AirsoftPro M249 CNC HopUp chamber Gen.2

[@enmerkat]

Installed one recently on A&K m249. Using a ML Super Macaron rubber. The lips are protruding to feed window of the unit heavily. The rubber also has a lot of space and lips of rubber when installed are not holding the bbs, had to apply tape. The regulation is also not smooth, on some numbers the nub is pushed with one side lower then the other. When installed to A&K there will be a gap between the feedeng ramp and HU window for bbs. After a lot of manual work got it working properly, results are now great with ML Super + airsoftpro Omega nub. If you do not have teching skills than dont buy the gen2. Go buy Bullgear or Combat union.

[@Budd16944]

Did you try any other bucking? I know maple leaf bucking lips tend to run a bit long.

[@dominikdeluga5268]

I totally agree, this piece of shit unit requires after work to make it work, otherwise the jumps between adjustment dials are so big that at nr 6 the bbs fly 30m, and at nr 7 they go straight up. This is not a good product. I recommend buying something else!

[@davorm1430]

one improtant question. Did you fix the issue where bucking lips protrude into feeding hole? It caused major feeding issues before. Please, if you answer me positive, im buying it right away

[@enmerkat]

Not fixed. Had to use 50 hardness ML bucking and 20.5mm nozzle to make it feed.

[@davorm1430]

@@enmerkat aha. Is compression good? does nozzle close with bucking. Tnx for answer

[@enmerkat]

@@davorm1430 Compression is ok, at least for now when tape is still holding. I would go up to 20.7mm nozzle if I had one around, should still feed.

[@jtqunn1957]

are you using the m249 proprietary buckings?

[@davorm1430]

@@jtqunn1957 yeah i dont and i cannot find em anywhere. I think that would help

[@matthewstent4301]

Does it fit in the S&T or Cybergun M249?

[@czecharmy315]

Dobrý den chci se zeptat dneska mně přišla M249 HopUp ale nemám tu černou zarážku na časů 2:41☹️ jak se hodi do té dírky a pak se na to da ta bílá zarážka když tam hodím ti bílou zarážku prostě to propadne ☹️ potřebuji poradit

[@minolovka2925]

Thanks :)

[@adrianlutka2456]

Did you use the o ring that came with the package?

[@005JFL]

Bro the upgrade parts for the L96 also work on the amoeba striker s1?

[@dominikdeluga5268]

This unit requires after work to make it work, otherwise the jumps between adjustment dials are so big that at nr 6 the bbs fly at for example 30m, and at nr 7 they go straight up. This is NOT a good product. I recommend buying something else! Basically the stock hop up chamber is better in m249.

[@TiktokLive45]

Nice video

[@chilwill4907]

will this fit in a Ares Stoner Lmg?

[@rodrigoscorzello4257]

Hello, do you ship to Brazil?

[@scotthayes2324]

Does this work from the cybergun m249 featherweight?

[@00l_callsign.altyn_l00]

Shrubbman Magee hey man what hop up does the Cybergun M249 use the lip that holds tho hop up units is in bad shape and I want a little upgrade know any parts

[@franknorris303]

@Shrubbman Magee did you find out what hopup it uses, I really need to get mine replaced

[@SOLHOUSE80]

buono dai su quattro pezzi da montare te ne sei dimenticato solo uno... :) :) :)

[@Doc_Vega]

This is by far the worst Hop up Design you can buy. Using screws instead of a c clip, feeding issues etc. Go Bullgear and have fun

[@kianakers9047]

Hi what bullhead hop up should I get

[@Doc_Vega]

@@kianakers9047 there is a hop up unit for M249 Modells from the manufacturer „bullgear“ just look for compatibility for your m249 manufacturer. Some A&K M249 need a little bit of milling inside the outer barrel. But not all of them. The specs are not thigh enough.

[@SOLHOUSE80]

A me non e arrivato giusto! kzbin.info/www/bejne/d6DalWprma6CotU