Check out the Art from the other side of this Tank - kzbin.info/www/bejne/iGjQqmaNib1jd8k
@jeffreyhildebrand35413 жыл бұрын
When i'm running the Paasche at.. 0.20 I can get some close and fine dots (my skill level) but I noticed you still had pretty good coverage when at a moderate distance. I have cleaned the airbrush COMPLETELY and still having the same issue.. I have thinned paint further and still no luck. Still getting flecks on my normal tip Paasche despite cleaning and a complete remix of paint with more reducer. #1, do you have any input. #2 I'd love to see a video on all the problems beginners face in one place. That would be awesome. I know there are some spread amongst different videos, but a single source where I can routinely watch/reference would be great. As always, great job. Though I cannot paint tanks for AWHILE, I love to watch the artwork and process.
@petecolone51254 жыл бұрын
I always say you can never have too many skulls. Great video my friend
@AirbrushAsylum4 жыл бұрын
Yes, me too lol 💀🤘🏻
@pennysavercashroyjohnson76752 жыл бұрын
You kilt it, I can already see the 3-D in that work right there , just wow, being a auto painter, I know it woulda been perfect under the clear DEEP . Great tutorial also, walking away saying MAN, so clean!
@CaravanFarms2 жыл бұрын
You amaze me! I am lucky to see your painting and learn from you! I am not new to airbrush but I am new to using it this way! Thank You!
@allanvarner5037 Жыл бұрын
I just got a airbrush system and I would love to learn how to do work like you do I think your work is awesome!
@Ladosligese3 жыл бұрын
All that is missing now is some 3d letters on buttom of the tank reading "oldschool" haha :D . looks so good :D
@wasupfool56924 жыл бұрын
Love your videos, no one anywhere close to me does airbrush classes.
@AirbrushAsylum4 жыл бұрын
Thank you glad you find them helpful 🙏🏻
@robmartin54144 жыл бұрын
I think skulls in snow drifts would be cool Carsten you have a good reference with snow in Victoria province this week ❄️🌬☃️ awesome blends between skulls and smoke
@AirbrushAsylum4 жыл бұрын
Yes, great idea and we sure have been getting some cold days here in Vic , thanks for the comment and glad you enjoyed the vid 👍🏻
@YootubeUK3 жыл бұрын
Masterful! I can only imagine the 8 thumbs down were for not seeing it lacquered! Really impressive and thanks for sharing.
@mattbishop77964 жыл бұрын
That is awesome! I’ve been wondering how to make my boring black tank look cool. Thanks!
@AirbrushAsylum4 жыл бұрын
Thank you glad you enjoyed it 👍🏻
@bjs0010014 жыл бұрын
I love these videos! Thank you so much for sharing your talent with us.
@AirbrushAsylum4 жыл бұрын
Thank you and no probs happy to continue to make these vids and glad you find them helpful 👍🏻🙏🏻
@Justatackit2 жыл бұрын
Damn that's some next level skill you have man! Your airbrush is amazing at the level of fine line procession it can do
@shaunclancy96864 жыл бұрын
Killer! Amazing! Definitely show the other side of the tank.
@AirbrushAsylum4 жыл бұрын
Thank you and appreciate the feedback re the other side , I think it’s gonna happen 👍🏻
@mattellison65074 жыл бұрын
I certainly Do want to see the other side of the tank being painted!
@AirbrushAsylum4 жыл бұрын
Awesome thanks for letting me know and the other side will be shown soon 👍🏻
@coloradogrownHD3 жыл бұрын
I think your better then a tattoo artist!
@patzrosete97204 жыл бұрын
I always want to do that. Thanks for all the tips! Great help. 👍
@berkc064 жыл бұрын
Amazing as always. Amazing details.
@AirbrushAsylum4 жыл бұрын
Thank you glad you enjoyed the vid 👍🏻💀
@maurinec.47844 жыл бұрын
Beautiful! Great work 👍
@AirbrushAsylum4 жыл бұрын
Many thanks glad you enjoyed the art and video 💀👍🏻
@Americanpatriot602 Жыл бұрын
Great work and video!
@michaelantalan69333 жыл бұрын
Im alwayas wacthing your vlog coz i want to learn how to paint like you..
@theflyinwop2 жыл бұрын
Outstanding !
@jamesobert89724 жыл бұрын
I dig it. Great job
@AirbrushAsylum4 жыл бұрын
Thank you 🙏🏻
@serbanmircea4493 Жыл бұрын
Absolutelly amaizing.Can you please tell me what compressor you use?Thanks
@ianhadden8594 жыл бұрын
Wow nice one mate👏😁👍
@AirbrushAsylum4 жыл бұрын
Thank buddy hope you are well 👍🏻
@adamakins97484 жыл бұрын
Quite the over reduction , I like to hear that . thats probably around mine cause yeah tip dry sucks
@mikecondoluci532 жыл бұрын
so cool awsome job man
@snaggletooth49333 жыл бұрын
SUPER!! ...LOVE IT!
@ramonorlandocapellanmoreta89184 жыл бұрын
Very good.
@AirbrushAsylum4 жыл бұрын
Thank you 🙏🏻
@printitpaintit.24364 жыл бұрын
Great work just wondering if your still using the battery powered airbrush compressor, if so rather than keep taking the valve connectors off you cm to attach it why not connect it to a quick release valve that way you can set it up and change airbrush.. Just an idea because I was going to pick one up for outdoor work :-)..
@AirbrushAsylum4 жыл бұрын
Haven’t played with it for a little while but will create an artwork tutorial soon using one....I did try the quick connect but it doesn’t work with the battery unit 😞
@PENFOLD19624 жыл бұрын
I really enjoy your video's. Are there examples of references included with the skull stencils?
@AirbrushAsylum4 жыл бұрын
No the templates just come ‘as is’ but adding reference is a great idea I’ll keep that in mind for my future stencil releases 👍🏻🤔
@donald79534 жыл бұрын
☺👍nice and a good weekend
@AirbrushAsylum4 жыл бұрын
Thank you 🙏🏻
@novicefisherman4358 Жыл бұрын
Do you apply the smoke after you painted your tank, before the clear coat? Wondering if you have a time limit
@rossansbro93394 жыл бұрын
Looks like you enjoy the PS 770 👍💀👌
@AirbrushAsylum4 жыл бұрын
Yes , it’s a fantastic brush and for the price a bargain 👍🏻
@valtereklund17314 жыл бұрын
Do you have a rule of thumb for thinning and air pressure? You mentioned 30/70 paint/thinner @ ~20psi for the really fine details. How thick and at what pressure do you go for the coarser work?
@kevinliewer86763 жыл бұрын
What airbrush are you using for your fine detail? Thank you!
@lincolnjohns15333 жыл бұрын
Hey man. Just wondering about preparation of the tank. For example I've been given a black tank that's ready to go. If I were to go and do this too it, do I just give it all a light sand with 600grit, clean it and then begin painting? And then after the art work go ahead and clear? Is that your process?
@MrDeano-eu9rg2 жыл бұрын
Are you from Melbourne mate?
@jimmylowejr65834 жыл бұрын
Real amazing thank you
@anthonyrico3293 Жыл бұрын
How much to do that on my tanks and something similar on the fenders
@AirbrushAsylum Жыл бұрын
I don't take on commissions anymore, however I used to charge approx $800 - 1000 per mural (around A4 size) so most bikes would cost around $3000 and up plus prep and clear.
@rogeliodesantores21013 жыл бұрын
sir, what kind of topcoat do you use? waterbase or automotive urethane?
@Charlie-Sax3 жыл бұрын
very fun!
@zardportugal4 жыл бұрын
Amazing.
@lovetolearn52534 жыл бұрын
Awesome job, I hope with in the next year I'm doing tanks or hoods. I'm the person that sent you a email with the 2 pics. I have a question if you don't mind. I was airbrushing and all the sudden big shots of water came out of the gun. It ruined my art work and did it for around 15 to 20 mins off and on. I was maaddd. Also it would have little burst of paint. I was running a fine line and all the sudden it looked like I went full throttle, but I was barely on the trigger. I bought a 180$ airbrush kit 4 days ago and it came with a little compressor. Would that be my issue the compressor? It has a water filter but it's seems like a lot of water. I have 2 other compressor 33 gallan and a 20 gallon, should I run that instead of the little liter one. I know nothing about the set up and how it flows together. I was worried that the other compressors were to big and could cause damage to my seals in the gun. I don't think it's the gun because today I bought the eclipse for 160$ and it does the same thing as before. Any help would be appreciated. One more thing to make thin lines is it better to run low psi(18 to 20) and more reducer (65% reducer) or higher psi(30 to 35) and less reducer (30%).
@johnnyharless5703 жыл бұрын
What size tip & needle r u using on the black
@AkarinRommaneeyangkoon4 жыл бұрын
Look nice
@patriciakelly95592 жыл бұрын
Acrylic polyurethane or oil?
@chazzsarangaya4043 жыл бұрын
What kind of paint you use master?
@naimtayeh40653 жыл бұрын
Kindly what kind of paint you are using??
@RafaelMeneses.3 жыл бұрын
WHICH COMPRESOR AIRBRUSH YOU USE IT ?
@johnnyharless5703 жыл бұрын
R u using 1shot paint 🎨
@liamgannan70754 жыл бұрын
What airbrush paint you use for automotive
@AirbrushAsylum4 жыл бұрын
I use Trident Waterbased airbrushing colours 👍🏻
@rolandristits10633 жыл бұрын
Top👍
@gaquesad3 жыл бұрын
Just take all my money!
@BTKoldDeuce19473 жыл бұрын
The sweet men desirably rock because key chemically start astride a plastic carpenter. agonizing, stupendous chain