Started airbrushing for the first time today and I'm really happy I watched this, I had some splatters when starting again, now I will have much better results. 🤓👍🏻🙏🏻
@AirbrushAsylumСағат бұрын
Thanks for your comment and glad it helped and welcome to airbrushing 👍🏻👍🏻
@eight-dg3oz7 сағат бұрын
does it work with any solvent base coat
@AirbrushAsylum52 минут бұрын
Yep it sure does 👍🏻👍🏻😉
@mikejunge57978 сағат бұрын
that was nize , bring some flying sparks in , kind of little sparks infront and the back ... some smoke ... - but itz ok for a new firestarter
@user-os6ox1sy1iКүн бұрын
do you sell those stencils to do efect on skulls as a real bones??
@BrazpastropКүн бұрын
Anything from Iwata is good! I have the Revolution CR wich is the gravity feed version and actually it,s my workhorse.
@sscfc12 күн бұрын
So base coat only...why
@sscfc12 күн бұрын
That paint looked too thick
@bernardmcnamara3 күн бұрын
🇦🇺🙂
@AirbrushAsylum3 күн бұрын
Cheers buddy 🇦🇺 🤘🏻🤘🏻
@joseaugusto-vd9vg3 күн бұрын
My first airbrush os like This
@AirbrushAsylum3 күн бұрын
Yes me too , my first brush was a Paasche VL also siphon feed 👍🏻
@joseaugusto-vd9vg2 күн бұрын
@@AirbrushAsylum hi have a paasche tho its possível thah you make a reviw?
@mikec.96773 күн бұрын
Excellent review...Thanks!
@AirbrushAsylum3 күн бұрын
No probs thanks for your comment and glad you enjoyed the vid 👍🏻
@rak_na_gore_svisnul3 күн бұрын
Paashe MVLS is 💩
@AirbrushAsylum3 күн бұрын
I had one of those years ago and didn’t mind it however I do prefer my iwata’s 😉👍🏻
@rak_na_gore_svisnul2 күн бұрын
@@AirbrushAsylum Olympos PB 206💪🏻
@andregrafia19143 күн бұрын
Excelente série revolution
@AirbrushAsylum3 күн бұрын
Yes 100% they are great for the price 👍🏻😉
@AirbrushAsylum3 күн бұрын
🔥 Which Airbrush Should I Buy ? - kzbin.info/www/bejne/lXzRq4KuedWUpMk
@webdronez5 күн бұрын
Iwata is lagging on keeping up with the competiti9n like HS which now i thnk HS and its German quality is not above and way beyond Iwata. I do love my Airbrushes IWATA's But im thi8ning of moving over to HS This brush is prob the only one i dont have from iwata.
@AirbrushAsylum4 күн бұрын
Thanks for your comment and I hear you …I need to have a bit more of a play with H&S as when I tried one a few years ago, I loved the quality and how smooth it felt however I noticed a slight trigger delay which made it hard for me to get used to as iwata and Creos are instant as soon as you pull back on the trigger. That said, it may have just been that particular brush ?? I am keen to know if anyone else has had a similar experience 🤷♂️
@xtremecutz5 күн бұрын
nice to know.. the difference thanx ....you are talking about pre mixed blue paint,, does that mean the trident paint is deluted by you?
@AirbrushAsylum4 күн бұрын
Thank you glad you enjoyed the vid and yes the trident paint was pre thinned with their reducer at around a 1:1 ratio 👍🏻👍🏻
@xtremecutz4 күн бұрын
@@AirbrushAsylum thanx 🙏
@adamsroy27025 күн бұрын
Hi I would like to kow if you have a payment plan.
@AirbrushAsylum4 күн бұрын
Hi there you should be able to do a ‘pay in 4’ with PayPal if it doesn’t let you then please get in contact and we will try and work something out for you 👍🏻🤞🏻
@NaTochka_Ukrainochka6 күн бұрын
Vielen Dank!!!!)
@AirbrushAsylum6 күн бұрын
Bitte schon 👍🏻👍🏻😉
@fredflintstoner5967 күн бұрын
Mrs Richards: "I paid for a room with a view !" Basil: (pointing to the lovely view) "That is Torquay, Madam ." Mrs Richards: "It's not good enough!" Basil: "May I ask what you were expecting to see out of a Torquay hotel bedroom window ? Sydney Opera House, perhaps? the Hanging Gardens of Babylon? Herds of wildebeest sweeping majestically past?..." Mrs Richards: "Don't be silly! I expect to be able to see the sea!" Basil: "You can see the sea, it's over there between the land and the sky." Mrs Richards: "I'm not satisfied. But I shall stay. But I expect a reduction." Basil: "Why?! Because Krakatoa's not erupting at the moment ?"
@AirbrushAsylum5 күн бұрын
lol thanks for your comment 😉😂
@MegaBondagemon7 күн бұрын
Are you restricted to stencils and other obstructions like masking tape to get the shape you want for airbrushes?
@AirbrushAsylum5 күн бұрын
No, stencils are great for getting a basic design on the surface you are painting or creating sharp edges as well as textures, that said you can also freehand with your airbrush and I think a mix of both is best 👍🏻😉
@tomsawyer2477 күн бұрын
Very nice
@AirbrushAsylum7 күн бұрын
Thank you 🙏🏻
@torydz7 күн бұрын
I do airbrushing on cars. I've used the Sears Model 364-15506 airbrush for over 40 years. You can mix just as much paint as you need. If you use a traditional spray gun or even an aerosol can, you have a large spray pattern of like 6-8 inches for a tiny 1/4 chip. With an airbrush, you have precision control and can actually get to the point, with a little practice, where you can perfectly fill in a tiny scratch with no masking and little to no overspray. With acrylic lacquer, the paint goes on very thin (with a 50/50 paint to thinner ratio) so you have to hit it several times. But with the airbrush, putting down multiple thin coats is very easy and clean to do. Just like in the video, it's important to get an airbrush that has variable paint output. Kind of like a variable speed drill. With the adjustable airbrush, you pull the trigger back to increase the flow of paint. A lady I know is so precise, she can airbrush intricate designs on ladies' fingernails. It's good to practice with water-based paints on scrap material first. Before you know it, you'll be an old pro! Great video!!
@AirbrushAsylum5 күн бұрын
Thank you so much for sharing your info on the brush you use and you summed it up well. All the very best from Australia 🇦🇺 and glad you enjoyed the vid.
@torydz4 күн бұрын
@@AirbrushAsylum I didn't realize you are in Australia. What a wonderful and beautiful country! I'm in the U.S.
@tammyali7 күн бұрын
❤ creativity ❤
@AirbrushAsylum6 күн бұрын
Thank you 🙏🏻
@MegaChallanger7 күн бұрын
This brand of paint is very difficult to find online
@AirbrushAsylum5 күн бұрын
Jump into the description I have a link there, if you can’t get trident then I also enjoy using Createx illustration colors 👍🏻 hope that helps .
@paulstone4727 күн бұрын
The cutout has another use. Some people, if their airbrush is showing signs of clogging, use the cutout to grab the retention nut and pull back on it, withdrawing the needle, and then release it, letting it snap back. This can sometimes resolve a spraying issue. I don't do it, and I'm not saying it's useful. I'm just saying I've been told that this is what some people use it for.
@AirbrushAsylum5 күн бұрын
Yes 100% it’s a very common use for the cutaway, I also don’t use it for that but I’m sure many use it for that purpose. Thanks for sharing 🙏🏻👍🏻
@Ivy-ne9zw8 күн бұрын
I’m gonna be throwing a party later this year and have a T shirt decorating table. I will only need the airbrush “kit” for one day. Do you have an affordable recommendation that will make it through one afternoon of heavy use?
@AirbrushAsylum5 күн бұрын
I do love the iwata eclipse HPCS or BCS if you want a suction feed instead however they are not that cheap. You could also look at the revolution HP.BCR (suction) or CR (gravity) they are also great for heavy use . Other than that a Chinese brush like gaahleri ghad-68 will work or you could look at the Taiwanese sparmax brushes. Hope that helps 👍🏻👍🏻
@ELPADREAIRBRUSH8 күн бұрын
Awesome video buddy I’m going over right now !! 👍🏻👍🏻!
@AirbrushAsylum7 күн бұрын
No probs thank you 🙏🏻 feel free to use the coupon code ASYLUM25 to grab 25% off the course for a limited time 👍🏻🤩
@ramongibbs86928 күн бұрын
Thanks for the very informative video. Wouldn't it be also practical to clean the inside of the plunger shaft?
@AirbrushAsylum5 күн бұрын
Yes, you most definitely could glad you enjoyed the vid 👍🏻
@AlexMartens-mj2uh8 күн бұрын
I just started to airbrush. It came with a small black compressor. But when I try to make fine line's or whatever it always leaves a splatter when I stop. What I'm a doing wrong??
@AirbrushAsylum5 күн бұрын
You may be getting moisture in your line take a look at this video which should help 👉🏻 kzbin.info/www/bejne/larCXnmDqbydZ9Usi=JbO59WuUUD0fPSII
@bernardmcnamara9 күн бұрын
The reason for the difference in cat's pupils. Vertical pupils appear to maximize the ability of small animals to judge distances of prey. This is why domestic cats have vertical-slit pupils and their larger brethren, lions and tigers, have round pupils.
@AirbrushAsylum8 күн бұрын
Fantastic, thanks so much for sharing 🙏🏻
@destinationunknown66659 күн бұрын
2:50 You're welcome :)
@ydrat20059 күн бұрын
Merci
@AirbrushAsylum8 күн бұрын
Thank you 🙏🏻
@maresabradley48109 күн бұрын
Can it be used without a lid?
@AirbrushAsylum8 күн бұрын
Yes it can 😉
@maresabradley48108 күн бұрын
@@AirbrushAsylum . Thank you. It's for a cake pme airbrush. I bought it second hand online and it came with the lid missing. Tutorials say it can't be used without the lid. So I was afraid to try it.
@AirbrushAsylum8 күн бұрын
@@maresabradley4810 no the lid is really only there to protect from dripping paint out of the colour cup, hope that helps 👍🏻😉 you can also purchase replacement lids if you feel that you need one .
@maresabradley48108 күн бұрын
@@AirbrushAsylum . Thanks a million. I contacted pme a week ago and never heard back from them. I'll go ahead with a little and see how I go.
@Pointless-fishing-adventures10 күн бұрын
This is the airbrush I bought. I also have a revolution with the .5mm needle nozzle that I used for larger areas. I'm currently working through your course.
@AirbrushAsylum8 күн бұрын
Great to hear you have this airbrush and the revolution is also a great brush, I actually have a video coming out soon featuring the iwata hp.bcr , hope you are enjoying the course all the best 👍🏻👍🏻
@lesthiele492110 күн бұрын
Another great tutorial, I use my airbrushes for spraying model kitsets, it would be great if you could either give some hints on this or do one episode of spraying kits, I have two Iwata airbruhes and find any issues is down to my usage, bext regards from a Kiwi living in Melbourne, Les
@AirbrushAsylum8 күн бұрын
Thank you appreciate the comment and suggestion and glad you enjoyed the vid 👍🏻 hope you are enjoying Melbourne life, New Zealand is one place I would love to visit in the future, it looks incredible 😉
@tdoheron10 күн бұрын
Wow! A ball point airbursh!
@AirbrushAsylum8 күн бұрын
lol 😂 yep close enough
@TheSatekroket10 күн бұрын
Beginner with airbrushing,great channel,learn a lot!
@AirbrushAsylum8 күн бұрын
Welcome and thanks so much for your kind words and glad you find the channel helpful 🙏🏻
@gaetanoesposito65810 күн бұрын
Ciao. Apprezzo molto tutto quello che fai e ti ringrazio. Avrei una domanda: quale è la differenza sostanziale tra i colori Createx Illustretor e Createx Airbrush Color? Grazie se vorrai rispondermi.
@andregrafia191410 күн бұрын
Excelente ❤
@AirbrushAsylum8 күн бұрын
Thank you 🙏🏻
@bernardmcnamara10 күн бұрын
To me there seems to be a big difference between the two airbrushes. Good to see Boba Fett's helmet in the background. I've enjoyed watching nearly all the Disney Star Wars scrips on line...
@AirbrushAsylum8 күн бұрын
Yes, the micron can go finer but really only just and like I mentioned most wouldn’t need a brush to go much finer than the HP.B plus 😉 love Boba was always my fav back when I first saw him in Empire (I never saw the holiday special from 1978, which is actually where he first appeared)..🤘🏻🤩
@anfieldroadlayoutintheloft520410 күн бұрын
good vid thanks four you cool vids on channel
@AirbrushAsylum8 күн бұрын
No probs happy you enjoyed the vid 😉👍🏻
@rak_na_gore_svisnul10 күн бұрын
Creos 770/771❤🎉😊
@AirbrushAsylum8 күн бұрын
Yes, I love my Creos’s 👍🏻😉
@StevenLeahyArt10 күн бұрын
I love all the B series brushes!
@jc220010 күн бұрын
That’s some airbrushes I got the itch on getting! Was thinking trying some at some point! 🤭the custom cm b is calling me 😂 cheers Steve!!
@AirbrushAsylum8 күн бұрын
Yes they are definitely a great choice for anyone who wants a quality detail brush 👍🏻
@AirbrushAsylum8 күн бұрын
The CM.B is a great micron choice 👍🏻 you won’t be disappointed 😉
@sci-fi.tsunami10 күн бұрын
TIP #1: "Whatever works for you!" *LMAO!*
@AirbrushAsylum10 күн бұрын
Yep 👍🏻 😂
@sci-fi.tsunami10 күн бұрын
This video is wrong! The *MOST IMPORTANT* tip is to rinse/clean the paint out after every use. DO NOT let the paint dry in your airbrush. If you let the paint dry in your airbrush every other tip is completely useless.
@AirbrushAsylum10 күн бұрын
lol….you have a valid point 🤔😂
@craig486710 күн бұрын
STARVING ARTIST Don't exist on KZbin and this guy is an example of that, 21 + million views 💰
@AirbrushAsylum8 күн бұрын
lol 😂 thank you appreciate the comment 🙏🏻
@craig48678 күн бұрын
@@AirbrushAsylum . Keep raking in that money 🤑, it beats working 10 to 12 hours a day doing roofing in the blistering Sun 🌞 and coming home Dead tired!
@chuckhepler415711 күн бұрын
I like the way you continually explain what you are doing as you go. Quite helpful. There are no mistakes, simply opportunities to be creative Thx
@AirbrushAsylum11 күн бұрын
I appreciate that, glad you are finding the videos helpful 🤩
@chuckhepler415711 күн бұрын
Your warmup is nicer than my finished product. Absolutely love your videos. Just watched two today. Thanks for your amazing help and advice
@AirbrushAsylum11 күн бұрын
lol...thank you 🙏🏻 appreciate your comment and glad you are enjoying our content.
@ELPADREAIRBRUSH11 күн бұрын
Hey buddy I need a professional opinion I’ve been seeing a new thing about getting spray paint and piercing the can and getting the paint out and they are saying you don’t even have to thin it it’s ready right out of the can ! But you know and I know we spent a lot of money on our airbrushes and micron and TAKUMI and I’m just worried about the O rings and the nozzles ? I mean will it be detrimental to a nozzle or O rings what do you think? Have you heard about this new hack ??
@AirbrushAsylum11 күн бұрын
Hey mate, thanks for your question and I have heard of it but haven't personally done it, I just prefer to buy 'airbrush ready' paints meaning either Trident or Createx (waterbased) or DNA, House of Kolor etc for urethane paints. The iwata's do have teflon seals so you are fine to run urethane based paints through your brushes, but that said I probably wouldn't use the aerosol paint in your micron, perhaps have a 'cheaper brush' that you can use to try it out. 😉
@ELPADREAIRBRUSH10 күн бұрын
@@AirbrushAsylum thank you my friend for the advice ! I have a master airbrush I use for larger coating it has a 0.5 nozzle and I use it for when I want to turn a white canvas black along those lines I might try it but I have so much paint I’m good for awhile so I don’t think I’m gonna do it ! Cause why I don’t need to do it so why should I ? Thanks again Marc 👍🏻👍🏻!
@Jimmy-sb3fc11 күн бұрын
I have several airbrushes that don't have any markings at all. How do I measure them to determine what sizes they are? Thank you!