It gives me Is anxiety the way he tosses the barrel liners around the table 🤣 Thank you Ernest for all you due and have done for the sport 👍
@iimran032 жыл бұрын
Hi Ernest, I want to create a 700mm barrel for my fx crown with CF on it, can you please guide what parts I need to get, like transfer port, jam nut etc.. And is it do able?
@rudymsmith Жыл бұрын
I wonder why they don't sell these pre-made (as an option to buy)
@bigfranksworld2 жыл бұрын
I see some videos where the newest FX sleeves don't get bonded. Would you bond them anyway? Thanks for the info!
@chrisfigueroa33614 жыл бұрын
I just ordered two of the 700mm oh yea I Installed the new dual tranf port dam with the slug kit geez ernest feel like I'm shooting a 22 cal rimfire in my backyard shooting 34 gr varmint knocks at 1025 fps easy lol.... crazy I'm going to back it down that's to much power but it's good to know I got it if I need it one of thses days thanks ernest
@e.l.robbins56143 жыл бұрын
Thank You Ernest. Keep innovating
@AirHeadArms Жыл бұрын
Always helpful Ernest!!
@2L8CO4 жыл бұрын
Ernest, thank you for another great video. Can you tell us why you chose to "glue" the full sleeve to the liner and not just the ends, or some other combo? Would the different glue densities in the length of the sleeve also somewhat give different harmonics? Will these harmonics be easier or harder to tune? Don't get me wrong, stiff is very good for so many reasons, but, can you tell us real data/tuning that says it's better than the O-rings that we currently have? (I'm going to try this anyway, HaHa!)
@scottmichael37453 жыл бұрын
GREAT questions my man! I'd like to know too!
@moussaba2924 Жыл бұрын
Ernest ?
@KevinWood443 жыл бұрын
Are these available? I can not find them anywhere. I found others on ebay but those seem to need epoxy or something and do not fit and perfectly.
@bonesawmcgar40622 жыл бұрын
I got a new Impact m3 in January 2021, and oddly my liner didn't have the superior liner sticker on it. Is that the new thing these days to skip putting on the superior sticker? Or is something a miss on my gun?
@WaschyNumber13 жыл бұрын
Would be locktide(blue) thread stuff enough instead off glue?
@chrisungureanu61843 жыл бұрын
Did you shoot it to see how good or bad the harmonics are effected ?
@ernestrowe50613 жыл бұрын
Ask: 910airguntuningandrepairsllc.com
@pepesempire4 ай бұрын
Super glue worked a treat on mine
@soabatespcp4 жыл бұрын
ERNEST . which of the liners is the best. superior heavy or superior liner?
@ernestrowe50614 жыл бұрын
Normal superior
@GeKo19664 жыл бұрын
Hi Master Ernest!🙌🙏 About to order a couple of your CF sleeves! Just a question regarding the Liners! do i have to take of the transfer port, as these are Loctited to the Liner!! Can i not just remove the jam nut, clean it with sandpaper and brake cleaner, wipe it totally dry, mark with pen, then apply the Loctite and insert the CF sleeve and let it bund/cure??? Thanks!!! Stay safe! G
@ernestrowe50614 жыл бұрын
GeKo --- no need to remove transfer port or barrel adapter or unscrew the barrel tube. Remove jam nut remove liner clean and bone the CF sleeve to proper area let cure over nite then reinstall liner
@GeKo19664 жыл бұрын
@@ernestrowe5061 Thank you Ernest!! much appreciated!!! 👍
@tonynooyen24232 ай бұрын
How do you know which end is muzzle n which is breech
@rob64453 жыл бұрын
good morning Ernest, very good your video, I would like to know the specifications of the carbon fiber tube that is placed between the liner and the pipe, thank you in advance.
@subsonicreviews18354 жыл бұрын
So, no more orings and no more flex? What are the CF tube's dimensions for a .25cal
@ernestrowe50614 жыл бұрын
Yes no more oring to use, more stiffer. Measure the barrel ID and liner OD you will get your dimensions. These CF liner sleeve are made with custom size molding- so your not going to see the actual size I’m using anywhere.
@Sephroth_I_am3 жыл бұрын
Ernest is it necessary to add adhesive on the 700mm barrel?
@uzairahmadahmad76802 жыл бұрын
is the 600mm sleeve we sets on 700mm barrel?reply please
@chrisfigueroa33614 жыл бұрын
What's the twist rate on the 25 cal 700mm barrel all of them from pellet to slug liners do you know ty great stuff ernest thanks for sharing
@ernestrowe50614 жыл бұрын
Chris Figueroa - Hi, that info is posted on FX Airguns Facebook and Instagram
@chrisfigueroa33614 жыл бұрын
@@ernestrowe5061 10-4 it cuz one of the liners I got in 25 cal 700mm measures 17 inches one full turn it has me scratching my head from breach to front of barrel exactly 17 inches top to top of barrel then when it start to turn it's like 20 inches
@HumbertoClaudino4 жыл бұрын
Congratulations on the channel. I wonder if you used any kind of "Bond Line Controller". Thank you
@SDH-yu8gy3 жыл бұрын
can the 500 liner and shroud be adjusted for the 380 compact barrel
@marcioeidelwein76104 жыл бұрын
congratulations, I'm from Brazil, what is the name of the adhesive used in bonding the tube
@goodboyringo97163 жыл бұрын
He said in another video that any two part epoxy will work but he is using black 480 Loctite . Don't use regular glue.
@tomasdelosreyes43594 жыл бұрын
Hi Ernest,can I have this on my Wildcat MK2 700mm 30cal smooth twist X liner?thanks
@ernestrowe50614 жыл бұрын
Tomas Delos Reyes -> FX STX liners are all the same don’t matter what model. So .30 will only fit inside.30 CF liner sleeve
@tomasdelosreyes43594 жыл бұрын
Thanks,is this available now?
@fredcarter70033 жыл бұрын
This barrel is only for the impact ?
@stevereese64883 жыл бұрын
Can the sleeves be installed on the new Mavericks to increase precision accuracy?
@ernestrowe50613 жыл бұрын
Maverick use the same size STX barrel & shroud system as the impact
@gasconader11504 жыл бұрын
So this is just for older crowns/impacts, etc?? Not for continuum?? Don't all fx guns with jamnut use new superlite barrels with just liner and shroud and no "barrel"?????
@fredcarter7003 Жыл бұрын
The barrel style you are using is not the same style I have,mine has no jam nut
@magwarblood3 жыл бұрын
Would araldite be ok to use for this ?
@teddyjam18803 жыл бұрын
What if I got a 35cal will the I need a sleeve for the slug liner?
@derrickmitchell39dm2 жыл бұрын
Hell yeah you will bro!
@derrickmitchell39dm2 жыл бұрын
measure the inside Diameter and outside Diameter of your barrel brother. Look on Amazon for the tighest fit. You may have to bu, two CF tube and cut it the proper length. And yes I'd glue it on as you see in this video. LET IT DRY COMPLETELY BEFORE PUTTONG IT BACK ON YOUR GUN.
@RockinM644 жыл бұрын
Thank you I just got this and looked but the 25 cal 700mm is done sold out. When will more be available any idea. I love your videos I have learned so much and still have alot to go. Keep up the great work Ernest.
@scottmichael37453 жыл бұрын
What kind of lock tight 🤔 please! There are Several formulas and hardnesses.
@sarhanalhabsi3 жыл бұрын
So which Loctite is better 480 or 638 ?
@brockhickman19882 жыл бұрын
Man I need one bad! They say out of stock, any idea when you might have more?
@ernestrowe50612 жыл бұрын
Call FX Dealers, what caliber??
@fredcarter70033 жыл бұрын
Where can I get the carbon fiber tube and what’s the price
@magwarblood3 жыл бұрын
Is that loctite 480 ?
@robingibson75033 жыл бұрын
Will the Permatex brand blue thread locker work as well?
@ernestrowe50613 жыл бұрын
Its best to use two part epoxy that chemical drys, the cf is long and blue may not dry in the middle. Cf didn’t have to be bounded- just slide in to replace orings
@we7shewe7she673 жыл бұрын
Where can i buy the cf sleeve ?
@jerryking32083 жыл бұрын
Why don’t they make the 700 carbon liner full length like the 600? I would think the 700 would need the most stabilization.
@k15elv2 жыл бұрын
They do 👍 in this vid it doesn’t look like the right carbon liner is on the 700 barrel liner I have one and it’s longer
@mikedonnell76424 жыл бұрын
Can I use JB Weld instead of 480 Loctite? (the 24 hr JB Weld)
@ernestrowe50614 жыл бұрын
Mike Donnell - yes any 2 part epoxy let cure before applying torque
@MasonStormSunny4 жыл бұрын
@@ernestrowe5061 Loctite 638 is better.
@ernestrowe50614 жыл бұрын
MasonStormSunny -> don’t know never tired- satisfied with 480 results
@MasonStormSunny4 жыл бұрын
@@ernestrowe5061 how fast does it settle?
@ernestrowe50614 жыл бұрын
MasonStormSunny --> barrel??? If so barrel doesn’t vibrate up and down just aft
@MrRavaneda4 жыл бұрын
So silicone is not good???? Like you did in your video before????
@ernestrowe50614 жыл бұрын
JOSE RAVANEDA -> no silicon, won’t cure in the middle
@MrRavaneda4 жыл бұрын
So I need to do my both lines again great thanks
@ernestrowe50614 жыл бұрын
JOSE RAVANEDA if liners CF doesn’t move and stiff its OK
@MAAAH15813 жыл бұрын
hi earnest i just checked the 910 store and the sleeves are sold out 🤕 when it will be in stock 👋🏻
@ernestrowe50613 жыл бұрын
I got .25 & .30 cal sleeves in stock, will post on the 5th,
@MAAAH15813 жыл бұрын
@@ernestrowe5061 i wanted.22 sleeve will that be available soon?
@ernestrowe50613 жыл бұрын
@@MAAAH1581 sorry don’t stock that caliber-- not much interest in that caliber
@MAAAH15813 жыл бұрын
@@ernestrowe5061 that’s sad 😞 so do you know any other sellers who sell it
@ernestrowe50613 жыл бұрын
@@MAAAH1581- 910airguntuningandrepairsllc.com has them in stock now
@georgeg81064 жыл бұрын
Hi Ernest is there any chance of you getting a power plenum in production for a agt Vulcan2 like the fx wildcat it would be a good little earner for you and make a lot of shooters very happy am living in hope take care
@ernestrowe50614 жыл бұрын
george g -> sure send me your Vulcan!
@georgeg81064 жыл бұрын
Ernest Rowe Ernest that would be amazing to have you to do work on my gun but unfortunately I live in the Uk I would have driven straight over with out a doubt there’s no one over here makes one and in the USA they adapt the cricket one to fit my gun max speed is 845fps with 33.95 I would love to have them flying at 900 am 62years old and spend all my spare time shooting is there any way you could send the parts out and I could do the fit myself will Roman put a link on utube for me 5 months ago he’s had over 9k hits on it these plenum would fly out { am finding it hard to believe the grand master of the air rifle world answered my call YOU LEGEND } take care
@georgeg81064 жыл бұрын
Will Roman link was how to adjust the trigger I missed that bit out oops thanks again will
@RockinM644 жыл бұрын
Where and when will the one for the 700 be available.
@ernestrowe50614 жыл бұрын
Michael Massar at: 910airguntuningandrepairsllc.com
@joaobatistarodriguesmagalh8491 Жыл бұрын
Quais as medidas do sleeve?
@derrickmitchell39dm3 жыл бұрын
I gotta know why there's not à FX Carbon Fiber Liner Sleeve -800mm. Why!
@stevereese64883 жыл бұрын
What accuracy gains did you see ?
@ernestrowe50613 жыл бұрын
Check out AGN forum: www.airgunnation.com/topic/does-ernest-rows-stx-liner-carbon-sleeve-work/
@derktellegen4 жыл бұрын
What's the number of the loctite you are using.
@ernestrowe50614 жыл бұрын
480
@derktellegen4 жыл бұрын
@@ernestrowe5061 Thanks Ernest.
@MasonStormSunny4 жыл бұрын
@@derktellegen 638 is better. Trust me.
@sergeantmao80174 жыл бұрын
Ernest can’t find it on your website.....
@ernestrowe50614 жыл бұрын
Sergeant Mao posting later tonight
@sergeantmao80174 жыл бұрын
Ernest Rowe alright looking forward too it
@franciscocarvalho24244 жыл бұрын
Só falta eu consegui à minha impact onde um grande sonho like tamos juntos pelo é sucesso
@johanpersson12044 жыл бұрын
Nice! where can i order it?
@ernestrowe50614 жыл бұрын
Available at 910airguntuningandrepairsllc.com
@johanpersson12044 жыл бұрын
Can´t find it on the site
@ernestrowe50614 жыл бұрын
Johan Persson l--> later tonight
@ptescreen184 жыл бұрын
Johan Persson u wil be waiting for ages he always said soon but the product never arrives lol
@MasonStormSunny4 жыл бұрын
@@ptescreen18 exactly. He is crazy.
@wellyliu70873 жыл бұрын
I would like one on my 35 cal impact.
@ernestrowe50613 жыл бұрын
Not possible-> only blue Teflon tape can fit between barrel and liner 😜
@juanrochegalisteo88952 жыл бұрын
Canyon para cada ocasión cañones a 300 € si quieres ir a Órgiva un cañón si quiere tirar balines otro cañón tonterías de rifle FX los antiguos Fx ivan mejor