Sorting out the faulty trigger on the Reximex Regime

[@alanmullock381]

Thanks for the walkthrough Mark👍👍👍👍👍👍👍👍👍👍👍👍👍😎😎😎😎😎

[@simontanner]

Another very interesting video mark thanks for sharing 👍🏻

[@nickwebb9290]

An excellent, really well described video 👍

[@markhomer5704]

Superb vid , love fixing vids .. this was no exception ... gorra do a bit myself on the wife's R10 .. although I know I'll end up taking it to be fixed ..

[@shaneturner1649]

Hi love your vids on the regime i got 1 for xmas of the wife an love it watched ya vid on how to swap the cocking lever over brilliant 👍 yesterday my trigger stopped working went on your channel an found this vid now it works again 😂😂 thanks for these videos they are really helpful keep up the good work 👍

[@FirstStateAirgun]

Excellent video my friend

[@williamporter9928]

Great strip down , you could have considered replacement of the aero / nylock nut , and fitted a brass washer to take out usage shocks, those self locking nuts are made in different thickness/ lengths in m4: m5 size range however most are once used style. Nice to watch

[@PhilipMcDonough-rw8hn]

Hi Mark,nice tutorial very handy to know if you have or intend to get one of these rifles,I would say you would definitely recommend this rifle as a good gun,I quite fancy one myself to be honest,thanks for sharing with us,looking forward to seeing your next video,kind regards,Phil.

[@airgunsniper-elite7385]

Yes Phil, I love it. It feels good to shoulder and is a great hunter, or bench gun. You'll love it. Reximex now has quite a big selection of rifles to choose from, and I haven't heard much said against them. At first they had leak issues with the Ixia, but I think those problems have all been sorted out now, plus they even do a very nice compact carbon bottle version, which is their top of range.

[@RogueRiderUk]

Just picked a Regime up.... so this was pretty handy to know! Thanks!! Out of interest.... did you have to drill any anti tampers off to move the cocking handle over to the left?

[@airgunsniper-elite7385]

No, but it wasn't straight forward, as they put an anti tamper snap off screw on the barrel, which makes things easier to do if you can remove it. Once the stock is off, you can take off the rear nut that came loose on my last video, then the small 1mm grub screw where the linkage attaches to the pellet probe, remove the shroud and pull the framework off the rifle. The reason for this is that the barrel is in the way of a bolt that needs to be removed.

[@RogueRiderUk]

@@airgunsniper-elite7385 Thanks for that!

[@SNIPERSUPERTEN]

Try a nyloc nut on the piece you had a problem with,that should hold it,👍

[@airgunsniper-elite7385]

Yes, I'll have to get another one. The one on it is nyloc, but it is worn out with the number of times it's been apart.

[@robertcichon8231]

Hi Mark is it me ?? This gun seems to have lots of little problems considering its not very old !!

[@airgunsniper-elite7385]

All part of the same issue when you look at it. Once taken apart, the linkage runs with the trigger and pellet probe. When undone, the nut and grub screw are prone to unsrew under constant use through vibration, etc, so loctite is required. Apart from this, there haven't been any serious issues.