FX Dreamline Multi Purpose Tune

[@JM10344]

Really great job, you crafted the best of both worlds. Your thought process is top notch. This video is going to sell FX a lot of those guns.

[@Airbuks]

😂 I just try to share my findings

[@vivendodanaturezaselva1867]

Hello my friend, this rifle is too beautiful, and must be very good in power and precision ,,, great video ,,, save here from Brazil

[@leftymadrid]

Excellent! Yes, nowadays Air guns are very impressive! I have been using them for years now. It's a world apart if you regulate, as accuracy is just incredible! Mind you, I have very expensive air guns, but incredibly and oddly enough, I just finished a super tuning on a (S200 Air Arms) and this little gem is scary accurate! And in the right hands it becomes an incredible pesting/hunting sniper :-) actually when out on the range, people have been aroused and can't help but to ask questions after seeing the paper targets! Grouping is incredible out to 85 yards... As for FX airguns, the impact, maverick, and dream line products, they are pretty much a work of art.

[@Airbuks]

Sweet , Air Arms makes some incredibly good airguns aswel 👍🏻

[@davebrailsford6699]

Big thanks i am in the uk and wanting to get the best out of my dreamline and this video as help set me on the right path to turning it the right way again big thanks..

[@Airbuks]

Thx , glad it can help !

[@hinanobubbie5257]

My friend and I were just discussing using the same FX Dreamline platform if we would be able to get a Sub 12 foot pound gun. Glad you were able to show the way. Tnank you very much.

[@Airbuks]

Sweet , good luck 👍🏻

[@elbrens2015]

The most beautiful thing about it is its strength compared to its weight and size

[@Airbuks]

👍🏻 totally agree

[@nielgaming3155]

Beautiful FX Love from Philippines ❤️

[@johnnyventurino8947]

Only you can achieve something like that my genius buddy.

[@Airbuks]

Thx 🙏🏻 buddy

[@hotchihuahua1546]

I have to commend you on the amount of work that went into this video , I like the idea of a small , light and effective back yard plinker and varmint exterminator .

[@Airbuks]

Thx mate , I appreciate the support. This build is one of my favorite ones when it comes to light weight , portability and power ( if needed ) since the tune I don’t touch it anymore 😉

[@GeKo1966]

Wow!! Impressive work Airbuks!!Genius!! Bravo! 🙏🙌💪👌 Almost wanting to also get a dreamline now!!!! FX take my money and pay the Airbuks dude some royalties! 😁💥💥💥 Would love to see if this also could be done on the Impact 😉

[@janrobertbos]

......and an interesting one, once again...thanks!

[@thomasvaneil3517]

Good video, very close to my own tune. I love my dreamline tbh. Pretty cool. I did notice you didn't mention the Extreme spreads of the results. I was wondering more or less what you were getting there. Mine has still a little too high ES in my opinion. I enjoy your videos, keep up the good work!

[@Airbuks]

Hi , indeed I didn’t mention it 🤔 . On high power when fresh filled it has 10fps ES when the fill gets to 200bar I am getting about 5 FPS ES . On the low setting the ES is about 8 fps during the whole string with better spots during the string

[@snipersnipe4259]

Good job bro hope to c see more video👍 dreamtac wit dual plenum in future

[@Airbuks]

🤔 then I would have to change the valve in this one to a bigger size .

[@snipersnipe4259]

@@Airbuks I don't get it sir why bigger valve is there bigger valve

[@Airbuks]

@@snipersnipe4259 the Dreamline I have is one of the first models , the newer models have a bigger valve opening to allow more air to pass during the cycle of the valve . If I put 2 power plenums on mine it won’t make a difference unless I upgrade the valve , if it’s possible 🤔

[@snipersnipe4259]

@@Airbuks thanks bro for ur reply .i think u will need 20153C1 valve longer 1

[@brianrousch2246]

Great video.But even though i rewind,i can't keep up.Could you post the actual finished recipes pls.I bought a Dream tact,now to tune it..Thanks

[@Airbuks]

Sorry buddy that’s ver long time ago and dont own the Dreamline anymore. But if you follow the steps you should ba able to reconstruct it as copy dienst yield alway the same results if you don’t live in the same region or country

[@doomfathertm8771]

I tried to do the opposite from sub 12 dreamline to the 950 fps capable dreamlines you see in many video's, I got all the parts, power plenum, high flow transfer port / pin probe etc... from huma, but I soon found that the hammer spring is too week to open the valve at higher reg pressures, I checked, my gun does not have the weaker 12 ft/lbs hammer spring, it has the normal one but even at max hammer tune it cant even open the valve at 160bar. I had to stack a LOT of washers behind the spring just to get it to open the valve a little at 145 bar. No idea what is going on.

[@Airbuks]

I guess your hammer is to light for this

[@doomfathertm8771]

@@Airbuks I ordered the heavy one from Huma, thanks.

[@Airbuks]

@@doomfathertm8771 it also might be with testing the med high and low setting to see if it’s correct labeled. I have seen a video where they achieved more velocity on med then high , so I assume there where was in the wrong orientation or incorrect labeled

[@doomfathertm8771]

@@Airbuks Thanks, yeah I already took that off and checked, I think it had a UK 12fpe port as it only had 2 VERY small holes in it, but I have replaced it with the right one with the bigger holes in. Although it was annoying I dropped the small detent ball into a pot of shotgun shot of the exact same size balls lol

[@Airbuks]

@@doomfathertm8771 🫣 that can keep you busy

[@heathhalfhill6867]

Awesome tune boss. Cool knowledge. God bless.

[@Airbuks]

Thx

[@airgunballistics1779]

Nice video! 💥💥📈

[@franciscocarvalho2424]

Show like garantido sempre vídeos top

[@CatCustom]

Love this dreamline compact, would like to have one in addition to my impact. I see your dreamline compact with a power plenum and 300cc bottle, what I wonder is that the 480cc bottle would fit without the power plenum?

[@Airbuks]

Yes it will fit but the bottle will be longer the the barrel in 22 cal , maybe with the 25 barrel it will be fine 🤔

[@rolis.j]

I need tune my compact,still after 5 times huma reg leaking air,i give up on huma and will use fx reg that not leaking

[@Airbuks]

🤔 are you sure you have the correct regulator version and belville stacking order ?

[@davidausterman5915]

Very informative video! After you added the power plenum and probe mods, did you leave you reg at 75 bar?

[@Airbuks]

Thx , no I looked back at the video aswel to see 🫣 but after putting the upgrades I putted the reg at 150bar and then I used the hammerspring and TP dail to get to sub12

[@davidausterman5915]

@@Airbuks I won’t have the probe and plenum, but your video gave me lots of valuable info to work from. I will be using .22/18gr JSBs so hopefully I should be able to tame it down with port on low and maybe reg less than 150. I will need to get the feel on the FX hammer preload adjustment.

[@shahriar907]

very helpful video...love it.

[@Airbuks]

Thx 🙏🏻

[@Kincop]

Can you take a guess how many shots these two setups will have with a 220cc cylinder filling? 85 shots with 12fpe/UK power? 50 shots with full power?

[@Airbuks]

Hi , that’s a good guess. If I make the theoretical calculations I get 55 shots FAC and 88 shots sub12

[@Kincop]

@@Airbuks Thanx! Im trying to find out a "eco-tune" and a "power-tune" with my Dreamline Classic 22 FAC, like you did in this video.. But my rifle does not have a external hammer spring adjuster, have to take off the stock and use a Allenkey😔👍🙏

Hi great video! Is there otherways i can contact you I need some advice for my impact? Story is to long to take it here 😁 Thanks

[@Airbuks]

Hi yes , you can mail me ( [e-mail] ) or you can find me on insta chat / Facebook messenger 😉

[@top-lul7540]

Dat is zo ontzettend mooi hè zo'n tactical ik denk dat ik mijn dreamline classic ook is om ga bouwen

[@Kennnyboy888]

Is the barrel support something you 3d printed? And do you find you need it for such a short barrel and barrel shroud?

[@Airbuks]

Yes I printed it , I do use it when attaching a heavier moderator to it . It helps for the droop and harmonics Even with such a short barrel it makes a difference

[@Kennnyboy888]

@@Airbuks yes, that makes sense. I have the Dream tact compact, and when I attach the Wiehrauch XL moderator, the POI shifts quite a lot.

[@maddias291]

Unfortunatley we german Dreamline owners are left with a crippled gun with no adjustable transfer port. We´ve got a fixed low transfer port and our valve pin is modified so it will break if you put too much force on it. 7,5J is a pita to tune.

[@Airbuks]

Sorry to here that mate 😞

[@markjohnson2166]

Hi, what is the regulator setting for this tune please ?

[@Airbuks]

About 150-155 bar

[@horstwittmann5198]

Ich wünschte mir Grossaufnahmen (close up) von der jeweiligen Einstellung (Position) der beiden Räder. (Power adjustier Crown).

[@maddias291]

du hast doch nur ein Rad ;)

[@jamesdenny4734]

👍

[@jaypeemagno7044]

👏❤️👌👍🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻

[@mabthoj8308]

ສະບາຍດີງາມຫລາເນາະ

[@johnairgunner5809]

I like your videos but tunning seems to be unknown area for you. From max to min 682 - 677 fps means your gun is completely out of tune, just waisting air, giving up accuracy. 300cc bottle gives you 118 shots. For comparison my 177cc tube, reg set 112bar, muzzle energy around 11.5fpe give me 160 shots. From min to max - 550 - 810fps. It is .177 of course. Teg made good and short tunning lesson from shooter perspective, giving some basic ideas. Regards, John

[@Airbuks]

Hi , thx for the comment 👍🏻 but are you sure you have watched the hole video ? The purpose of this tune was to make my FAC shoot 18gr at 830 ( 860 max ) and at the same tune by just a few click get a sub12 with 18gr at 540 . If I would restack the regulator you can achieve more efficiency but then you can’t get to the 860 . But I will be sure to check the video 😉👍🏻

[@johnairgunner5809]

The hammer spring pre- tension screw is set too high to make power wheel makes no difference when set Min/Max. Unscrew it and you can utilise power wheel for this purpose and use transfer port LOW. You will be surprised

[@johnairgunner5809]

I made similar error first time I tuned my gun following someone's tips on KZbin.

[@Airbuks]

@@johnairgunner5809 when it’s set to high , the powerwheel does make a difference by 10-15 fps every step on its low setting it doesn’t do anything indeed but that’s not the point of this tune . This tune was very accurate out to 75m with 18gr . But you are right if we speak about a tune focusing on one velocity not trying to achieve a hybrid version. Then I would approach it differently.