AIO Flight Controller (NOT JUST FOR WHOOPS ANYMORE!)

  Рет қаралды 8,673

TMac

TMac

Күн бұрын

Пікірлер: 51
@TMacFPV
@TMacFPV 3 жыл бұрын
Is this GOKU your new GOTO? 💪 What do you think of this AIO? Free 3D Print file for 20x20 to AIO Mount Adaptor at link on this page: tmacfpv.com/fpv-pilots-den/
@AdrianoCasemiro
@AdrianoCasemiro 3 жыл бұрын
Less is more is the trend now. If you can get away with this much power in such a small package, then it's great. Reliability is very important to me. Because I just crash a lot...
@TMacFPV
@TMacFPV 3 жыл бұрын
@@AdrianoCasemiro I agree whole-heartedly. Need more "reliability testing" but I'm expecting a lot out of this one!
@RCOverKill
@RCOverKill 3 жыл бұрын
It wasn't great but almost 3 years ago on my second build I used an aio alcada fc for a full size 5 inch race rig. They will have 6s capable whoop boards able to fly full 5 inch freestyle rigs of 800 grams. It's amazing how far we've come in the past 3 years I've been in fpv, and Soo far in the 25+ I been in the hobby. Thanks, take care!
@TMacFPV
@TMacFPV 3 жыл бұрын
I know, right Papadoc?!? This GOKU's 6S with 40A continuous! Much more than enough for my Micro's!
@h2o-fpv623
@h2o-fpv623 3 жыл бұрын
Just in time im looking for an AIO fc and I think im going with this one thank u tmac. U did it again.
@Acestrex
@Acestrex 3 жыл бұрын
I’m not sure why my outer leds aren’t working even with the led switched on. Any ideas?
@CarbonGlassMan
@CarbonGlassMan 3 жыл бұрын
I've been using an AIO board on my 5 inch for months now. 45 amp rated and running 2306 motors and 740 grams all up weight. I've had no trouble so far. I prefer AIO boards. They take up a lot less room.
@TMacFPV
@TMacFPV 3 жыл бұрын
Yes! My feelings exactly! Trouble is for me finding one with all the features I like. The Flywoo Goku GN745 has all of them (only 8Mb of Blackbox, wish it was at least 16, but I can work around that). Just grabbed the last GN745 I could find in stock in N. America yesterday. Banggood is showing them as discontinued. Flywoo does have the GN745 EVO HD, but that's a larger form factor. Only other AIO FUN I've been able to find that comes close with all the features of the GN745 F7 is the iFlight Beast. Been reluctant to try it as long as GN745s have been available
@CarbonGlassMan
@CarbonGlassMan 3 жыл бұрын
@@TMacFPV I haven't learned anything about black box or tuning yet. I just fly stock settings with my rates.
@TMacFPV
@TMacFPV 3 жыл бұрын
@@CarbonGlassMan 👍as long as you're having a blast, that's what's important! If you want/need to start learning tuning basics (simple & easy to understand), this short Playlist may help Micro FPV Drone Tuning Guide: kzbin.info/aero/PLKAiYAaTdvmoXyDzrPWj9-sxv4m1GNKCT It applies to more than Micro's
@CarbonGlassMan
@CarbonGlassMan 3 жыл бұрын
@@TMacFPV I'll check them out eventually. I looked into it before and it seemed a little complicated for someone that wasn't very good at flying yet, so I decided to try to get good at flying as the betaflight settings are and then learn to tune. If I can fly a poorly tuned quad well then tuning it should make my piloting skills seem even better.
@TMacFPV
@TMacFPV 3 жыл бұрын
@@CarbonGlassMan Exactly CarbonGlassMan! However, you're most likely flying a very nicely tuned 5" Quad since Betaflight Dev's have done an outstanding job with defaults for 5" Quads. in fact, the defaults work quite nicely from what i've seen on 4" and under too. Just a little tweaking here and there if you really want to get into it and spend the time. Not necessary though to have fun! Many thanks & much respect to BF Dev's!
@093dourado
@093dourado 3 жыл бұрын
I saw here on KZbin a 5in1 controller, I also believe that soon we will have a single board with everything ... I sent you in the video two links of a project that I found very interesting ... a 5 "that had time to fly 72 , 5 minutes that I remember ... if you can take a look ... hug and great job.
@kevinsmith9420
@kevinsmith9420 3 жыл бұрын
Another is the iflight beast H7. DrainMan FPV printed an adapter and did a build with it.
@WhateverFPV
@WhateverFPV 3 жыл бұрын
I just got a 20x20 35a AIO I just installed on a 5" 6s racing build! We shall see how it holds up...
@TMacFPV
@TMacFPV 3 жыл бұрын
Just flew this Flywoo GOKU GN745 in a build for first time yesterday. Video will be posted today at 10 am EST. Let me know how yours turns out for you👌
@waelfathe9909
@waelfathe9909 3 жыл бұрын
can some one answer me why all in one not have the imu belt in imu is inertia measurremnt unit
@TMacFPV
@TMacFPV 3 жыл бұрын
not sure I understand your question correctly. The AIO does have the IMU "built in" See product description: "GN745 AIO Flight Controller Specification: MCU: STM32F745 32-bit processor,216MHz, 512Kbytes Flash IMU: MPU6000 (SPI)"
@maceliusfpv370
@maceliusfpv370 3 жыл бұрын
oooo, shiny! I have the iflight 20A in my primo, it's great.
@omenmm
@omenmm 3 жыл бұрын
Yea.... but RacerStar had this F7 AIO 45A fc a long time ago ....
@k1ortia
@k1ortia 3 жыл бұрын
Could this be used for micro rc plane with either a single or twin motor set up? Cheers
@paulhope3401
@paulhope3401 3 жыл бұрын
Yes, of course.
@Loz348
@Loz348 3 жыл бұрын
i recently got 3 of these, only 1 built so far but it is a much better aio than the jhmcu 35a f4 i was using. blackbox was the reason i bought these. the 3" i build flies nice on stock, now i just gotta learn the blackbox. i cant yet comment on durability even though iv crashed it a load already. shame the solder pads are so small they are a nightmare and no labels makes it easy to solder the wrong pads. i had my rx and tx over one pad to far even after a long study. luckily iv made this mistake before and went straight to it. i do notice it has 4 extra motor pads does that mean you can have more motors? It comes on 4.2.0 should i upgrade to latest firmware?
@TMacFPV
@TMacFPV 3 жыл бұрын
Hey DIY FPV! You don't "need" to update any firmware at anytime unless you would like to in order to get added features and possible fixes that have come out (true with transmitter firmware also). For each of my builds when starting out with them I do update to latest firmware ONLY after saving the original CLI " dump all" to a Word file just in case I need to revert back to it later. Regarding Blackbox, this may help get you started kzbin.info/www/bejne/m36wo3WbjZZlopI . Clear skies friend!👍😁
@Loz348
@Loz348 3 жыл бұрын
@@TMacFPV just a quick one cos i always update to latest too so most likely will. Why would you save a stock firmware. Surly re flash 4.2.0 would contain all the same files its just board orientation, motor mapping and all the other changes that are applied is that correct? Am i understanding this correctly? I never save my config just flash and if the motors are mapped wrong ect only takes 10mins to correct most things. Or am i missing something important here?
@TMacFPV
@TMacFPV 3 жыл бұрын
no, not missing anything too important. Just ease of use for reference. If you've got the "dump all" file saved, no need to reflash, just copy and paste into CLI and hit return. Also, you can "search" on saved file using CTRL F to find any setting you may need to research. Just stuff like that. Its also available to you n a file without having to connect to Betaflight. Just a "backup" way of doing things
@micsherwood4930
@micsherwood4930 2 жыл бұрын
Totally agree!
@lavachemist
@lavachemist 3 жыл бұрын
@TMac is there any chance you can share a firmware dump from the F745 AIO? I am planning to make an Arducopter target for it, but I couldn't find the target anywhere.
@TMacFPV
@TMacFPV 3 жыл бұрын
here you go. A link to teh CLI "Dump Alls" for both e original Betaflight 4.2.0 firmware that came with it (this starts on page 24 of the document) and the updated Betaflight 4.2.6 firmware (which starts on page 1). headers in bold precede each version of teh command settings. You only need to use 1 (either the pages for BF 4.2.0 OR the pages for BF 4.2.6) bit.ly/FlywooGN745AIOFCBF420andBF426CLIDumpAlls
@lavachemist
@lavachemist 3 жыл бұрын
@@TMacFPV Thank you sir! You are a lifesaver.
@AdrianoCasemiro
@AdrianoCasemiro 3 жыл бұрын
A couple of dumb questions here. How do you mount these 45° off-set kind boards on a regular frame? Do I need a 3d printed adapter? Wouldn't that plastic adapter warp under high operating temperature?
@BrandonBeans
@BrandonBeans 3 жыл бұрын
Folks use an adapter plate usually. Alot of frames are coming with the toothpick pattern mounting option now.
@TMacFPV
@TMacFPV 3 жыл бұрын
I use the 3D adaptor for which I have a file you can print out here drive.google.com/file/d/1CyZ8u7AA5XuAvWAQRZMTqOl88ycRKv0i/view (heat hasn't hurt mine at all--its dense enough) or as Brandon baked Beans has said you can also get an adaptor plate. I also may have another solution coming for you "soon!" 😉
@AdrianoCasemiro
@AdrianoCasemiro 3 жыл бұрын
@@TMacFPV Allright, Mr. Cliffhanger. I'll be looking forward to knowing all about it.
@CarbonIcarusFPV
@CarbonIcarusFPV 3 жыл бұрын
Nice review!
@TMacFPV
@TMacFPV 3 жыл бұрын
Thanks Carbon Icarus!
@gerdanc
@gerdanc 3 жыл бұрын
Hopefully it doesn’t light on fire like the Goku AIOs I’ve used.
@joenaylor34
@joenaylor34 3 жыл бұрын
Add a little flux, works better for me
@WATCHMAKUH
@WATCHMAKUH 2 жыл бұрын
Man…I miss 2021 prices
@dndon2007
@dndon2007 3 жыл бұрын
be careful this type of flight controller all in one has problem sometimes with flyaway depending on the battery you use
@TMacFPV
@TMacFPV 3 жыл бұрын
hmmm . . . been using them (AIOs) for awhile now with 2-4S with zero issues. Have not used 6S with them though
@dndon2007
@dndon2007 3 жыл бұрын
@@TMacFPV nice to hearing that from you about this controller.. I faced this problem flyaway with geprc 20a and JHEMCU 25a AIO on using more than 450mah 4S 😢
@Loz348
@Loz348 3 жыл бұрын
@@dndon2007 i was getting flyaways lately after building with this aio it turned out i had 1 wire touching both aio and also the vista mounted above it so i re routed the wire also i re routed the rx and tx which were touching the gyro and sure enough no more fly aways and the motors sounded alot smoother. just an idea. i will be thinking about my wires more on future builds.
@Barnz1980
@Barnz1980 3 жыл бұрын
Hey Tmac, if you get a sec can you check out my newest video. i think my brand new Nebula Pro Vista is DOA
@TMacFPV
@TMacFPV 3 жыл бұрын
Hey Barnz1980! I checked out your video with the Vista issue. Not certain bit it could be a couple things. First, I noticed in the video you said you connected it to 5V. Its my understanding the Vista takes 7.4-26.4V input. Secondly, it MAY actually be your "smoke stopper." IF your smoke stopper has 2 different settings (such as 1A or 2A) and you're using the lowest setting, it may get "tripped" simply because the Vista is drawing more current than what you have the smoke stopper set at (even though the Vista is drawing its "normal" amount). What I'm trying to say here is you MAY have your smoke stopper set at the wrong setting for use with the Vista unit. Of course, if you. From Oscar Liang's article on the ViFly Smoke Stopper: "It has two current limit levels - 1A and 2A for different applications. If there are power hungry devices installed in your drone, like a VTX or DJI Air Unit, you can select 2A. The 1A option is safer and more sensitive, preferably for low power builds like a 2″ or 3″." Pease note, if this is NOT your issue and you change the setting on your smoke stopper when you actually DO have an issue, then you will risk burning out other components. This was my "Disclaimer!" Maybe one of these will help.
@Barnz1980
@Barnz1980 3 жыл бұрын
@@TMacFPV thanks for checking that out Tmac 👍 Oh the the 5v, that's something I overlooked BUT actually have my 1st vista wired the same on the Armattan Gecko 3" & to the same FC (mamba mini stack) 🤔🤔🤔. The gecko has been in the air a few months now & all good. Saying that I will still definitely move the + connection though & try that 👍. My smoke stopper is a YRrc stopper off Banggood, it doesn't have a swtch on it 😭 Many thanks for your quick reply mate 👍👌
@Barnz1980
@Barnz1980 3 жыл бұрын
@@TMacFPV ok so I had some coffee & sat down to fiddle with drone. I moved the vista + & - wires to a vcc pad & the ground next to it. Still the same 😢 BUT then I removed the vista from the drone (again 😂🤣) & now the drone seem to be STILL doing the short on last beep 🤔. That new, every other time I've had the vista disconnected I don't have a problem. Rather confused I decided to plug the vista directly into a 4s battery (via smoke stopper ofcourse) & after a bit the lights are bloody staying on!! & Then I finally see the lights go full green!! WTF!! So my vista works via a battery but not from the FC (5v or VCC) Oh god lol, so I'd lean towards my FC is dodgy then? Both were brand new before being soldered together on Friday. P.s I may have ordered another Vista last night 😐 sigh...
@marielizysurourcq
@marielizysurourcq 3 жыл бұрын
"70 euros gone !". that's what your wife will scream when you fry / bad solder one of these... So, what's China''s growth compared to Europe or the USA during this pandemic ?
@CrashGoatFPV
@CrashGoatFPV 3 жыл бұрын
thankyou
@TMacFPV
@TMacFPV 3 жыл бұрын
Sure thing Dodge!👍😄
THE AIO ERA IS UPON US AGAIN // Flywoo HD EVO
6:51
Drone Mesh (Drone Reviews)
Рет қаралды 7 М.
Fixing the #1 Cause of Flight Controller Failure
12:30
Mr ShutterBug
Рет қаралды 24 М.
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН
Quilt Challenge, No Skills, Just Luck#Funnyfamily #Partygames #Funny
00:32
Family Games Media
Рет қаралды 55 МЛН
REAL or FAKE? #beatbox #tiktok
01:03
BeatboxJCOP
Рет қаралды 18 МЛН
Micro FPV Drone Frame Kit (4 INCH KOBARA)!
16:12
TMac
Рет қаралды 2 М.
Choosing Flight Controllers for FPV
20:59
Rotor Riot
Рет қаралды 83 М.
So Much Power In 8 Grams!!!// Flywoo Goku GN745 40A AIO
10:52
Drone Mesh (Drone Reviews)
Рет қаралды 8 М.
iFlight Beast H7 AIO - A Whoop board for FULL 5"?
12:46
KababFPV
Рет қаралды 33 М.
What causes Propwash and how Betaflight Dynamic Idle can help!
9:49
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН