80 series Land Cruiser - Important Preventative Maintenance!

Knocking out a bunch of engine maintenance on my 272K mile 80 Series!
CSF Radiator
amzn.to/45gqSAo
Heater Bypass Hose
www.ebay.com/itm/285113350971...
Heater Control Valve
www.ebay.com/itm/224505700141...
Hose Clamp Pliers (very helpful!)
amzn.to/46fzc4Q
Harmonic Balancer holding tool thread
forum.ih8mud.com/threads/otra...
I bought a lot of these parts from a website you guys may be familiar with known as Absolute-wits-end.com
It took awhile but I DID receive everything I ordered as it became available in separate shipments
I have heard other stories of people not ever receiving shipments which is unfortunate, but not what I personally experienced thankfully.
I am in no way endorsing Wits End or sponsored by them.
Please order from them at your own digression.
Even if you don't order from Wits End their listings have a lot of valuable OEM Toyota Part #'s you can then search for on Ebay or google so go take a look!
absolute-wits-end.com
I DO highly recommend Cruiser Outfitters (cruiserteq) for any parts you can source thru them!
Outstanding customer service, fast shipping and fair prices! (Support them please!!)
cruiserteq.com
#80serieslandcruiser #landcruser #80series #toyotalandcruiser

[@jgcruisers]

Great video, I have done all these and did all while doing a head gasket, so I was able to remove the rear heater pipes from the front, and actually replaced them with a solid set. had the delete mode before I did that and went back to rear heater again to have it as stock as possible. Great trucks and easy to maintain if you do it yourself. If you have to pay a shop to do anything, it will get expensive real fast.

[@Adv4x4]

Thanks! Yes they are great trucks! Not so worried about the stock factor on this one as its previous life was an off-road driving school truck and its body shows haha.

[@socalpaul487]

I highly recommend that anyone who owns an 80 Series replace ALL these rubber hoses as soon as possible. My 80 has been laid up for several years now for various reason, but what sidelined it was one of the bypass hoses under the throttle body. I did the PHH that was well discussed on Ih8mud, but the bypass hosses weren't really talked about at that time. Due to health issues, I've just started doing this job. Everything takes a lot longer than it should due to the hoses being so hard from heat and age. Every coolant hose, transmission hose, power steering hose and vacuum hose should be replaced.

[@chipandrews2892]

Awesome video...I love taking old vehicles and working on them so they continue to be 100% operational and reliable!

[@Adv4x4]

It’s very satisfying! Especially on something as cool as an 80!

[@mikemorgan4670]

Nice one. You are very skilled and talented at automotive work. Always interesting and motivating. Thanks.

[@Adv4x4]

Thanks Mike!

[@Ghostrider-71]

Excellent video, very helpful and thank you for posting.

[@NigelNaughton]

I love having my rear heater. I just make sure I Fluid Film my undercarriage every year so I don't have to deal with corrosion. Good thing you replaced that radiator...man that thing was about to blow!! To finish the job don't forget to put some weather strip between the top of the radiator and the core support to make sure all the air is getting pulled through the radiator from the front. Nice work!!

[@Adv4x4]

Yeah mine was too far gone unfortunately! Thanks! I’ll look into getting some weather strip!

[@Henray316]

Good job bro , I didn't pretty much all this plus a new ACDelco 215-153 charcoal canister.

[@Adv4x4]

Appreciate it man! It’s nice to take care of some things so I don’t have to worry about them later.

[@lsvej1]

The 1fzfe doesn't use Cogged belts BTW. Lots of issues with noise etc just a heads up OEM belts are not cogged for anyone who's looking to replace belts.

[@Adv4x4]

Thanks yes I learned this the hard way have OEM belts now haha

[@socalpaul487]

Question - I'm planning on keeping my rear heater. Any Idea what diameter the hoses you cut at the heater? Are they just straight hoses? TIA.

[@backpackingWY]

Do you have a parts list?

[@wlpython]

I notice you used allen head screws for the oil pump cover. Do you have a part number for those, or a link?

[@Adv4x4]

They came with a kit I got from Wits End. Although I can’t recommend ordering from them after hearing other people’s feed back recently!

[@joeterrazas7939]

How much do you charge to this same on my 80?

[@dayganbagarahov8154]

Лайк и подписка 👍

[@SeanToner-he4gt]

That small section of hose underneath was leaking for me. Anyone know a part #?

[@Adv4x4]

I do not have the part # but I just cut a piece from that bulk hose I used!

[@MicahBell_1860]

I'll go rhythm

[@hongtanke]

JIS screws, not philips.

[@Adv4x4]

Yes you are correct. Most wouldn’t know the difference!

[@catseatball22]

Witt’s end is ran by one person and has had an explosion of business. Idk if everyone’s intentions was to bad mouth a small business but the reality of it is it’s one guy just trying to help 1000s ppl find parts.

[@Ghostrider-71]

Sadly, I think Witts End is done for and out of business. Very sad, I have bought parts from Joey and his website was great and easy to use. He always provided OEM part numbers which was very helpful. Hopefully someone will pick up the pieces and possibly continue on.

[@VinceJames]

Joey owes a LOT of people a LOT of money. To anyone reading this, please do not order anything costly from him. Be smarter than I am (I was warned, I ordered, and I'm out $400 dollars now)

[@hongtanke]

stay off witt's end. Dude is a huge scammer. stole 3k from me. I still don't have the parts 5 months later. Ended up just going to a local Toyota dealer.

[@Adv4x4]

I put a disclaimer in the description of this video about them. I’m glad I got all my stuff although it did take awhile. At the time when I ordered this stuff he was still communicating with people.

[@Henray316]

Same here had to file a case with my bank to get my money back. MF would never reply emails but post shit on Instagram

[@Adv4x4]

The more stories I hear the more surprised I am I actually received my stuff haha.

[@phendrix9476]

I’m sorry about your experience but I’ve been buying from him for years now. He got hacked at some point and I got a couple things 2x’s and charged 2 times. He’d let us know about the hacking and put the credit on my acct. I sent the two things back to him on my dime. I just got another big order from him the other day and a couple things are back ordered. I’m 0% worried btw.

[@noahmckay276]

If you’re in Australia and looking for stock parts, check online auto parts. They’re good quality with incredible pricing

[@kcw9313]

Sloppy content

[@elpatudo3670]

XLNT analysis & explanation for keeping your rig on the road. Probably saved $1k @tdays shop fees. When's the supercharger going on? 🍻

[@Adv4x4]

Thank you! 275k miles, I believe if anything a V8 is in its future!! 😎

[@elpatudo3670]

​@@Adv4x4do you know who, if anyone makes a LS conversion kit?