AFS: Kronotex Herringbone Laminate Installation

Discover a new elegance with Kronotex HERRINGBONE laminate distributed by Australian Flooring Supplies. A Kronotex HERRINGBONE floor is strong, beautiful and importantly - easy to install. Watch our instructional HERRINGBONE Installation video to guide you through your first KRONOTEX HERRINGBONE install.

[@brumboru]

I only put one triangle at my front door then worked back down my hallway and into my living room, no problem and it’s easy to clip together…

[@content-mu8bo]

I like the method to set all triangular(s) started from one wall. What happen if got a sliding wall line? Often it happened in old build. Where and how the adjustment should be made before carrying on the rest repeating effort? Thank in advance for advice

[@Meeeeeeeeeeeeeeee_14]

Is this kronoswiss herringbone? I know somebody who's kronoswiss herringbone clicks when they walk on it, apparently the concrete floor underneath wasn't latexed/levelled beforehand? Would you recommend always levelling the subfloor first? And what underlay would you recommend? The back of the box says atleast 1.5mm which is what they used, a 1.5mm foam DPM underlay, also the instructions on the kronoswiss shows to glue the edges of the planks aswell?

[@julialloyd5626]

Hi! Why is your offset line is exactly 94mm? Thank you

[@jocrpnter]

Did anyone notice that the floor was not centered? Ya gotta offset the first triangle half the width of a plank.

[@kalmarattila]

Can I do this with any laminate what not have A and B?

[@tamarpagan3584]

Where can I buy that specific flooring

[@ledanglove]

Great video! Just a question: in which case we need to use glue as I've seen in several herringbone flooring videos?

[@themrmaiorca]

Laminate flooring is a floating floor, it has locking systems and no connection to the subfloor. Do yo mean parquet flooring? Parquet is usually glued down on to the base with a urethane based glue.

[@TheSands83]

That’s guys doing lvp it’s a glue down product

[@js0000355]

You use it on the end and sometimes with the starting triangles. Depends if the click mechanism works good. On the finishing end of the floor you could have a very small piece of flooring so you have to glue that to keep it in place. Click mechanism is too short to fit tight on such short piece. Hope I explained it clear enough, English is not my native language

[@tamhonsaodong]

I love your layout it will work the same with laying tile right?

[@vuwaninepfumembe8993]

Hi I want to tile the floor with the ceramic tiles 200* 600mm using the herringbone design. The problem is the opposite walls are not straight they have a C-shape or in a form of brackets ( ). The gaps from the the walls are so great. Please help me out. Thank you

[@omerfar]

where the Glue was used ???

[@lilyannal5159]

"Mark out the offset" what is that mean... 2", 5"... from where? Please explain the step for non-pro. Thanks

[@Roberts-CoveTrimmerAustralia]

Hi there, see the video at about 1 minute. Draw your centre line & the offset line is 94mm away from that. If you need anymore help please contact us on [e-mail]

[@khanmehdi2]

Excellent work 👍

[@yourlotusflower4414]

What if the walls aren’t straight?

[@AliJaw2d94]

Hello sir .. i have a concrete floor is it ok to install with just cement or adhesive or i need to but something above the floor before the installation BTW im speaking about the second floor of my house

[@onthedry8386]

why the music..trying to concentrate on video its a great help but for the racket

[@Roberts-CoveTrimmerAustralia]

Awesome that you've found it useful! You can mute the video to avoid the music :)

[@justinzamm]

What is the colour used for this floor? Is there like a colour code or something I can look for?

[@Roberts-CoveTrimmerAustralia]

Hi Justin, it is Treviso Oak (D4764) www.kronotex-aust.com.au/treviso-oak.html

[@jayveevargas7968]

What’s the size of the tiles?

[@Sele81]

How can we buy this floor in Turkey?

[@syrona1]

Should the triangle be even?

[@4sizo]

When it measures 133mm for the starting triangle, should it actually be 113cm? 133cm is too far across

[@603POV]

What is the width of the board used in this video?

[@DanielBridges666]

I'm doing a kitchen/dining room, with bay window, fireplace, not one straight wall to follow this guide

[@raindeer65]

Hi I've just bought the exact same laminate. I have a fireplace so which way should the flooring lay as I'm not sure??

[@lauracovx]

Do you find it’s creaky? Mine just got laid today and it’s so bad

[@cspray5386]

​@lauracovx Is it laminate, hybrid laminate or LVP. ? And does it continue creaking

[@Joyjoiner]

Approximately what is the waste % please

[@tonydedivanaj8954]

20%

[@msshoepergirl]

Hi, may i know if the shades of A & B are different?

[@Roberts-CoveTrimmerAustralia]

Hi there, the A & B refers to the locking system only. Every install requires both the A & B of one colour for the click system.

[@joseyg9167]

You have made an error, the B and A wrong way round

[@js0000355]

Totally agree. Maybe the shot was in selfie mode, so flipped horizontal? Edit Not flipped, his watch is still on his left wrist. So definitely wrong!

[@eugenemeyler7250]

looks like a very square room

[@nurgul6045]

Which color is it?

[@Roberts-CoveTrimmerAustralia]

Hi there, it is Treviso Oak (D4764) www.kronotex-aust.com.au/treviso-oak.html

[@YourHomeTorontoRealEstate]

This is really my favourite Channel! Thanks for your nice Videos, it is very enlightening, Waiting for your latest update. Drumsnab Parkette

[@tamhonsaodong]

Amazing video great job thanks 😍

[@elielcarlospq]

Parabéns pleo trabalho muito bom, Brasil.

[@mannymelendez7511]

Do you have to have an equal amount of A cases with b cases

[@lauracovx]

I just bought this floor and it’s super creaky and squeaky? Like everywhere. The whole thing is creaky. Does anyone else have this problem? I feel like it’s where one end doesn’t “lock” into place which means there’s movement there. Pls let me know if anyone else has this issue?

[@anca28]

Yes, me too, also the corners started to rise 😢

[@Go2Dragon]

this is misleading, the first 3 triangle will end up with cutting the length of each piece of laminate floor.

[@aftab7678]

very good

[@juanjuan9079]

How much for feet

[@Roberts-CoveTrimmerAustralia]

Hi there - you can use a conversion like...www.google.com/search?q=mm+to+feet+conversion&rlz=1C1GCEU_enAU893AU893&oq=mm+to+feet+conversion&aqs=chrome..69i57j6j0l4.4493j0j7&sourceid=chrome&ie=UTF-8

[@mlandeligatyeni4673]

thanks lots sir

[@utunlin5699]

Nice

[@Mo-jm2gv]

How much to fit this laminate??

[@bombonblancoramirez9404]

🏆🏆🏆🏆

[@Schn286]

Супер🎉 класс

[@hasanmostafa3407]

100%👍✍😘

[@sterilebacteria]

I’ve had kronotex for a few months now, avoid if you can, the amount of chips at the edges is ridiculous, not suitable for home flooring

[@sikhumbuzonzama7989]

Hi

[@ianw5290]

Yea cos every room is this square 🙄

[@cjspaul9900]

For the layman thinking they can do it themselves then call up a pro, oh could you finish our flooring, we started to lay it but haven't time to finish it 🤣.. you mean u can't do the hard bits.

[@jeff-ew7np]

Also looks of center tot me

[@sennameijers]

Installed this floor today and found it very easy to instal, you just need to get in the feeling and you’re done before dinner.

[@orxanseferov6192]

Kafası baya işlek kafa

[@kitt6152]

That music 😖😖😖😖

[@Bedge353]

Hi! I’ve sent you an email

[@Roberts-CoveTrimmerAustralia]

Hi Ben, I can't find your email - can you please forward it to [e-mail]

[@ОлегДубровский-ч1ц]

Неправильное видео! Нифига он так легко не собирается, у него с 4 сторон замки

[@marioconstrucoes2270]

Znsn

[@AmadeuTayarol-gb8cg]

LIKE COPIANDO

[@hippovrhino]

Keep picking up boxes of wood like that and your flooring days are numbered 👨‍🦼👩‍🦼🧑‍🦼