AirBuddy bidirectional amplifier is amplifying anything!

I think that if you want to use it with Lora, you need a SAW filter!
in this video i want to show that this amplifier is detecting the traffic that my phone is having over Wifi AC(5.8ghz)!
PS: in receiving state, should be a green LED on, but my green led is burned!
Link to buy:
a.aliexpress.c...

[@Nian...]

I'll use my 60 euro cavity filter then 😅👍 Thank you Daniel for the update 🙏

[@david_post_punk]

Where to get cavity filter for 60€?

[@SuperTubeaddict]

@@david_post_punk aliexpress

[@robertVandelanotteonlinemoney]

that white and black wire with what do you have to connect them to make current on your amplifier should the antenna not be on the other side?

[@adaniel69]

This is just a test! Check out my video where is connected to my miner! I've connected the antenna on that side to receive signal from phone in order to trigger to TX state! There's no white and black cable. The Red(+5v) and Black(gnd) are connected to a USB cable to power the amplifier

[@robertVandelanotteonlinemoney]

@@adaniel69 oké and that white and black wire with what do you have to connect them to make current on your amplifier

[@adaniel69]

@@robertVandelanotteonlinemoney i can't see any white cable! Please translate with google translate the above message if you don't understand english well! Thanks

[@robertVandelanotteonlinemoney]

@@adaniel69 the red and the black sorry

[@adaniel69]

@@robertVandelanotteonlinemoney red is +5volt and black is ground or -5volt. I've connected to a usb cable. Red is always + and black is -

[@Righttorepair880]

Hey Daniel, why is the Green light not on ?

[@adaniel69]

Hi. Because this module came with green led burned. Normaly should be on! You're right! 👍

[@michaeld954]

Does it boost cell signal case this would be awesome for my car

[@adaniel69]

Didn't tried it. Theoretically, it should! But i didn't tested it. However, you should install an antenna outside of the car and connect somehow the amplifier with the phone, or LTE modem, in case you want this for internet.

[@jackchen6410]

Cheap but useless. Really useful are the outdoor amplifiers. It must be connected under the antenna. There must be no cables in between.

[@adaniel69]

You can say what you want, but it is helping me!

[@jackchen6410]

@@adaniel69 your test. Is there an increase in network transfer speed? I don't think it's possible. This test just shows that the amplifier is picking up the signal from your phone. The amplifier's RX light is on. That's all. isn't it? Also since there is no input filter. So he can amplify any frequency signal. Include your cell phone frequency. But that would be bad. The frequency RX you need will be blocked.

[@adaniel69]

@@jackchen6410 this test is to show that the amplifier is comuting to any signal, any frequency tgat is detecting on input! It doesn't have anything to do with speed increasing or any improvement... Is just detecting RF and is comuting! That's all(in this video)!

[@kevkevlar4710]

what app is this

[@adaniel69]

Speedtest.net

[@adaniel69]

Speedtest by Ookla(Android)