Airsoft Review of The Elite Force Glock 19 by VFC - $170 Airsoft Pistol

[@likeaboz]

now i want a glock that says mcdonalds...

[@williamoshea7614]

like a boz sammmmme

[@Here4Porsche]

Absolutely. A KFC or Taco Bell one would be dope too

[@f1bryan134]

like a boz glockdonalds

[@jay_1177]

They should have glocko bell

[@nekuriesantos6283]

Fuck glocktendo glockdonalds

[@eatyourcereal7840]

Glockdonalds?!

[@jarrhead3538]

To keep up with the restaurants in the hood, each happy meal now comes with a brand new glock 18c

[@shirleywhetsell4609]

Hahahahahahahahahahaha😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂🖒🖒🖒🖒🖒🖒🖒🖒🖒🖒🖒

[@merrafarms4088]

i go to that McDonald's i pull up in the drive through blunts lit, drill music playing and i ask the cashier if they want to hit the blunt

[@juliojazz8341]

With every big Mack you get a Glock 17

[@Jusdirt]

Yes lol

[@DeeJayNee]

Your description of Glock's personality is why its been such a hit with departmental and duty use all over the world. It just does its job.

[@chinkle1430]

"this pistol chronos at who cares, and the range is whatever with .you'regoingtousewhatever gram bbs anyway. finally somebody says it. for pistols none of it matters.

[@Sabot_Shell]

Right when I saw this comment it happend in the video lol.

[@littlenorway3135]

You basically use a pistol for when the enemy players are up close, and your primary won’t do for multiple reasons. Fuck range and whatever BB’s, I just need the pistol to send the B.B. from the magazine to the guy in front of the barrel, and it’s already a decent pistol if it can do that without problems

[@fiskersproductions]

C Hinkle I play pistols only...

[@grenadeout562]

To some degree it does

[@marcosaureliopuente9391]

Yeah u don't even need to adjust hop up on pistols

[@mikhailbridges1268]

the airsoft glock mags are more expensive than real glock mags for a .45

[@RedVRCC]

Real mags don't need to contain pressurized gas.

[@TylerAbomination]

@@RedVRCC Also real mags are quite simple in function

[@benferreira4281]

@jord heinz Lol true. I bought 2 extended mags on Amazon at 39.87 and also got my g18c for 160$ as Exike was 40 dollars more and the mags are i think 60$. I went on yesterday to purchase another g18 and 2 more mags and guess what!!!??!!! Those bootie holes raised the price. So i slowly walked to the shower turned it to icy cold got in crowched down and cried. Didnt even take my clothes off.

[@zipperozicvideodump]

thats a little bit horrifying!

[@millermfbadaaa6888]

Or roughly same price. In my experience w 9mm

[@Ghost_SniperAirsoft]

You want to see a G18c.... Don't we all...

[@chocwah]

Ghost-_- Sniper Just Dont get WE Tech

[@Ghost_SniperAirsoft]

I have two why? They are great. You will see it used in my videos.

[@bottomgear4028]

I have one and I like it

[@khris7963]

The Røøkie ZgamerZ just another WE hater

[@khris7963]

You mean dont WE all? ;)

[@jacksonsmith4907]

The oil on the slide made me uncomfortable

[@hatepurrpp2651]

Jc hey dumbass it’s literally oiled by the manufacturer

[@devingreen3389]

@@hatepurrpp2651 lol ikr

[@notkray8468]

It's by the manufacturer.Its not a big deal just wipe it.

[@aydinlutmergp4885]

Cum

[@rileyf8036]

jeffel80 ummmmmmm

[@ThatOneFriendlyDude]

Just to make it more well-known by adding another comment: these Glocks are apparently able to accept WE G-series magazines, which are significantly cheaper. I wish these were available in Canada, but nobody’s importing them with extended inner barrels yet. One day, I’ll probably get one if they make it here.

[@Ironcoremagma]

Go to your local airsoft store and ask for the WE/TM/KJW glocks. Almost every airsoft store has them in stock but doesn't advertise them for obvious reasons.

[@ThatOneFriendlyDude]

buyairsoft.ca sells them for supremely cheap (an insanely low *$125 CAD* for KJW G23 w/ plastic slide, $150 CAD for KJW G32 w/ metal slide OR KJW G27 w/ metal slide, $160 CAD for KJW G17 but they only sell threaded barrels for the 23 and 32 and they have tinted composite polymer lower receivers to comply with Canadian airsoft law as they are sub-366 FPS) so I might pick one up one day. UPDATE (28/10/2018): G23 is now $130, G32 is now $165 but they’ve finally started selling G17 and G18 models with opaque bodies (CO2 version (gun with CO2 mag, can still use green gas) shoots high enough) for not much more. However, shops are starting to get their hands on them, so that’s probably worth checking out (unless they’re supremely overpriced, even by Canadian standards).

[@marqawesome429]

Replicaairguns.ca sells them

[@nathanalexander9127]

Praise worthy, for $70!The only issue was the round gasket ring seal between the CO2 and needle kzbin.infoUgkxnX9wE_Q8zvF75Y5iWzTU3Q4FlrtyGApQ . Withered away, and I'm having a tough time finding a replacement.Gun still works perfectly, but needs a new gasket. Can someone please say where to find the gasket replacement?

[@3juliano680]

i dont even do airsoft but i really wanna get one of these lmao

[@Joe-uc7qt]

I just got one and it’s GREAT

[@Bestgameplayer10]

Likewise. I just wanna have it to just have it.👀 And to shoot cans from time to time.💀

[@Joe-uc7qt]

Bestgameplayer10 it’s a little expensive for plinking if you want a Glock for targets get the WE or Tokyo Marui glocks they are less expensive

[@Bestgameplayer10]

Cereal Mafia - That would be the smart thing to do but I kinda want the officially licensed for the novelty factor. In fact, I JUST placed an order on Amazon like an hour ago. But you’re right. $180 is expensive for just plinking so I’ll think about reconsidering my purchase throughout today.

[@Joe-uc7qt]

Bestgameplayer10 your money not mine but I will admit the trades are the greatest on mine. (17 Gen. 3)

[@fns58]

I like the fact that the plate hides the valve so when I drop the mags I don't have half the field on the valve

[@frapachinosports8106]

I agree but for a different reason, as an aspiring film maker the base plate on the magazine makes it that much more realistic

[@gflaig9131]

Yeah but it is not that solid: mine broke after I dropped it on wood. Now there is a long crack on the cover.

[@lorenzorivas211]

@@gflaig9131 same with mine

[@stevenlyon4348]

I love this review. hilarious that the beginning review could fit an actual Glock 19. The Honda Civic of the gun world.

[@dangerci8835]

After comparing mine to my real G19 gen 3 I found that you can use alot of real glock parts like the slide release, mag release, the mag base plate and even the plate on the rear of the slide. I replaced the stock ones with aftermarket silver extended releases and silver reaper logos on the base plate and slide base plate.

[@Rasky823]

can you change sights?

[@xXSCAR117Xx]

I like how you go over how the licensing means jack. I just messaged PTS a few days ago asking if any of their new mags would fit my WE-Tech ACR and they told me, “We don’t test our mags in the counterfeit ACR”.😂 Only reason I bought the WE-Tech version is because it’s 1:1 scale with the real Remington ACR whereas the A&K and PTS models are not and have the charging handle in the wrong position. One of my friends had one too and said it shoots pretty well. I found midcaps that will work without me taking a dremel to the internals though so it’s all good.

[@QSAirsoft]

Here’s my take These Glocks are cool, don’t get me wrong. It’s bout time we got a legal Glock in Airsoft. I just wish it wasn’t VFC. If it were another WE or a KJW and their awesome gas gun past. I myself have a KJW KP-17, and it’s awesoooome. It’s a Glock but no trades, if it had the trades it would cost another $50. Kinda ridiculous. The replacement mags... $45... you’ve gotta be takin the piss. A WE and KJW replacement mag is less than $30. Way better price. If you’re looking at getting this gun as your first one and ur a beginner I wouldn’t recommend it. Get an elite Force 1911, or an ASG P0-9. Wait a few months for them to work out the kinks of these first batches. That’s my take.

[@thogyt]

XXQuickscope56 well said from one of my favs

[@SPEEDYNOOB]

XXQuickscope56 same, probably won't be buying one anytime soon even though they look awesome.

[@ascendedfishing]

XXQuickscope56 not to mention eliteforce piss poor customer service and lack of upgrades

[@DevinGhillieAirsoft]

XXQuickscope56 they take WE mags....and don’t ever recommend elite force 1911s lol

[@QSAirsoft]

Devin Ghillie well I just did. #Whatchagonnadoaboutit EF 1911 is way better than this crap lol

[@arches_aviation8584]

I bought the non-blowback edition. Dead accurate and amazing. Totally worth $70

[@Diles46]

GLOCK™> not ™

[@Trevorasu]

Perfect for training - fits all my ccw holsters

[@mulisha-kv7hn]

Trevorasu may I ask you what is a good holsters for airsoft gun im looking to pick one up

[@jordanredd2519]

Hey man, I'm looking into getting one of these for home training as well. I may make a little makeshift range in the backyard and just mess around with this out there. How has it been? Do you feel like this negatively affects your accuracy when you shoot you actual G19? Also, how has it held up since you posted your comment.

[@johnshea5312]

Same here. With the exception of holsters that come in front of the barrel since the orange barrel tip/extension protrudes about half an inch.

[@Fede_uyz]

@@johnshea5312 that can be taken off, you'll need a plier though as these come with adhesive, but they are meant to be taken off by the user

[@IIDASHII]

Thank you for this comment. Not ONE review I've seen talks about holsters. Practicing draw to first shot is my main reason for buying this, so it NEEDS to fit my holsters!

[@jedimaster197]

I have the E.F. G17 Gen 4 with 3 extra Glock mags. I love it, feels and shoots awsome. Feels more real than my We G18c, also it has stronger polymer and metals for the build then the WE. Will be happy to see the G18c from Elite Force when it comes out.

[@QuintenBuyckx]

Can you advise me? I really like Glocks. But everyone tells me to get the WE instead of umarex. Is it true that it's not worth the extra? If TM was still making glocks, I probably woulf have bought a TM one and put a metal slide on it

[@DankestSupply]

@@QuintenBuyckxGet a WE if you want to modify it, find the parts easily, and it be cheaper. Get the EF if you want to train shooting, and get simple non-characteristic changing upgrades. Most of the gucci customizations are terrible, this is probably late but there ya go.

[@AsianWithHat]

Grock?

[@awesomefo]

AsianWithHat Groot

[@jackwang4150]

BRICKS

[@rileycollins9510]

God ?

[@plaguebringer420]

Name checks out

[@lukehahn4784]

Crock

[@benferreira4281]

I loosened the screw just a tad right under the back site and the slide now closes perfectly every time. Love my G18c and looking to buy other glocks. As I have sever real ones in the IRL airsoft crazy world. My G18c extended Mag allowed me to shoot 3.5 to 4 full mags on one fill up as well so kudos to that thing. Thanks for you Videos as you have helped me out with seeing certain guns i have looked at and made choices based of what i saw like and or hated from your Reveiws. Thanks a bunch and keep it up!

[@LovEyDuBB]

Those magazines cost more than actual G19 magazines!

[@eliduffer2491]

Glock 19 magazines don’t have a camber for the green gas’s though so I guess it’s kinda justifiable

[@sleazykilla360]

I have the 17 gen 4 and out of my 6 pistols it is by far my best one. Yes the mags are pricy but then again youre paying for quality. Also any kwa magazine is gonna be around the same price.

[@ventroid4473]

Ah, I see you're a fan of Prime Thanatos as well.

[@SMILEY-eo4hj]

thats how they make their money back like printer companies, cheap printer expensive cartridges, cheap pistol, expensive mags

[@percyjackson2800]

I know it’s airsoft but please always practice as if it’s a firearm so that you don’t develop bad habits. Good review.

[@cannedgoose3259]

This would be a nice piece to mod and use for CQB, if you had some good changes on the inside, then some sights and a drum mag. Turn it into some sort of Artillery Luger but it's a Glock.

[@nathangeraghty5765]

Greetings from Ireland Scott, love your videos and youve intrigued me on almost every review, youre a grey youtuber keep it up.

[@nocontentbutplssub9735]

Nathan Geraghty do you play Irish music, cause I do

[@nathangeraghty5765]

Blue Devil I actually don't, love almost all of it though, we make some great traditional style music.

[@nocontentbutplssub9735]

Just wanted to ask I play Button Accordion and Tin whistle, you are so lucky to be in Ireland

[@thegooddoctor413]

that opening was priceless like the glocks people have made without the licensing

[@FirearmEnthusiast]

Those first 18 seconds is literally everything Airsoft I own except I'm the Grandmaster myself lol. Great video although the issue you ran into with the slide hanging up when slowly racking it back and forth is actually very common in most, if not all Airsoft GLOCK replicas.

[@Deutsche_Windschutzscheibe]

I bought a glock 42 from the same company for the same price, It was so good and it never broke down or stopped working, So today I decided to buy a glock 19 gen 3 (One being reviewed in video) and I am so stoked to get it in the mail!

[@nicholast.6636]

I understand that this comment will likely come after many of you have bought this, but as someone who got this product from outside of airsoft, I feel like my issues with reliability are something important to mention. For reference, I use airsoft guns for dryfire and dryfire about 100? 150? times a day (i'm not quite sure so take this number with a grain of salt). I have had this product for about 4 months and have had the hammer assembly break twice, both from what appear to be fundamental design flaws with this glock although they appear to be in other glock systems. The first time, about 2 months in, the tab that the hammer spring pushes the hammer with breaks. The hammer is made out of aluminum and this part sheared off causing the hammer to no longer work. I ordered a replacement hammer from a different company which while made out of steel, did not fit and had to be modified to fit. Now fast forward to a few weeks ago. I first noticed that similar to what was described in the video, the slide would get jammed up and stuck half way between fully open and fully closed. I thought nothing of this as the problem eventually went away with a few days of dryfire and i thought nothing of it. A few days ago i noticed that the trigger got significantly lighter than it was normally. I didnt really care about it and continued to dryfire until it started to get annoying. Apon disassembly, i noticed 3 problems. First, the hammer spring was bent out of shape. When attempting to bend it back, the spring snapped. Second, the spring that resets the hammer bearing(idk what its called but it allows the hammer to get cocked smoothly) snapped in half, likely what caused the slide getting jammed open. This could be partly my own fault as i had to bend that spring to get it to fit with the aftermarket hammer but it didn't break where i bent it which confused me. Third, the hammer housing had a physical indentation where the hammer hit it. This was a result of the hole which is used for a pin found in the glock 18 not being filled. This not only caused a dent(which would not be a problem on its own), but caused cracks to form in the hammer assembly. Another problem that has consistently happened is the breaking of the baseplates. These magazines are quite heavy and when impacting wood flooring, the baseplates tend to shatter. Now this was solved by adding foam pads to the bottom of the plastic baseplates, but it is still a problem. Overall, these problems appear like they would be consistent throughout all airsoft glocks, but something to take note of if you wish to use yours for extended periods of time. Thanks for reading my essay, for completing this task, you get 1 extra brownie point.

[@BrievKaput]

I’ve had mine for about a year now and have gone to my local airsoft field every weekend and I have never experienced any of those problems. I guess you just got a bad one

[@sherlockbatmanholmes892]

When I first shot my airsoft Glock 17 gen 4 the orange tip shot off. Literally the first shot! But I do not mind.

[@lorenzorivas211]

Sounds like a perk to me

[@n0tfbnglz]

My dad has a Glock 23 and I gotta say, that replica looks exactly the same, Great review!

[@ThatOneFriendlyDude]

Totally Not Fabian The Glock 23 is basically the Glock 19, but chambered in .40 instead of 9x19mm. Makes sense that they’re similar.

[@humboldtgorilla7077]

It’s pretty much the same gun just 40 caliber lol

[@ClubbHouseAirsoft]

What's sad is that the G18 was a failure. I've replaced the magazine release on mine after fielding it for just this year, the full auto works when it wants to, the slide wears at the slide catch. I actually had to grind out the wear and shim the slide catch to take all of the wobble out of it in order to prevent further wear. This was done on the replacement. Same issues as the one I sent back. Welp, I won't hold my breath on umarex fixing these issues on the G18.

[@fulysemiauto]

Same thing happened to my g18.

[@250rapid]

I'm glad I purchased the previous Stark Arms G19 Gen3 for much le$$, also made by Umarex with Semi/Full Auto selector under the slide and 100% exact same trade marks as the real one. Now they sell same pistol under Elite Force G19 and added the" Officially Licensed" logo to the handle replacing the Made in Austria Glock Inc. Smyrna, GA and leaving the US. Pat numbers blank. They also removed the Semi/Full Auto selector and on top of that, they raised the price. Hard to find other brands on eBay (WE- KJW, etc) because they will be removed.

[@kamppiruller98]

After only 3 weeks of use the frame cracked next to the slide catch. Also the slide was damaged using too much the slide release and it caused the slide not locking back. Great for training tho. If it had a bit more stronger frame and maybe steel slide it would be perfect. Im bow looking forward to ghk glock 17 model that was promised to be released later this year of 2020.

[@sergystraystar9135]

Just to let everyone know, if you’re using a real Glock hard case holster it either might not fit or barley fit. The airsoft glocks are a little thicker then the real ones.

[@00_real1]

Wanna give the gen 5 version of the G19 a shot, I got this gen 3 once and it lasted only 2 weeks before it started breaking down on its own. I have bigger pistols (G34 and high capa) but really want a compact pistol as the bigger pistols are heavy and dont fit in my pockets without falling.

[@thomasmcq3908]

Its cool but ... does it really do anything different than a tokyo marui

[@CocoBear45]

I want to be part of the notification squad!

[@cragnorthegoblinking4269]

I have the same model but the co2 version, I love it. Haven't had experience with other airsoft equipment yet, because I don't don't have much money for the hobby (besides the garbage cheepo stuff that depending on what you get can be mediocre to shit) but, I have run quite a few rounds through it, and it works like it should, feels nice, shoots straight, (and differing from most opinions) looks amazing. If you wanted something good to start the hobby off with (like I am), I personally, would recommend it. Ps it costs about $70, buuuuutttt, it's pretty fun to use.

[@maxtung5395]

To be honest , If you are in asia , don't even bother with this piece Personally, I lived in HK and run akimbo glocks in CQB. The first pair of glocks I used was a second hand TM Glock22 and a VFC Glock 17 gen 3 ( I assumed that it is the same gun because they said that they use old mold). Both survive the first game . However VFC one already lose its sight . I had to buy a new sight and glue it to the gun. Disaster happened in second game though. In the middle of fighting, VFC one's hammer set is broken and TM one's slide broken but still fire accurately For the VFC one , I can hardly find any spare parts for the hammer compartment . Most of them were out of stock at that time (hammer set has a bit variation from TM). But for TM slide, I found many different type of replacement .(in asia) For example ,there are normal aluminum slide for G17, or custom slide like SAI ,TTI ,Agency Arms , ZEV.Some can even install RMR sight. Finally , I got myself a sliver TTI G17 Slide to save the TM pistol. At that time , John Wick 2 is a big hit. My fellow airsofter in hk build their own TTI G34 which similar to the one in movie. As I saved up more for the hobby , I transformed that TM pistol a lot. There are lots of aftermarket parts to work with in asia. The only thing left are the guiding rod, the middle body and the hammer set . My second pair of glocks consist of a custom TM glock and a WE G18C. ( good thing about we in hk is that they had a lot of backup parts. To be short, in asia , glock are saturated in airsoft . You don't have to try a mediocre one. Go get like KJ KP13 ,KP17 , WE G17 ,G18C or even build your own If you are in place other than asia and you want your glock other than VFC/EF , I guess I could only wish good luck btw.

[@patrykpl5338]

We have a lot of KJW Glocks here in Europe. Maybe what you said only applies to the US.

[@WrongFromWright]

This seems exactly like the Glocks released by VFC years ago. If so, there are OE and Aftermarket parts available at WGC shop.

[@Evan-eh9dd]

yeah i'd say the slide hang up was a tolerance thing. Just a hair on the larger side of the tolerance for the barrel and/or smaller side of tolerance for the slide

[@gunnerk19]

What would you recommend to remove that damnable warning billboard on the bottom of the trigger guard? That stands out like a freakin’ sore thumb to me.

[@jutugaming7152]

Dude thanks your the only one who talks about more of the gun am buy this glock and a Nother clip thanks man

[@sethfairbanks8283]

just got my glock 19 6mm airsoft gun, and i gotta say, this item was totally worth the money!

[@jacobsilvestri895]

I live in Louisiana there's not really any airsoft fields I was planning to go the high ground complex in Houston but my friend isn't in to CQB .So what fields in eastern Texas can you recommend ?

[@jaythebossdee]

@usairsoft how do you feel about the VFC P320? I had one and I loved it , it’s just smooth ( for me at least ) and it’s easy to upgrade. I switched to the glock 19x and it’s giving me problems ( I fixed them but still ) I’m definitely going back to the m18 p320 black

[@teammusclecars7797]

I watched this a few hours after purchasing the product and so far I can say it has performed great for me! I just Wish the I could get the spring in the mag to stay down without holding it while loading the gun.

[@donnydangerbbmachinegunner2863]

It's been difficult to get parts for my Glock 19 gen 3 😏 I finally found a barrel set but I can't find the guide rod and return spring . I'm also needing a hammer set which is most likely going to end up being replaced by the EF G17gen4/G18C trigger hammer group..

[@theericfamily8575]

“A Glock fits well in the hand or at least my baby hands” Me:what?🤣

[@tonycummings5427]

Would you suggest the green gas over the co2 version? Also witch version will run longer per full or cartridge. Thanks

[@nopainnogain9854]

I love my Glock 17 Gen 4 airsoft. Works great and has the olight combo laser sight and flashlight.

[@Mike_Power]

Love the slide manipulations with the finger in front of the slide

[@TuBui2]

i talked to a sales/tech guy at a local airsoft store and he told me that he'd choose a WE over the Elite force because the WE is based on TM parts. How do you think the EF compares to the WE glock?

[@Kurafox_]

1:02 i thought that was my fire detector LOL

[@XLexieXBabyX]

Is the extractor supposed to wiggle like its broke? or is every one of them loose like that? I baught this Glock 19 from y'all literally like a week ago and i've put less than 50 rounds through it and the part thats supposed to be the extractor is very loose and i dont think its supposed to be, how's it falling apart when ive barely had it for just about a week and only shot at target? lol

[@friendlytravelagent7784]

Can you please review the CYMA or JG RPK? I am wondering if I should get one, and if so, where? Thank you so much.

[@slow6.7]

All I’m using this for is a side arm for my sniper , at my field snipers have to shoot 75ft+ if under 75 you have to use sidearm

[@nikolasscuro3467]

i have a question whats your guys oppion about the h&k usp .45 non blowback pistol im new and jus getting into airsofting i would really like to know

[@WTFisTingispingis]

Luckily, they take WE mags. They're much cheaper.

[@rustknuckleirongut8107]

Problem is the gas seal in the WE mag is flat and the seal on the VFC nozzel is rounded and that means you will lose a ton of gas that doesnt make it into the nozzle with each shot. The mags will "work", but not a great option.

[@chocwah]

WE Tech Glock is garbage I’ve only used it 3 times and didn’t even last for a year.

[@sleazykilla360]

And we's are also much shittier and less gas efficient. Have fun with that. Quality, over quantity.

[@chocwah]

1Jarvis Ngo yes I was maintaining it and I had a friend that always helps me clean and maintain those three We tech Airsoft Guns. Glock 18c 1911 And it was similar to a Usp.45 trust me this was a while ago.

[@not.an.operator]

No threaded barrel? Is it still possible to take the orange too off, or would it look like crap?

[@frankiev116]

My first video of yours and I really liked it. Enjoyed your style and way of talking. You got a new sub 🤙🏼

[@spyroclone152]

I just bought myself a Glock 17 Gen 4 for my birthday two days ago as my first ever GBB pistol. The store had many selections of pistols, including Hi Capa legends like the Tokyo Marui 5.1 and the JW Taran Tactical Combat master. But for some reason the good ol' Glock felt the nicest in my hand and really had that blend of ergonomics that I was looking for in a pistol. It's nothing groundbreaking or fancy, but it is a serviceable and reliable sidearm that won't let you down for the sheer consistency of it all. I cannot wait to go to an event and bring this to a field so that I can truly let it rip. The mags are too expensive tho so that is a bit of a downside.

[@johnshea5312]

I picked up one of these today as a training tool to complement the (real) Glock 23 that I carry. It seems to be solidly built and fit nicely in the hand. It fits my existing Glock holsters perfectly with the exception of the extended orange tip on the barrel which prevents it from fully seating in some concealed carry holsters. The controls feel exactly right and it required no real adjustments to train with vs. training with my actual pistol. With just one day of shooting in, I can't really comment on its durability or longevity, but I haven't encountered any issues so far. I wish it wasn't priced so high, but I'm satisfied with it so far. As a complement to/substitute for live fire range time, it makes financial sense for sure.

[@3IN1SDG]

Why did you keep releasing the slide before putting in a new mag? You can't load a new mag with the slide back?

[@Opsmaster703]

Echo1 redstar operator combat weapon carbine aeg airsoft gun, the new gun I'm lookin at, however I can't seem to find good reviews like you make em. If you could give me your opinion on this rifle that would be amazing.

[@WrongFromWright]

Wow, so VFC even used the same "GEM208" serial number on the barrel and slide that did years ago.

[@SinisterDeeds214]

Game play? Where was you at? I was at D14 all weekend.

[@williamcrane8236]

That basement floor reminds me of when I had a bean bag chair explode on me. Too bad the mags are so expensive, I'd love to train mag dumps but at that price, how durable are they?

[@maliknolan5711]

Excellent gun I just need to know what type of brand of high-quality BB's can be used

[@Wik3dMonk3y]

I gotta question, I just bought one from academy, it’s umarex Glock 19 gen 3, the slide does not move at all, I can’t find anything about it

[@sgtbulletriot]

Dude, you're in Plano, TX? I'm right near there! Do you ever play at the D14 field in Sanger?

[@SailDallasRacing]

Where is the store u mentioned in the beginning I live in frisco and where do you play

[@diyguild1327]

You think I could buy the licensed Glock and put a WE barrel on so I can have threaded attachments?

[@ronisworld2916]

Hello USAirsoft, could you recommend an aep that is also a blowback and has a straight mag design?? if such a thing do exists?? thanks!!

[@moncery_na]

I saw 44.95 and thought if the price of bananas in unturned

[@julezgonzalez4633]

I just got the same Glock yesterday and my mag has the green gas valve on the back instead of the bottom idk if that’s how it’s supposed come???

[@milkcartenlmt8939]

i just bought a airsoft glock, please enlighten me it says on the packaging Co2 not included? Does that mean the glock won't fire?

[@plaguebringer420]

It will if you get co2

[@isaiahfinnell7258]

My glock 19 airsoft gun did not come with a orange tip if you know if I need one or where to buy orange tips please tell me

[@bravoleader27]

I have heard that the Glock 17 won't fit in real steel holsters. Is that true with the Glock 19s as well?

[@WolfMan-nf4lv]

As far as the standard gbb models go... Idk if they're worth the $170 tag plus the expensive mags. But the CO2 high end versions are what I'll be waiting for. I want that 34 that they have lol

[@Wuqz]

What upgrades can I add to make this reliable and tough enough to run co2 mags?

[@scjbenify]

The gap between the slide and frame looks far more consistent than any of the real glocks i own 👍🏻

[@J.C.3]

Is there a way to safely take off orange tip?

[@spoon-6914]

How strong are green gas hand guns? We don’t play with co2 since they are to powerful, I know there’s no electric hand guns, is there any good hand guns to play with same power as a rifle

[@quitreadingth1s4]

I believe green gas is the same power as co2

[@jordanredd2519]

This is gonna be a crazy question. But, how many inches of styrofoam do you think these BB's can penetrate at about 5-15 feet away? I may make my own little range and I'm looking into styrofoams to buy but I'm not too sure how much penetration power these things have.

[@carbonoxx]

low power, will not penetrate a cardboard box

[@Jackson-nq2kh]

I love this dry sense of humor

[@sportsgin3484]

Nice video. Tel me do you know where i Can find the best tuning parts for my VFC G17 Gen5, doesn't matter how much. I didn't find anything online, maybe you can help me

[@USAirsoft]

Gin Devrient I believe that standard TM upgrades would be compatible since I’ve never heard about the VFC models being proprietary internally. Look into that a little more however. The Airsoft Teching Q&A on Facebook is much more knowledgeable on this than I’ll ever be.

[@sportsgin3484]

@@USAirsoft thx for the information

[@Ironheart8888]

I got this gun and the magazine it comes with won’t fill up with gas the mag is not leaking it’s just when I try to put gas in it only fills up for second and then it won’t fill anymore please help

[@pbfanatic13]

I own a 19 and I love it! It kicks really hard and I think that is awesome! I don’t like how expensive the mags are!!! I hope they produce custom parts for it soon!!!!!!!

[@alexis9123]

Elite force glock 19 VS WE19 what is the best ? PLEASE THANKS

[@slim1695]

Easily the elite force, much better pistol stock. We is a great platform to upgrade off of, but they are crap stock.

[@tylerenol7703]

I have a glock 17 and the magazine tab thing you have to pull back is really really hard to move

[@callmejamez]

Good reveiw :)

[@sleazykilla360]

$44 is the same as a lm4 gas mag? Um last I checked they were $55-$60 a piece. And its the same price as a kwa 1911 mag. Not really expensive.

[@CoolandNice76225]

pls do KWA MP7 review. I know is old, but am curious what all you think

[@tibovanrees5609]

You should make a review of (the best) Steyr AUG (A1), or a few high end bullpups for that matter

[@ryanwood918]

shout out to gi tactical for never having anything in stock lol

[@michaelneumann5560]

Well to be honest its not that great after all! for example after maybe half a year of using it the magazine holder broke and i had to make a new one. Also the slide release tears up the slide very bad(the aluminium is just too soft so the little notch gets rounded off... the slide does not hold anymore) and the biggest disadvatage is, that the glock does not function at all if it is a little bit cold. Other gas operated softairs work way better when its cold(for example my Mp7)