AGV INSYDE tutorial | Tourmodular

[@Cornel1001]

A list of compatible helmets will be apreciated !

[@rexvaughn986]

Will the JBL speakers fit in the AGV Tourmodular with Cardo Insyde

[@useless274]

i'm betting they will mate up but in the packtalk series cardo firmware wouldn't work. I think the amp gain is way off between these crappy speakers and the JBL ones.

[@GK-vh9vu]

Do I need to remove the extra flap on the cheek pads where the speakers are?

[@smudger372]

looks like it would be quite waterproof though alot of effort to set up

[@PB-pm9cw]

Will this work with the AGV K6 Helmet?

[@agvhelmets2956]

Ciao, thanks for contacting us. We would kindly invite you to contact us on the following link for this type of requests: agv.com/contactus/. Our consumer care team will come back to you as soon as possible. At disposal.

[@GeoffLaPlace]

I have two K6's, for the difference in artwork of course, and I will contact AGV before ordering this. The Main goal is hearing google maps while I drive, and maybe using Aleaxa (or whomever on my iphone) or google for controlling phone while i am driving.

[@soaringeag1392]

Based on the US site, it appears as though this is compatible with the new K3(ECE 22.06) Helmets, is this correct?

[@FraserJohnstone1]

Is the inside still supported? I can’t see it on the App

[@FURIOUSALPHAGAMING]

Can we mount any other comms system

[@agvhelmets2956]

Dear Moses, thanks for contacting us. We would kindly invite you to contact us on the following link for this type of requests: agv.com/contactus/. Our consumer care team will come back to you as soon as possible. At disposal.

[@mardelplatalimousines3423]

I love it !!!

[@thorstenmetalhead9666]

Is this modul also compatible to the Cardo Mesh Intercom?

[@agvhelmets2956]

Hi Thorsten, Please write us directly through our Contact US :www.agv.com/us/en/agv/contact-us/contact-agv.html . Our Consumer Care team will give you all the technical information you are looking for.

[@piotreksudo1770]

Will work with agv k1 helmet ?

[@agvhelmets2956]

Hi Piotrek, no. We confirm you that the AGV Insyde is compatible only with Tourmodular. At disposal.

[@matiasandradebravo]

💙Gracie....Ia🌹🦁🌞🏖💙

[@phd-it]

I just got an AGV Tourmodular helmet with an Insyde system, and removing a button cover from the helmet is impossible.

[@agvhelmets2956]

Hi Dmytro, please write us directly through our Contact us page: www.agv.com/us/en/agv/contact-us/contact-agv.html . Our consumer care will give you all support you need. At disposal.

[@UmeshKumar-bl6lp]

What this video doesnt clearly show is that inorder to remove the button cover, you also need to press the clip on the bottom of the helmet while using the helmet tool which slides into the grooves to pop out the buttom cover

[@ra.v.l4038]

Shitte explanation on how to hide the wiring, completely omitted that part. Tiny cavity on right side way to small for the wiring that needs to hidden and no explanation on how to stuff it in there without damaging the wires

[@syyyr]

This is the worst tutorial ever. Why is it a tutorial, when there are cuts in the key moments when disassembling the components? 0:36 an arm covers half of the view 0:42 why cut the video here? right as you pull something out of the helmet 0:55 you use this tool, to remove the plastic and then there's a cut. The video doesn't at all show what happened And so on, and so on...

[@useless274]

MICRO USB IN 2024?! Why the hell didn't you guys use USB-C for this connector? complete fail. Also, we need better speakers! These are very unimpressive. You're charging JBL prices and we get weak, crappy sounding junk!

[@patrik9666]

Absolutely terrible tutorial. The frequent cuts and camera angles make it very hard to follow and it doesn't show how to stash all those connectors into that tiny little hole in the helmet where I can't even fit one of them (the headphone jack)! I had my Schuberth C4 Pro intercom set up in 5 minutes. I already wasted an hour trying to fit this bloody wire mess inside the helmet.

[@stephenlane8366]

I'm with you - hopeless instructions with the kit and not much better here. I've sort of poked all the leads and connectors away but it would help if there was a proper space of them or at least that they weren't all bunched in the same place!