Agilite K19 Plate Carrier- Full Review

www.buymeacoff...

[@seenred6969]

Great review!!! On the fence...... at least I was until your review. What mag pouches and what attachment points are they using. I noticed they are available in several configurations. Definitely considering the assault pack. Thanks, definitely gained a sub!!

[@Gruntreviews]

These are the g code scorpion softshell mag pouches. They have a pistol and rifle version. I ordered the R1 molle clips with them and they work well. I'll have a review on those and the HSGI tacos up soon.

[@seenred6969]

@@Gruntreviews thank you very much for the reply. I’m looking forward to your review

[@M447DT]

@@Gruntreviews how big is the front pocket? can you fit anything big in it? like glock mags??

[@Gruntreviews]

@@M447DT maybe a micro. More admin pouch than holster pocket.

[@airborneivan]

Looks like a really nice PC. For the bunching issue on steel plate, adding trauma pads behind them will probably help reduce the bunching if not completely eliminate it.

[@Gruntreviews]

I'd say it would have to be some thick pads. They definitely designed these around lvl 4 plates.

[@ndalby187]

Probably completely eliminates it with a spall sleeve.

[@harbinger8208]

I bought one of these carrier with ShotStop plates. It works great and I love it.

[@Gruntreviews]

Always good to hear folks are investing in protection. How are you liking those plates? I haven't handled a set yet.

[@WehrmachtBunny]

If using steel plates, usually you're going to want trauma pads. With trauma pads + the plates, it fits pretty snug. But Agilite mainly designed the K-5 and the K-19 for ceramic+poly plates.

[@Gruntreviews]

Agreed, they definitely targeted the level 4 plate thickness.

[@WehrmachtBunny]

@@Gruntreviews Yup, I think agilite mainly focused their production around the IDF(Isreal Defense Force), which is predominantly fighting against rifle calibers. Also, I don't know anyone in modern times that uses steel plates anymore due to spawling. Also, RMA rocks, I have those in my K-5 plate carrier. Would upgrade to a K-19 but the wear and tear on quick release mechanism makes me iffy on upgrading. Don't want those plastic parts to break.

[@Gruntreviews]

@@WehrmachtBunny at some point I'll set some funds aside to get one to test. Ballistic gel arrived saturday.

[@mindcreator7663]

Polyethylene is the best for sure

[@michaelbattin6717]

thank you for the review, you touched on my biggest concern " shoulder pocket" I may pass just for that reason. I like many functions about this carrier. Darn! I wish I had a place to try on and should my weapon.

[@Gruntreviews]

It's still incredibly functional. The trade off to solid padding is the smaller shoulder pocket. You might check out the shellback banshee 3

[@kevund16]

“If you like breathing just like the most of us do” 😂

[@Gruntreviews]

I find its slightly important.

[@BloodEagleTactical]

Can you do an adjustment setup video? Love the carrier, just having an issue with the fitting adjustments. Thank you

[@Gruntreviews]

What are you running into?

[@BloodEagleTactical]

@@Gruntreviews i meant like adjusting the shoulders etc

[@Gruntreviews]

It's all velcro. If you want to message me on Facebook, I can walk you through it.

[@Adam-xt4jh]

I got a k19 and you can buy a velcro pad and buckles that attach to the molle for a placard

[@Gruntreviews]

I know they can be added, they just don't have a factory addon placard per se.

[@WiiR3d0000]

What company did you use for this? I ordered an AXL JPC adapter kit because they seem to be the same type of carrier. 6 columns of molle and about the same size height wise.

[@siddunn4033]

@@WiiR3d0000 Agilite makes this carrier homie it’s like 300$

[@WiiR3d0000]

@@siddunn4033 I know, I own one. I'm asking what hook and loop field did he use to attach a placard because it only comes with 6 columns molle webbing.

[@Adam-xt4jh]

@@WiiR3d0000 sorry I’m just seeing this! I ordered the AXL with the 1” spacing, hope I got the right one. I’ve been waiting forever it seams like on mine, with how messed up mailing and wait times are!😭😭

[@spoke1183]

To fix thinner steel plate fit issues, get a guard dog anti spall and trauma pad sleeve. They weight nothing and u get few layers of Kevlar material for spall and a trauma pad in one package.

[@Gruntreviews]

That's good info. I wouldn't run steel myself, but it's good info to pass along to folks.

[@spoke1183]

@@Gruntreviews Np i have a same plate carrier and had exact same issues with rts tactical ar600 steel plates with basic coating option. I was looking around to add more spall protection and found out about guard dog sleeve. Absolutely amazing product for steel plates of any brand and will fit most as well without issues.

[@kevinking9783]

As of September 2023, Agilite ships out of Traverse City, Michigan

[@Gruntreviews]

Indeed. They put in a US distribution hub in several months after the video.

[@PrayingPanda]

From the Philippines??

[@rickypickles2219]

i got a k19 with some lvl 4 highcom 4s16s...gunna add a 3a soft backer as well. super excited I hope its comfortable and works well. Ive heard good things

[@Gruntreviews]

It's been quite comfortable for me.

[@zerillisguren7720]

The only thing I don't like is that for me the side plate pouches seem to flop around. Have the cummerbund tighter than usual on it.

[@Gruntreviews]

I'd agree. Would've been nice if they designed the side pouches to fit inside instead of outside the cummerbund.

[@jakobkiehne596]

I just need to point out that you are concerned with a 1 inch thick bound piece of webbing as a snag hazard, yet you have 3 carabiner hanging off the vest.

[@Gruntreviews]

I generally only keep 1 on there. The other two normally go in my bag.

[@zerofire3172]

So far the lbt 6094/lbx version and the cry jpc (possibly the quore performance pc) have the best shoulderability

[@Gruntreviews]

It's all a game of trade offs. Some of it is the camera angle.

[@zerofire3172]

Have to stand sideways to shoulder the rifle (his case shotgun) is a no go

[@Gruntreviews]

part of that is the camera angle

[@riaanbooysen6934]

Getting mine soon in South Africa

[@Gruntreviews]

Let us know how you like it

[@johndoe-sf6hk]

I wonder if when using a 10x12 plate that is sub 1inch thick if adding a trauma pad/cushion behind it would help take up the slack?

[@Gruntreviews]

I'd imagine that would work. Or shove some soft armor behind it.

[@seanmelvin5115]

Hello all, I have an Agilite K19 that I need some custom modifications done on. Would anyone know someone that would specialize in this type of work? Thanks for the help.

[@zerofire3172]

A new carrier would be cheaper and faster. Sent my placard adapter to egl 15 weeks ago and still havent got it back. Custom is time consuming and expensive. My lbt carrier cost 500 dollars. Retrofitting tubes cost an addittional 400 dollars. Could have just bought a shaw concepts arc for 400 and saved 500 bucks. After your custom work is done your gonna find something that actually meets all your needs without retro fitting or custom work

[@seanmelvin5115]

@@zerofire3172 can I get the name of the people doing your plate carrier work?

[@Gruntreviews]

what are you needing done?

[@Krymoff]

the price of Freedom is constant alertness and willingness to fight back. many people joining territorial defense forces of Ukraine without any basic protective gear and body armor and as a patriots they're fighting for freedom even being shot is anyone here willing to help with SAPI plates level 4 to protect Ukrainian people's lives?

[@Gruntreviews]

I believe HHV has been sending items.

[@charleskhenry]

What kind of tactical shirt are you wearing?

[@Gruntreviews]

Crye g4

[@lamontemoses2069]

11x14 ?? Plates will it fit

[@Gruntreviews]

They would be tight. The 1192s in the video are 9.5x12.5.

[@lamontemoses2069]

@@Gruntreviews I appreciate your quick response . Do you think if I pre-wet the carrier it wouldn't be so stiff when inserting the my plate . I'm a tall guy. Trying avoid another injury to myself. Thanks again.

[@Gruntreviews]

There's room in the plate bag vertically to move. Width would be my concern.

[@Rudizel]

How does this compare to the Banshee 3.0?

[@Gruntreviews]

I may have to do a side by side review, ive got both. The k19 is a bit more minimalist, the banshee has just a bit more substance. I like the buckles better on the k19. The banshee is my preferred carrier, I have a review up on it.

[@Rudizel]

@@Gruntreviews Just picked up the K19, loving it so far. Def on the minimalist side of things but well built and lot's of features. Also very light.

[@Gruntreviews]

@@Rudizel it's definitely laid out well

[@irepsatown]

What are the dimensions?

[@Gruntreviews]

Of the plate bags? Or is there a specific dimension you're looking for? I can pull it out and measure.

[@irepsatown]

@@Gruntreviews the plate bags. I'm a small dude so I'm trying to see if it'll fit me

[@Gruntreviews]

13.5" x12"

[@MaxwellArms]

Do you know if someone with 47 inch chest will fit in it ?

[@Gruntreviews]

I can't confirm, but there's a ton of adjustment in the cummerbund and shoulder straps. I'm 6ft and 195ish lbs if that helps.

[@MaxwellArms]

@@Gruntreviews ok thanks

[@Gruntreviews]

My pleasure

[@daven953]

It will, I have a 50 inch chest.

[@imchenzz]

Does this have an nsn number on it?

[@Gruntreviews]

To my knowledge, no.

[@imchenzz]

@@Gruntreviews thank you for the quick response, great review!

[@Gruntreviews]

Thank you for the kind words. I've got a shellback carrier review going up tomorrow. I'd have to check, but I believe they have a gsa contract.

[@s1vrbck_fitness]

Is this K19 the version 1 or verison 2?

[@Gruntreviews]

Version 1. I have not gotten my hands on version 2, but I believe the only major change is the addition of velcro to mount a placard.

[@s1vrbck_fitness]

@@Gruntreviews I think they pushed the shoulder quick releases further back? I will find out when my version 2 arrives in a couple of weeks.

[@Gruntreviews]

@@s1vrbck_fitness let me know, I'm definitely curious.

[@s1vrbck_fitness]

@@Gruntreviews Ok, version 2 still not the best stock weld. Agilite just posted a video showing a permant strap like a YIB-YAB. So, they are working on it. kzbin.info/www/bejne/i6DCd3mQdrKLrtU