AIRSOFT FACTORY TOUR!

[@mrwhatshisname]

my favorite "how it's made" episode

[@MarcusAurelius-20VT]

"how its fucking made"

[@1caboose1]

I smell a second channel in the making...

[@justinpook9259]

I always wondered how those shit ak gears were made

[@Snake452006]

Well, that’s the oddest music mashup I’ve heard yet, lol.

[@Soundfire6]

It's a beautiful mix lol

[@stardustbros6768]

@@Soundfire6 i was listening to that exact song and thought my spotify was playing up

[@billstrachan4531]

Hard bass by uamee

[@panzerkampfwagenvi427]

Rammstein- du hast remix

[@spicychinchin6597]

Definitely lmao

[@HeroGenix]

I'm fairly sure receiving a broken CYMA AK is one of the signs of the apocalypse

[@charliebritton21]

11/10 would recommend to a friend. Thanks for fixing up my shit show of an AK. Hopefully be able to use it after tier 86 in 2039. Cheers Luke!

[@arch_2076]

Tier 86? Too low my guy you mean tier 860

[@charliebritton21]

@@arch_2076 I'm way gone by then!

[@arch_2076]

@@charliebritton21 who knows, tier 8,600 😂

[@tigertoal5423]

I really wanna know who did the fucked up work 6 times 😂

[@jediknight129]

@@tigertoal5423 iv got a few guesses.

[@xBiotacticsx]

I really want a series of How it's made narrated by you after that chocolate/gear bit 🤣

[@bestyoueverhad100]

Lmfao..all that grease for 2, 2 gear boxes!! 🤣😂 how can you not love this guys sense of humor??

[@BIGBIRDSAIRSOFT]

Love the 70’s Rammstein mix lol 👌

[@AsaMelech]

I sat through the ads. I never do that. Respect your work and vids. Keep up the good work.

[@LumpyMillk]

The smoothest transition into a joke I've ever seen. I fucking love you!

[@LumpyMillk]

As soon as you said "Pinion Gear" I honestly laughed out loud

[@arnoldj101]

huh, I always wondered how the finest airlift products are made. Looking forward to how a plumbus is made episode next.

[@xxandirooxx1413]

Quality! That bit with the nicking his tools had me in stitches ! Keep them coming mate

[@AleksWorkshop]

if this isn't a wacky AK then idk what is a wacky AK

[@ewokgaming832]

Hello Komrade reload man!

[@sarahshively1858]

Hey I love my Specna Arms Edge, especially after I had a Lonex gearbox shell built with Guarder 16.1 gear, Lonex bearings, Lonex anti reversal, Lonex blue piston ported piston head cylinder head and non ported cylinder and cylinder head, Maxx spring guide, I recycled the Gate Aster but the trigger had to much side to side play so I used a Speed trigger, replaced the beautiful inner barrel because it was perfect, the hop unit because it cracked so I installed a Maxx hop unit, Maple Leaf rubber, and a ASG motor but other then that it was perfect... Other then the gearbox locking up a few times during 20 minute pick up games... Perfect!

[@electronoob7428]

This was one of the funniest videos I’ve seen from you. Made me laugh a lot!

[@Didymus-vz6uy]

As someone who understands how CNC machining works, that bit with the "blue and orange alien dicks coming down and pissing milk" was hilarious

[@dave87831]

As a Dave i approve of Dave working so hard in such a difficult time.

[@azamen87]

lol

[@boriskulikov]

haha i love the music, combination of two of my favourite songs. keep up the great work. I enjoy your videos they help alot. cheers.

[@setsuna200]

That ak looked like it needed a closed casket funeral. You saved it from the grave. Thank you so much.

[@richardowen9800]

i've just bought an ICS MP5.... i feel sick now after that video! might have to send it in for a tune up!

[@NegativeAirsoftTech]

They're actually pretty good

[@Rifaa_Inertia]

What a rollercoaster of a video...lovely!

[@501stspartan]

Best pod promotion I ever seen. I haven’t laughed so hard in one of these videos until now. I hope to see something like this again.

[@NegativeAirsoftTech]

Last!

[@anthony4331]

Ah you got there last

[@spaceinaspace8452]

😂

[@louhis7158]

Those Chinese workers, omg... All of them used brutal force at some point... One used a hammer :D

[@alexbogdan7932]

Negative airsoft I dare you to upgrade a cybergun m4 sxris. Everybody says that they are piese of s***t (especialy the hop up). Ty

[@seansamurai1981]

casually drops "Theres beard hairs in here" like its an everyday thing

[@airhorn9066]

Oh wow! What a fucking video. Really cheered me up that I was in stitches. No wonder manufacturers aren't rushing up to try and buy you! Brilliant Neg 👍🏻 keep doing you mate! And the sexy Rammstein just topped it for me

[@wishdeus]

I can't remember where I saw that factory assembly video from but hearing you take the piss out of it was hilarious

[@casualliyt7490]

Its a video of ICS assembly line

[@mzjango]

GJ female Dave from China... huge fan!

[@RemnantPriest]

This is possibly the greatest video I’ve ever seen

[@DonCarlione973]

Lmao, I love that funky du hast remix! 😂 👍🏼👍🏼 "Hmm I don't think Mike's going to be here the rest of the week. Urm..." 😂😂😂

[@AMillar1]

Exactly the laugh I needed this evening. Cheers

[@hawaiiairsoft8087]

Aloha Negative Airsoft! Love it, had to pause the video at the point where you said "I don't think Mike's going to be here at the end of the week".😂 🌴😎🤙

[@KingNothing995]

Notifications: New Upload from Negative Airsoft Me: *clicks instantly on the notification and prepares for several minutes of pure fucking lessons* Love your channel so much, hope I can meet ya one day..

[@WailfulAMVCarp]

That Add or paid shizz was just like that Golden House story what you once told. Great video and very glad to see that the gun is working better then ever.

[@flyingferret-Airsoft]

Best thing I've seen all year!

[@262newchannel]

Loved how you used ICS factory footage from discovery channel! Great content m8 keep up the good work

[@danmclean7375]

🤣👌 came for the airsoft, stayed for the "How its made"

[@garybranflakes]

I always wondered how they made g&g gearboxes

[@jamesdowling9759]

I haven’t laughed so much since the hitler video 😂😂😂

[@mrforbi-pv8pi]

what video is the hitler video i want to watch it

[@jamesdowling9759]

@@mrforbi-pv8pi it’s called Hitler upgrades his Airsoft gun. The thumbnail is of Hitler. You’ll piss yourself 😂😂😂

[@kuboslav3]

2021 could not be starting better than this !

[@perkyspewpews7302]

best. paid. promotion. ever. we need more of those!!!

[@Pestilaence]

LOL Luke, PLEASE make more of these How It's Made style documentaries/ paid promotions! I'd watch the fuck out of them.

[@46templar]

Im glad you didnt scare us over how a VFC gear box is made as that would have to be rated for over 18s

[@roffmakerindonesia]

I love your video, thanks for inspiring.

[@kamote101]

So straight up forward hit, very informative.

[@acoupleofstupidkidsplay5152]

play that funky music AND du hast? That's a combination I've never even thought about hearing ever. But I'm glad I did.

[@jimbojimb360]

DJ Cummerbund!

[@rust6493]

On next weeks episode a guided tour of Willy Wonka's factory and how the Oomph Loompas construct a VFC

[@philtrysstrongman]

My glass of water turned to vodka while watching 😂great video great tracks

[@sabarslax]

What sorbo pad thicknes would be ok ? or none at all ?

[@saltysailorbell3617]

vfc produced in a office building out of boxes :)

I work at that factory and I can assure you Jim is not that bad.

[@mandofarmboy]

The surrealist film in the middle of the video made my fucking week.

[@gavinlajuett8320]

Came for the teaching tips, stayed for the R&B Rammstein

[@sarahshively1858]

Serious question about Specna Arms gearboxes do the gears fit so loosely in all the Orion gearboxes that it takes enough shims to do a few gearboxes to get them right?

[@jacobc2313]

ABSOLUTELY LOVED THAT AD

[@zacktrever1878]

11:07 Rush *B* National Anthem Edit: Underrated channel

[@Lusassle187]

It’s like the airsoft version of the krink that was on forgotten weapons

[@gavevans3795]

All jail the god like airsoft tech, well the one that can bring that back to life :) Love the channel, love the vids more please :)

[@hablaty89]

You're a king, all my respect for yours. But I would like a tip if you allow me. For this 1080p, the camera is away from the camera, do not see the details or get closer to the camera or switch to 4K. I would choose 4k because the sight width would remain and the details could be much better. Yet we are only a video portal where 4K quality would throw a lot of the life of the channel. Sorry I am using Google Transler for the wrong English language.

[@utbyjohan]

You honestly should be releasing the name of the ones that did this messed up work, to stop more people from being fooled and stop them from thinking that they are doing a good job, and with any luck have a chance to improve themselves.

[@MTBeansy]

My ears have never bled so much than after hearing that Du Hast remix

[@faluiremcfaluire784]

Where did you learn to do all this?

[@olliec4674]

Do you do purely electric airsoft rifles or do you also do Gas blow back systems too?

[@zxz-hardbrass-yt-zxz2889]

11:02 is that our sound by dj blyatman I hear (you are a good man) stay cheeki breeki

[@edhartill7969]

oi... whats the slav rave music that kicks in at the 11 min mark?

[@historicbirds8253]

Gordan Ramsay of airsoft

[@camh4656]

That Dj Blyatman into XS project was smooth af hahaha

[@46templar]

Luke i have a idea have your tried a dyson motor in side a rif as them motors seem to be the dogs bollocks on them hoovers?

[@hunterturcotte7698]

Best paid promotion I've ever seen!

[@justinpook9259]

FLOURxALUMINIUM gear boxs covered in milk piss... some one give this man a fucking raise ! He doesn’t have to make these videos but he stays blessing us peasants

[@Mrmhibbert]

How do we get that app or connect it to the phone?

[@lukedealberdi3713]

Was half of the beep 'Earl'?

[@Coolios1337]

Loved that little bit - Please do more 😂😂

[@hansverhaegen8406]

That is one good looking ak!

[@Mauricio5689]

What is the original video you use ?? Dónde puedo encontrar el vídeo de fondo o original

[@RuffsTV]

Nuprol piston by any chance?

[@GeoffDerksen]

Got a good product for AOE spacing you could recommend? Something not squishy ;)

[@NegativeAirsoftTech]

I had discs made from PVC

[@GeoffDerksen]

@@NegativeAirsoftTech cool! Thanks!

[@opairsoft8100]

Nylon or metal washers from the hardware work good

[@josephmcandrew7937]

As a tech I need to show this video to people when they wounder why new guns break

[@themarklinengine5408]

I can tell Luke had fun making this video

[@lilpettyxbigdiesel9387]

Nice to see a bit of automation there pal

[@Micksoffthings]

I leave this under every video I watched, it helps the algorithm.

[@NegativeAirsoftTech]

That actually sounds like it may be true.

[@beargillium2369]

Hot wires? Must be the "cold weather package" 😆

[@tf19Twigy]

What a mashup! Du Hast funky music white boy🤙

[@cannonballbrad9522]

Hey there. I feel like I’ve learned a lot from this channel. I just wondered what, in your opinion, are the decent brands of airsoft you’d trust. I just watched you take apart the LVOA and it was fucked inside. I’ve seen waaaay too many vfc videos hahaha and a lot of Cyma upgrade vids but the only one I’ve heard you genuinely love was the hk45. If you had 400 bucks to spend right now on a performing out of the box reliable gun what would you personally be looking at? I’m not a beginner. I have a few guns, some I’ve built myself, others I’ve had worked on for me, so I don’t mean a beginner gun. I mean something you’d trust and genuinely like.

[@newtoyouphotography7624]

Hi everybody, Dear Sir, your best video to date. P.S. We only use GAS, we don't understand TRICITY, Work of the devil.

[@charliehendrix1265]

Are you still using gate warfets?

[@hal752]

Explain why my selector switch on my cyma mp5 is dodge.

[@NegativeAirsoftTech]

Hit it with a hammer

[@hal752]

@@NegativeAirsoftTech I did and now my gun just fires in auto? Please advise

[@scottholman9363]

That was tucking hilarious 😂😂 fair play 😂

[@grillbar4]

i could not concentrate at all due to the music. never heard such an amazing mix of rammstein and wild cherry

[@borborcarcar]

My god that caught me off guard. Fucking well done jesus!

[@darkshock42mlg05]

going to melt a chocolate bar and use that as lubricant because thats how its made. Also the first time I saw the inside of an agm gearbox in a video because the gun was an old gun I thought the thing was rusted out but nope that's actually just the grease that just makes the inside gearbox the completely rusted.

[@advanceddarkness3]

I love taking it just from the tip.

[@willsahraoui3758]

They said it couldnt't be done...they were wrong Du hast+ funky music = a music miracle

[@partyrobbins4690]

Looks like something you'd find in Khyber Pass.

[@MrJawsnclaws]

I was actually enjoying learning about how the gold coins were being made... could you do drumstick lollies next time hun ? X Are you taking work yet ? Regards phil

[@NegativeAirsoftTech]

Yup, pop me an email

[@MrJawsnclaws]

@@NegativeAirsoftTech awesome x thanks

[@jasonbaugh111]

Hi mate great video as usual, very entertaining. I finally got my first Airsoft gun, it's a Cyma 513, it seems ok to me maybe a little slow on full auto, but I don't really mind as it is my first. Do you have any advice on what I should do to make the gun last. Thanks for taking the time to produce this video for our entertainment, keep up the good work, take care have fun and play hard.

[@jasonbaugh111]

@@christophercole7270 cheers for the advice. Will do.

[@bruh-rg5yh]

Hey man was wondering where you were based?

[@wkkkkkk545]

Is Titan wired to Tamya ? :D

[@andrewsmith8105]

could you do a vid on AOE and the right way to do it ,, i live in australia and we play gel soft here

[@T-B_22]

great video and great music lmao :)

[@racyagentmac]

Damn this gun looks like it could be in metro 2033👌😂

[@prayaprawiraturganda7998]

I love bob and mike