Airless sprayer low pressure

Low pressure on an airless paint sprayer. This is one of the possible causes and how to repair

[@samuelregalado506]

Awesome 🤩

[@ikeremilianoruacho4668]

Muy buen video y aparte ayuda mucho

[@rigobertorivera46]

You are Great thank you

[@Brian_the_repair_guy]

I hope it helped

[@andresnunez5047]

FELICITACIONES EXCELENTE INSTRUCCION,FAVOR COLOCA EL VIDEO CON AUDIO EN ESPANOL,SALUDOS UN VVERDADERO PLACER,MUCHAS GRACIAS

[@Brian_the_repair_guy]

I am happy to help

[@TheJoserubio12]

Bro you're the best

[@Brian_the_repair_guy]

Hope it helps

[@franklinbittner4683]

Nice thanks

[@Brian_the_repair_guy]

Hope hope it helped

[@richardseaman1670]

I have the 440 impact and left suction and prime hose submerged in latex primer , depressurized, took spray tip and guard off and cleaned . I planed on getting back to it the next morning , anyway it stayed that way for 5-6 days ... Not sure if I should swap hoses before attempting to clean it, dont have much experience with sprayers should I first just put my suction hose in warm water and prime the paint out of the pump and then switch back to spray and keep flushing and checking the filters. I was just having a bad day in the rain and wanted out of there. wish I would at least spent 5-10 minutes cleaning it before I left. don't really want use laquer thinner in it. Thanks

[@Brian_the_repair_guy]

Pull the pickup tube off and flush it clean first. Will make it easier to prime the machine. Once it is clean reattach the hose. Check the end of the prime hose to make sure it has not dried closed. Clear it if it has. Pull the pressure hose off and put the pick up in warm soapy water. Start the maching on low pressure. Hold a small container at the pressure hose connection to catch the fluid. Let it run a gallon through. Attach the pressure hose and flush the whole system.

[@juliodasilvalopeslopes9006]

👏

[@brandonwreggit7728]

Hi Brian, nice video and deduction of what the actual problem is. I started working at a Titan authorized service center a couple of months ago as a Titan tech, but we just started accepting Graco pumps for repair too, so I've been binging your Graco videos trying to learn how they differ. I just had a Graco 695 Ultra Max come through my shop with the same symptoms as this 440, and the transducer was the culprit. These machines seem pretty straightforward mechanically, but is there any advice you would give to someone who is new to this? Also, what do you do with the paint infused testing water? Let it evaporate and use kitty litter to suck up the paint that gets left on the bottom? Thanks for making these videos, very helpful.

[@Brian_the_repair_guy]

If you would like, Graco has a training facility. The classes are free of I remember. I believe you pay to get there and you room. They pay for meals and the classes. I use my gun and hose with pressure gauge. This limits the amount of paint since I am not using the customers hose. I reuse my water a few times. Once I feel I have reached the limit I pour it on a combination litter and cardboard. Once it dries it is disposed of. My advice. 2 things. 1. You never know it all. 32 years, and a learn something new pretty regular. 2. Listen to the customer when they describe the problem. Don't just wait for them to stop talking so you can jump in to the repair.

[@JerryM-sv8ry]

paint leaking outs sprayer under pressure

[@Brian_the_repair_guy]

@@JerryM-sv8ry where is it leaking from?

[@andresnunez5047]

NICE TO GREET YOU,I HAVE A TITAN RENTSPRAY 600,A QUESTION THE GUN AND THE HOSE OF THE GRACO IS COMPATIBLE,THANK YOU GREETINGS

[@Brian_the_repair_guy]

Yes. It is comoatable.

[@aveumartinez9167]

Great video!!! I have a titan8900 that is not building pressure ... bleeding its working good .... when l try to turn the pressure on the knob looks like its not doing anything .... thanks on advance

[@Brian_the_repair_guy]

When you turn the prime valve off to spray it keeps pumping? Does the hose appear to be jumping as the machine is stroking?

[@aveumartinez9167]

No when l shut the prime valve the piston stop. But not building pressure

[@Brian_the_repair_guy]

@@aveumartinez9167 remove the gun from your hose, turn the machine on and turn the prime valve off and see of the hose allows fluid to move out. If it does, let me know.

[@aveumartinez9167]

@@Brian_the_repair_guyl removed the gun and water coming out but not enough pressure .... looks like the pressure knob not doing nothing or not working

[@Brian_the_repair_guy]

@@aveumartinez9167 your pressure knob is turned fully clockwise?

[@pricapredrag2342]

Are the same parts for 440 and 560e. because I can't find the parts for 560e. Thanks.

[@Brian_the_repair_guy]

I cannot get direct access to the international Titan equipment. Looking at what little information I have access to, it appears the 560e is very similar to the 440 Impact and 540 Impact. It may use all the same mechanical parts, but the electronics may be slightly different. Exactly what parts are you needing?

[@fletcher-nf4pn]

Hi, just a quick random question, my titan 440 leaks oil, its only a year old, I've stopped filling the reservoir up because it just drips straight out, is there something I could do at home to fix it, or have you made a video on this issue I could watch

[@Brian_the_repair_guy]

The oiler is pretty simple. There is a leak in the reservoir or the valve has a leak. Simple solution would be to replace the front cover or just remove the cover and add oil directly to the piston occasionally

[@fletcher-nf4pn]

@Brian Shumack the repair guy cheers mate, I'll have a look, I've just been puttin a bit of oil in the reservoir n pushing the oiler button straight away

[@Brian_the_repair_guy]

@@fletcher-nf4pn you only need about 2 pushes about every 2 months. Do not uses it too frequently. It will over fill the cup and leak as well

[@gabypacheco9646]

How you know when is sensor demage or packing’s ‘? Thanks

[@Brian_the_repair_guy]

32 years of experience helps. Absent of that, packings will usually cause the machine to continue running with no real increase in pressure. Bad "sensor" will do one of 2 things. 1 machine will keep running and build excessive pressure. 2. Machine will run and then stop running but you have low pressure. These are not always true, but pretty common

[@EnriqueJavierRodzRodz]

Hi Brian, how many types of Transducer are there for the TITAN 440i?

[@Brian_the_repair_guy]

The Titan 440i uses transducer 704-251. It is mounted in a larger base. It is placed in the block seat and when the block is reattached to the machine, it is compressed back down

[@EnriqueJavierRodzRodz]

@@Brian_the_repair_guy Good morning. I do know that, the point is that the Transducer that my TITAN 440i has does not have a thread and when the block is removed from the machine, it stays on top. How can I send you the photos? Best regards.

[@Brian_the_repair_guy]

@@EnriqueJavierRodzRodz yes, that is what I have explained. It is compressed into the block. To remove it, pull the cover, remove the block. There is a small setscrew behind the cover in the gear housing that needs to be removed for the transducer to drop down.

[@EnriqueJavierRodzRodz]

@@Brian_the_repair_guy Well, now the question is, how to request the Transducer that is not threaded, could you please advise me? Thks

[@Brian_the_repair_guy]

@@EnriqueJavierRodzRodz I left you the part number in the first post

[@williamwinsor7376]

Whenever I see a pump being banged up like that I think that the inlet tube has rusted paint particles coming loose constantly and interfering with the inlet ball at times. That issue needs to be addressed too. Pain in the butt.

[@Brian_the_repair_guy]

Yeah, build up in the pick up can be an issue. I usually tell my customers to run lacquer thinner in the machine and allow it to sit a day or so to remove the build up.

[@williamwinsor7376]

@@Brian_the_repair_guy I’ve even taken them apart to clean with a rod and brush but that’s only because I’m retired and I have the time. Making a living at it besides extra money like I do is a lot of thought and business savvy.

[@Com4nd3r.]

his pisten runned dry to . this guy needs to take more care on his sprayer

[@Brian_the_repair_guy]

Many people need to take care of their sprayer.

[@bistatepainting]

Where are you located¿ contact info please.

[@Brian_the_repair_guy]

I do not give out personal information

[@giacomoorru3420]

E' facilissimo aggiustare queste macchine a pistoni, non capisco come i proprietari siano cosi rincoglioniti