My t960 drone build explained

[@SkyHorseTech]

This is the next build for us, thank you for the walkthrough. We're going with a RaPi/Px4/RTK setup. Thankful for pioneers like you that are leading the way.

[@DemaMoto]

Welcome back. I was waiting for some more interesting videos. Thanks

[@MONEYPITRC]

glad to be back theres been alot going on the last year, thanks for the support

[@DemaMoto]

@@MONEYPITRC I have a question maybe you can help me with. I just purchased the DJI N3 and was wondering if i am able to have some sort of telemetry, Battery voltage, Amps, on my Frsky QX7. Maybe a video on it? Thank you

[@DavidTelesPortugal]

Awesome machine, need to get that channel expansion too

[@warmachined3472]

What PDB are you using and is it something I can use with 6s?

[@michaeltoto9954]

Hi love the channel. By the way i want to ask you . i have a 4drc m1 mark300 drone with gps wifi and has a camera that is just goes down and up by pressing a wheel on the controller. I want replace it and add 2 or 3 axis gimbal on camera . same kind like the dji mavic has. The small on . is it possible to buy that part and add it to my drone. See my camera is detachable. Ill try to send a pic. I really want to get your professional advice. Really hope this will work . look forward to your response. Thank you. Mike

[@greysondavis8873]

I literally have followed this video with a hope and a dream for a long time. I have an x6 that I'm halfway done with and almost everything else in your video to have this setup. Problem is I don't have an N3 I have an A2. Is there anyway I can make that work? I had a guy that builds stuff helping me put it all together and install the A2 and then we got stuck at how to mount and make the x5 (which I have) mount and work right. If you have any advice or could send me an email where I could ask some questions it would mean the world to me. You are the only person through the years I've now spent of research that has gotten this setup and made it work. Please help!!!!

[@spyder000069]

XT60 battery connectors seem a little risky. Have you checked in flight current draw? I would think hover throttle is going to be at least 10 amp per motor (6S) or more plus if you are feeding the gimbals and such. XT90 would be a safer choice plus the bullets on the xt90's will work better with the larger gauge wire on those batteries.

[@MONEYPITRC]

hello spyder000069 sorry for the reply delay, i did a test today i will upload the video once im done with it, looks like with the 6cell battery i had 34 to 35 amp in a hover. I have tested it about a year ago unfortunately I forgot what it was exactly. Thanks for the question.

[@1LN]

Hey, Cool videos you have, I know I'm late to the party but can you tell why you did the FLIR with the HDMI and not just use the AV port? I'm kinda doing the same setup is why I ask.Thanks for your time and HELP

[@rotcs98]

hi, what values did you set in the dji assistant for basic gain and attitude? please

[@MONEYPITRC]

sorry about the delay hector, I just saw your comment, for pitch and roll gains they are set @ 150, the yaw gain is set @ 120, and for vertical gain thats set @ 110. The attitude is set @ 100. thanks for the question and sorry again for the delay.

[@sir_maherk5220]

hi it's very cool build and nice flying thank you ,can you share the total weight of the hexacopter and naza gains value please.. thanks

[@rotcs98]

did you find the gains? please

[@MONEYPITRC]

hi sir_Maher k sorry about the delay, the weight with the 16,000mha 8cell battery was right at 17lbs. The gains are roll and pitch 150, yaw 120, vertical 110, and attitude 100. thanks for the question and sorry again for the delay

[@sir_maherk5220]

@@MONEYPITRC Many thanks

[@MegaSamuelCarlos]

GOODNIGHT FRIEND! I AM BRAZILIAN AND I AM ASSEMBLING A DRONE LIKE YOUR 960MM DRONE, I WANT TO KNOW WHAT CONFIGURATION AND HOW LONG THE FLIGHT DURATION YOU HAVE FROM YOUR 960MM DRONE?

[@dragnet53]

So what kind of power distribution board did you use?

[@MONEYPITRC]

Hi sir sorry for the delay, I don't use a distribution board its wired straight to the esc's and the flight controller, anything I need to power that's a lower voltage then the battery's voltage I just use a voltage step down.

[@followMii-Ng]

Nice video and build. I'm a rookie here but of your not opposed to giving a little direction and insight from you experience could I PM you?

[@TwoYaks]

Great build. Looks like you put a lot of blood sweat and tears into thinking it through. Jealous!

[@photojunkysdronezonevlog]

Very nice setup although it seems a little bit too complicated at least for me. I also own the 960 but went a different route. I just have one gimbal that mounts a GH4 or similar weight camera. If it ever stops raining here in the San Francisco Bay area, I will finally get to fly it so I can do some fine-tuning. I had the same motors for a while but kept on experiencing completely unexplained crashes. I had no idea what was causing them So eventually I sold off all my equipment and replaced everything. I remember the motors being a bargain for the quality. 30 minute flight time? I will assume that is without the cameras and Gimbels. Mine would get that unloaded. Oddly, I just got the 810 version and only got about 10 minutes of flight time. I will have to fly it when it is not so windy. That may have been the issue. Cool video, I will check back for the next one. Thanks for posting.

[@MONEYPITRC]

thanks for the comment, its about 30 minutes full up weight flight time thats with everything seen in the video mounted, ill post a video later when the weather gets better.

[@photojunkysdronezonevlog]

@@MONEYPITRC wow, that's really good.