Air Powered Lego Hot Rod - Turbo LPE Engine, 5 Speed Gearbox, Disc Brakes and Air Suspension!

[@GreenGeckoLegoTechnicWorkshop]

What type of Air Powered Video should I do next? Plane, Boat, Motorcycle... Comment your Ideas Below! 😄

[@LeleganceCoral]

definetly a boat, i have seen cars and other ROAD vehicles, never a boat. i think it will be a huge challenge for you.

[@bartybum]

Dunno about vehicle but you should experiment with dry ice instead of compressed air, for longer running time

[@PLASMA_2005]

Tank... do a tank... might need a smaller engine to power the steering tho

[@jdawg1712]

If you can make a FLYING aircraft, that would be historic.

[@GreenGeckoLegoTechnicWorkshop]

Great ideas

[@R2-D2663]

I have never seen anyone so skilled with Lego that is simply amazing

[@dacoolbob0]

4:09 bro made an 1.3 tdi sound fr

[@diemphuonglam4905]

Kwbsqelubsuqwbksvhj?qskubxqwkbusub

[@williamkeller5845]

Holy crap! This thing is so awesome! Accurate, too! I love seeing working models of the cars I hold near and dear to my heart. Keep up the amazing work! I'll pay your shop a visit later!

[@GreenGeckoLegoTechnicWorkshop]

Thanks!

[@williamkeller5845]

@@GreenGeckoLegoTechnicWorkshop Maybe next you could do a 67 Chevrolet Impala! I'l love to see different gears etc.!

[@venturilegochannel9991]

Nice to see you again ! Awesome work as always !

[@GreenGeckoLegoTechnicWorkshop]

Thanks

[@Rahulkumar-cz6zt]

Ok? Llo88kip0 lomm.k0? . C1 z 11:38

[@rahulcharpota9420]

​@@Rahulkumar-cz6ztललo

[@Bokka2011]

Hello! From Russia, you can order modified Lego pneumatics from you???

[@SfsultamateGamer]

Yes

[@GreenGeckoLegoTechnicWorkshop]

Buy the Inline 4 Cylinder Turbo Lego Pneumatic Engine Kit on My Store (15% OFF): www.greengeckoworkshop.com All Lego Pneumatic Engine Kits: www.greengeckoworkshop.com/collections/lpe-engine-kits

[@SpacedHawk]

This hot rod model has unlimited range: as long as you have an unlimited length of tubing.

[@aidenweldon5298]

Eventually the drag of the tubing would weigh down the car enough to stop it

[@SpacedHawk]

Edit: This hot rod model has unlimited range: as long as you have an unlimited length of tubing and an unlimited source of air pressure and unlimited strength in the components to withstand such pressure. Am I missing anything else?

[@guentherjuergen7304]

paintball tank

[@guentherjuergen7304]

@@SpacedHawk thats what you were missing :D

[@Sandy-gorilla]

Yes but only if he pays his electric bill to keep his compressor running

[@technoviking9999]

This is another level of building legos

[@BrickEngines]

You’re finally back! Your builds are insane

[@HeyDropthat]

one of the coolest things I've seen on youtube, along with PeterSripol building and flying his own electric airplane

[@JoeZarx]

Dude... wow... that looks and sounds so good.

[@The_RC_Dude]

Another insanely cool MOC! Pneumatic engines always look, function, and sound great, but the air suspension/adjustable ride height was also a super nifty feature. It's crazy how you can make your 5speed + R gearbox so small, it looks to be almost half the size of the one found in Lego's 1/8 scale supercars! I gawked at the disk brakes, never seen those done like that before in a Lego model. Not to mention how epic the turbo is - I love how it spins, makes noise, and is even powered off of the exhaust air, super realistic build. Super talented builder, love it! All the pneumatic engine models I've seen all need a separate air tank though - would it be possible to build something like a pickup truck with an enclosed trailer, and inside the trailer you could house a smaller air tank, and have motor driving pistons to always keep that pressurized? Basically like a mini mobile air compressor in the model so it's fully remote

[@GreenGeckoLegoTechnicWorkshop]

Thanks, I have made a 8x8 truck with an on board air tank you can watch it here: kzbin.info/www/bejne/lWfQgqebi8apnKM

[@steve.palmer]

Can the lego pumps with technic holes on both ends be used with a Lego motor to maintain a constant pressure to avoid having bottles on it?

[@Justwayne88]

Just ordered the 4 cylinder and 1 cylinder switch less. Really excited great designs and look forward to building. As I said previous I have already build the old 1 cylinder version.

[@zaxdadeer23]

Ok the semi-functional turbo is just 👌

[@bartybum]

Awesome work, love a car with a pneumatic engine. By the way, have you done any more work on the Ripsaw V8?

[@roborovskistudios4892]

I think he did

[@Luciferi_Immortalization]

Why does the car look like 1940s race car.

[@SmartLegoSG]

Thank you for being such a passionate and creative LEGO Technic builder. Your work brings joy to people all over the world.

[@GreenGeckoLegoTechnicWorkshop]

Thank you

[@gamingbricks8604]

its been like 10 month since you uploaded, now I know that im getting the engine in you shop. also thanks for uploading keep on it.

[@gamingbricks8604]

thought you were gone

[@brendenkostohryz4174]

How you managed to have enough time to figure out how to build this is beyond me, but i thank you for your service

[@duckdestroyer2412]

Wouldn't power be better delivered on a crossplane crankshaft? Meaning 90 degree separation between each of the crankshaft throws. In this instance, considering the two-stroke style "firing order." Because of separation from each pistons "firing".

[@A_player_in_useGD]

For starters this is and awesome build but I challenge you to make a full sized go kart with lego

[@SurpriseTB]

this car is just awesome could you make this car in your shop too?

[@Ryan_1920]

Very cool. What if you built a little trailer( like the ones you usually see these old cars towing) with an air tank you can fill up so it doesn’t have to be connected to the air tank. Or maybe even a small air compressor that’s battery powered 🤷🏻

[@LegoWondersOfficial]

Your videos are always so entertaining and informative!

[@GreenGeckoLegoTechnicWorkshop]

Glad you like them!

[@Eli5idk]

you should try to make a actual working turbo, i think it will work because it will compress the air even more

[@ductape5348]

This is awesome

[@KjplayzVR]

This. Man needs to get hired by Lego because this so freaking cool

[@throttleblipsntwistedgrips1992]

Would love to see a 5-cyl LPE kit. I'd buy several as stocking stuffers 😂

[@luckiuable]

Amazing project❤

[@SurpriseTB]

OMG Awesome car.. could you make a rebrickable post for the engine and the whole car I'd love to build it and the engine!

[@Bakar_YT1]

If anybody knows od like to know the name of the song in 0:14

[@migasmiguel10]

Backwoods bbq

[@Sadcat2011]

What if you connect those parts that you used to compress air to the engine in a way that pumps it for you you get infenite air

[@TheOneSigmaMale]

This is amazing. Love the look and the video. One thing you could have done is put the air tank onto a Lego trailer connected to the car or something like that but overall awesome build

[@BotondPeterdi]

this is the coolest thing i’ve ever seen ngl

[@LeleganceCoral]

FIRST! love your motors by the way!

[@GreenGeckoLegoTechnicWorkshop]

Thank you!

[@Hugookas]

HE ADDED A WORKING TURBO Amazing work my man

[@flightsim0018]

so lucky you guys have the parts and things and get to build cool stuff

[@Justwayne88]

Fantastic build love the engine, are you adding this to rebrickable? I just build your 1 cylinder

[@GreenGeckoLegoTechnicWorkshop]

Yes i will be

[@Notbruck]

Yessir this channel is not dead❤

[@diyfireking]

Great to see your post 👍👍

[@pebbles8964]

Nice to see your back🎉 I made your Lego motorcycle 2 years ago😊

[@Unknown-rf4bu]

So I was looking at that huge engine the turbo one and do you and do you have to put that all together or does it come put together?

[@GreenGeckoLegoTechnicWorkshop]

The Complete Engine Kit comes with all the parts and Instructions to build the engine, just like a normal lego set. If you would like to purchase a engine pre-built, please send me a email on my store.

[@Amtrak153]

3:13 Literally a Honda Civic engine for no reason

[@Kornthedawg12]

this genuinely impresses me

[@bramweinreder2346]

Great project :) this car would make a ton of sense with an automatic gearbox.

[@Heroes99999]

Hi There New LEGO Subscriber Green Gecko Lego Technic Workshop I'm Here For You

[@quipstad]

It's mind-blowing that Lego Technic actually makes these parts (differential, and disc brakes with printed detail!)

[@FTechLegoGuns]

Great to see you uploading again!

[@guentherjuergen7304]

very nice! How about adding a trailer with a 300 bar paintball tank with regulator? Then it could drive by itself without needing to have a air hose attached.

[@GreenGeckoLegoTechnicWorkshop]

Yes that would work

[@guentherjuergen7304]

@@GreenGeckoLegoTechnicWorkshop I mean that would solve the Problem of running Behind the car with an airhose. But then again 300 bars of pressure is no joke.

[@94carbonteg]

This is awesome! I'd love to see something like this go into production

[@GreenGeckoLegoTechnicWorkshop]

You can buy the Inline 4 Engine, 5 Speed Gearbox and all the motors and pneumatics seen in this video on my Store: www.greengeckoworkshop.com

[@Bliz989]

Wow! You did a Great job!

[@GreenGeckoLegoTechnicWorkshop]

Thanks!

[@yangrunli9557]

correct way to play with lego

[@michaelkajer6713]

I really want a mk3 inline 6.. the inline 6 with this turbo and crank would be unbeatable.. do you have any plans for something like that?

[@GreenGeckoLegoTechnicWorkshop]

Yes, I will be making a New MK3 Inline 6 based on the Inline 4 Engine.

[@mikosoft]

The engine sounds just like Skoda 120 engine!

[@issad3543]

Hell yeah, amazing creation! good to see u back

[@Millie_oo0]

Very nice hot rod and engine. I just had one question, what does the turbo do as in ‘spinning off’ the exhaust. Does it increase the lego engine’s efficiency or something else?

[@GreenGeckoLegoTechnicWorkshop]

The Turbo spins very fast and makes a Turbo Spooling Sound.

[@Millie_oo0]

@@GreenGeckoLegoTechnicWorkshop ohhhh ok thank you!

[@Notbruck]

​@@GreenGeckoLegoTechnicWorkshopis your servo proportional?

[@gryglickii]

good to see you back bro!!

[@shlushe1050]

You should try to make a pulling truck and sled! I've tried it on my channel but I 3d print parts, these piston engines would be awesome to see doing work like this!

[@GreenGeckoLegoTechnicWorkshop]

Cool idea!

[@mohdfadlyarifin2433]

Try use air tank from rc planes.... Smaller size is available too. So u can have indoard power-supply(air) for ur lpe

[@Pablo-Turbo]

snowrunner music at the start

[@kerbalnout1255]

U a real one 😔🤘

[@Pablo-Turbo]

my man 💪

[@coleriddle]

The songs name is backwoods BBQ

[@johnnyjxdthegod2655]

Your builds are amazing, probably just as good when you started

[@GreenGeckoLegoTechnicWorkshop]

Thanks!

[@robinhood184xD]

would’ve loved to see a brake test from max speed 😢 still very nice video tho!

[@alexy696]

the fact the 1 cylinder sounds like the thumping of one

[@SimplyMyBuilds]

The engine looks huge on the frame 😮

[@MrBAlllON]

Cool/ how to ensure the supply of air under pressure inside the layout itself, taking into account the balance between weight and power.

[@Tyreek1]

A Lego turbo is crazy

[@froggo5000]

That is really cool! Keep up the work!

[@GreenGeckoLegoTechnicWorkshop]

Thanks! Will do!

[@jeromelee7271]

You da TRUTH ❤❤❤

[@clevmagyk770]

welcome back. looking forward to more

[@erwindelacruz2785]

Good work man your a legend

[@youtuxom]

I love the clicking sound

[@slicc1735]

Honestly sounds like my A4s 2.0T

[@Minigame507]

It even sounds like an actual engine with the legos rubbing together. Love the car especially since I’m a big fan of cars and legos

[@bethanyhart3089]

You're a pro dude

[@Kids_Scissors]

I love that it even sounds like a tiny engine :D

[@witchii]

This is so cool! Makes me amazed every time by how creative people are!

[@GreenGeckoLegoTechnicWorkshop]

Thank you

[@UngollDerUngolLoide]

So AWESOME!!!

[@GreenGeckoLegoTechnicWorkshop]

Thank you!

[@panzerkampfwagen1717]

the turbine could indeed be turned into additional power. Connect it as a belt supercharger!

[@radekgames7584]

normal person see a normal air engine but i see a potencial for infinite energy

[@DeltonAdamsLEGO]

Do you think you could take the chassis and make a mini V8, for a rat rod? I got to thinking about the adjustable suspension. It's technically on "bags"

[@GreenGeckoLegoTechnicWorkshop]

Yes I have already made a V8 hotrod. check out my other videos

[@Ak_1213]

You shoud make v14 with big cylinder and v 24 with smoll ones

[@Benzinilinguine]

Alright. We have reached peak humanity. A tiny turbo. Out of Lego. And it works.

[@mehersultana2476]

Awesome build.

[@thomascongrove6947]

Do you guys happen to offer any full kits including chassis? I saw engines and transmissions, but I'm not sure I'm competent enough to build my own chassis around them!

[@GreenGeckoLegoTechnicWorkshop]

Hi, we only have the Engine Kits and Gearbox at the moment. Thanks

[@ZachLobdell]

Glad you picked a ford out of anything

[@cedrik2806]

Super travail. Toujours un plaisir de voir de très belles choses en lego.

[@evanherriges4042]

this looks awesome

[@Schattiz]

Very cool! Had to sub, thanks!

[@RedWhite-m4c]

I support your store. I think it’s a great idea and I’d buy something from it

[@Netherdog7058]

so if you made a big enough engine could you use the exhaust to spin a small generator and use it as an alternator?

[@PixelG_]

Cool, but I have a suggestion. Can you add a little gas tank but for this case, it's an air tank and you can refill it every once in a while

[@GreenGeckoLegoTechnicWorkshop]

Yes I could of, if there was enough room in this hot rod. I will include a air tank in the car next time.

[@maximeclarisse8942]

Can you bluild a boat with air 😊

[@GreenGeckoLegoTechnicWorkshop]

Yes

[@maximeclarisse8942]

@@GreenGeckoLegoTechnicWorkshop thanks you

[@jamesfield5346]

Did you put the lobs for the camshaft at 120°from one another? Just wondering if that was the differences between angles.

[@diarrhea6344]

Next you should make it tow its own pressured air supply in a bottle or something like that.

[@AverageManUnitedFan1]

Bros got the car on life support outside 😂

[@DylanSharp_7]

You should be put th four speed automatic transmission in it😊

[@lightboii-hy2vg]

It sounds like an actual hot rod 😂 👍

[@bruderhans3813]

great! 😄👍 Would you like to build a car with an airride-kit ?

[@alexanderosipchuk8556]

Can you make a compressor out of Lego and power this car with it?

[@GreenGeckoLegoTechnicWorkshop]

Yes I could do

[@WakandaCat]

love this bro