AIM MXK10 DASH & GPS DATA LOGGER - FITTED TO 2016 KAWASAKI ZX-10R WITH WOOLICH RACING SOFTWARE

[@ashinoz11]

If you ask for a feature they would be able to add it. I ride to work everyday and liked the total fuel amount used on the original dash, say 12.6 litres so you knew roughly you had 4.4 litres left. I have been working on a beta version and have it accurate to the tenth of a litre. You would have to ask if you want that, they gave it to me but said it was not to be shared and lots of new features are coming and please be patient. I use 42% correction on the fuel used to have it accurate to the tenth. I am up to my 5th full tank with exact results. They added it to the main display along the bottom and in the trip metre screen. I figured out I could change the titles of the 4 trip meters as well.

[@TheToastBanditRacing]

Man that's amazing! Do I just email support with a feature request? My dash arrives tomorrow, I've been on the fence for a year but I finally pulled the trigger. Could you send me a picture of your fuel indicator, I'd love to see it

[@ashinoz11]

@@TheToastBanditRacing I just spoke to Ron in Australia and said the dash was missing the fuel used display and he emailed me a firmware update that had it back in and I have worked on the accuracy as I said and have it spot on. It's just a number along the bottom of the dash which I know is the litres used. The rest is in the trip meter area on the dash. I am at work but I will take a quick video when I get home. Cheers

[@ashinoz11]

kzbin.info/www/bejne/m6DZn2RriNh4q8U

[@junaid2149]

is the dash water proof? like if i wash bike do i have to cover aimx10 dash??

[@ashinoz11]

@@junaid2149 yes it's waterproof. I ride in all weather. No problems.

[@TheToastBanditRacing]

I emailed support and they said you can but didn't really show me an example. Do you know if you can display any of the ECU channels on the dash? Like for example the lean angle or even the Raw fuel channel?

[@JodieMeaux]

may be a long shot here but does anyone have advice on racecuts on the trans for the zx10r?

[@KB-yj5xp]

Hey just wondering how the dash lasted long term. I'm thinking of picking up a 2016-2020 gen over the new one and putting one these dash. It will mainly be a track bike with some street use, how did you find it after you used it for a while?

[@ashinoz11]

Zero issues. Works flawlessly as it should for the price!!! I ride in all weather, so mine has been cooked in the sun, frozen in cold nights, absolutely flooded with rain and it has never had a single issue. The only complaint I have ever read was a pathetic "can the start up screen be made to go faster?" Well no it can't. So as long as you can live with that you will love it.

[@c95carr1]

I got left and right sig working ,for the sake of good can not get the high beam icon to come on..wish aim would have a step by step for each icon config..fighting high beam for 2 weeks HELP...

[@ashinoz11]

I don't understand, it just has the 1 main plug from the ECU ? Does it come on at startup when the dash does it's pre start light up? If it does my guess is the high beam switch itself might not be wired correctly........ the dash has the Diagnostics screen, if there is a fault it will come up on that page.

[@ashinoz11]

Everything should just work, it's plug and play? The fuel correction is the only thing I had to adjust, currently at 37% with my tune

[@ashinoz11]

It won't work unless the bike is running either.....

[@MrAhtisham420]

hey i have a question if still relevant, so if i change my original dash to this aim one the millage on the odometer will start from zero? and what if u put the old one back will it count from where i left ? or from where it should be,-? its a bit confusing

[@ashinoz11]

I haven't put my original back on so I don't know what kms it will show

[@pedrocarapeto82]

how can you set the correct milage on the odometer ?

[@ashinoz11]

The dash has 4 trip meters that you can rename in the Race Studio software and send to the dash. I changed one to Odometer and put my previous mileage on it. Then I made one for the Tyres, 1 for the engine oil, left Trip 1 for the daily trip meter and it has System mileage for the dash. But as far as I know it starts at zero and cannot be changed.

[@terryturner1364]

Will this dash with the harness and the 02 sensor will it display the afr on the dash?

[@ashinoz11]

I am not sure. I know you can buy a 4 port extension harness and plug an O2 Sensor into 1 of the ports. It would definitely record the data to see on the Race Studio software. I have Woolich Racing AutoTune O2 sensor on my bike separate from the dash.

[@speedtwitch]

How is the brightness and display resolution? Is it comparable to a new r1 or something

[@ashinoz11]

I have a 2015 Yamaha R1M as well and they are both excellent displays. I don't use full Brightness on either one.

[@oneshot_onekill4618]

You dont have to pull off the whole front end to change this?

[@ashinoz11]

I just watched the AIM MXK10 install video. It is pretty easy. Here is the link. kzbin.info/www/bejne/ip6zZYaHr7hlpJo

[@oneshot_onekill4618]

@@ashinoz11 appreciate it!!!

[@samlam2105]

I like this watch face, can it be worn with the CBR650F?

[@ashinoz11]

Mate this particular dash is for the 2016-2020 ZX-10R Kawasaki. They sell alot of different styles. Aimsportsystems.com.au

[@innovativegifts2806]

How to buy....this product!!! Or to import india??? Your you share the buy link

[@ashinoz11]

aimsportsystems.com.au/aim_shop.html#!/MXK10-for-Kawasaki-ZX-10-5-Plug-&-Play-Dash/p/143228306/category=109026445