AirsoftPro M24 CNC HopUp chamber Gen.3

[@davidschmidt6013]

A better closeup of the barrel seating would have been nice, but regardless, I'm grateful that it's out there, since it shows a fairly good disassembly of the barrel and hop-up, although getting that retaining C-clip off looked like amateur hour...lol. Tip, bro? Next time use a small 'jeweler's' flat-bladed screwdriver. But my main concern is that now the action of the slider would seem to be reversed. Stock, it's " forward for MORE hopup, back for less" This would seem to work differently since the adjustment arm is hinged at the opposite end, but they failed to mention it.

[@pr248]

My unit comes with a small o ring. What is this for and where does it fit?

[@Azukaae]

Please renew the design so it could take vsr/gbb barrel since it's pretty much has better performance, also maybe you can make it one set with dedicated TDC unit since i'm sure the dimension would be slightly different compared to the one designed for the current gen 3 chamber

[@alexbogdan7932]

How to fix the reseting plastic lever problem?

[@louvartanian5840]

what are the other spare bits for

[@OliverFlinn]

Snow wolf M24.. to je AEG nebo VSR hlaveň?

[@emperorpalpatine6637]

How far you put the innerbarrel in the chamber?

[@angryfurby]

Do you sell a Metal slider arm to go with this product? The soft plastic one loses all grip on the adjuster arm and the screw strips after just a few adjustments in the field

[@bebe41738]

Hello, can this work for the SSG24?

[@bjarkehansen4911]

Hmm looks like it would fit the ssg24 aswell

[@SharkWhite333]

Is the chamber compatible with the mod24 ?

[@thunderbwoy1474]

can i use the mapple leaf nub and rubber with this hop up chamber??

[@alexbogdan7932]

Yes you can. I dit it today but you will probably need tdc

[@smusik1234]

Kdy bude zase dostupný

[@miquelvidalverdu2517]

¿Es compatible con A&K m24?

[@Ak_Tom104]

Has encontrado alguna cámara para el m24 de a&k????

[@hugomendes655]

I have the same rifle and i want to upgrad it. Can i use the original hopup Rubber if not which one should i pick. Thx in advance.

[@AirsoftProCZ]

Hi Hugo, yes, you can use the stock one. Or you can choose any other AEG rubber (with included adapter).

[@HelloMyNameIsPavlik]

Have you hop to a&k m24?

[@ozzie7947]

I have one but how do you set it up with TDC?

[@AirsoftProCZ]

Hi, we're finishing the TDC device for this chamber. Stay tuned :)

[@ozzie7947]

AirsoftPro.cz thanks

[@manuelwww]

El plástico original es muy malo. ¿Por qué no incluyen uno nuevo?

[@AirsoftProCZ]

That's true, the original plastic rod isn't the best. Due to maximal compatibility and the final price of the chamber we decided to use it anyway. But we are working on TDC device compatible with this chamber (ETA 14days), that will solve this original hop-up regulation.

[@manuelwww]

@@AirsoftProCZ TDC, great news.

[@maxemaxim3429]

Up to what BB weight can it lift? Can it lift 0.50g BBs?

[@vexenalby819]

43-49

[@kirillprotasov3043]

Dobrý den! Mám dotaz, jsou kompatibilní díly tĕlo nebo vnĕjši hlaveň z VSR 10 s m24 od Cymy?

[@smusik1234]

Ne

[@kubad11cz98]

Dobrý den právě jsem si do zbraně nainstaloval tento HopUp, ale propadávají mi hlavní kuličky. Jak se to dá řešit?

[@kubino.ets2918]

I když si přitáhl hop na plno?

[@kubad11cz98]

@@kubino.ets2918 už jsem to vyřešil

[@Jonafun01]

Compatible m24 A&K ?!

[@AirsoftProCZ]

It's compatible with Snow Wolf M24 (SW-04) and CYMA M24 (CM.702) only.

[@lokkero7]

Para comprar esta cámara y hacerle el TDC, se lo hago a la cámara de serie que el resultado va a ser el mismo.

[@drazdziu15]

It is GEN.3?

[@Thebrainofwar17]

Are you blind?

[@drazdziu15]

@@Thebrainofwar17 When I typed this comment (year ago) there was no information in title or description.

[@Thebrainofwar17]

@@drazdziu15 oh ok excuse me

[@napeetstory6096]

M24 SNOW WOLF

[@audriuskunsmonas2998]

This is bad hop up chamber becouse after couple shoots lever just gets lose and not hop up bbs anymore. So after a couple shoots you need to adjust hop up again its like original hop up chanber on cyma 702.

[@AirsoftProCZ]

Hello, this is a great chamber - increase the muzzle velocity 5-10m/s without any additional modifications. The issue you describe is caused by the original plastic rod (the same trouble with original chamber). We are preparing TDC device compatible with this chamber (ETA 14 days), which completely eliminates this issue. But we have solution for you even without TDC, please contact us on [e-mail]

[@NetKatalyzt]

@@AirsoftProCZ please explain how to fix this issue here, as you don't respond to emails. Thanks

[@82ndsteeltalons24]

This is a very poor design slide hopup, the gen 2 is far superior to this gen 3 as you have more control over how much goes on and off with a grub screw, the slide ends up moving itself after a while and then it becomes useless as you end up with not being able to out any hopup on at all, worst design ever. Tdc is superior and always will he. Why did you guys go back to this poor quality chamber is beyond me, i hope you see your error and go back to using the grub screw tdc system

[@ctitecnologiainformatica]

Fits on M24 A&K????

[@AirsoftProCZ]

Hi, the chamber is designed for Snow Wolf M24 (SW-04) and CYMA M24 (CM.702). Unfortunately we haven't A&K M24 in our store to test the compatibility.

[@AirgunsMotoAventuraJader]

Topzeira