AirsoftPro CNC M24 HopUp chamber

[@adamberes5025]

2-nd generation of this chamber fits perfectly in Modify MOD24. Its a lot of better then stock chamber!

[@mynewan]

Will it fit in an A&K M24?

[@saltysteel3996]

On Evike website you can buy this rifle pre-upgraded, rated at 600fps.

[@lokkero7]

Se desajusta al ir disparando? O se queda fijo?

[@frankiecheong9173]

Where to buy this hop up assembly?

[@sergeiivanov5528]

That for the model Hop up for cm702. Web Site airsoft proo not found

[@AirsoftProCZ]

This is not for CM702..We prepare new generation of M24 hopup chambers which will fit to CM702 and SW M24.

[@mathieuvenant5745]

est il compatible avec un canon de précision 6.01

[@oikladnooi9272]

chlapi nemáte tam i video střelby v základu? spíš s pružinou M150 co je v krabici?

[@gregcool825]

I would really love to buy this hop up unit but I noticed that you didn't put the hop up adjustment nob on. Did you just forget or do you have to adjust it another way

[@travisdaoust2560]

+Greg cool Its adjusted by an allen wrench thru the mag well

[@butcher6939]

is it working woth mod24? modify standard?

[@latrodectha5874]

Is this chamber suitable for CO2 rifle SAR10?

[@petrut24]

Is this hop-up unit suitable for an A&K S24 (M24)?

[@Le_bigote]

will fit in a M28 E1?

[@jakewhitedancer]

Has a model been made thats compatible with cyma 702 (m24) name or link please?

[@oigabrys]

Can I use this hop up with the original barrel sniper ? +AirsoftProCZ

[@lowbros6029]

487mm inner barrel is way to short!! just tried to install mine and i have a loose barrel that doesn't reach the tip to hold it in place!!, can spacers fix this???

[@Sharpairsofter123]

no, 487mm is way too small, for some reason most manufacturors think that is the length. the real length is 520mm, so look for barrels with that length.

[@jamesze2363]

Is your barrel a boar barrel or is it straight?

[@jamesze2363]

tapered barrel* i mean

[@007unbekant]

Dose it fit in the m99 sw ?

[@samonella5]

when will they be in stock? it said on the website around may 31st but they arnt in stock yet.

[@AirsoftProCZ]

Hello, it will be avaiable at the end of this month. We will bring new generation which will fit to CM.702 also. ;)

[@samonella5]

AirsoftPro.cz any specific dates? I've just been waiting for about 3-4 months

[@AirsoftProCZ]

It will be available at the end of this month.

[@darrylking748]

Please can you advise which fits CM.702?

[@mastnejrocker]

Co bylo myšleno tím, že nejde použít původní hlaveň a gumička? Je gumička součástí balení?

[@trefaa]

+Vaas Montenegro že musíš použít hlaveň AEG, stejně tak gumičku

[@PostatorVitor]

Onde acho aqui no Brasil ?

[@Scipli]

Rly nice hop up, expect the spacer i got was to short and wobbly around in slot (-_-)!, I really hope airsoftpro makes steel charging handel sw24 would be so nice....

[@kr3wdog06]

The bolt handle is VSR10 type. I have a modify MOD24 and the bolt handle from my vsr10 type fits.

[@Scipli]

I got a "MAG Steel bolt handel VSR Serie" installed on my SW24, u do need a bit modification. TY for the tips :D Steeelll.....feel so nice :P

[@MrCatalyste]

compatible avec Blaser R93 ??

[@szelmen]

Can i install inner barrel with R Hop modification in this chamber?

[@szelmen]

I've just installed inner barrel with R-Hop into this chamber and modified hop bucking. My rifle shoots 0.4 bbs like crazy. For everyone hesitating - this chamber is R - Hop compatible you just need to make a custom hop bucking that's it. The best hop chamber for M24 on the market.

[@jirihorak4966]

Kdy bude na skladě? Už čekám 3 měsíce.

[@AirsoftProCZ]

Ke konci měsíce. Nejste sám, ale děláme co můžeme.

[@robinbuysse1197]

Will it fit in an Cyma CM702 ?

[@robinbuysse1197]

+AirsoftProCZ not? u mean no?

[@Gelfer1]

+Robin Buysse It does fit with some minor modifications to the outer barrel. Just fitted mine and it seem to work. Will check how good the range is tomorrow when its light out!

[@spidergeo17]

+Gelfer1 It works good? Also, what modifications?

[@Flo-y8p]

will it fit in an Modify Mod 24

[@SolaceReignFalls]

Titz Florian yes thats what its made for

[@SharkWhite333]

Galactica's Reign as the ssg24 is also just a mod24 it should fit in there too right? What you think?

[@SUGOIMEDIA]

hi guys, the chamber for cyma cm702 is ready?

[@AirsoftProCZ]

Hello, not this one. Hopup chamber for CM702 will be available within 20 days. :)

[@lokkero7]

Goma AEG o VSR?

[@lokkero7]

AEG

[@theonlyvinz]

hi nice stuf... does it fit my modify mod 24?

[@Sharpairsofter123]

GUYS 487mm is way too small i have no idea why but all retailers seem to think 487mm is the length, the real length is 520mm, anything less and your BBs will explode in the outer barrel.

[@jamesze2363]

You are wrong, snow wolf makes 2 types of the M24. One with a 520-540 inner barrel and the other with a 485-495 barrel. So this one fits the shorter barrel.

[@frankiecheong9173]

I need to buy one so where can I place order for it?​@jamesze2363

[@ElMarkel99]

is it compatible with the cyma cm.702 (m24)???

[@ElMarkel99]

ok i've just read the answer behind, sorry

[@bushcrafting-qc-5638]

so is it working with thw cm702 ?

[@AirsoftProCZ]

Nope..but we prepare new generation which will working on CM702! :) Available at the end of next month.

[@bushcrafting-qc-5638]

Well that's awesome , it's a great rifle but so hard to find compatible shit! TY airsoftpro

[@AirsoftProCZ]

You´re right...that why we´re here ;) !

[@mathieuvenant5745]

que me t il sur le joins a 2 minute 26 ?

[@bushcrafting-qc-5638]

silicone oil

[@dedahack]

which improvement reinforced m24 trigger could point me AS SHOWN my gun is the same as the video You could show me some ? // sorry translate.google.com.br/?hl=pt-BR

[@huscarlmc764]

Zejo :D