Next Level Plate Carrier Placard EXPLAINED! | Pincer Placard 2nd Layer Admin

[@charlesbuckallew8009]

Did anyone else REALLY enjoy the clip of them testing the mag going in and out of the mag pouch?

[@novemberdayrise8971]

bro it was so goofy 😭

[@Xanuri]

I was turned on for sure 🤣

[@Erstflug_A308]

Hahahha😂 yess

[@tmcg3088]

Naturally

[@Agilitetactical]

😉

[@austinmorgan7693]

Proud T&E member. May not get prototypes but it’s encouraging to see a company reach out to almost everyone asking for comments. I’d love to see the pincer be able to support PCC in 9mm etc… Stay Safe!

[@sas21773]

I am also a T&E member and love providing input even if I don’t win anything

[@Agilitetactical]

Thanks for the support and for being a part of the team🦂

[@kita1318]

I wish I could join the T&E program but a few months too young which sucks

[@Minuteman4Jesus]

@@Agilitetactical Great gear, but will you add Alpine Multicam to your products? I operate so far north I'm rubbing shoulders with my Canuck bros!

[@catshultz9045]

Same

[@1gmika]

2:03 Tactical "ibuprofene for that time of the month" is so underrated :D

[@MarkHardingRNCO]

I must admit it is great being a member of the T&E team and being able to give input on developing new kit that really makes a difference in the real world for those who need it most. Thanks Agilite for having me on the team.

[@randallburns9735]

Proud T&E member. Very happy that they listened to the gun community as a whole no matter our background. I want to see a308 dmr set up. Keep up the fantastic work Agilite l.

[@Agilitetactical]

Thanks for the support and for being a part of the team🦂🦂

[@GavinKrech-ik3rb]

Proud T&E member here as well. This company has went to great lengths to put out the best products and I’m glad to be apart of it. I’d like to see the next round produced for 7.62.

[@2610mrc]

לצערי לא יודע על מה להמליץ 🤦🏻‍♂️ אבל אשמח לזכות עבור הבן שלי שמשרת באחת הסיירות

[@shaneanding300]

Love being a part of this T&E Team and part of Agilite. They are always ahead of the curve when it comes to new product development, quality, and overall toughness of their products. I would love to see the next Pincer Single Pistol Pouches made to fit .45ACP/10mm.

[@MSPD62]

Grateful to be apart of the T&E program. Seeing the products come to full fruition after providing input is great. I think either an MP5 style setup or 7.62 would be a nice compliment to selection.

[@DaDuddaMan]

As someone who uses the pincer mags and use them on SRT, it would be great if you guys made it for 9mm MP5 magazines. A lot of guys use them for entry, or at least some sort of pistol caliber carbine. I have no doubt you guys will, you are the only company who really listens to your gear testers and community.

[@tyburrows7090]

Great point. My CZ Skorpion Evo would benefit greatly from this idea

[@nicolasreyes4822]

Im very glad of being part of T&E team! Ill like it to see this placard with a configuration for Jericho pistol or work with 9mm. Greetings from Chile 🇨🇱🇨🇱

[@j.l7661]

Amazing product! Love that this is like an alternative to chest rigs. Would be nice to see a variation that hold 7.62x51 mags!

[@bigsigar1]

Great product- glad to be a part of the T&E team. Well thought out, practical, and comfortable gear.

[@tykelly446]

Absolutely loving the build quality, it would be awesome to see a future versions with mag pouch’s designed for 6.5 or .308

[@cpt.kermit5552]

This is why i LOVE Agilite. Slim, durable, useable and light, just what you want, high mobility but still the ability to bring what you need. Big up! Pouches for SMG mags such as the MP5 and MP7 would be really cool!

[@monachusbellator]

Well thought out product. Would love to see this with capacity for 7.62 or 308 mags. Agilite is killing it, keep it up!

[@DeadXPandaLP]

Thanks for being part of you. I just like it is... It would fit perfectly on my load out. Stay strong

[@terd_nugget4613]

The pincer placard would be perfect for your recce/scouts who run a bigger battle rifle. I would love to see them come out with a 7.62x51/.308 variant that could fit ar-10, Scar, or even Fal mags

[@Minuteman4Jesus]

Oh yes!!! I really need that for my AR10. Also looking for an alpine multicam option.

[@fallout_nv6]

Happy to be a part of T&E I think a pincer pouch in 762/308 when would be great.

[@ChrisOldham-df7kv]

I love the idea of the placard/admin combination. Would recommend looking into making the triple mag section able to accept multiple calibers with minimum adjustment for those who must change ammunition loadout for various roles they fill. Love your products, look forward to the next innovation.

[@caveman03xx]

As someone who helped work get this out, I love the fact that you guys listen to your T&E teams' suggestions. You guys have knocked it out of the park again. That being said, I'd love to see either a 7.62x39 or PCC variant. Something that could hold say 3 AK mags or 6 MP5 or similar mags would be awesome!

[@edi2388]

Hi congratulations it is a fantastic design. Well I would like the variant to be on the sides for 45 acp and in the center there would be all options from 7.62 x 39 to 300 win mag semiautomatic. All the best : )❤🎉😊

[@Z3PO96]

Looks phenomenally crafted and thought out! I'd really enjoy seeing the Pincer Placard in a 7.62x39 configuration. Keep on keeping on!

[@outlaw-nazca5759]

I'm too new to the T&E to have given input for this product, but I'm amazed at how often you guys ask us for input. Glad to be a part of this! Also, a PCC/SMG Placard would be fantastic. Next gun purchase is a Palmetto AKV. Or a shotgun placard. Or some placard that works with .45-70.

[@ALEPHHAMDENSON]

Earlobes?! ... Small toes?! ... Seriously?! Anyways, nice 5 mins post guys! I love the music in the background. Very soothing after a hard days work "down-range". Good job! More like this please!

[@darienr-s993]

Glad I helped with the making of this, I would love to see a 7.62 variant or one that's made for smg's like the ump45 ect.

[@fredfernando6581]

Proud T&E guy here as well. Using it for the famous AUG mags and looking forward to fitting coms or even more gucci-style gadgets to the second layer. Keep the good stuff coming! Cheers from Austria, over and out

[@nomadicbarbarian]

So happy to be able to contribute through the T&E (Team 4) program for the last 3 years. From the 6 pack, k-0 to this admin pouch and the amazing pincer single mag/multi tool pouch! Its been an honor to assist. The fact that you guys listen to us T&E members is amazing lets keep it going! Pincer pouch in 7.62 would be great Btw way Gill I still havent found my multi tool yet 🥂 and with the rain and snow storms California just had i doubt i ever will.

[@1gmika]

The next thing I would love to see is an dedicated pincer for SMG (MP5, scorpion etc.. !!) Can't wait to see that beast !

[@TK10100]

Proud T&E member. May not get prototypes but it’s encouraging to see a company reach out to almost everyone asking for comments. I’d love to see the Pincer Placard 2nd Layer Admin to Multicam Black :) .

[@italianchopper83]

Proud T&E member,when a company like Agilite ask for suggestions and feedbacks it means they really care making a product to be used among different kind of users according to what their actually needs are!would love to see the new pincer being able to hold 7.62 Mags

[@killersodas7695]

The admin pouch looks great love the Velcro on the front too. I would really like to see the placard in a 7.62x39 and 9x19 also would be interested in having the pincer placard without the 2nd layer admin pouch but with the 2 9x19 attached to the sides of the placard

[@jonass.7923]

Yessssss!!! Thats Agilite, nice Job, good second Pouch for us. Thanks Agilite Team 🤙

[@gunsbuns3532]

Happy to be apart of the T&E group! Thanks for reaching out guys. I could always use a rifle/ shotgun placard or just a shotgun placard for quick swap outs Mission depending.

[@seanmatthews5448]

Love the second layer design and functionality. Agilite continues to impress with innovative products and takes the comments and recommendations form their customers into consideration. I’d love to see a Pincer Placard in 7.62, and another for a MP7. Would love to see pistol mag pouches for a single stack 1911. Keep up the good work! 🦂

[@tonyhentschel2433]

Proud new T&E Member here. This Placard seems awesome! Slick and intelligent design, easy to use and adapt. Would like to see variatons for either 10 rd 5.56 Mags, Shotgun shells or other single loading Cardridges.

[@stephenbaumeister916]

I really love the setup you have. Having the front pouch looks really convenient.

[@E.J.Sorrels]

T&E member here, great addition to the Agilite Portfolio. Making 7.62 Caliber would be a good option, or designing it from a Tac med stand point for the placard itself to have a couple tourniquet pouches for additional tourniquets without having to put on addition molle or velcro pouches. Thanks for all you do!

[@geirterjesen2616]

Agilite’s gear is stellar👍 And their after purchase service absolutely perfect. I’m so happy with them👍👍👍

[@crowbag9978]

The Agilite Team absolutely do the best customer engagement of any tactical company I’ve ever seen. Being in the T&E team is genuinely fun. For future development, I’d be interested in a fold out map system with hook and loop on the inside to add your own organisers

[@vitalykuper]

The versatility of the product is definitely the best on the market. I always remember myself back in 2001-2002 struggling to arrange my plate carrier per mission, you just nailed it. The magazine option of four long 9X19 for paramilitary organisations that use “dressed” pistols might be attractive for a local private sector. There are also units that still utilise the micro UZI. So using the same personal plate carrier with easy swapping solution for different ammunition… needed that during my service.

[@HessGunWerksLLC]

Agilite dominating the field one item at a time with our help !! I continue to say it but you CAN NOT beat this company’s drive, motivation, passion, dedication, to the operator and end user of their product!! Care and quality going into every single detail with respect and precision. I was big on Ferro and a few others for comfort and build quality and use but them days are in the wind !!! Haven’t won any of these giveaways yet and good luck to you all !! I’ll stick to my Multicam or M81 for second place lol

[@nkarkats01]

Very proud to be part of the T&E for a company so focused on providing quality, practical gear for actual field work. I would love to see this product produced for various calibers (7.62 Nato) or made so that one unit can adapt to several calibers.

[@danielowens9934]

Do a placard for us aviation guys, 15T here! Love my agilite gear! Went on a 5 mile run and climbed a mountain with mine today. So comfortable, no issues I love it.

[@Kawaipuilani5]

You guys just keep coming out with great gear, glad I can be apart of the testing team! I would like to see .308 or even .338 size mag pouches. Continue to do great things!

[@xHTPxMARINE]

Happy to be a part of the T&E program and I would love to see a placard designed for the 5.45x39 and 5.56x45 AK magazines as these are what I run the most!

[@kristjankalbri2223]

First of all i am happy to be part of T&E family.I would love to see it 9mm pistol pouches and 7.62*51. Keep up the great work !!!

[@sethlopez8805]

Can't wait to try this placard. I've thoroughly enjoyed every product I tested so far. I would love to see a 7.62/.308 option. Looking forward to what y'all do next.

[@IksDeeeeeeeeeee]

Glad to be apart of T&E team! I would like to see the next pincer placard for 7,62x51mm round.

[@desert2fox]

Fantastic addition to the Agilite product range. I would like to see a combination setup Pincer Placard for law enforcement that only need 2 5.56 mags but then either a flashlight or pistol mag. Keep up the great work guys!

[@beligrom210]

So happy to be a part of T&E Team . I'd woud love to see the Pincer Placard in a 7.62

[@kwita25]

It's fantastic to be part of the T&E team. I am proud of it, even more so seeing in your latest product, 2nd Layer Admin pouch, the comments I made in the survey. I believe I will have the opportunity to test your products as part of the T&E team someday. I propose to create the Pincer Placard for 7.62 mags.

[@JAKOB30]

Outstanding product, very innovative. I can’t wait to try the product out. CZ scorpion magazine compatibility would be very cool to see . Thanks Agilite, and those that are in the field. Be brave, stay violent and always smile.

[@deadpool3040]

You guys keep making great products I personally use your guys gear keep up the good work

[@kevinwilson6985]

Proud TE member here as well gellas, keep up the great work! Id like to see some more variations in the future to include 40mm, flash, etc.

[@NCM_Productions]

Being part of the T&E Team of Agilite is awesome, love their products and their team! I want to see the next Pincer Single Pistol Pouches made to fit .45ACP/10mm.

[@robertmoore8395]

Its good to see a company reach out for feedback from a big group of testers I enjoy being a part of it,would like to see one in 7.62x51

[@erichill4060]

The design is prefect for my setup. I honestly don't have any suggestions for improvement. Keep pumping out great equipment!

[@Fors139]

So at first I was like eh, it’s aight. After watching the video and seeing how relatively lowpro it is, I really like it. Especially the ability to add pistol pouches on the side that can also hold a multi tool or snickers bar, and still not extend out from the body is legit. A placard in 9 for sub guns or one that has two AR pouches with two pistol pouches would be nice.

[@000111934]

This company goes above and beyond with user feedback. I would love to see a pincer placard with two 5.56 and one double stack pistol mag on it or vis versa

[@jrose6332]

T&E member here I love what this company is doing by using the feedback from their customers to dictate what their customers want next I would love to see a 7.62 NATO/308 AR-10 mag pouch

[@emmerr906]

As all suggestions have already been made - why not for 12 mm lipstick caliber?

[@monkeybeepbeep]

I'm pleased to say I am a T&E member and enjoy having an input, which I hope helps. As for a recommendation of the next calibre to produce next, I would look at 9mm, given all of the 9mm platforms being used or 7.62 to cover the AK and sharp shooter users.

[@grafixartz1]

I’m a T&E member- this certainly would be a great addition to my K19/Pincer placard setup. I’d absolutely love to see a single row, 4 magazine Pincer placard for Sig MPX magazines. Also a 2 AR magazine Pincer placard- when I run my Tavor X95, I like to have an empty area so it lays flush with my carrier. A 2 AR magazine Pincer with an integrated double stack magazine pouch together would be also really great.

[@bradyyamamoto4708]

Just invested in my first 7.62x39 AK build and would really love to see that variant next in the lineup for these placards to start building the kit I have designed around that rifle. Love the innovation Agilite continues to provide to the industry

[@joonalehtonen4598]

Another proud T&E member supporting this truly Awesome company. I'd like to see them doing one for 7,62*39 ak next.

[@StephenW85]

Agilite has been evolving rapidly, and the T&E program is awesome!! Great job at listening to your users opinions! Every product I have so far has been top notch. Pincer Placard needs a 9mm sub/pcc and a 7.62x51 variant!

[@jasonbrooks6267]

Looks awesome. Glad to see and hear ideas are being used. I agree with a lot of these comments for a PCC or at least the ability to multiple pistol mags and more first aid for the medics.

[@misterhex2516]

That's a great design, I've seen similar Placard in the past, but with this one, it give at least the option to add it and remove it when your needs had change... Can't wait to get my hand on it whit the Pincer Single pistol mag!

[@thetlan1642000]

New T & E member! I enjoyed the video. The admin pouch has a host of applications. IFAK, EDC, ADMIN, of course. Another consideration for the mag pouch could be for the 7.62 cal. Keeping the wings on the side for pistols mags, multi tools, lights, etc. the pouch can the be used for sniper missions holding their notebook, sniper dope, etc. mini tablet if applicable. Just my two cents. Best!

[@jamesfairchild4797]

Fellow T&E member as well...from reading the earlier comments, I think y'all hit the nail on the head with 7.62x51 mags. Standard AR mags cover all my 5.56, 6.5 grendel, 300 blk, and 6.8 spc needs. The question is what else is out there commonly used? 7.62x51 or standard 7.62 ak mags.

[@CJChris]

Would be great to test out Pincer Admin pouch in field by myself! Looks good quality and ergonomic. Of course as a AK user and slav, in my opinion next there has to be a 7,62x39 variant!

[@HandsomeRagz]

You should make a Breacher Placard or pannel next. A pouch for charges, grenades/smoke/thermite and shotgun shell bandolier.

[@danielal3367]

Double stack rows 556 or 308 single rows for bigger calibers. Great work like always!!!!!! Can't wait to buy some for my kits.

[@bermuda2163]

I love how slick the placard looks since we all know the most useful use for anything is fashion. I think it would be cool to see a chest rig version of this

[@TacticsTom54]

Been using this placard for a few months and absolutely love it . Went through 2 shoulder fire courses with the Agilite K19 and Placard and Holly shit does good gear make a difference.

[@chrisatwell6572]

Happy to be able to give input for projects for T&E, id love to see a pincer placard built for three oh hate mags

[@gustpulos2346]

Proud T&E member. This company produces some great gear that is high quality. I use my amap III pack everyday. I think a .308 mag pouch would be sweet for this setup. Thanks!

[@AcePilgrim]

T&E program has been a lot of fun so far. I love anything that'll fit AR, pistol, or SMG mags. A pincer placard for MP5 mags would be sweet

[@robanderson4045]

Very nice product. I really like how slim the rig looks. The mags fit snug , and they have a lot of room to grip mags. I would love to see a PCC version! Proud T&E member

[@ashton.minjarez2410]

I have my k19.30 and run AKM Would Love to see 7.62 pouches next. Appreciate all the hard working people at Agilite! 😊

[@dkaytwinzz482]

You guys continue making good products. Especially the placard. You guys should do one for shot guns or one that fits 308 mags

[@car._.mariii]

The second layer design is just incredible and unique and I love its functionality. I just switched over to the Agilite team/journey I wished I knew about you guys sooner but since learning about Agilite you guys continues to impress with innovative products and take into consideration and recommendations from your customers. I’ll keep it simple I’d love for you guys to come up with a complete battle belt set and just something simple like adding a radio pouch and a roll-up dump pouch. Hope you guys see this! 😈🤙🏾

[@ilovedetails]

Really love watching these videos. Agilite really puts a ton of thought into it. I too would also really love to see a 9mm PCC/SMG version however even more than that, I would love to see this placard have the option to be removed and worn a chest rig on its own as a low-vis option under a button down or in a jacket.

[@christianfritz7443]

T&E member as well awesome product! would love to see 7.62x51 set up next.

[@Agilitetactical]

Thanks for being a part of the team🦂

[@TacticGhoul]

Hi guys, I cant put into words how excited I am to see what you release next!! I would love to see a subgun / 9mm placard🙌🏼 Or even some grenade pouches with buckle fastening, possibly even the option to run it without the lid (for quick access) like the pistol pouches? Or even an IFAK. I must say if its any of my ideas or not. I will be getting it!! Top class quality and excellent work! I cant wait to get my hands on this :)

[@abezilla103010]

Continually loving the fresh ideas from Agilite to make my gear user friendly. The pincer placard is a life saver. The hanger pouch has been used to hold about anything I need for quick access. Now I can transition some of the admin stuff to this new admin pouch and use the hanger more efficiently. Maybe even having a hook&loop divider in either one would be great. As far as the pincer placard type/caliber; of course NATO 7.62 makes sense but I'm a fan of semi-auto shotguns but never seen to have a quick&easy place for or access to my shell saddles or tubes. I have the IWI TS-12 and Beretta 1301.

[@johntuttle-rn7jd]

Going to add this piece of equipment to my kit. Cannot put into words the highest of quality of Agilite products. Would like to see a Pincer pouch for the AR-10 style mags.

[@TimothyLucasTan]

Once again, another well thought out idea. Love it! With the renewed interest in 9mm SBRs in my neck of the woods, I would love to see one set up for that.

[@parkerblanton4725]

This design looks amazing and the modularity of your kits keep getting better and better. I can’t wait to get my hands on one. I’d love to see the pincer in .308

[@richardjtucker5662]

I agree with adding a 308 mag.

[@larrywarziniack5747]

Well done demonstration! Explained everything with this plate carrier and accessories!

[@argyll765]

Awesome product! Was happy to be part of the T&E program. I would like to see a breacher option and a 762 option

[@bobbyday8690]

Would really like to see it in 7.62 but I really like what you guys have came up with, it's definitely a great concept and very versatile!

[@Packypage]

I would really love more molle pouch varieties in the future, or creative pouches using the pincer technology!

[@Freedomrider355]

Looks awesome. I would also like to see 7.62x39 configuration. Thank you Agilite for the opportunity.

[@AshleyDrake-vc1yi]

Incredible design on the second layer pouch I really enjoy the versatility with in the pouch it’s self. I would love to see the second one introduced as a 7.62 Caliber !

[@warwolfactual4801]

T&E member here also. I’d like to see a Pincer Placard that can run 5.56, 7.62x39, and 7.62x51 mags. Having the option of running any of the 3 different magazines at any time and not have to switch load outs makes it really nice.

[@maxhavoc312]

Would be nice to see a variation that hold 7.62x51 mags

[@buddysweeny4193]

Been loving the streamlined practicality of your products. Would love to see your take on double mag pouches, maybe some that fit on both plate carrier and/or belt?

[@jeffreyroy7623]

Always innovating and always getting your customers involved. Would seriously love to see a 762x39 variant.

[@grimlock8309]

I’m proud to say that I am an T&E member. And I would love to see a pistol and shotgun, or rifle and shotgun placard. Just to have a little extra there, either as a pouch or a type of elastic holder.

[@explqre1]

Great product to compliment other great products, appreciate being in the T&E program, and would like to see a versjon of pincer that supports MP7 and equivalent sized mags.