Rusted Centrifugal Water Pump Restoration.

[@raywood8187]

Way nicer than the manufacturer ever intended it to be. I'm thinking a backyard fountain might be fun! That little engine probably wonders why it can't be all pretty too.

[@AJRestoration]

WAAAAY nicer haha

[@robertmailhos8159]

Yes you should restore that engine the blue is on spot for this being a water transfer pump great job job there young man👍

[@DWALLPAINT]

Very professional work, Thanks my friend ❤️❤❤️👌👌

[@AJRestoration]

Thank you too!

[@ВадимКузнецов-з2й]

... отличная получилась реставрация, выглядит как будто новая помпа, но прокладку лучше бы вырезать не из картона, а из резиновой камеры от автомобиля, нравится смотреть как старая не нужная вещь превращается в новую как из магазина, особенно нравится пескоструйный период реставрации, здоровья тебе и удачи во всём, новых творческих успехов 👍👍👍😜🤭😁😉👌👏🤔🇷🇺👈!!!

[@CharlesManch]

Little bath there at the end test. And YES! Get some Honda parts and make that thing new again!

[@scottcates]

Nice work. I like removing casting flash. Good colors and finishes.

[@AJRestoration]

Right on buddy!

[@slimwantedman6694]

Good morning from Southeast South Dakota

[@brewster3987]

What a neat restoration! Not just cosmetic, but fully functional. By all means restore that engine, love your engine work!

[@AJRestoration]

Thank you very much!

[@gregorytalber2068]

Great job you did with that beautifully painted water pump. Well done.Always keep up your great work and stay safe and well my friend.

[@AJRestoration]

Thank you very much!

[@sporkmeplenty]

Zinc electroplating really makes your videos special!

[@AJRestoration]

Thank you very much! I electroplate every bolt and nut now haha

[@MarkMeadows90]

Yes, you should restore the engine next. Honda engines are very reliable. I like the color you chose for the water pump. Looks like it works just fine.

[@AJRestoration]

That's the plan!

[@pfcparis]

Impressive little pump.

[@tolmasshahrulloyev]

Juda sifatli ish!!👍👍

[@JimFinlayson]

Great use of the restored oil can …..

[@randomprojectstube]

Really great job , it looks brilliant. Didn't expect it to pump that quickly. Yes, do the engine at some point 👌

[@AJRestoration]

Neither did I, its got good pressure! I have 2 engines lined up now. The latest one is a old 2hp Briggs and Stratton.

[@randomprojectstube]

@@AJRestoration great , I'm looking forward 👌

[@vinceianni4026]

Beautiful restoration good job well done

[@AJRestoration]

Thank you very much buddy!

[@byOldHand]

Looks great. A very detailed and meticulous work. Thank you for sharing with us ✌🏻⚙️⚒️🌟

[@AJRestoration]

My pleasure 😊

[@olgaabella2537]

Que útil para el combustible, para cargar el tanque de los tractores 👏👏👏👏👍👍👍👍abrazo desde Uruguay

[@johnconnor555]

Amazing work ,like always AJ !!! May the force be with you,master AJ !!!👍👍👍💪💪💪👋👋👋

[@AJRestoration]

Thank you very much!

[@christophermarshall5765]

Excellent. That is one awesome pump!!

[@AJRestoration]

I think so too!

[@mskayla7747]

Nice color choice. ☺️

[@lolcec81]

Комментарий в поддержку канала и ролика, а также труда мастера.

[@BGRestore]

Really great restoration; love the blue powder coat! You could probably put pedals on it and use it to propel a boat lol

[@AJRestoration]

That would be cool

[@re-fix9678]

nice job😘😘

[@AJRestoration]

Thanks 🤗

[@omarrama92]

If the pump did 25L per 17sec. ideally the L/s should come just under 1.5L/s. (actual math comes out 1.47 L/s). Great video as usual, totally deserves a sub and a like.

[@Austeration]

looks great 👍 cool colour choice.

[@AJRestoration]

I think so too!

[@idkidk8278]

Nice work!

[@unpluglvfree9507]

Cool! Just a little surface rust, the inside was like new looks like it may have spent a few nights out in the rain

[@danielkelly32]

Perfect colors

[@be007]

nice waterflow !

[@AJRestoration]

Glad you like it!

[@tomswindler64]

Interesting choice of restoration,just keep doing what your doing 👍👍👍😎😎😎

[@ShamankingZuty]

Damn, that pump really sucks. In a good way. Nice work!

[@tombarlow6176]

Hi A J nog n mooi water pomp gered van die skrootwerf

[@lpconserv6074]

For a fairly simple bit of the math involved, do a quick search on the affinity laws. That will give you an idea what you can do with this pump. Speed / horsepower / and the diameter of the impeller / pressure (also called head) are all fairly simply related. However, you need to have at least ONE point of operation info to do a comparison, as these only give ratios you can expect from changing one of the other items. Impeller size in your case is fixed.... So if you have pulleys, you can change the RPM's and it will predict the amount of more or less horsepower you will need. Nice example of a good workable pump. And with a pulley drive, almost infinitely variable for what you might need.

[@AJRestoration]

I loved this project, anything that has a engine hooked up to it is my favorite! Especially if it is with pulleys, the possibilities are endless.

[@franciscodossantos9767]

Um ótimo serviço parabéns.

[@محمدالبغدادي-ح9ط]

أحسنت يا مبدع استمر

[@0livil0]

Помпа явно новая, ей от силы пару раз пользовались, она просто стояла и ржавела десяток лет. Выглядит красиво, но после такой реставрации пользоваться ей нельзя, торцевое нельзя мазать маслом, на рем резина не маслостойкая, на следующий день, придёт хана, фонтан будет как на день ВДВ, да и ковыряние отвёрткой и забивание головкой тоже не любит

[@warlenmaldonado9978]

ficou muito boa a restauração!

[@jomercer21113]

Yes! Restore the engine to match the pump.

[@AJRestoration]

Will do :-)

[@ShainAndrews]

I'd be surprised if that pump had an hour of run time. Looks more like it was purchased and left somewhere exposed to moisture, but otherwise 100% functional.

[@adcdo]

Rusted Centrifugal Water Pump Restoration

[@persioboni9373]

Parabéns 👏

[@lebecky_restoration]

💪💪💪👍👍👍👍

[@NickandMildred]

As always nice job . What blast media do you use ?

[@AJRestoration]

I use 60 grit silica sand made for sandblasting.

[@praveenemirates561]

Primer coat missing

[@AJRestoration]

None needed hehe its powdercoating.

[@derekwagner157]

Might have made a difference on the Titanic.

[@levinjayan3480]

Bro why don't you use primer? I know paint does the work but a primer would help protect the metal

[@AJRestoration]

Powder coating does not use primer. The impeller did not get primer because the paint would not last really long in the water anyways.

[@levinjayan3480]

@@AJRestoration OK bro. Thanks

[@petepeterson4540]

didn't want to file that spew huh!

[@AJRestoration]

Hahaha it would take some time!

[@petepeterson4540]

@@AJRestoration you are not lying there you should put some thing like that up again and a flashing sign Two Days Later then you come back on collapse over work piece.

[@jamesfield5346]

That was engenius... how you loosened the flywheel. If that's what that's called, lol

[@AJRestoration]

Its called the impeller haha but close enough. :-)

[@jamesfield5346]

@AJRestoration thanks. I knew that but couldn't think of it... lmao

[@tedschmaltz4346]

Everything is better with powder coating..

[@AJRestoration]

So true haha

[@ajaysinhrathod6669]

नमस्ते सर मुझे ये वाला पंप खरीदना हे तो आप मुझे बेचो ge सर

[@victorunbea8451]

Repeat after me: We do not paint over the rotor with paint that is not food grade. At best we season it with cooking oil.

[@AJRestoration]

Hahaha I really love some of the comments on my videos.

[@DeanG55]

In almost every restoration project I watch, the original casting marks are always filed away during during restoration, (just like what you are doing here!!) Why is that? Seems if that is the way the product came from the manufacturer, shouldn't they be left after restoration? Some people like me are more into originality than attempting to make the final restoration look better than the original!! LOL!!

[@AJRestoration]

Lol

[@saidamirsaidov1315]

Лотерею поиграй и отправь выгравшему.??

[@ajaysinhrathod6669]

प्लीज मुझे बताओ

[@shah-vn2ye]

হ হঠঝঞণঠডঠডডনপপপপপপপপপপ।।।।।।।।হসসস