(Airgun of the Year 2024) Hatsan Factor RC Sniper Long Review

This is a full review of the new Hatsan Factor RC Sniper Long. This outstanding PCP air rifle impressed me so much, I named it Airgun of the Year for 2024. This Sniper-L review will give you an up close look at the Factor RC Sniper as well as test the accuracy and power. As a Bonus, I will show you how to tune the Sniper Long to shoot 25.4 gr FX pellets at thier most accurate speed. This is one long range PCP rifle that you don't want to miss! Thanks for watching! -Nate
You can find your own Hastan Factor RC Sniper Long at Pyramyd Air by clicking here: www.jdoqocy.co...
My Helix sight is available here: www.tkqlhce.co...
FX Pellets .22 caliber 25.39gr are here: www.dpbolvw.ne...

[@Wickedstickyflowers]

You got a video on how to adjust regulator on rifles that allow it to I know it says don’t lower pressure wile pressurized? I don’t know what I don’t know

[@AirgunChannel]

Yes, DO NOT lower the regulator pressure when there is presure in the gun. Remove the bottle, then pull the trigger till the guages read 0. Then lower the regulator most the way, The re-pressurize the gun for 250 bar, and turn the regulator UP when there is pressure in the gun...watch the dial as you turn it up. Thank you for the comment! -Nate

[@jesusloaiza-fr3tx]

​@@AirgunChannelque costo

[@BigBassTurd]

@@jesusloaiza-fr3tx they are $1,199.00 right now

[@williamwilson2624]

That's a pretty cool looking rifle! Thanks for showing off those vintage targets. Great review, as always!

[@AirgunChannel]

Sure. Those targets are fun to collect! I have about 10 of each style. I have the Chickens that are Ducks...very rare.

[@gboutdoors5198]

No joke I got a dime sized 10 shot group at 200 yards with my daisy 880 using crosman pointed copper pellets 😎😎😎😎 (I feel like I see these types of comments everywhere)

[@AirgunChannel]

That's awesome! I don't use those pellets because I'm afraid they will ruin my barrel from being too hard.

[@gboutdoors5198]

@@AirgunChannel lol that comment was a joke just so you know 🤣🤣🤣🤣

[@Leadheadsam]

Thanks for another great review 🙏, this is a great looking rifle and accurate/powerful w good shots per fill 👍

[@AirgunChannel]

Thanks man! -Nate

[@gboutdoors5198]

Holy crap that thing looks sick and preforms sick

[@AirgunChannel]

Oh yeah.

[@corycampbell1013]

Thank you so much , you really do a great job on all your reviews, much appreciated, very well done sir

[@AirgunChannel]

Thank you for tunign in and for the kind words! I appreciate it! -Nate

[@robertpiontkowski2164]

Ordered and used your link 👍🏻 great review

[@AirgunChannel]

Wow thanks! I just made $60. Steak Dinner on Robert tonight! Thanks bro! -Nate

[@Mikegastaldo]

Hi Nate thanks for reviewing this.. I've been waiting for months for you to get do it... I really want to buy this rifle but im scared because of all the bad stuff so many people are saying about their experience with hatsan quality...i really don't want to spend a grand and get burned.. really not sure if im going to buy one or not at this point...and the vintage targets are awesome 👍... anything from a time when America made the absolute best stuff on earth is amazing..so sad how all that has changed tho..god bless 👍

[@AirgunChannel]

Mike, You just have to shoot your Hatsan alot at first and if it's not performing right, return it. PY Air has no questions asked return policy. But if you want for sure quality, just spend $1200 on an FX Dreamline or maybe a Katran. Lots of good stuff for $1200.

[@Mikegastaldo]

@@AirgunChannelAs interesting as this thing is and as long as I've been waiting for it to come out....I think I will take the "for sure quality" route .. thanks Nate.

[@gutiguti3914]

Excelente video como siempre y el Hatsan presicion total 👍👍👏👏👌👌🧉🇦🇷 saludos

[@AirgunChannel]

I love the Factor RC models. Thanks for watching! -Nate

[@daves984]

I've been eyeing this in .357 for a while now.

[@AirgunChannel]

.357 is gonna be bad ass! I may get a .30 though.

[@chriswedgworth]

That is one awesome looking gun I think I need to save up for this one

[@AirgunChannel]

Yeah...a real Sniper Air Rifle!

[@juniorimac]

I’m very very impressed. Shoots better than my wildcat

[@AirgunChannel]

That's definately a compliment. You may need to tune your FX or use different ammo. Good luck!

[@romeoalphafoxtrot9517]

Great review Nate! That gun looks fantastic and shoots lights out! Hatsan has really stepped up its game with this one! 1/2 the price of a lot of higher end guns with equal accuracy and power! I wonder how it would do with slugs?

[@AirgunChannel]

I agree. The Throne 2 is also pretty nice for $849-$999 kzbin.info/www/bejne/Y3nWg2uPrs2rq6s

[@edpenkalski8937]

Definitely not air gun of the year .... Quality control and customer service at hatsan usa sucks .. if you buy it grom pyramid air make sure you pay the extra money to have them test it tune it and do a leak fown test or youll be sending it back ...

[@AirgunChannel]

What is your vote for airgun of the year? Throne 2? Reximex are jerks ..so they got disqualified.

[@sivaman2232]

Taipan2

[@edpenkalski8937]

@@AirgunChannel it's such a hard call Iean air gun of the year shouldn't be something that the average person can't afford so expensive guns the the huben gk1 are out, the aea-bintech t9 is one of the most impressive airguns I've fired this year but on the same hand AEA and bintech sometimes have small issues. Machineing isn't always perfect so till more people.get their hands on. I'd have to wait see how the quality control is. I'd say the gauntlet SL .30 but it's a remake of an older rifle so it not really a new gun for this year... I'll have to think about this one .. the western sidewinder or rattler...

[@edpenkalski8937]

And technically the sniper l is just a remake of tried and true gun ... But honestly Hatsan has quality control issues too my jet the shroud is off from the barrel so I can't use a moderator on it and I had to replace all the o rings on it when I got it because it would hold air for longer than an hour

[@edpenkalski8937]

How bout the umarex hammer... It's affordable powerful, accurate and budget friendly ....

[@Tonyplat98]

Maan these are out of stock but I think I'll pre-order mine. Gonna choose the .25 caliber but thank you for the video it's an amazing air rifle great for plinking

[@AirgunChannel]

If you use the link I will get 5%. Yes, pre-order for first delivery!

[@jesuscontreras557]

Absolutely amazing 👏🏼 🔥🔥

[@AirgunChannel]

That's what I said. Thanks for watching! -Nate

[@josefgerken4002]

Like the gun, don’t care for Hatsan. I’ve had 3 fail on me. I think I’m still going with an FX impact and hope it doesn’t leak.

[@AirgunChannel]

I had a Sortie, Didn't work, sent it in. They didn't even repair it, just sent it back knowing the 3 month warranty would expire before I could send it back. Dirty!

[@brostelio]

I'm afraid it will at some point. But it's definitely worth it!

[@stiannunn5113]

@@AirgunChannel Did you send the FX to Sweden Or can they fix FX in US? love the show best regards frm Norway.😊

[@jean-claudelaboy9679]

​@AirgunChannel did you buy a broken refurbished gun? Cause hatsan has 1 year warranty regardless of who you buy it from, I've had my share of bad parts with hatsan but they have always stood by to help me out in the process. I've even been given to different barrels to ensure I got one to shoot to my liking.

[@Cisco1322]

That’s definitely my next rifle. It sounds like power, looks amazing and easy to tune. That one definitely is a must have. Would of liked to see you shoot some slugs out of it

[@AirgunChannel]

Yes, that thing is great.

[@edpenkalski8937]

@@Cisco1322 check out the Benjamin bulldog or the umarex hammer if you want reliable big game air guns you won't be sorry and look in to the reviews before you purchase a Hatsan if you get it through pyramyd air definitely have them do the test and tune for the extra 45 bucks to make sure you get a properly working rifle it definitely worth the extra money you don't want to deal with Hatsan customer service

[@Donatello40973]

I prefer the Hatsan Factor BP , it just has more power , and bigger sluggos . I'm a firm believer in ' Bigger is Better ' when it comes to air rifles. 😊

[@AirgunChannel]

BP is awesome

[@acsaenz1]

I have the Hatsan flash in 25 and the flashpup also in 25 and both hit bullseye at 35 yards every time.

[@AirgunChannel]

I love the Flash. A new regulated version is coming soon. I can't wait! Thanks for watching! -Nate

[@braddbradd5671]

Nice bottle cover they are actually a good idea it protects the bottle and also gives you grip shame they dont have a full bottle cover you might be able to get them online

[@AirgunChannel]

They have been including that one cover on guns for a couple years now. A full one would be great!

[@braddbradd5671]

@@AirgunChannel There you go there is a market for them out there when i used to play paintball they were a nice and cheap upgrade in the end essential in competition games but you can also have many different designs so you can mess around with them

[@arturslunga4226]

Epic rifle and epic video! Edit: Ordered one yesterday

[@AirgunChannel]

Thanks man!

[@javaligo9059]

Parabéns pelo seu vídeo meu amigo, que bela ferramenta.... Uauuu!👏👏

[@AirgunChannel]

Obrigado! Tive sorte de conseguir fazer algumas boas fotos para o vídeo! Obrigado por assistir! -Nate

[@Brianbri-nq3cc]

Now that's what I like to know is what the power/speeds are that these airguns are ABLE to produce👍👍👍 NOT the recommended speeds or speed that other people like to shoot at🤮 Please let me/us know what the max power the guns can produce in the future like in this video, because many of us like POWER for slugs, thanks bro👍👍👍👍

[@AirgunChannel]

That gun was turend up less than half way. it goes to 85 foot pounds in .22 cal

[@Brianbri-nq3cc]

@@AirgunChannel Yep, I love that you showed what it can do💥🏆👍👍👍👍👍👍

[@TacticalJackalope]

It's very interesting but it's fugly and it costs what several of the entry level FX guns cost(In the U.S.). I'd have to pass Nate but thank you for sharing.

[@AirgunChannel]

Right on Jackalope! I agree you can't beat an FX. I'm reviewing the $999 DRS in a few weeks.

[@edpenkalski8937]

Yea you're way better off with a gauntlet SL in .30 than this gun that claims 81 fpe 😂 even at 1175 with a heavy slug you're not gonna see 81 fpe and if you were lucky enough to pull off 81 fpe your gonna end up seeing how bad Hatsan USA sucks at customer service.. my buddy bought two of these on in 22 and one in 35 and after a day and a half of ahpoting them both the typical hatsan problems started and at no point did it get. Lose to the fpe advertised reliably

[@palmer3977]

Superb accuracy.

[@AirgunChannel]

Yes, I would call this Hatsan's "Flagship" rifle.

[@christophersherratt7299]

To fix the grip get 2 1.5mm drill bits then drill the hand stock snap bits for pegs insert with JB Weld remember to put them 2mm below grip then get a sample of the wood file it collect the dust mix with pva then give it a very light sand over hole's and across broken line light varnish good as New

[@AirgunChannel]

I had them send me a new grip.

[@franckkunys3156]

bonjour a toi super tes videos merci que pense tu de la qualité hatsan et encore merci

[@davesmith4804]

I think i would be keeping that, here in the UK we can only have a pea shooter 😢

[@AirgunChannel]

Yes, too bad.

[@Drlaserzz]

I want to see airgun depot or pyramid carrying stuff like the taipan. Might jusr get the wcout epoch

[@AirgunChannel]

Use my link if you get an Epock. I'll make 5%. I think PY Air sticks with brand they know and won't likely branch out in the $1500+ gun category. They already sell FX

[@christophersherratt7299]

I bet you was F - ing like mad when you broke the bottom of the hand grip i would of been crying 😂😂

[@christophersherratt7299]

What you need to do is get 2 1.5 mm drill bits then dill the piece that's broken snap the bits for pins then insert in the wood Making sure they seat 2mm deeper find what wood they used get small piece a sample of ebay for postage cost then collect the dust mix with glue for the 2 holes then very light sand over the pins and where it was snapped New coat of varnish and knowone would NO you broken it

[@AirgunChannel]

I was but I just had them send me a new one.

[@longhauldawgs]

I had that Beauty on pre-order. However, they kept pushing the release date back. So I just went ahead and invested in the FX Dynamic express 700.

[@stiannunn5113]

Are you happy with ur FX?

[@longhauldawgs]

@@stiannunn5113 So far so good. I have only had it for a month, but put over 100 rounds through it with no issues. I am not crazy about the rear mounted air tank, but it’s not a deal breaker.

[@stiannunn5113]

@@longhauldawgs Ok that sounds good. 🙂 No i agree i dont like the rear tank either.

[@AirgunChannel]

Good call. The Dynamic is ready for slugs (the Future). Get ready to reach out!

[@AirgunChannel]

Good question. Do you need to ad parts to get full power?

[@Armadurapersonal]

looks awesome! but i'm not a fan of the stock. do you think something like a magpul prs might fit? it should fit most AR stocks right?

[@AirgunChannel]

Not sure, it might. The specs may say if it's an AR grip. They included and extra grip that is just black rubber.

[@HarryPredator]

Top gun...nice videos 👍💯

[@AirgunChannel]

Thanks man! I did my best on this video. Sometimes I don't! Thanks for watching -Nate

[@slingshotwarrrior8105]

impressive, bro

[@AirgunChannel]

Yeah, I like this one!

[@user-uj2nc7eg5f]

Wonder ful yaar

[@AirgunChannel]

I agree! Thanks for watching! -Nate

[@norcaloutdoor5462]

Wow! so nice

[@Huyen-Anh]

Love pcp

[@AirgunChannel]

So much good stuff about it. I like the silencers.

[@martinharnett6922]

That's a good looking gun😮

[@AirgunChannel]

Yeah...you should see the S model!

[@beanaddict]

Hey Nate,whats your oppion on were these airrifles are going,each week you reveiw another awsum rifle.😉

[@AirgunChannel]

I think there are too many choices...which makes choosing one hard. I think if your rifle does not shoot pretty much perfectly, you will not be able to release it in the USA...Hell no! Air rifles will begin to shoot slugs and the distances will get really far. Like 200-300 yard shooting will be easy. I may start doing my own ammo with slug press (if they give it to me for free of course), it's about $3k but you cna make any weight and diameter slug in your garage for almost free. Air Force owns the brand.

[@beanaddict]

@@AirgunChannel keep on with the great reviews buddy.

[@micaelvillanueva9630]

Nice one

[@AirgunChannel]

Yes, I liked this one too! Thanks for watching! -Nate

[@sidbates3423]

It looks pretty heavy more like Bench gun more so than tracking through woods, how is it shooting free hand ?

[@AirgunChannel]

Sorry, forgot to try that!

[@davidsricker2338]

Dude if you mean business shot placement and shhhh is everything

[@AirgunChannel]

I agree!

[@experienceprecision5406]

Hatsan makes reliable AG's but I have to have a bullpup config since I use my AG for squirrel hunting and carrying a 4' 10#plus setup in the woods is no fun

[@agustina-tl9uj]

good ❤❤❤❤

[@AirgunChannel]

It's a great choice!

[@kmlok]

I've had several Hatsan but their customer service is going to crap. They're ignoring emails for parts on my original Factor RC. I was so looking forward to the sniper but with no support, it's not worth it. And that stock isn't mil spec as advertised. I wasted a nice chunk of change on different buffer tubes to change the stock and it didn't fit. There's a lot that's good about the sniper sniper but it's not all it's claimed to be.

[@AirgunChannel]

Yeah their Customer Service Dept. is scandalouse. A bunch of crooked thieves. I am one of thier victims.

[@toddlish1892]

Great video, What state are you in?

[@AirgunChannel]

Oregon

[@TacticalJackalope]

@@AirgunChannel Really? Is your county one of the one's that voted to join Idaho?

[@RickyD1968]

Why didn't they make a 30 cal ????

[@AirgunChannel]

They did. Check here: www.pyramydair.com/product/hatsan-factor-sniper-long?cjdata=MXxOfDB8WXww&m=6171&page=1&query=sniper+l&lang=en&searchConfigId=643645070c547549270ccc15&.pyramydair.com&Airgun+Channel&cjevent=5bdae56f395e11ef819201040a1eba22

[@airgunningyup]

if only theye could shift more weight to the front (-;

[@AirgunChannel]

There is also a shorter S model.

[@R3DB3ARD92]

Always keep the scope cross air level with the gun.

[@AirgunChannel]

Good advice! Because ammo falls straight down.

[@jefri7624]

Mantap akurasinya

[@AirgunChannel]

Ya. Senapan angin yang diatur memberikan akurasi yang luar biasa. Senapan angin terbaik Hastan.

[@jefri7624]

@@AirgunChannel 👍🏼👍🏼👍🏼

[@jamesdenny4734]

How does every caliber shoot over 900 fps? Usually, when you go up in caliber, the velocity goes down! 😮 🤔

[@AirgunChannel]

That 22 was only turned up half way. All calibers will shoot much faster than 900 FPS. but it's not accurate unless its a slug at over 950 fps.

[@janrobertbos]

...NICE!!!😀

[@AirgunChannel]

Yeah, That Sniper-L is a Peach!

[@cychael2011]

I owned Hatsan gun before. Hatsan customer support is bad. Sorry I will not go back

[@AirgunChannel]

It can be bad for sure.

[@kmom777]

Accurate but only with pellets I don't know how they put the word sniper and pellets together.

[@AirgunChannel]

It was only at half power. You can shoot slugs as fast as you want.

[@juhapenttinen909]

What scope you using?

[@AirgunChannel]

HELIX: kzbin.info/www/bejne/bYLVZn2dnrxoosk

[@heat147]

This rifle is designed to shoot heavy slugs with the slug spec rifled barrel and 300 bar working pressure ,manufacturer claimed it is capable to shoot 40 gr 22 slugs with 1100 fps before it was released, but rightnow it looks like, cound't filled up that power range and only can reach 925 fps with 25 grain "pellets" LOL, there are bunch of other better fit and finish options which can shoot exactly same with the 3/1 price and more compact package, result , basically you are paying more for additional nonse weight and size but nothing in function department another Turkish classic..

[@AirgunChannel]

It was only turned up half power in the video. It will shoot 1600 FPS if you want it to

[@heat147]

@@AirgunChannel Max level that we reached was 950fps with 33 grain slugs, there is huge difference between 1100 fps/40 grain claim, also rifle was not stable at highest power, barrel rifling also had couple issues minus to that it has horrible crown. sorry but not worth the 1200$, the funny thing is they coundn't managed to design proper air channel for smoother flow and looks like they still can't

[@mobileplay141]

👍

[@imdadalinaz]

Your videos are awesome 👍😎 but i heard somewhere hatean guns are not good enough, in india hatsam is making, actually copying various models from different gun companies, here in india hatsan with other company named camstar has copied the famous px100 Achilles, every model from precihole sports also glocks in co2 , but despite copying they couldn't provide the accuracy precihole provides, because the barrel of precihole is world class like Lothar Walther, soon precihole will export guns to uk

[@AirgunChannel]

Very interesting. Yes, a good barrel will achieve the best accuracy a gun can make. I'm glad you can shoot air rifles over there. Greetings from the USA! -Nate

[@imdadalinaz]

@@AirgunChannel we are limited to0.177 cal 20 joules ,after throwing some extra bucks we can get whatever caliber we want in high power , not legal though, but if we can throw some extra bucks, we can get bigger calibers with no power limit 20j.177 limit was set in 2016, before that we used to shoot .22 , now my buddies are getting FX all the way from 0.177 to 9mm

[@cirylkratkohlavy5683]

iam waiting on this in 25 cal in store

[@AirgunChannel]

Cool, if you order through my link I'll get 5%. You pay the same. Thanks bro! -Nate

[@gboutdoors5198]

When are you doing a review on the zelos?

[@AirgunChannel]

It won't be out for about 3-4 months.

[@joedokes8641]

There are videos of the Snowpeak M60 ( same gun ) ? Umerex just put there name on it .

[@gboutdoors5198]

@@AirgunChannel Alright cant wait!

[@gboutdoors5198]

@@joedokes8641 Oh dang umerax loves snatching stuff from snowpeak

[@joedokes8641]

@@gboutdoors5198 You said a mouthful there bud as in Notos = Artemis pp750 🤔🤣🤣🤣🤣🤣.

[@fredcarter7003]

Your link to pyramid air, doesn’t link up

[@AirgunChannel]

Your the second person who said that but it works OK for me: kzbin.info?event=video_description&redir_token=QUFFLUhqa1FjTUhvZVpmMXJpLWJiMWtCaU1QNW5ZX1lJZ3xBQ3Jtc0ttRjdzVVN2RFpQbndxbDUyRWIzU0wzTG1OZVpmQnF1cXF2NFJLZXZESndXTWQ3a2NEc3VYNUtQb3cyMFZpOHBNWWZKUTVkY05YWjRkcnBueHpqcjZSaDJSYTBDcmF0ZXRYM2V3ZUwxOEQ5NDlVZVY1cw&q=https%3A%2F%2Fwww.jdoqocy.com%2Fclick-100005961-12817065%3Furl%3Dhttps%253A%252F%252Fwww.pyramydair.com%252Fproduct%252Fhatsan-factor-sniper-long%253Fm%253D6171%2526page%253D1%2526query%253Dsniper%252Bl%2526lang%253Den%2526searchConfigId%253D643645070c547549270ccc15&v=0ZHuNVW_PIE

[@tommanning7337]

🤘🏻😎🤘🏻

[@AirgunChannel]

Thanks bro! Party on! -Nate

[@YDCFF_]

I like the rifle, but the fact you can't shoot slugs was a deal breaker..

[@AirgunChannel]

Is that a fact? I don't remember saying that. Just turn it up. It was only at half power.

[@YDCFF_]

@@AirgunChannel You didn't say that bro. Pyramid air told me that when I asked... I went to the link in the description and the live chat popped up. I asked if I can use slugs and they said unfortunately not with this model. I was going to buy it.

[@akngoksun4853]

👍👍👍

[@AirgunChannel]

Thanks man!

[@Bemx2k]

What tripod is that ?

[@AirgunChannel]

TalonTunes Mini of course: kzbin.info/www/bejne/nWSqnmysZtefkMUsi=J1j5RS2L9tTAlieS

[@hunterx2210]

it's feels like i'm look at the msr but air rifle version

[@AirgunChannel]

What gun is that?

[@hunterx2210]

@@AirgunChannel Oh, I forgot to type the full name. It's Remington MSR

[@jjohnson-stoker]

Just dont lean it against the wall coz the barrel is so poorly supported it'll go way out of aim. Dont even knock it, its such a delicate balance. Other than that, for the money theres fun to be had. But the big, silly plastic magazine is another issue it has.

[@AirgunChannel]

The barrel it tensioned pretty hard.

[@jjohnson-stoker]

@AirgunChannel on my standard factor there's just 1 Allen grub screw securing the barrel into the block. As it came, it was a sloppy fit, so I shimmed it with a wrap of thin aluminium from a beer can. That made a huge improvement. Here in the UK they're limited to sub 12 ft lb but it's so easy to get past the anti tamper and get that up to 50ft lb with a 34 grain pellet. AND it's easy to return to sub 12 so as to be completely legal.

[@WahengbamnaochameiteiLuw-qz5rj]

bro delivery available how much price

[@AirgunChannel]

Link in the description. Free shipping.

[@MSSean-md9vf]

too bad you dont also show maxed out for power and distance for each pellets including slugs???

[@AirgunChannel]

Hatsan would have to pay for to do that. If you shoot over 950 FPS you will get 6 inch groups vs 1/2 inch groups.

[@MSSean-md9vf]

@@AirgunChannel Use slugs/boat tails etc push the power, its nice to see the limits. If all the rifles are always using the same fps it's little boring. Of course drag ballistics ie Diablo I understand that 950. Pushing the power, barrel length and twist even distance etc is cool. When someone has drops at shorter distance it just means underpowered.

[@MSSean-md9vf]

@@AirgunChannel even in this case with 6+ inch groups it still would have been neat to see it maxed out and the havoc that would result on board and fruit target etc...lol

[@MSSean-md9vf]

@@AirgunChannel have good wk in any case

[@AirgunChannel]

Watch Airgun Alley Miami review the Sniper-L !!! kzbin.info/www/bejne/roHdqZqlpLCIrLMsi=SfSC56a72BG3FXzm

[@AIRGUNZ_MILITIA]

smiles both videos are really good, but i was wanting to see the .357 sniper long in action giggles, but thanks true good review and that is all we ask for nate the last word @airgunz_militia you tube

[@blackdragon6982]

How can I purchase this sniper

[@Wungshi]

Price detail please😊

[@AirgunChannel]

Link in the description to buy it.

[@cordellej]

screw pellets use slugs in that and tune that for 1100 fps

[@AirgunChannel]

You could do it. That was only turned up half way.

[@cordellej]

@@AirgunChannel thats my kinda rifle , to me pellets are like a prop ww2 aircraft and where in vietnam with migs and f4 phantoms ( slugs) doh get me wrong they both have there uses

[@northeastverminhunters]

bought the factor rc here in uk didnt come with adjustable reg or hammer utter junk

[@AirgunChannel]

The Factor and Factor RC are different guns. The Factor should suck for $600

[@2002ZRX1200R]

Zoom in.... Lol

[@AirgunChannel]

It ain't 4K! I have to really zoom in.

[@juandeleon6980]

Does this beast like slugs?

[@AirgunChannel]

I did not try them but you can tune it to shoot any power...it was only half way turned up in the video..at half power.

[@balboaroucky9795]

Hatsan win compétition ?

[@AirgunChannel]

I would not go that far. You need an FX for that

[@Rantybughawbuhaymangingisda]

Magkano

[@Crimson_626]

Gun is "Ridiculously" Long!!! oh shieeeetttt. Bench Rest gun....Only!!! thats it.

[@AirgunChannel]

You want this: www.krale.shop/us/hatsan-factor-sniper-s/

[@Crimson_626]

@@AirgunChannel This is the "Shorter" version of the Factor RC??? Looks really sweet. Can you put a longer barrel and cylinder if you wanted to? make it a full size version? are the barrels removable and cylinder? Does this gun need a "Moderator" is it backyard friendly ?

[@midwesttacticalair7742]

Hate Hatsan 💩💩💩

[@AirgunChannel]

I also don't really like the company, they are dirty scumbags, but this gun shoots well.

[@adrianwhite277]

Loud it seems

[@AirgunChannel]

No, it's not loud.

[@NHATNK]

Chay tac ok

[@AirgunChannel]

Exactly! -Nate

[@gboutdoors5198]

Me want

[@AirgunChannel]

Pre-order through the link and I'll make $60!

[@gboutdoors5198]

@@AirgunChannel Man thats some big bucks but sadly I cant afford it but one day I will!

[@LessLethalDad]

Looks like the gk1 on roids

[@AirgunChannel]

Good one!

[@scinner28]

LOL i know allot of turkish people ..They shoot at a 100 and more..some did show it on youtube ..at a 100??? they say🤣🤣🤣 .I dare you to make a clip at lets say 125 ore 150 yards.If it is dimesize i shut my mouth and will say sorry i was wrong.Very wrong .at 70 yards maybe ..40 yards ..UHM 400 euro guns will do the same?.

[@AirgunChannel]

I may be able to get a quarter at 100+ yards. Not a dime. If Hatsan would help with these videos I could do stuff like that, but not untill then. Show me the money! -Nate

[@scinner28]

@@AirgunChannel Oke man check all the youtube clips ..all the negative are gone 🤣🤣🤣 maybe they paid them like they did ..for the semi auto pistol .1 guy just 1 guy did not take the money and you still see his clip on youtube ..the only 1 guy..so funny .. kzbin.info/www/bejne/fYbYZJKKerB9f6s

[@faithfulwarrior7]

It looks like a PSG1 snipee rifle.

[@AirgunChannel]

Yeah, feels like one too! Really cool gun!

[@AIRGUNZ_MILITIA]

smiles but what if i just want to use my AEA challenger .22cal with 40gr hnn hollowpoint slugs at 912-920 fps instead nate? the first 15 shots with a 3600psi fill will be within 20fps of one another and that is 60+fpe in .22cal with a 24 inch shrouded barrel and no supresser needed , just put some thick felt in behind the barrel spacer wrapped around the barrel and it is quiet and short in longstock version looks like a kids rifle at 6.5lb and just slaughters a target. 24 shots within 50fps of one another on that 3600psi fill. and a third the cost of the airgun you are holding. smiles i got a reg for it, but it just does ot need one, really don't need the power wheel either. just change velocity with weight of the projectile. and smile when you ppull the trigger. the alst word @airgunz_militia

[@AirgunChannel]

Yes, try 925 or even 950 with those slugs. The groups will elt you know if you succeded.

[@AIRGUNZ_MILITIA]

@@AirgunChannel plan on it after i have had the challenger for a year i will increase the barrel port diameter and thus the velocity by another 20fpe, and will have to use the power wheel to tune 40gr hnn slugs down to 950fps. but to get that now gotta fill tank to 4500psi and the shot string is different smiles, but i do understand ya. i probably sux, i an completely blind and till i get the parabolic mic on a rail i will only be shooting at 30 ft or 10 meters. but in my blind world a deer sized target at that distance is really something. i can hit it 47 out of 50 times completely blind. so for those shots you nake , i sux right now, but for the shots i make, can you do any better, lets say towel wrapped around your head and all ya gotta do is hit anywhere on a 6"x9" piece of metal. from 10 meters or about 30feet away. smiles you can even run a rope from the target to you so you know about what directio n it is when you slide the barrel along the rope. you can make a bench and square it off do you know what is the area of the shooting lane. you can even hold your airgun at the target while you wrap the towel around your head with the other hand just before you start shooting. but me , i am just blind, so i tap the sides of each wire in my square and aim at the middle and about where i guess 30 feet away would be at the height where i set the target metal, and i shoot and run bolt till it is done. smiles, what if something happened and you could no longer see where the target was? be prepared, it could happen, it very well could go dark for everyone, for a time. i just happen to be getting in blind practice now, for that day. and when my parabolic mic is scoped to a rail and zeroed. smiles hearing the heartbeat of a deer or hog, the chewing of berries or the rooting for roots hearing that at a hundred yards would be music to my ears. so i am inventing that device. i still only have the two plates that will adjust my pick mount left/right up /down... and if i had a dove 2 pick riser that also had adjustments like that, i would be good with my parabolic now. cause putting it onto a pick rail would be easy, but i need that adjustment so anyone could zero it on any rifle? i have not found a good adjustable pick riser from dovetail or pick 2 pick... anyway, hope you are blessed , the last word @airgunz_militia

[@junsalcedo6683]

How much the inite

[@AirgunChannel]

link in description