm sure someone like you can easily and quickly make a decent ball mill which will grind your powders to a much finer one. I did a little research project in high school on how to make rocket candy more powerful, by looking into sorbitol, mannitol, xylitol etc. instead of sucrose, and also by adding sulfur and metal powders such as Al and Mg to the mix. Mannitol, a bit of sulfur and very fine Al powder (which you should make by grinding charcoal and Al together in a ball mill, so the Al doesn't oxidise) was the best one. Don't know the exact ratios of the top of my head.

[@UltraVoltageAnd]

One of the best things that happened this year was discovering that channel. Thanks for making my days a little easier

[@TheDryOneGaming]

Build a ground effects vehicle using one of you engines

[@onlinehelper374]

Definitely

[@dogo7543]

uhh 666 likes... is this a sign???

[@f-16storm39]

@@dogo7543 I changed it, now it's 667

[@gppg1799]

Hey Ineska, just want to let you know you are a bright light on this gloomy globe and you continue to inspire me and through my my community to be positive, have fun and make it achieving great things that little bit easier. Thanks Buddy! Keep up the good work/life! Brilliant

[@delta8388]

RIP, Grant Thompson. Thought of him when Integza was talking about sugar rockets.

[@beaconblaster33]

same

[@mattspringer1327]

Yes same here.

[@SC-RGX7]

Same

[@odunt007]

Theme: a 3d printed vacuum cleaning robot that can also mop. Also intelligent enough to not mop carpets. Get us to 2k likes and Integza has to kiss a tomato...on his next video! 😂

[@adequitevelocity1089]

A rocket powered one

[@odunt007]

@@adequitevelocity1089 where do you wish to vacuum? the moon? lmao! But i do like the sound of that though! aha!

[@adequitevelocity1089]

Maybe

[@christianletzerich6523]

Well sjit, printer secured man

[@odunt007]

@@christianletzerich6523 we'll see aha

[@doit597]

dude but you hadn't made a rotary engine yet, had you joined a challenge to make every type of them ? br br br br br br vroom vroom DeLorean was about to had one, in a concept

[@doit597]

since you made a rocket... and joined a space race.. you should make an anti-meteor safety system!! or.. the at least a Home Anti-Theft, anti-intruder system, crazy amount of crazy rockets will surely handle it hehe

[@doit597]

Integza, can you make a camera? i saw somewhere a 3D printed lens body. that's might be fun

[@doit597]

and also, when you will make a video with Ivan Miranda?

[@joeflosion]

Enjoy that 3d printer dude. Best idea I've seen

[@justsomebigfootthe3rdwithi795]

I think u won

[@guitfidle]

I absolutely love the mix of humor and science you have here. Well done 😍

[@AshenCrowler]

Looking back on all the videos I watched from this channel has made New Years all the more pleasant. I'm really glad I discovered this channel a few months ago!

[@evilvsawesome]

Integza, I have 2 challenges for you! 3d printed flamethrower Or A fully 3d printing EDF ( Electric duct fan basicly a electric jet engine) only parts excluding parts are wiring and stator shaft Maybe use ceramic resin for the rotor and carbon fibre filament for the casing?

[@conor123459]

You beat me to it...

[@conor1475]

Didn't he do that all ready? 🤔🤔🤔🤔

[@evilvsawesome]

@@conor1475 I don't think so, maybe tho, I thought it would be a cool idea

[@evilvsawesome]

Maybe to make it Christmasy. make it look like a sled or make a few and lift a mini tree 🌳

[@jas7915]

Yessssss

[@DarkLight007]

Theme: Electric Jet Engine (turbojet or with air bypass). Use a brushless motor from a vacuum cleaner (100k rpm) to drive a compressor. Jet fuel on the combustion chamber and don't use a turbine at the end. Let all the hot gases get out of the nozzle! This could be a cool project!

[@user-fy8oi5me9m]

👍

[@noctecordivesalus9319]

Yes, why not

[@user-le7gs9rv9j]

This is the worst idea i've heard in my entire life.

[@noctecordivesalus9319]

@@user-le7gs9rv9j hahaha bro, u crazy crazy

[@DeliciousDeBlair]

Your idea is easier than mine! [actually I am already planning how to build a fully ceramic composite jet engine housing at full scale!] I just want to see if the ceramic can handle the heat too! /)/) ( 'ˬ') @(>_ )-b \) \)

[@itz_javaaa3560]

It makes me so happy to see one of your designs work! I enjoy watching these videos man please keep them up!

[@fabricio-agrippa-zarate1000]

For anyone not living in Europe, please take a time to admire those beautiful buildings around Integza's balcony. So lovely.

[@411Light]

Use a small rocket to lift a steel cable deeply conected to earth in the middle of a storm. Have a bucket filled with salty water between the earth and the cable to instantaneously create HHO when the thunder strike the steel cable. And admire a nice explosion ! :D PS : Do not do this from your balcony this time :D PS2 : This ceramic resin looks awesome PS3 : Upvote if you wanna see the world (or bucket) burn !

[@helkate6274]

Ridders on the storm

[@CaptainKwak]

Here's a salty comment for you

[@casamientopilarychristophe9752]

Or better, use a pure silver wire!! :O

[@opiwaran354]

Bruh he just straight up launched exploding rockets in the middle of a city My kind of guy

[@yourmusic9452]

hahahaha that was cool

[@1STGeneral]

And no one cared what a country

[@genesis6646]

Great project, great comedic timing, great guy overall! You gained a subscriber, keep going!

[@user-hh1dl6bl5u]

I've always wanted to build Rockets but you've inspired me to actually do it. Thank you integza.

[@matthewbrown1206]

Theme: You should build a miniature manual transmission!

[@NickyLunaLove]

“She likes k-pop and I like explosive engines” y e s

[@UncleJimmema]

If you are familiar with the film 'Hunt for the Red October' the plot focuses around getting a Russian sub with a new type of propulsion system called a "Caterpillar" in the movie. If I remember right it basically used an Archimedes screw to propel the submarine with little to no cavitation, thus making it run silent. That would be kind of cool to explore.

[@vurtua7]

I really hope to see more of this project! I love that you're going with the aerospike design!

[@daives01]

Theme: make steerable rocket with liquid fuel, or maybe (perhaps more attainable) like a multi-stage rocket. Also I'm no expert but maybe next time launch the rocket somewhere a little less populated haha :) I laughed so hard when I saw that EDIT: If I win the printer, I will learn fusion 360, design and print a tomato, and take a bite out of it. Let's make it happen.

[@daives01]

Yeah no scratch the very first one, multi-stage rocket is a way better (and possible) idea

[@manuellira4089]

stop hacking likes to win

[@stevecummins324]

Hybrid rocket... Plastic as a fuel. Decomposing of hydrogen peroxide as oxidised. For steering... Spin rocket, and let extra gas out on side of rocket. That changes the direction of thrust.

[@daives01]

@@stevecummins324 clearly you're smarter than I am haha that sounds cool

[@manuellira8854]

@@daives01 hey ok I trust you but can you and your people help my friend to win please its name is santiago larrain and his comment is no more than 2 hours ago plaese??

[@spectrey1936]

Integza: i dont wanna buy a kiln cause its tooo expensive Also integza: so basically i am giving away three 3d printers

[@alphabravo3683]

Hmmmm... how about building a new kiln using Aerogel or aerated-concrete. It seems to me that if you want to get more extreme ceramics might be in your future. Post Hmmmm - if you 3d printed a ceramic kiln liner that could be the foundation around which you could place the insulation.

[@adriansaidan1736]

@@alphabravo3683 printing the lining is massively cost prohibitive. 3D printing excels at producing items of complex geometry for cheap (compared to tooling up for mass production or machining traditionally) but it is not the tool for bulk material (such as furnace lining). Just one liter of SLA resin costs anywhere from 60-150$, and given that ceramic resin is likely a lot more advanced than conventional resin, i would not at all be surprised if a bottle surpassed 150. On the other hand, kaowool lining (refractory wool) can be had for about 100$ for 24"*12"*2" which is sufficient to line a small furnace in its entirety.

[@robantsin]

@@alphabravo3683 Could also make one(a kiln) with some starlite material for very cheap, technically a forge but you could dial back the heat to turn it into a kiln. reference video kzbin.info/www/bejne/fJ6ok2SPj7iWrsU

[@thorodeus1]

maybe he just prints the 3d printers???

[@archiefromuno]

2/3 rockets exploded “calls himself a rocket master”

[@kerbodynamicx472]

That’s probably what happened at SpaceX too, I mean you’re dealing with the one of the most dangerous device on the planet

[@danielsteger8456]

@@kerbodynamicx472 nuclear scientists

[@Halfstep2024]

Your standard X Ray tech is in more danger daily than a rocket scientist

[@SergioPolimante]

You’re videos keep getting better. Parabéns! :)

[@jordananderson2728]

Integza: "This video does not have a happy ending." Me: *grabs popcorn* "This is what I subscribed for."

[@reagank.2268]

“Like that smash button”

[@markuscubz]

Liked for that ‘smash’ button

[@Randomperson0467]

You mean smash that like button

[@reagank.2268]

@@Randomperson0467 NO, I meant LIKE that SMASH button!

[@lewisclay4108]

Absolutely great videos. Keep them coming, good sir.

[@jimtheedcguy4313]

That rocket exhaust out of the aerospike was absolutely gorgeous!! I'm sure you got a big sense of pride when seeing too knowing something you made did what it was designed to do,mostly!

[@noahvirjee2007]

Theme suggestion: You have been working so hard to create a good pulse jet/rocket engine, why not put your knowledge and hard work to the test, make a plane powered by one! It has to be able to carry its own fuel, and have at least 30 seconds in stable flight. Along with this, another idea is to use your micro controller skills to rig it with a functional steering system. Then you can try your luck at perfectly crashing it into a tomato.

[@andredepaulagomes]

My psychologist: Mustacheless Integza is not real, he can't hurt you. Mustacheless Integza: 14:20

[@TAlexBlack]

He looks like a young Till Lindemann!

[@andredepaulagomes]

@@TAlexBlack thank, now I can't unsee that haha

[@TheJdizl]

Fantastically entertaining videos Integza! A helpful tip though - your rockets will go in a straight line if you make sure that the rocket center of thrust is forwards of the rockets center of area

[@Iamlurking504]

Also spinning stablizez it.

[@TheSADLoser]

this got me excited as a kid! thx !

[@Tomartyr]

I see Inetgza's neighbours are smart enough to have boarded the windows facing his house.

[@JoelCreates]

You can 3d print ceramic parts? And you chose to make an aerospike? That is so freakin awesome!

[@integza]

How dare you??? NO ! YOU'RE ARE AWESOME! AH! GOTTA GOOD

[@UNITYMusics]

@@integza ahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh

[@toepunch001]

Bigger aero spike needed

[@EngineEnginer]

@@integza zrub to z ceramiki lub z masy solnej

[@botondpongracz9851]

The ceramy cant withstand the high pressure

[@rainbowccreationstm8510]

Theme: create a piston that entirely runs on rocket engines

[@keybored13]

no

[@ps-uj5dm]

Yes

[@beaconblaster33]

kAN made one is Scrap Mechanic

[@BrillPappin]

So I used to make something.similar to this when I was a kid, about 30 years ago. I found that one way to get a nice even consistent burn, was to melt the potassium nitrate, and sugar mixture, and pour it into the rocket. When it cools, it's a solid. Also, I used rolled paper for the rocket body, since we didn't have 3d printers.

[@connorokeefe1229]

Two videos in two weeks? Awesome!

[@carsonclark1806]

I know right!!

[@gladosthegiant5761]

Theme: Giving all us subscribers free 3D Printers!! (He said he would do the themes that win, lol)

[@gladosthegiant5761]

Please vote for this theme, it ought to be a good one :)

[@ekhiw]

Pro gamer move

[@gladosthegiant5761]

Portal: GLaDOS says you get cake if I get 3000 likes #thecakeisalie

[@jeffcauhape6880]

A University in Hull, England is doing something interesting that you could use a 3d printer for: They are experimenting with using compressed air flowing over a rod (perpendicular) to direct the jet of air to use as dynamic controls. When the air passes over the top of the rod, boundary effects pull the air downward as it leaves the device. Downward movement of the air acts like down aileron on the wing. Passing the air under the rod has the opposite effect. You could also use the printer to experiment and make better propellers for RC aircraft. I would try to make a Prandtl style propeller for greater efficiency and reduced noise. Would be handy to have these on a quadcopter drone to reduce noise.

[@dougsteel7414]

I like the way in the sponsor bit, he says you have to actually ride a bicycle to understand it, then shows an animated astronaut...guess I'll never know 🤣

[@bearb1asting]

This dude rolls the hardest R's I've heard in an ad ever. Nice.

[@WingofTech]

Tis’ the Power of the Portuguese

[@apocadood2099]

@@WingofTech ngl I thought he was Italian

[@WingofTech]

@@apocadood2099 Understandable, the more Latin, the rollier ‘R’s I think. :3

[@purpleguy6973]

hard R's for life 😏😏

[@majvertnik322]

It would be awesome if you make an Trebuchet

[@justinbyrd2927]

The world needs more of you and people like you. With sound legal counsel, I'm certain you will find financial reward with some of these ideas of yours. Not sure how patents work in your country, but you should patent every single original design. Ceramic coating in those rocket bodies, with perhaps a metal sleeve insert, and you have a policy changing device. I speak where I should not. I am your pupil for now, and I thank you.

[@fabioESER]

Great chanel! It is amazing seeing someone combining knoweledge, entertainment and visual in one video. Theme: solar concentration mirror, Stirling engine, electric generator. 🤓😁 Greetings from Portugal! 🇵🇹

[@sourabhdebnath8925]

Yo integza, Make a rocket with tomatos inside , so if it fails atleast the tomatos will be destroyed so no loss!! Remember kids , tomatos as the most DISGUSTING guuy thing in the world.

[@aerotecrc9308]

Lol enjoy your printer mate

[@sanjeetdebnath9807]

My he so hated about a tomato leave him alone man

[@sourabhdebnath836]

Mmmmmmmmmm

[@vitansiru9198]

I want the 3d printer give me plz

[@mittinbhagu1382]

JORGEEEEEEEE

[@PlasmaChannel]

“Noooooooooo” Jorge’s motto from here on out.

[@villa1n663]

hehehe

[@muhammetfurkan6818]

I need that printer dude!

[@jurajkolesar1894]

You comment on every science video i watch lol

[@brennonthornton5348]

U should build a vehicle that runs on a HHO generator

[@_Garm_]

"Ha ha ha, Let me show you its features"

[@kwilliams420]

Glad I found your channel today! For a theme it would be awesome to add a launch escape system to your rocket. Secondary theme: tomato seeking rocket for maximum tomato destruction.

[@BimmerWon]

Try reinforcing the bottom part where the pressure builds up with metal rings. That could help prevent them from exploding if you make rockets again in the future.

[@talion9289]

You should definitely do more videos using sugar rockets. I have 2 themes: you should upscale the rocket and attach a parachute. And you should attach the smaller rockets to an RC car or plane and use them as missiles.

[@losthandle007]

Why don't you build a machine that makes surgical masks, it could be very helpful in this period! Or maybe build a vacuum machine that makes tomatoes explode, cos' tomatoes are fricking disgusting ahaha ... Tomatoes are disgusting!

[@losthandle007]

idk why but everytime i write machine my smartphone corrects it in macchin lmao also vacuum*

[@theblueguy6009]

That's a nice idea

[@NaughtyShepherd]

*Surgical Slap that phone

[@losthandle007]

@@NaughtyShepherd i Will 😂😂😂

[@losthandle007]

@Joshua Denning because they are disgusting eeeew

[@andrewsisson962]

Love your channel, your failures (what us tinkerers call "learning moments") and your great sense of comedic humor. However I have to side with your tomato overlords, they are delicious and awesome.

[@Fede_uyz]

Loved your style! So you got my sub!

[@samuelpeccoud9970]

Theme: rocket that doesn’t explode and potentially has a parachute.

[@zacharymetz9975]

Next theme should be a magnetic rail gun, would be really cool

[@zacharymetz9975]

@Degrasword call it an orbital payload delivery system test

[@MisterHolaMan]

good job that was a beautiful launch

[@windsongdj]

Great video keep up the good work

[@ColdWindPhoenix84]

That was an amazing aerospike engine, I would love to see more of them.

[@daroniussubdeviant3869]

very impressive exhaust plume geometry.

[@q.e.d.9112]

Yeah, me too.

[@deltab9768]

Yeah, the flow went exactly where it was supposed to. I was impressed. I think the failure may have been due to the solids in the exhaust stream blocking the "throat" (ring in the case of the spike?) and changing the constriction. I could easily be wrong though, I'm no rocket scientist...

[@q.e.d.9112]

@@deltab9768 My daughter in law is. She did her PhD on some esoteric aspect of rocketry, but she worked, initially on wind power turbine design and now she’s employed in fusion research. Formidably smart young woman and super mum. I don’t know how she does it.

[@peterme]

Theme: DIY kiln, seriously I just want to see more of this ceramics printing!

[@mokrushynoleg2755]

Good luck Boy, very soon your channel gona be veeery big.

[@DarrenMansour]

I'm very glad I found your channel. Your videos are very entertaining

[@joflo5950]

Project Idea: GROW YOUR MUSTACHE BACK! It looks great, never shave it off again!

[@jasonsummit1885]

Or grow a Tesla moustache😁

[@NICEFINENEWROBOT]

@@jasonsummit1885 But he is not an imitator! And Tesla never was! So - to be like Tesla, never be like Tesla!

[@angeltysonswe]

Found your channel today. I love it! Keep em coming!

[@A1OFFENDER]

Loved the video

[@CommHawk]

Why don't you build a kiln? You could use those white bricks they use in forges. Add a temperature monitor and an arduino... bob's your uncle you have a controllable kiln!

[@CommHawk]

I suppose buying a replacement or getting one second hand is more practical, but isn't the point of the channel to be creative and do things your own way?

[@lastninja4661]

How sexy

[@CommHawk]

@@johngoldberg8949 It's less about reinventing the wheel and more about being able to do something for yourself. I'd be more interested in watching a video where he makes the rocket, the propellant, and the nozzle rather than just buying an optimized setup and showing it off. It all comes down to personal preference but I was drawn to this channel because of it's creativity and willingness to fail.

[@CommHawk]

If his 3d printer broke I would want him to fix it in a quirky and interesting way too. I have nothing against store bought but making something cool simply because he can is just what I've come to expect from him. Someday everything breaks; if you can, I believe you should fix it.

[@daboss1228]

Man, your vids are the best!!!

[@nomekop777]

Nice first downrange test for the Integza Space Program!

[@imanalfarizi6214]

Theme: make a full-flow staged combustion engine. Beat that Elon's raptors!

[@_bluespider5470]

Man i'ld like to see shit you can do with hydrogen, modifying an rc ice to convert it to HHO, or just build an electrolytic separator and make a torch or even a hydrogen pulsejet (yes crazy and risky idea, but I've never seen it done), if there's one man for the job it's you 😉

[@julesherard6102]

Man that a fuckin great idea I hope you'll win a printer

[@memyself8614]

@@julesherard6102 duh hydrogen is lit and so is integza, great match I think he can build great stuff with it. I remember this is how I discovered Grant Thompson (may he rest in peace now 🙏🏼)

[@zagnut48219]

This is the best KiwiCo advertising I've seen Integza. Well done!

[@GioVader]

Hey Integza, I love your videos. I think recreating a mini electric car that uses solar panels to charge as it goes would be a fun video topic.

[@J-Stoic]

Why am i only just finding this channel i could have been watching all of lockdown had i known!

[@you_just]

"I still have a lot to learn when it comes to rockets. Especially in terms of safety." integza's neighbors, currently ordering rocket-proof umbrellas: you can say that again

[@derchesten]

Portuguese intelligence noticing a sharp increase in rocket proof umbrellas in the area: "ladies and gentlemen, we got him"

[@anshuln.2374]

Try making a 3d printed gasoline engine for your next video. And never ever shave again!😂 If I get 1k likes Integza has to eat a tomato. ⬇️

[@strykegaming5692]

Looking forward to it 😂

[@calebconneely485]

Not funny Didn’t laugh

[@guyg4801]

What? You don’t want to see him eat a tomato?!?

[@guyg4801]

Y’all better like this comment

[@anshuln.2374]

Remember last time he said he’d eat a tomato he didn’t

[@stefanocanonica519]

That ceramic resin is awesome

[@ajyku5]

Your are great and very simply explain tough works with nice story and entertainment. Keep it up.

[@theblueguy6009]

Amazing Video!!! imagine you are Integza's neighbor and one day a rocket falls on your head... and the next day the same thing happens lmao. You have a rocket now, why don't you build a moon rover? So you can use solar panel too. Not a real one, but a little space roover with arduino stuff

[@theblueguy6009]

imagine you are Integza's neighbor and one day a rocket falls on your head... and the next day the same thing happens lmao

[@redissus9080]

jajajajajajaja his neighbors hate him 😆😆😆😂 🤣😂 🤣😝

[@theJeet8]

I really appreciate seeing the various steps in engineering here. Many other videos talk about start, making, and end results, but you go through all the failures as well!

[@agbeats1687]

I love how you could hear the" oh well " in your head at the end 😂😂

[@cybertrollka]

Crazy in a good way

[@tcam52]

The sentence “speaking of useless children, here’s today’s sponsor” is my favorite and I’m gonna use it all the time

[@MrKrabs-fg8ui]

Kill the child, boil him, mash him, stick him in a stew

[@johnuthus]

"These are gonna blow up" rocket: how bout no

[@cchoon84]

Great job to turn what inside the brain in reality and share among the worlds!

[@colbydauphinais9240]

I hope you all are doing good and enjoying the holidays! I think making a 3D printed Plane (maybe using a jet engine?). Love watching your videos and have an amazing day

[@mrnice4434]

No man ever shaved his mustache without going Hitler for a few sec.

[@BowfortheMad]

bump

[@Noridin]

I was beginning to think I was the only one who noticed 😂

[@akakigvelesiani333]

Theme: try to build a tool, which can accurately measure thrust of an engine. If you add a logging function to it maybe with a microcontroller, it'll be even better.

[@09ddtt]

load cell + ADC + any microcontroller (arduino has some cool variable X time graphing functions for data logging)

[@spread254]

maybe but microcontroller will be that good?

[@akakigvelesiani333]

@@spread254 yes

[@spread254]

@@akakigvelesiani333 yleo

[@JoshGDS]

I learned a lot in this channel

[@oussamadhouibi]

You are a great creator with special rare humour! A great project with the new tools you got I think would be the tesla thermo magnetic motor!

[@MisterIkkus]

Theme: It would be really cool if you explored the challenges of flying a helicopter on Mars, like the Ingenuity will be doing next year. You could use a vacuum chamber to simulate Mars's thin atmosphere and 3D print a whole bunch of helicopter parts. I think it's within the scope of stuff you do!

[@joaotomas8906]

[Video Idea] Make a skateboard or bike powered by rockets :)

[@joaotomas8906]

@@czrptr6849 🙏🙏🙏

[@JoaoRodrigues-kv9lu]

dps emprestas

[@joaotomas8906]

@@JoaoRodrigues-kv9lu empresto mm

[@joaoreis1131]

*Skateboard goes skkr*

[@afonsotavares4305]

I want to see it!

[@irziq858]

At the beginning of the video: "This video doesn't have happy ending" The fact: Funniest part ever wkwk

[@SKuz-ke4kz]

Keep up the sweet videos 🔥🙏 I would like to see you make the best 3d printed spud gun or canon of all time.

[@MrGian91]

if you can make a working cylindrical tesla valve you have to absolutely try it as a nozzle for these rockets! in a video from Nighthawk called Tesla Valve Explained With Fire it looks like the flow actually accelerates!

[@bencarter96]

The more I see the more I like. He has the Furze esque level of insanity.

[@TheCDelX]

If you enjoy the more insane Levels of Science like Colin Furze and Integza, you might like Evan Kale. Watch at your own risk.

[@bencarter96]

@@TheCDelX I just like people who are clearly passionate about what they do. A lot of bigger KZbinrs you can see it's just them 'doing there job' the passion dies

[@TheNamesBettyNyahhh]

Good stuff !!

[@JohnBoudouris]

I want a new project based on this, bigger, explosive, cooler, longer. Rockets are so cool!

[@EstBest69]

Theme: A vortex cooled rocket engine