Airbrushing a Lucky 13 Skull using AirShot Stencils

[@AirbrushAsylum]

Check out more videos using AirShot templates 👍🏻 kzbin.info/aero/PLkd3s0ymmV0Onqr8k55yfFeqmHVYMlCyO

[@audiemuniz6445]

You can make your own! Easy

[@thorout8377]

Would you do a custom job on my 2021 Harley Davidson Breakout?

[@inkslinger6156]

I’m a beginner at airbrushing but I see that I’m not to bad. Your tips helped me a lot. I been drawing and tattooing since the 90’s. Please keep up the great work.

[@TECHBEATZ1200]

Every stroke gives the painting its own uniqueness while bringing it to life. I can see pictures within pictures. Very inspiring. Thanks!1

[@thomaskirkpatrick4031]

It fascinates me to watch someone with artistic talent, I've wanted to do airbrushing ever since I was a kid. I happen to be one of those people with no talent for artistry. But I love to watch. Great job.

[@Iswhatitisssss]

Learn the basics, practice. Use references. You can be self taught mate, it might not come naturally- but you can create art which eventually will become better than amateur. Just keep at it. Same as anything really.

[@terrencewilkes7263]

Love your work. I could watch your tutorials forever. It seems that art in many forms has a very calming effect on me but none like yours. Thanks for sharing.

[@AirbrushAsylum]

Wow thank you so much for your kind words really glad you enjoy the art and vids 👍🏻

[@68AMW]

Not a great fan of skulls, but your technique and patient recording and explaining is all that matters - GREAT job dude, thanks a lot for sharing your talent!!

[@TwoFingeredMamma]

Yeah, it's all a bit Masonic isn't it. Don't forget the 13, a sacred number to Freemasons and the one eyed symbolism too.

[@billofalltrades1468]

I think this is my favorite one ! I've been watching you for years and always learning from every video.

[@Mitchymitch93]

I love watching your videos I find them so soothing

[@AirbrushAsylum]

Thank you glad you enjoy them 👍🏻

[@jeffdeluca1153]

Your talent is quite obvious as I watch and see the 3D come to life before my very eyes! Lots of brush time no doubt.

[@AirbrushAsylum]

Thank you So much really appreciate it glad you enjoy the art 🙏🏻👍🏻

[@jeffdeluca1153]

@@AirbrushAsylum I'm trying my best to get good airbrushing... getting that fine control will take practice and lots of it

[@JackBQuick79]

U see, this is the kinda video i watch while im stoned. Life is good and art is proof.

[@kumaresanisha3509]

Very nice work bro

[@AirbrushAsylum]

Thank you so much 😀

[@pfalzkind_on_street6067]

You make it Look so easy, thanks for sharing.

[@AirbrushAsylum]

thank you so much 🙏🏻 humbled by your comment

[@michaelharris2997]

That is a great looking stencil and some awesome airbrushing skills.

[@AirbrushAsylum]

Many thanks really appreciate the kind words 👍🏻

[@AvtarSingh-ey1my]

Absolutely amazing work

[@timcalhoun6465]

Thx for these. I hope to regain needle control and build upon it.

[@clausfrennessen2362]

I want more!! Bang on! Love and respect. Fan Sweden 🇸🇪

[@AirbrushAsylum]

Thank you so much glad you enjoyed the vid and here are more tutorials using AirShot stencils 👉🏻 kzbin.info/aero/PLkd3s0ymmV0Onqr8k55yfFeqmHVYMlCyO

[@fpvrcstuff]

Great job, I may have to give this one a try. Thanks for the Tutorial. Cheers

[@AirbrushAsylum]

No probs, thanks for your kind words 👍🏻

[@janettaselaar5673]

Awesome work! love the stencil, so much detail awesome!

[@AirbrushAsylum]

Many thanks 🙏🏻

[@deigo2629]

Mesmerizing to watch

[@AirTodd]

Nice looking work as always.

[@AirbrushAsylum]

Thank you 🙏🏻

[@Richard-jy6nt]

Essa é mais uma das muitas artes sua que ficou linda 💀👏🏾👏🏾👏🏾👏🏾

[@AirbrushAsylum]

Thank you 🙏🏻

[@bikerbobschoppers]

Well done

[@John-mp6uu]

Love the tutorial good , gotta charge my phone now , funny

[@shanebowles4854]

Love it mate

[@AirbrushAsylum]

Thanks buddy 👍🏻

[@eddierodriguez419]

New sub here & just love the detail u explain soooo satisfying

[@brianfitnessetc2848]

Excellent work. I would say the 13 is shaded in reverse. Light is coming from top right, therefore the 13 should grade darker on the left. Still great, though

[@louisliguore7199]

Another great video, thanks for doing them. When you are detailing in the video it appears that you hold the airbrush at an angle to the artwork, if that is true, what is the angle? I try to paint perpendicular to the surface, and I get a lot of splatter.

[@michaeldeslippe8054]

Three quick questions: 1) what template did you use for the background pattern, and, 2. did you airbrush the Paynes Gray, brush it or roll it? and 3. did you use the Paynes Gray from a tube, bottle or some other mix (brand?). Your tutorial is great I'm planning on trying this one to get my hands dirty for detailed artwork. I've been watching dozens, perhaps hundreds of videos on airbrush artwork. Many are great, even terrific, but none has your very eloquent and thoughtful presentation and this one caught my interest as so complete I can try it to get a finished product. I figure a couple dozen scraps before I can produce something acceptable, so I'll start on artists paper and move to canvas when I'm sure I can complete the piece.

[@mrmorgan4730]

Not hating.. Over all this is a good piece.. Just one thing,, the light source on the hat is coming from two ways,, down the right side on the hat,, then on the left side of the number.. but where your light should hit the number 3 you put shade.. little things I know.. keep up the good work..

[@karim74ita]

I’m Loving your artworks and your lessons. You’re very inspiring however I don’t even know if I want to start airbrushing. It would be perfect to try before buying everything. I have a question, I saw that you need to change color pretty often. How do you manage that? Do you clean every single time the airbrush (for example needing white) or do you use more than one? How long did this take in real time? Thank you

[@jhildebrand329]

What airbrush do you use. I ordered a Iwata cs Medea. I think that'll be good, but I'm not an expert. I'm also very interested in painting my m/c helmet. Yje videos I have found are using large automotive sprayers. Very impressed with your work.

[@AirbrushAsylum]

The Eclipse HP.CS is a great all round brush, which will serve you well for years and years of airbrushing, check out this video which better showcases it 👉🏻 kzbin.info/www/bejne/oXfPY2WHac57hNE

[@wraithsrath7310]

I enjoy your art and was looking at some of your other templates for a project I am working on. I am doing a military tribute motorcycle for my son and was looking at your Infantry Skull template, is it as flexible as this template would love to put this on his tank with some background art. Keep up the great work it has helped me take my hobby to the next level.

[@klientklient9526]

Fantastic! 👍👍👍👍👍

[@AirbrushAsylum]

Thank you 🤘🏻🤘🏻🤘🏻

[@katerynabereziuk6382]

Hello, thank you for you videos ! İ do custom with clothes and wanna try with airbrush , never tryed it before and im so exşşted to try. Have question about paints , i can use good airbrush for paintin on wall , textile , canvas or shoud take different brushes ?

[@mfmhydro6274]

Great video..... Thanks again Sir 👍👍👍♠️♠️🤞🤞

[@AirbrushAsylum]

Thank you 🙏🏻

[@RubberSmuggins]

You could overlay the finished painting in the corner so us noobies can see why you are laying down the diffent colours. Cheers for the tutorial.

[@AvtarSingh-ey1my]

Beautiful ❤

[@stevecourtneyscalekustomz2602]

Great video

[@AirbrushAsylum]

Thank you 🙏🏻

[@paintreno8946]

How your spray line comes so clean and no over spray ???

[@LeslieSmith-vw3hd]

I’m thinking transportation yellow over the green

[@adventureswithrwgoeasy9325]

Greetings from Texas! I am just starting on airbrushing and I was wondering how much you would sell artwork like this for so that I could get a general idea on price range once I get more experience. Thank you for you time and please keep making awesome videos like this.

[@timothyvanas6413]

I can't get that fine spraying tell me how you do it

[@mikejunge5797]

im thinking of the prize nobody couldnt spend - this time and heartblooded fun you bring up to every picture ... Somebody would pay 25 dollars or another one 75 - i think itz 150 dollars worth or much more ,hmmm

[@jeffdeluca1153]

Also. Do you vary the air pressure with the trigger for closeup detail?

[@AirbrushAsylum]

No the air pressure remains the same I control the amount of paint that comes out using the trigger 👍🏻👍🏻

[@timothyvanas6413]

What can't I get that fine spray with my brush is the psi too high please tell me because you are amazing brother what am I doing wrong

[@clayton2746]

im trying to find the lucky13 skull template in the US i can't find one ..

[@3218675309]

Why not turn the canvas with the corner at the top (diamond) so you can fit the entire figure?

[@AirbrushAsylum]

Yes, I did think of that ....but I wasn’t too phased that it chopped a little off, and it’s easier to display these pieces when going to shows , as I can’t always hang them 😉👍🏻

[@timothyvanas6413]

I tried to do the fine lining you are doing but my brush just does not allow me to this

[@berardinofrancavilla3456]

Cosa hai usato per trasferire il disegno? Diluente sintetico?

[@robmartin5414]

Are these new stencils don’t remember them on the air shot website love seeing new work Carsten

[@jordanjones2046]

I don't remember seeing this stencil either... I'm going to have to go check. It's pretty bad ass!

[@AirbrushAsylum]

Thanks glad you love it and here is the direct link if you are keen 😉 airshotstencils.com/products/biker-11?_pos=1&_sid=9a98f523c&_ss=r

[@AirbrushAsylum]

Thanks for your comment glad you enjoyed the vid 👍🏻

[@Leandrosilva-vv4dv]

Show 👋👋👍

[@ianhadden859]

Sweet mate I really love this one are you going to stock this stencil?? Came out fantastic👍👍

[@AirbrushAsylum]

Hey mate , I am stocking this one you can check out our total range via the following link : www.airbrushasylum.com.au/store/c94/AirShot_Stencils.html The Lucky 13 sold out very quickly so I will be re ordering soon 👍🏻

[@BentAreFredstad1972]

Just love youre vids🤙😊 do you ship to Norway?

[@benblankenship5892]

Hey Carsten, quick question, what can I use to draw a design out on to canvas or whatever I’m painting on? I’m currently using chalk but don’t really like it lol it can be aggravating. Thanks man, once again great tutorial!

[@burnout9069]

White charcoal pencils (wax free). Lead (graphite) pencils are common or water colour pencils even.

[@AirbrushAsylum]

Hi mate I use a chalk pencil ‘oil free’ by a company called generals hope that helps 👍🏻

[@cuttzysbs4416]

Mate your work is very inspirational, i love it Can you help me, i am trying to order paints on your website but can't get passed shipping method?

[@josephsantos145]

hello sir can you pls give your list of mechanical tools using air brush project..

[@elnegaard82]

Hi! I really like your videos, that gives so much to some New in game like me. Where can i find some of the 10 ml. Bottles just to try the trident? Here we only have the bigger ones from 50 ml. And up🙂

[@AirbrushAsylum]

I would check on amazon or eBay you should find something similar on there 👍🏻 glad you enjoy our videos thank you 🙏🏻

[@thewizdad]

Question: How is it we cant hear your compressor? My iwata neo is very loud.

[@matjeay7224]

sweet job..can u show us how to get better air brush for flags..?

[@ltmphotographydesigns]

Can I ask the pros and cons to gravity fed and siphon fed airbrush guns?

[@AirbrushAsylum]

Gravity feed are fantastic for all types of airbrushing , siphon feed are better if you are a T-shirt artist or large muralist who needs more paint and the ability to switch between multiple colours . 👍🏻🙏🏻

[@randyanderson6110]

Would you have been able to achieve similar results using a .35 needle?

[@AirbrushAsylum]

Yes , you definitely can it’s all in how you reduce your paint : kzbin.info/www/bejne/n5rTmpuur9SNisU Hope that helps 👍🏻

[@randyanderson6110]

@@AirbrushAsylum what other brand of paint would you recommend? I'm in the US and cannot get Trident paints. Thanks.

[@MrFurion01]

Hi, really want to try air brushing, can anyone recommend a good value starter set and what paint to get? Thanks in advance 👍

[@AirbrushAsylum]

I would recommend either the HPCS eclipse or the PS.289 which is available through SprayGunner using the following (affiliate link) meaning we receive a small commission for any qualifying sales 👉🏻spraygunner.com/gsi-creos-mr-airbrush-procon-boy-ps-289-0-3mm-platinum/?aff=9

[@AirbrushAsylum]

In regards to compressor I would say IS875 iwata and paint either Trident or Createx 👍🏻👍🏻

[@markmcintosh6968]

Is it possible to make a fluorescent color?

[@carmaaa8508]

Hi, where can I get these templates ? I really like this one. Please let me know ?

[@ThanhNguyen-bg1jg]

Mấy miếng ghép là miếng gì vậy bn

[@strannikiRU]

Посмотрел как художественный фильм😇

[@justinbooth489]

What size needle do you use for projects like this?

[@vickyshan3727]

Hye...,im from.malaysia...im intress woth your stencil...can i buy from u

[@user-mx4oq4gy1e]

Please tell me which airgraph you're using?

[@scotthunter4120]

Where do I buy those patterns or the Stansell Netflix crazy I love it

[@AirbrushAsylum]

Thank you so much for your comment jump in the description for links to all products used 👍🏻 you can also buy the template direct from airshotstencils.com

[@audiemuniz6445]

You can make your own easy!

[@claudiagantenbein6018]

👍👍Sehr schöne. Super Kanal 👍

[@AirbrushAsylum]

Veilen dank 🙏🏻👍🏻😉

[@bobchandler6678]

I Am from the UK but where can i get this template from.

[@salvadorcortez8564]

We don't make mistakes only happy clouds is what bob Ross would say. What's your saying for mistakes?

[@AirbrushAsylum]

Lol, that’s definitely accurate, mistakes will happen, generally they can be fixed, hide them in shadows or under texture or turn them into something else which fits in with the design also works. Gotta love Bob Ross what a legend 👍🏻

[@patruddiman4228]

Have you thought about doing a video painting a baseball

[@AirbrushAsylum]

No , but that’s a great suggestion thank you 👍🏻

[@IronMan-yg4qw]

nice work. no links to airshot stencils tho.

[@AirbrushAsylum]

Thank you , take a look in the description below the vid, all templates are listed in there about half way down ...hope that helps 👍🏻

[@IronMan-yg4qw]

@@AirbrushAsylum oh sry i missed it.

[@timothyvanas6413]

What psi are you working at here

[@magnosouza9056]

Bom dia! Qual é a sua pistola?.

[@AC-pu8tx]

What Air brush is that

[@diamonking5272]

Wats the brand of the airbrush kit

[@AirbrushAsylum]

The one shown here in the thumbnail is a PS.770 GSI Creos , there will be a link to products used in this video in the description 👍🏻

[@xbeast666]

Do u sell the canvas boards???

[@fortunatolegato2206]

Che ago usi sei il top

[@mervhoward5821]

Words fail me…. If only I could….

[@Craftoscarperezofficial07]

這很棒 🤙✌️😉😎🎨🖌️🐲🐉☯️

[@jamesbanjomanjohnson]

whats the need of painting the black lines all around the 13 than going right back and painting the whole thing white again? i dont understand you are wasting paint??

[@JK-dj1zj]

Hey Santa Claus! lol

[@strannikiRU]

Очень классно! Подскажите ссылочку, где такие прикольные трафареты можно купить

[@clayadrian]

I understand that this is an incredibly detailed video but to a beginner like me,its damned long beautifully done (I'd hang it on my wall) but still long

[@AirbrushAsylum]

Thank you , totally understand it’s hard to find a balance where the video is detailed enough but not too long, I am thinking of adding video chapters so that you can easily navigate our longer content. If you want shorter timelapse vids then head over to our Instagram 👍🏻

[@adammoran7849]

Someone needs to invent a red dot for airbrushes.. js

[@bjrrr339]

BRUH

[@Craftoscarperezofficial07]

🤙✌️😉😎🎨🖌️🐲🐉☯️