Showing you the new TRS rail by Saber Tactical up and close , going over the features aswel as how to install it. Music credits : Epidemic sounds Cut the Mustard - Tigerblood Jewel
Пікірлер: 113
@patrickzwei2 жыл бұрын
Man wat heb jij leuk speelgoed. bedankt voor de informatieve video....keep them comin
@Airbuks2 жыл бұрын
Ik weet het 🤩 prijs mezelf gelukkig 😁
@12VALVETORQUE2 жыл бұрын
looks incredible! thank you for sharing...
@Airbuks2 жыл бұрын
Thx 🙏
@justinhromek732 жыл бұрын
Bad ass looking setup my friend!
@Airbuks2 жыл бұрын
Thx 🙏
@hotchihuahua15462 жыл бұрын
I am still debating which way to go . The lower extended rail or this new extended shroud. My reasoning is the weak point on the the three top rail screws from FX. Especially the two smaller long Allen screws . You are asking those screws to hold the scope and the load on a bipod . The lower rail has beefier screws to do the job and it only has to support the bipod . The other question would be if you have seen any improvement in accuracy between the two ? Bling is one thing , reliable function and accuracy is another . Then there is the price of $150.00 vs. $250.00 . I’m leaning more to the lower rail unless you have seen any improvements down range with one over the other .
@Airbuks2 жыл бұрын
I see what you mean 👍 I am not worried about the screws that hold the rail in place , almost the 3 of them the can hold a lot specially in the direction the forces will be applied in my opinion. I haven’t had the chance to see if I get different results between a bottom mounted bipod or a over the barrel one simple because I don’t have a over the barrel one …. Just yet 😉
@chrisfigueroa33612 жыл бұрын
Kool looks like a star wars gun thanks for sharing bsafe buddy 👍
@Airbuks2 жыл бұрын
😁 yes it does make it look more Star Wars like 😉
@chrisfigueroa33612 жыл бұрын
@@Airbuks but it looks badass 😎 my friend with the 600mm barrel
@johnnybbgunner21363 ай бұрын
No thread lock is necessary? Great video.🤠🇺🇸
@180del2 жыл бұрын
Just ordered one 👍
@xaramarcus57962 жыл бұрын
nice product and video
@Airbuks2 жыл бұрын
Thx 🙏
@hotchihuahua15462 жыл бұрын
Airbuks, When do you think Saber Tactical will come up with a dolly wheel attachment so I can haul my highly modified 50 pound Impact around . 😁 Kidding aside , nice video and sharp looking rail .
@Airbuks2 жыл бұрын
🤣🤣 you are 100% right , a dolly could come in handy to go to the range. But once at the bench it’s all beneficial 😉 they do make some great accessories 👍
@IzaelLealairguns2 жыл бұрын
Very good ! 👏🏻👏🏻👏🏻👏🏻👍🏻🤝🏻
@Airbuks2 жыл бұрын
Thx
@asshofakhumairoh27132 жыл бұрын
Mantap jiwa bosku smoga bisa punya yunit impian aminnn... 😭😭😭
@nicoso71 Жыл бұрын
What scope mount with quick release do you have? Thx.
@Airbuks Жыл бұрын
That wil be a Spuhr mount 👍
@JuanDoe1776 Жыл бұрын
Great step by step video. I just ordered mine. What brand is the bipod that mounts on the top rail?
@Airbuks Жыл бұрын
Thx , i guess the bipod you are referring to is the GRS bipod
@markusscholl49582 жыл бұрын
Interesting part. But I believe this directly impacts barrel harmonics. Free floating barrel is gone then. I think the barrel tuner is after installing the rail and 12 o'clock bipod obsolete. What do you think?
@Airbuks2 жыл бұрын
Indeed the barrel clamp fixes the barrel and not free floating anymore, if the barrel tuner still has a affect I still have to test . But it will be interesting to see what will be more accurate with clamp and without barreltuner or without clamp and with tuner 🤔
@markusscholl49582 жыл бұрын
Thank you for the fast response .Im super excited what will be the outcome of this test. Do you think this rail housing can be used reliable without the barrel support inlet? That would keep the barrel free float or?
@who0who4 ай бұрын
Very nice...please where can i have like your carbon fibre shroud?
@Airbuks4 ай бұрын
That is a DIY project I made from a harmonic barrel tuner
@simoncoher4841 Жыл бұрын
First happy new year mate, Great video. Question so looking at trs rail the only thing I worry about my .25 m3 shooting great at the moment but obviously I've not taken my barrel off yet , Is the a special way it goes in as there is a slug and pellets port. Also what do you think of the clamps that just go round the bottle and barrel do you think that would stiffen the barrel ..? Thank you..
@Airbuks Жыл бұрын
Hi , happy new year to you aswel! The clamp doesn’t stiffen the barrel it’s there to hold it and make sure the poi doesn’t change when conditions change and the barrel is in line with the scope rail . Works great as long as you don’t use the clamp and a over the barrel bipod, if you understand what I mean . The barrel is easy to turn around and flip from pellet side to slug side . What is the question about that actually
@simoncoher4841 Жыл бұрын
@Airbuks Hi mate , yes the barrel when you slide it back in , I wasn't sure if there was a correct way to put it in? Or it dosnt matter which way it goes in I am shooting pellets and slugs at the moment. Thank you..
@Airbuks Жыл бұрын
@@simoncoher4841 if you shoot pellets and slugs you can use the dual port
@simoncoher4841 Жыл бұрын
@Airbuks Thanks mate, I've just ordered the trs rail . Keep the videos coming especially the M3 🙌👍
@nickvanderheijden55744 ай бұрын
Do you think there might be a positive effect on accuracy and rigidity when I install a second shroud support halfway on the TRS using an M-Loc slot?
@Airbuks4 ай бұрын
Personally I would keep it free floating for best accuracy
@nickvanderheijden55744 ай бұрын
@@Airbuksokay. I ordered the TRS with Krale yesterday and had them send an extra clamp. Just curious what it does with an extra clamp. I’ll let you know. 👍🏻
@CoDSniper343242 ай бұрын
@@nickvanderheijden5574How did you go? Tighter grouping at all?
@nickvanderheijden55742 ай бұрын
@@CoDSniper34324Hi, no difference. I have no barrelband at all at the moment. Just to see if that changes anything.
@CoDSniper343242 ай бұрын
@@nickvanderheijden5574 Interesting! I’ve heard the TRS with the band does help keeping a good POI incase of accidental knocks to the barrel out in the field, which would make sense.
@hotchihuahua15462 жыл бұрын
Airbuks I would like to see different configurations of bipod attachments with this rail . Eliminating the bottom rail if that’s possible .
@Airbuks2 жыл бұрын
🤔 if I could get my hands on a few different models yes , but that will be costly 😬😉
@MasonStormSunny2 жыл бұрын
Issue: kzbin.info/www/bejne/rZXOemiZZZaoiqs
@biakmawia2 жыл бұрын
What about 500with standard shroud, (not compact shroud) because i will use 22 500mm and 25cal 700mm if i install the standard TRS shall i be able to use the original 500mm shroud and the hollow silencer that came with the gun?
@Airbuks2 жыл бұрын
What do you mean mate , 500mm shroud is a compact shroud ? For the 500mm there is only one size shroud as far as I know ?
@biakmawia2 жыл бұрын
@@Airbuks the original shroud is longer than the compact version shroud
@Airbuks2 жыл бұрын
@@biakmawia ?? Do you mean the extendable one . My 500 barrel all have the same original FX shroud
@raulsotolongo88392 жыл бұрын
Hey, brother, I follow you all the timeI recommend a suppressor for my fx impact m3 caliber 30??
@Airbuks2 жыл бұрын
🤔 for me I only have experience with 2 brands and that’s Donny and Huma . If you go for most quite I would always look for the biggest expansion chamber so a Ronin / Emperor or a Huma mod 50 ( you can make it longer or shorter) . I know these are huge moderators but if you can live with a little big more noise and not the quietest a fat boy 2.0 or a shorter mod 50 is a good middle ground
@martdod2 жыл бұрын
Saber Tactical should have given the shroud extender to customers that originally bought this for their 600mm barreled Impacts. Originally their website said that this fit a 600mm barreled impact then they changed their website giving the length of rail but not saying it wouldn’t fit a 600mm barrel without some modification. I feel this was a cheesy way of shirking responsibility for bad information to their customers. I wrote to them about it and never heard back.
@Airbuks2 жыл бұрын
I have been told that they have modified the length of the second batch to suit the 600mm and eliminates the need of the adapter
@user-nw5vk4zm6b2 ай бұрын
Hi I have the 600mm harmonic shroud and tuner ild like to see what it looks like in compact and standards lengths please
@arnaud1693 Жыл бұрын
Thanks for this video. Do you think it is possible to adapt it to the FX Maverick?
@Airbuks Жыл бұрын
Hi , saber tactical has released one for the Maverick now 👍
@eoinwestman62222 жыл бұрын
Great video. Thank you. Does the compact come with the delrin clip for the barrel.
@Airbuks2 жыл бұрын
Yes it does 👍
@eoinwestman62222 жыл бұрын
@@Airbuks thank you
@Not_Evil_2 жыл бұрын
Does the compact version cover the whole 500mm barrel? Would really like to know
@Airbuks2 жыл бұрын
Didn’t I show this in the video 🤔 I don’t have it installed at the moment I will check when I am back from holiday
@brianpotts98992 жыл бұрын
Great Video, what is the make of the quick release scope mounts - I take it they don't come with the Element Nexus?
@Airbuks2 жыл бұрын
Thx , I indeed that doesn’t come with the scope 😉 it’s from a company called Spuhr . Very good but very pricey 😬
@brianpotts98992 жыл бұрын
@@Airbuks Thanks for the reply - do you know the Model number for the quick release scope mount you have?
@Airbuks2 жыл бұрын
@@brianpotts9899 don’t remember 🤔 but I have made a video about it 😉
@E30Allrad2 жыл бұрын
Which rail is this model because on NET the standard rail has 6 lower windows?
@Airbuks2 жыл бұрын
In the video I show the standard and compact rail . I believe these are the only ones 🤷♂️
@moekakke2 жыл бұрын
looks great but i'm still waiting for the power block and whatever fx makes to power up the M3... 🙂
@Airbuks2 жыл бұрын
Me to buddy 😉 can get the parts just yet
@moekakke2 жыл бұрын
@@Airbuks Krale in Holland promissed they would arive soon but still nothing there... I need the power block, tungsten hammer, upgrade pin in brass for regulator, 800mm barrel, barrel tensioner kit... you name it ... and you can not buy it... 🤣
@Airbuks2 жыл бұрын
@@moekakke indeed , I guess they will have it in stock soon
@MasonStormSunny2 жыл бұрын
@@Airbuks Please always mark a movie if there was any paid promotion, otherwise you can get a permanent ban from YT.
@Airbuks2 жыл бұрын
@@MasonStormSunny hi mate , thx for the advice 👍 but sadly enough there are no paid promotion. From time to time I get the product send to me but most of them are marked as promotional
@THAUB8LeejTub2 жыл бұрын
Hi friend, I have m3 sniper 700mm if I would like to buy a TRS rail like your how much it would cost me ? & where to order
@Airbuks2 жыл бұрын
Hi , I buy all my stuff at Krale Schietsport and the standard rail will set you back about 299€
@seyhmusaltunsoz36752 жыл бұрын
👍
@haopilelectronique2 жыл бұрын
Thebest
@Airbuks2 жыл бұрын
Thx
@axelstandoutspeakswithmusi4220 Жыл бұрын
😎
@Pham-Khoa Жыл бұрын
usable for fxmaverick ?
@Airbuks Жыл бұрын
Yes indeed only fits the impact
@DD-gq1uq2 жыл бұрын
Is that adapter available? I don't see it on ST's website
@Airbuks2 жыл бұрын
🤔 I also don’t see it , but as I explained in the video the adapter piece will be a limited run as in there next batch they make the TRS rail a touch shorter to eliminate that adapter. If you need it you can send them a mail I guess
@DD-gq1uq2 жыл бұрын
@@Airbuks i appreciate the info. I had already bought the full trail for my father in law which is why I'm looking for the adapter. He came across your video when it wouldn't fit.
@Airbuks2 жыл бұрын
@@DD-gq1uq try emailing them if you need it
@Matosh2 жыл бұрын
Do you think it will fit on a maverick ?
@Airbuks2 жыл бұрын
No it won’t fit the Maverick, the mounting points are different
@nanaktangu11012 жыл бұрын
Why didn’t you installed the spur mount?. It doesn’t fit or what?
@Airbuks2 жыл бұрын
You have to take a closer look at the video 😉 the Spuhr mount is still on it
@guillermoalzona2 жыл бұрын
Hello,will it fit the Maverick? Thanks
@Airbuks2 жыл бұрын
No this is specific for the impact
@guillermoalzona2 жыл бұрын
Hello, thanks for the reply
@Douger3182 жыл бұрын
my compact version i didnt use the shroud parts made poi shift
@Airbuks2 жыл бұрын
Interesting 🤔
@SHOOTER3258 Жыл бұрын
Can you instal them on mk2 impacts?
@Airbuks Жыл бұрын
Yes no problem 👍
@SHOOTER3258 Жыл бұрын
@@Airbuks can you pair trs with tension barrel? I have CF instaled too. Do you think all those three improvments work hand in hand together? Thanks for help!
@Airbuks Жыл бұрын
@@SHOOTER3258 yes you can pair it but you need the correct barrel clamp as the tensioning kit is thinner . They work hand in had and should give you a improvement 👊
@touray692 жыл бұрын
Cud you try it on a maverick
@Airbuks2 жыл бұрын
This rail is only for the impact 👍
@leticiabraun2909 Жыл бұрын
Nice rail, but morbidly expensive !!
@Airbuks Жыл бұрын
Yes indeed , it’s about the same price as other options for the impact .
@RyanKingLogue5 ай бұрын
A very appropriate word in my opinion 😂
@user-zu5fj6yu3f10 ай бұрын
I live in Thailand Where can I order?
@Airbuks10 ай бұрын
I don’t know that 🤔
@rachmanposo3399 Жыл бұрын
Pesannya bagaimana apakah di Indonesia sudah ada
@SandiWelah3055 ай бұрын
yes
@fadilfadil91212 жыл бұрын
Cek berapa harganya
@andrywidjayakusuma86732 жыл бұрын
Heavier......
@Airbuks2 жыл бұрын
Yes a little bit , but with more rail added it’s normal 😉
@andrywidjayakusuma86732 жыл бұрын
@@Airbuks 😁
@falconwhitney2 жыл бұрын
Saber Tactical is the most over triced parts out there.