Air Suspension Controller Install - Toyota Century G50 V12

Install video of the ASE662 air suspension controller alongside the H-076 wiring harness purchased from rhdjapan.com

[@Frxs7y]

Thank you so much i didnt know it went lower than 9

[@IsometricBacon]

Thanks for this tutorial. Was a big help doing mine. Can confirm the process is basically the same for a 2006 with a ASC680. Was a bit tight getting the connections into the computer though.

[@qc.century]

Glad to hear it :)

[@JuanDiaz-tu8kq]

How do you set it to NO?

[@JuanDiaz-tu8kq]

It looks really good - what are the steps if you just want to remove the air ride controller? Just unplugging everything, and the car will auto-adjust to its normal height?

[@qc.century]

Unplug the aftermarket controller and re-plug the factory connectors back in the factory computer yes. I can also leave the controller in and set it to "NO" in which case it doesn't do anything and defaults back to the factory height.

[@user-cx5jc6rq5w]

Do you have a link for this controller?

[@lpatierno84]

I have the ase664 in my 97 majesta and can't for the life of me figure out how to get it in special mode to go to super low 😭😭😭

[@thebigdirty34]

is it possible to only adjust the front or only adjust the rear? I want to drop the front a bit more than the rear

[@qc.century]

Yes it is. You can cycle through each individual bag to set a preferred height. But be advised the front suspension doesn't go very low. Overcoming that limitation requires cutting and welding. There is a physical limit where the spindle contacts the arch of the wheel well.

[@ramossilvino1]

I have a 97 century and want to do this to mine...do u have link fornthe controller and harness?

[@qc.century]

It's all in the description. Bought the harness from rhdjapan.com and the unit from eBay.

[@jaimiestroomer1107]

How do you tell which controller and harness you need? Just got a 1997 century

[@qc.century]

Took me a while to figure it out and i bought three different harnesses to figure it out. But i also have a 97 so ASE662 with a H-076 harness should work for you!

[@Chirus_]

@jaimiestroomer1107 afair (read some manuals) 1997 till 2005 uses the same controller and harness.

[@classicbikeenthusiast3595]

Mind me asking what number you drive it on?

[@lpatierno84]

I drive majesta on "no". Which is stock height.

[@qc.century]

I ride on "no", or 4433 when on a slick road with no potholes.

[@user-ow9ye8ih2f]

This is sick. Don't drive it this way in Montréal

[@qc.century]

I don't intend to... Wayyy too many potholes! Thanks for the support!

[@Onpointdrift]

Do you have an email I can contact you at about my century?