“Pain in the hiney”. Excellent! Nice human phrase (we can all understand). Subscribed.
@Airbuks2 жыл бұрын
🤣👍🏻
@Mike-yb4iz2 жыл бұрын
Great video. My CF sleeve was slightly oversized at one spot and required that I painstakingly sand it to size. Only took about 15 min and the install was complete. Appreciate the clear and concise instructions, it made things easier.
@Airbuks2 жыл бұрын
Thx , glad you got that fixed 👍🏻
@jeffojibway92843 жыл бұрын
I didn’t glue mine in case I switch to a slug liner. Great video.
@lenweber71423 жыл бұрын
I still used one o ring on each end with our impacts just to dampen . vibrations,,,. Great video thanks Len and Teresa😊
@Airbuks3 жыл бұрын
Maybe I should try that aswel , thx for the tip 👍🏻 ps : nice to meet one of the female viewers aswel 👍🏻
@KingLoobrok3 жыл бұрын
@@Airbuks yes i'd like to disassemble the barrel system and see the tollerance between the CF sleeve assembled on the liner and nut and the bridge at the both extremity and see if the both o'rings at the end of each side of the CF Sleeve compensate it well or not.
@lenweber71423 жыл бұрын
@@Airbuks have you been able to put the carbon tube inside the stainless steel shroud, around the barrel?
@Airbuks3 жыл бұрын
@@lenweber7142 no , the ones I have are the very first ones the guy made and the ID is to small to fit the CF liners , I haven’t tried it in the recent SS sleeve 🤔
@chipsammich20783 жыл бұрын
Be nice if FX would actually fill there many months long backlogs on people waiting for barrels
@OregonAirgunner Жыл бұрын
For simplicity sake when I installed my carbon fiber sleeve I didn't even have to take the Barrel housing Out I just Unscrewed the shroud and pulled the liner out and then put the liner in the Carbon fiber sleeve and then put everything back together. It makes for a much quicker installation
@hotchihuahua15463 жыл бұрын
There is a thick silicone grease much like dielectric grease , it would not damage the barrel or the carbon fiber , it might be another way to dampen the harmonics without gluing . It’s something I will look into when I receive the carbon liner from Airguns of Utah .
@Airbuks3 жыл бұрын
Nice idea , die you have a name of that product?
@hotchihuahua15463 жыл бұрын
@@Airbuks Super Lube silicone brake grease or Permatex dielectric grease .
@Airbuks3 жыл бұрын
@@hotchihuahua1546 thx
@SB-wh6gy3 жыл бұрын
What would be nice is to show the accuracy before the carbon fibre sleeve install, and again after the install. We could then see if it makes any difference.
@Airbuks3 жыл бұрын
👍🏻 I had that suggestion already and thinking about it 👌🏻
@MasonStormSunny2 жыл бұрын
@@Airbuks No change at all.
@panayotisantypas38282 жыл бұрын
Many thanks for the videos.Very helpful my friend.After installation though you will need to re adjust your scope! At least mine had to be zeroed again.
@Airbuks2 жыл бұрын
That is quite normal as it makes your barrel more rigid , so after installing this your barrel will flex / droop less and there for you poi will change .
@robertpiontkowski21643 жыл бұрын
Excellent video as always!!! I give you a thumbs up on every video!! I appreciate your time and quality of every video!! I look forward to every video of yours!!! Thanks again my friend!!
@Airbuks3 жыл бұрын
Thx for the support 🙏🏻
@robertpiontkowski21643 жыл бұрын
@@Airbuks Amen 🙏🏻 God Bless !!!
@nss-diver Жыл бұрын
This chanel is so underrated
@mikegreene92159 ай бұрын
Great video, thank you for posting!
@ohleocleafar3 жыл бұрын
Would be interesting to compare groups with and without this liner, might not make any difference at all....But I guess we will only know that once we spend the money and test for ourselves....
@Airbuks3 жыл бұрын
Maybe I can do that 🤔
@ohleocleafar3 жыл бұрын
@@Airbuks that would be great and highly appreciated...your videos are awesome ;)
@hotchihuahua15463 жыл бұрын
You may find the new adjustable damper will fix much of the issues , the sleeve helps stiffen the barrel when you start reaching the limits of the barrel harmonics on higher velocities and heavy slugs . I think we are all looking forward to testing the benefits .
@geetee71543 жыл бұрын
Many thanks for making this review, is very timely for me,i have just ordered a liner for my new Crown, if all goes well, i'll be ordering for my Wildcat & DreamTac, good work my friend
@charlespeffley3 жыл бұрын
You postulate that putting one of these carbon fiber sleeves over my barrel liner will stiffen it up and dampen down the barrel whip and thereby improve the "barrels' harmonics", and that this will "help out a lot" with "harmony and accuracy". So I would like to know if you have shot any groups at say 50 & 75 yards with and without this carbon fiber sleeve on your liner to see if it truly improves your accuracy, and if so then by exactly how much did it improve your accuracy?
@Airbuks3 жыл бұрын
Hi Charles, I see your point 👍🏻 that’s a test that I can do in a future video .
@charlespeffley3 жыл бұрын
@@Airbuks I think a whole lot of us would be interested in your results
@midmichiganairguns55533 жыл бұрын
I'd certainly love to see an accuracy comparison video! Airbuks! As an FX "Guru", I challenge you to produce a comparison video. 🎬😊
@kevink552 Жыл бұрын
Where's the beef? Yeah, I'd like to see a before and after test.
@marcegrecco533 жыл бұрын
I just ordered the carbon fiber sleeve and the slug kit
@airshootist3 жыл бұрын
Great video. For the next one maybe do an accuracy comparison? I want to order one for my Maverick... but is it going to benefit my already laser-accurate rifle?
@Airbuks3 жыл бұрын
Good question, I am thinking about making a video about it 👍🏻
@SM-hj1fl2 жыл бұрын
At extreme distance I think you'd see an improvement but at 100 yards, probably not much. I put one in my Maverick, no noticeable difference under 100 yards, haven't shot with it over 100 yet.
@carloskaol23012 жыл бұрын
very well explained the cover of the barrels the one you placed not the other one that gives a larger appearance to the barrel I don't remember the name is there carbon fiber?
@Airbuks2 жыл бұрын
Sorry mate , I don’t understand 😬 you mean the shroud?
@carloskaol23012 жыл бұрын
@@Airbuks I am referring to the jacket of the barrel, the aluminum one that could otherwise be changed for a carbon fiber one
@raulsotolongo88392 жыл бұрын
Thank you for your time and explanation👍👍👍👍👍👍
@Airbuks2 жыл бұрын
You’re welcome ☺️ thx for the support
@robbypro337010 ай бұрын
Do you still have to index the liner? Or does this fix the indexing? I bet you will to fine tune
@jasonnewton38423 жыл бұрын
Great video, would it not be best to install with mild grease to stop any vibration.
@hotchihuahua15463 жыл бұрын
Silicone grease is what I’m going to try , it shouldn’t hurt the carbon fiber or barrel . Permatex silicone grease should work .
@henrymoreland87193 жыл бұрын
Thanks for showing, I wondered how this worked. However, I now wonder why FX do not make the barrel sleeve smaller so it fits snug to their liners, save on material, weight, create more air space inside the shroud. I am probably missing something. Again thanks.
@Airbuks3 жыл бұрын
The strength characteristics of carbon fiber is much higher the aluminum so putting it in between makes sense. Having the benefits of aluminum and carbon fiber together
@crypto_creep82223 жыл бұрын
So u have to spend more money 💰
@Airbuks3 жыл бұрын
@@crypto_creep8222 😂 it’s like options on a car do you really need them , no . Do you want them , yes . So it will cost some extra 😉😂
@crypto_creep82223 жыл бұрын
@@Airbuks I still belive and I'm sure you agree with me weather you can say it or not they should be a stock option
@Airbuks3 жыл бұрын
@@crypto_creep8222 offcours I agree this should be a stock option! Maybe some future models will have it standard
@KingLoobrok3 жыл бұрын
hi Man thank for your videos you are very precise in the explenation...;) i did the same without glue, but it seems that the CF sleeve move up and down in the barrel housing so i tried using 2 orings to block the sleeve but i'm afraid that this add some even minimal movement of the CF sleeve at the time of the shoot and create a new variable in the harmonic. My impressions are that the correct procedure (teoretically at least) would be using the glue ... why you choose to mention the 2 part epoxy and not the Loctite?
@Airbuks3 жыл бұрын
🤔 mine doesn’t move inside, but putting a oring to prevent that could help indeed . I use the epoxy as I am used to the compound , it’s slightly thicker then loctide to fill up the voids if there should be any
@KingLoobrok3 жыл бұрын
@@Airbuks i own the 70 mm heavy liner for slug, ordered the 70 mm CF Sleeve and tried to install without any glue or oring. I feel a movement from the back to the front and opposit i mean. if i put just an oring (the ones of the standard system that is very thick) on the front and try again i feel no movement.
@icost96043 жыл бұрын
Do you know how OD and the ID of Carbon Fiber Sleeve ?
@deanmorriss23693 жыл бұрын
Very well presented .Could I put that on my smooth twist barrel? Cher’s Dean
@Airbuks3 жыл бұрын
Any FX barrel with liners should work
@etiredevill78342 жыл бұрын
Hello "Airbuks" - you have done 2 upgrades with respect to barrel stiffness. One here with the carbon fibre sleeve, and another with the thicker outer stainless steel barrel housing. I would be very interested in knowing your opinion, which method do you think, obtains better improvement to accuracy? Thank you for your videos, they are most informative.
@Airbuks2 жыл бұрын
Hi , to be honest I never really compared it 🤔 but both do get the stiffness better . In my opinion the ss barrel sleeve is a bite stiffer then the carbon fiber liner sleeve butt also adds more weight . The original barrel with the carbon fiber liner sleeve fit nicely together and create a nice sandwich if you can call it like that , also less weight added . No fiddling with orings and is available off the shelf . If you do your tuning right I think there is no difference between them regarding accuracy out to 100m . And maybe the carbon sleeve are a much cheaper option and available off the shelf
@honda160012 жыл бұрын
This is the comment and answer I've been searching for. I was hoping airbuks would post a video, doing a accuracy comparison, between fx standard, ss sleeve and the cf sleeve. Still would be good to see a comparison as there's no other video before and after.
@jerryking3208 Жыл бұрын
Thank you for the instruction.
@Airbuks Жыл бұрын
Your welcome
@epablito2 жыл бұрын
Hello, first of all I apologize for my English, I follow you from Argentina. I ask you if it is necessary to also install the "Integrated Harmonic Barrel Tuning Shroud", together with the "CARBON FIBER LINER SLEEVE", or with this only it is enough to reduce the harmonics of the liner?
@Airbuks2 жыл бұрын
No you can perfectly use the liner sleeve without the tuner 👍🏻 it will help mostly stiffing up the barrel and maybe a little bit in the harmonics
@Fernando_Woolybooger2 жыл бұрын
Getting the sleeve past the threads is tough. Seemed as though the sleeve was slightly larger on each end. Had to push it in past the threads with the barrel nut.
@Airbuks2 жыл бұрын
🤔 strange, but ja tight fit is always better I guess 😉
@SnipeLoisirsTestsCustoms2 жыл бұрын
Hi; did you make the comparison video without and with? I would be interested to see the difference because I hesitate between this system or put the barrel tuner that will you advise me? Thank you for sharing and these explanations
@Airbuks2 жыл бұрын
Hi , I haven’t made that video . I tried bringing it on video but from the moment I putted the liner sleeve inside I had to retune my impact to get the same accuracy. So it very hard to compare the differences with or without. If you have a gun that is tuned to perfection this isn’t giving better accuracy but it improves the stiffness and helps to maintain the poi over time . In my opinion a good cheap upgrade so you don’t need to mess around with these orings 😉 I added it to all my barrels The barrel tuner I am still trying to figure out
@SnipeLoisirsTestsCustoms2 жыл бұрын
@@Airbuks Yes, it's true that it's cheap and you glued it to epoxy? Do you advise me to take the barrel tuner because it works well? Thank you anyway for your answers
@Airbuks2 жыл бұрын
@@SnipeLoisirsTestsCustoms no I don’t glue it so I can use it on different liners 😉 ( I am a cheap ass 🤣) On the barrel tuner I can’t advise advise yet as I am still testing it myself before I advise it to others . At the moment I have the feeling if you have your gun tuned very well it won’t bring a big difference as your gun is already in harmony. If your gun isn’t in balance yet you can easily see the improvements. But as I mentioned, I don’t have the complete answer to it yet
@SnipeLoisirsTestsCustoms2 жыл бұрын
@@Airbuks Ok thank you 😂for the barrel tuner I'll see as soon as it's available I'll try to adjust it well before thank you good shot see you soon
@thelairdmc2 жыл бұрын
I found the perfect solutions to my FX Impact Mk3. I got rid of it.
@Airbuks2 жыл бұрын
🤣 why what was wrong ?
@thelairdmc2 жыл бұрын
@@Airbuks A mate and I both bought FX M3 late last year. Both rifles regularly had flyers, mine had changes of grouping. Grouping at 50 meters was about 10cm. Both rifles. It may have been a bad batch after the pandemic lockdown but for me, I didn't pay £1850 for a shit rifle. Its been replaced with new S510TR AirArms. Grouping is 1cm at 50 meters without flyers. Happy I got rid of the M3.
@Airbuks2 жыл бұрын
@@thelairdmc sad to here that mate , it could be a easy fix as it could be a small issue 😬 but I am sure the Air Arms is a great rifle aswel 👍🏻 enjoy
@thelairdmc2 жыл бұрын
@@Airbuks My mate had his sent back to Sportsman Gun centre 3 times. They are the FX distributor in the UK. They never resolved the problem. I went straight for exchange to save me the trouble. Thank you for the replies, all the best.
@airriflevermincontroluk50272 жыл бұрын
Great video, thanks for sharing. After fitting the Carbon Sleeve and refitting into the outer barrel do you have to index the liner? Thanks
@Airbuks2 жыл бұрын
Hi , thx ! I have experimented with that after installing th cf sleeve and indexing still makes a difference yes
@jonahchua2 жыл бұрын
@@Airbuks what does it mean to index the liner? Like just rotating it? Thank you
@Airbuks2 жыл бұрын
@@jonahchua yes indeed , try rotating it to 12-3-6-9 o’clock and you will be surprised with the results on paper 😉
@jonahchua2 жыл бұрын
@@Airbuks oh nice, my accuracy is quite bad right now so I need all the help. Thank you very much 👍
@Airbuks2 жыл бұрын
@@jonahchua can you tell me your setup , caliber , etc …
@simoncoher48413 жыл бұрын
Another great video , easy to install have you tested it yet mate and is there much difference?. Thank you keep them coming ..
@Airbuks3 жыл бұрын
Hi , thx for the support. I haven’t had the chance to test it yet as the weather isn’t cooperating with my schedule 😉
@simoncoher48413 жыл бұрын
@@Airbuks Hi mate I be watching with anticipation, As with out the liner you where getting good groups ..
@Airbuks3 жыл бұрын
@@simoncoher4841 yes indeed my M3 is already very accurate and don’t expect any miracles but when I up the regulator pressure to 150bar and shoot slugs I never get the same accuracy as with pellets at a low regulator pressure , so I hope all the extras will help to get good groups on paper 🤞🏻
@simoncoher48413 жыл бұрын
@@Airbuks As soon as the weather gets good and you have some free time you will soon find out I for 1 can wait mate look forward to your review 👍
@jerryking32083 жыл бұрын
Thank you. Looks pretty fool proof.
@magwarblood3 жыл бұрын
So really there is no point in glueing them as surly once you screw the jam nut in it will press up anyway ????
@adarshpb8895 Жыл бұрын
Any idea what is ID and OD of carbon fibre sleeve?
@liukang81 Жыл бұрын
Wow ..! It’s great sir! I like it! Can you provide me a link or website so I can get it sir? Thank you very much
@Airbuks Жыл бұрын
You should be able to buy it at any store that sells FX airguns
@juandepeter08303 жыл бұрын
Can you measure the OD and the ID of CF sleeve?
@yanhuawu66142 жыл бұрын
Great job my friend what is the CF length of the 600 millimetres superior liner thanks
@Airbuks2 жыл бұрын
Not 100% sure as I installed it in my gun 😉 but I think it’s about 500mm long
@yanhuawu66142 жыл бұрын
@@Airbuks thank you
@yanhuawu66142 жыл бұрын
@@Airbuks thanks and what is the OD/Id size of the CF sleeve
@Airbuks2 жыл бұрын
@@yanhuawu6614 also not sure as I mentioned I have it installed 😉
@yanhuawu66142 жыл бұрын
@@Airbuks ok thanks
@jeromemorespeeder3503 Жыл бұрын
Hello! I purshased one but it’s impossible for me push it down the barrel?! Few centimeters and the carbon is already scratched and at 10cm I was blocked… half a hour to push it out 😮🤬🥵 do you know this problem? Thx 🙏
@Airbuks Жыл бұрын
No I haven’t heard of that yet . Is it a original FX part or did you buy it online somewhere ?
@jeromemorespeeder3503 Жыл бұрын
@@AirbuksHello, thanks for your answer. No it’s a Fx airgun packaging (700mm .22) i don’t understand what happen here 🤔☹️
@Airbuks Жыл бұрын
@@jeromemorespeeder3503 send FX a mail explaining it and they will send you a replacement
@Manson16v Жыл бұрын
Hello, Good video Can I do the same with my dreamline ? Thank you
@Airbuks Жыл бұрын
Yes offcours
@worker20043 жыл бұрын
Fx really should make these free or at least at very low cost. 30 euro for a little tube? 5 euro would be a better price if you ask me. It's not up to the customer to pay for this when it's a design fault.( Barrels too weak) The sleeves should come standard fitted as well.
@Airbuks3 жыл бұрын
Maybe they will be in the future 🤞🏻
@Nate703 жыл бұрын
Can you tell me what the diameter of the tubes are thanks
@tkielek243 жыл бұрын
Thanks for other video 😊
@Airbuks3 жыл бұрын
You’re welcome 👍🏻
@2002ZRX1200R2 жыл бұрын
What are the lengths of the sleeves. I ordered one for my 700mm barrel and the sleeve showed up 596mm, doesn't seem right?
@Airbuks2 жыл бұрын
Yes that is 100% correct. A 700mm liner sits about 45mm into the silver and brass transferport and the lock nut on the end screws in about 20-25mm and with some room to spare 600mm for a 700mm barrel is correct
@t206n2 жыл бұрын
Do you need this if you were to get the FX Integrated Harmonic Barrel Tuner?
@Airbuks2 жыл бұрын
No it’s not needed but I would advise it 👍🏻
@robinsonsitompul9362 Жыл бұрын
So should we combine it with carbon barrel harmonic tuner?
@Airbuks Жыл бұрын
As I replied in the other comment 😉
@ag4306342 жыл бұрын
Hi, just a quick question. Does this carbon fiber liner sleeve fit to a superior barrel? Thank you.
@Airbuks2 жыл бұрын
They are made to fit the superior and superior heavy liners 👍🏻
@ag4306342 жыл бұрын
Thank you!
@harryarteza343511 ай бұрын
Someone link me to an install vid on the dreamline barrel please? The orings in that are different. Not sure I could get the barrel centered. Had a few clips of the shroud.
@Airbuks11 ай бұрын
What kind of Dreamline barrel do you have a traditional one like in the impact etc or a super light one with spacers like the Crown has ?
@ShayanQuanta2 жыл бұрын
how about 500mm installation ? need clearance between ham nut ?
@Airbuks2 жыл бұрын
What do you mean sir ? They make one for a 500mm liner aswel 🤷♂️ But the cf sleeves are only for the normal barrels not for the super light ones from the crown
@felleice3 жыл бұрын
My carbon tube didnt slide in that easy into the barrel sleeve. Had to use a bit force.. liner went into the carbon tube easier.
@Airbuks3 жыл бұрын
🤔 that’s odd
@paweszwed8577 ай бұрын
Does this also apply to Fx panthera?
@Airbuks7 ай бұрын
The Panthera comes with one standard from factory
@raultamez13322 жыл бұрын
Sr I have a cuestion where can I get the jam nut part for my fx impact m3 .22 cal
@Airbuks2 жыл бұрын
You can order it from your dealer
@CALOYairguns2 жыл бұрын
what is the thcikness for .22 cal, i seen it as 8mm id, but i dont know what must be the od. the common in my area is 8mm x 10mm, making it 2 mm thick. does it need to be thicker?
@Tunnelrat66662 жыл бұрын
What size did you get for the .22?
@CALOYairguns2 жыл бұрын
@@Tunnelrat6666 8mm*12mm 3k cf tube for drone will do, just trim the inner and outer diam to fit for liner and shroud
@Tunnelrat66662 жыл бұрын
@@CALOYairguns Thanks will give it a go. Fx has never had stock in Australia and I am sick of waiting.
@andrefigueroa7315 Жыл бұрын
Why none for the 357 800mm barrel? Lord knows it needs it .
@Airbuks Жыл бұрын
🤔 not sure if they exist , I don’t own a 357 so I haven’t looked into that
@andrefigueroa7315 Жыл бұрын
@@Airbuks I did , they don’t make them yet . If you need one for the 700 and o rings are not enough then why they they work for a 800mm ? You are limited by the can you can put on the rifle because the barrel sag is ridiculous. I don’t think they thought it out . I know the 800mm plus barrels from skout come with them . As soon as they dreamed this up they should have made one . Before even the slug barrel .
@andrefigueroa7315 Жыл бұрын
Then you have to buy the whole barrel kit just to get the tension system . 400 bucks . They don’t sell the system without the new block . I might have to make my own stuff .
@klane72 жыл бұрын
Did you tought about wht cold and warm weather could do when you bound 2 different materials togheter? 😉
@klane72 жыл бұрын
Better ad some grease on the liner
@Airbuks2 жыл бұрын
That’s the reason why I don’t glue them aswel 😉 the grease is a good tip 👍🏻 The characteristics of carbon fiber in cold and warm are very good ( expansion/ contraction wise ) so I don’t see much of a problem
@uzairahmadahmad76802 жыл бұрын
is the 600mm sleeve we sets on 700mm barrel?reply please
@Airbuks2 жыл бұрын
Hi mate , if you know me a little bit I will always try to reply 😉 The sleeve for a 700mm liner is around 600mm long yes 👍🏻
@silvsiri34783 жыл бұрын
Hi my friend, could you recommend a tri pod for a Impact M3?
@Airbuks3 жыл бұрын
No sorry, still looking for one myself 😉
@arubino192 жыл бұрын
Athlon Midas hands down
@marcceyssens85242 жыл бұрын
Kan het zijn dat ik van mijn Maverick Sniper de loopmantel (shroud) niet losgedraaid krijg? Ik durf niet veel meer kracht te zetten uit angst iets kapot te draaien of te forceren...
@Airbuks2 жыл бұрын
Normaal gezien moet je die er gewoon kunnen afdraaien. Er kan geen lijm of iets dergelijks gebruikt zijn omdat je toegang moet hebben tot de schroef van voor op je loop zodat je de liners kan wisselen of poetsen .🤔 Voor de veiligheid kan je de loop er best afhalen en in een bankvijsje steken en dan nog eens proberen . Op die manieren kan je normaal gezien niets kapot draaien
@marcceyssens85242 жыл бұрын
@@Airbuks Ik heb de Maverick tweedehands, dan weet je nooit wat er vooraf mee gebeurd is natuurlijk, maar ik ga van het goede van de mensen uit en geloof de vorige eigenaar dat ie hem niet gelijmd heeft. De Maverick ziet er trouwens absoluut niet verkloot uit. Wat is trouwens ook het nut om te lijjmen. Ik ga dus idd de loop voorzichtig klemmen en proberen los te krijgen, desnoods met gebruik van een hetelucht-warmtebron. Het is noodzakelijk want ik wil er de DonnyFl Shogun op bevestigen. Heb ik trouwens al gedaan en de resultaten zijn zeer bemoedigend, maar dat ding is redelijk topzwaar en ik wil de loop zoveel mogelijk verstarren om de instabiliteit eruit te halen. Ik houd je op de hoogte. Appreciatie voor je snelle info vanuit Bree, Limburg.
@Airbuks2 жыл бұрын
@@marcceyssens8524 ik ga ervan uit dat die gewoon stevig aangedraaid is dus ik een bankvijs zal het wel lukken. . Succes en laat maar weten als het je gelukt is
@marcceyssens85242 жыл бұрын
@@Airbuks Dag Matthias, want ik geloof dat dat je voornaam is, excuses als ik er hiermee langs zit, maar gelieve dan te verbeteren:-). Ik heb de shroud juist los gekregen. De volledige loopset uit het wapen verwijderd. Daarna de loopmantel tussen de bankschroef gedraaid, goed vast, maar serieus goed vast. Daarna met moeders haar haarföhn goed lang het uiteinde vd shroud verwarmd zodat je die met de blote hand niet meer vast kon houden. Dan schietgebedje gelanceerd tesamen met toch nogal wat kracht (en dito krachttermen) en plots kwam ie los. Dat is dus iets wat je kan meegeven aan al je volgers (met hetzelfde probleem)! De loopmantel zit niet altijd handvast in de shroud vastgedraaid. Ik ga je niet verder ophouden want moet nog een en ander bestellen om de Maverick op het niveau te krijgen waarop ik 'm wil. Bedankt en fijne dag nog! Keep up the good work man!
@Airbuks2 жыл бұрын
@@marcceyssens8524 goed te horen dat het gelukt is , deze hoort niet zo vast te zitten 🙈 misschien heeft de vorige eigenaar hem wat te vast gezet 🤔 . Eind goed al goed 👍🏻 Ps Mathias is idd mijn naam 👍🏻
@rolis.j2 жыл бұрын
do they make them for dreamline compact?
@Airbuks2 жыл бұрын
🤔 I think the shortest are for a 500mm , but you could buy a 500mm and cut it down to length
@user045-key772 жыл бұрын
what is the OD and ID of 177 carbon fiber sleeve.
@Airbuks2 жыл бұрын
I don’t know 🤷♂️ I don’t have any in 177
@tom-mt6im2 жыл бұрын
please, What is the inner diameter of small carbon fiber
@Airbuks2 жыл бұрын
Measure the liner you have in your gun it depends on the caliber 😉
@tom-mt6im2 жыл бұрын
@@Airbuks .25 caliber. What's the outside diameter
@oferreira53342 жыл бұрын
Você vende LINE para o Brazi?
@pinoydad_08113 жыл бұрын
Is this sleeve applicable on the dreamline as ell?
@Airbuks3 жыл бұрын
Yep
@pinoydad_08113 жыл бұрын
I have the new dreamline version..where can I get this CF tubes
@Airbuks3 жыл бұрын
@@pinoydad_0811 depends on where you live , if you live in Europe try Krale Schietsport or Huma Air
@Wolf-689xl3 жыл бұрын
Are they available in the USA?
@Airbuks3 жыл бұрын
They should yes
@Wolf-689xl3 жыл бұрын
@@Airbuks thank you, also thank you for the link to Ronny, his stainless steel sleeve arrived yesterday, amazing craftsmanship.
@Airbuks3 жыл бұрын
@@Wolf-689xl just be aware the Cf liner sleeves might not fit the stainless steel sleeves as they have a smaller ID I think . It was like this in the beginning he made them , not sure if it’s the same now 🤷♂️
@hotchihuahua15463 жыл бұрын
Just got mine from Airguns of Utah yesterday .
@SiliconeSword2 жыл бұрын
What is the outer diameter of a .22 liner?
@Airbuks2 жыл бұрын
Not sure 🤔
@Gunshow863 жыл бұрын
do they work though?
@Airbuks3 жыл бұрын
Time will tell 😉
@Gunshow863 жыл бұрын
@@Airbuks I hope so. I just ordered one at the same time I ordered my new M3
@jasonnewton38423 жыл бұрын
Even if it helps to stop overtightening of the jam nut its a bonus.
@SHOOTER32583 жыл бұрын
M3... what abaut mk2?
@Airbuks3 жыл бұрын
The cabin liners sleeves fit any Fx barrel with liners 👌🏻
@luongle63602 жыл бұрын
Làm sao tôi có thể mua nòng FX được
@AntonioLopez-jg1gd3 жыл бұрын
Por favor Los subtítulos tener opción de verlo en Gracias
@Airbuks3 жыл бұрын
I will try on some further videos 👍🏻
@AntonioLopez-jg1gd3 жыл бұрын
@@Airbuks en español gracias
@josefernando92513 жыл бұрын
Like friends 👍👍
@crypto_creep82223 жыл бұрын
Fx should make this stock and not a aftermarket part. Fx is getting away from making great guns to making gimmick guns
@hotchihuahua15463 жыл бұрын
When the slugs came out and customers pushed the limits of speed the harmonics increased , they are addressing it with a less expensive but effective fix for older MK1 , MK2 guns , It’s not a bad idea .
@joaobatistarodriguesmagalh8491 Жыл бұрын
Qual é a medida do sleeve?
@saman3833 Жыл бұрын
Can buy a pc?
@Airbuks Жыл бұрын
Nope 👎
@doncasar03022 жыл бұрын
You Shop pls …????? Link
@Airbuks2 жыл бұрын
I don’t have a shop 🤷♂️ just a KZbin guy 😉
@spikex412 жыл бұрын
Skipped the how to remove the barrel part…
@Airbuks2 жыл бұрын
If you know your way around your FX I totally understand you skipped that part 😉 for some owner it is still useful
@juanrochegalisteo88952 жыл бұрын
FX los rifles más estúpidos si quieres tirar una clase de balines le tiene que cambiar el cañón sintonizador al cañón silenciador y al final no agrupa
@Airbuks2 жыл бұрын
English please
@JemsMomin-es7bq10 ай бұрын
Hi
@fredcarter70032 жыл бұрын
Those carbon fiber sleeve are not on the market because fx people are lazy so you should not be doing a review on a product that not for purchase
@Airbuks2 жыл бұрын
Hi , from the moment I did the video they always have been in stock where I live 🤷♂️ check out these links if you live in Europe www.krale.shop/nl/barrel-sleeve-fx-carbon-fiber/ www.huma-air.com/FX-Carbon-Fiber-Barrel-Sleeve