Industrial Gambling

[@GamerBadger82]

That compressor is the most modern thing in your workshop…to run the oldest power method used by any of your machines? 😂❤

[@ironhead2008]

There's poetry there.

[@mattknowsnothing]

Was thinking the same 😂

[@windigowhispers]

That steam hammer's gonna run for the next 10000 years. Only in death will it's duty end.

[@Indiana_James]

Hysterically true 😂

[@ironhead2008]

@@windigowhispers Its Machine Spirit is strong!!!

[@JDPyrotechnics]

Jamie scaring him when pushing the button killed me.

[@thecatofnineswords]

and the bandsaw getting on the scaring action too

[@mats6565]

It seems it almost killed Alec too by the sound of him

[@kaybouie1972]

🤣🤣🤣🤣🤣🤣I❤love it soooo much😭😭💀💀

[@danoham10]

One of the rare occasions where Alec genuinely swore haha

[@brandongraham3509]

BANG!! ####!!

[@richardruiz3654]

Machinery "repair/clean up/ making it work" video's are awesome. Thanks for the work :)

[@randomphantom3976]

I love when content creators include their fans in the process of what they do, sometimes I enjoy it just as much as seeing the actual resulting video! This is so much cooler than just "hey, got some new tools to work the titanium, let's start" or something offhanded like that. Maybe that's what I love so much about these videos. I love to know how things work, the systems, the logic, the process, the step-by-step, and that's a lot of what these videos are. Not every project has to be done in a single video. A lot of big KZbinrs have that mindset these days. The process is often fascinating even on its own.

[@HeyZeus9285]

Pro tip for your power shear. Make a ramp that attaches to the back for your off cuts to slide out and away from the shear. Otherwise it’s no fun collecting your cut pieces.

[@0num4]

This! A ramp that gets funneled into a collection bin is supremely helpful, especially when the machine backs up to a wall and you can't just walk behind it easily. Fortunately, you can make those parts all out of sheet steel.

[@davel9130]

Yes, this. We used wheelie bins because of the (*cough*) shear number of parts we were making. But for the one-offs this is essential. You might also start a tally of the number of days your tape measure survives. In our shop, having a shiny, new tape measure opened you up to relentless ridicule. We kept a reserve on hand.

[@titaniadioxide6133]

Need a tool, make a tool!

[@SomeDudeItWas]

I originally subbed to the channel because you make some really cool things, but the videos of you troubleshooting, disassembling, and restoring old equipment are honestly some of my favorite videos of yours. So satisfying to see a piece of equipment from 60+ years ago come back to life.

[@SkinnySevor]

I adore these videos of you figuring out new equipment. Including jumpscares and breaking random buttons.

[@FunExcite]

I love that you keep the steamhammer.

[@brettfontaine4681]

I dont think there was any chance of him getting rid of it. He said he was thinking about it, but knowing him there was no way.

[@janpapai9205]

I would still love to see it at the train place. Running on actual steam. This is cool but not what it was born to do.

[@LeoEmberger]

That would require a lot of work. You cant have these on steam not using em on a daily basis. I actually learned a lot about steamhammers during my apprenticeship because they are similar to a lot of airhammers that are driven by an external compressor. But tbh I am surprised he didnt get a modern industrial steamgenerator like Jay Leno did ​@@janpapai9205

[@brunsy1990]

@@janpapai9205 steam is just very hot pneumatics, and I don't doubt that somewhere down the line Alex winds up with more steam equipment and an even larger shop where a boiler makes more sense. He's already run into the universal law of shop space. The shop you have is always just a little too small for what you'd love to do.

[@adamwilson2345]

please. please. please. it was made to run on steam..... build a steam engine. please. please..

[@thecashier930]

I'll never get tired of the comedy of a blacksmith surprised by glowing things being hot. Poetic really.

[@ralphdunn1373]

There is an early Alex video of him grabbing a white hot piece of steel from his power hammer with his bare hands, next shot large amount of bandages around burnt pinkies. Safety first?

[@Michael-cu8xk]

​@@ralphdunn1373one way to learn 😅

[@ralphdunn1373]

@@Michael-cu8xk having watched most of his videos over the years, I am not sure he really has. Funny though.

[@mark.j.wilson]

Used that model of bandsaw for years. The yellow unit above the welder should have a small grinding wheel to clean up the weld.

[@UncleKennysPlace]

Yeah, I got to demonstrate blade welders for the saws that we sold (used machinery dealer). It was kinda fun, once you got the process sorted.

[@jkforges]

I’ve also got a startrite with said blade welder but I can’t seem to get the consistency down! Every time I go to make a blade I end up having to cut and weld it about 4-5 times!

[@safetymangames925]

Probably a bit late here but Tip from a Safety Engineer. those baghouse dust collectors are VERY good at removing dust but they are also prone to catch fire. i would recommend adding some fire protection like a fire extinguisher from Elide. these are very good for these type of applications.

[@EShirako]

I wish to second this with you working on Titanium Damascus metal. Also Aluminum and of course Magnesium...more sneakily, "Any oil-touched wood", but especially Linseed/Polyurethane/stain-touched wood can build up in the bags as if it's all tossed in a garbage can, except when the extractor is turned on they get oxygen-blasted. I hope they are mindful of the possible concerns there. I suspect that anyone who can actually MAKE titanium into Damascus metal will actually be reasonably-aware of the risks of auto-ignition...but just in case, I second your warning!

[@Marlosian]

That explains why the bags looked pretty new

[@MikeOrkid]

Would it be worth grounding the machine/bags to reduce static kind of like a woodshop dust collector?

[@Demdere]

Definitely love the shop videos. Please show updates for all of these tools & their installations! Even putting the extractor in its final spot outside!

[@Jademalo]

I don't know why but I cannot get enough of workshop setup videos. Restoring machines, testing machines, cleaning, fixing, it's absolutely delightful. Utterly loved the steam hammer series so I'm glad it still continues in spirit!

[@richarddavies5674]

Restoration videos are great. It's the ultimate respect to the craft seeing a great machine or object being restored to its original state

[@PlantNatives]

Do you have any other favorite channels showing this?

[@xaviervandorn9085]

@@PlantNativesinheritance machining is great

[@lawi8275]

The company Blohm ( 17:13 ) from your machine from 1966 still exists today and makes amazing machines. I know their CEO and it’s funny to see these old lovely machines still being used 😊

[@AdamMclardy]

Show them this video!!

[@jkforges]

Thanks for letting us come over and play with your old German friend! We should be posting some updates and videos on its new home in the near future! Happy forging and good luck with the new tools and titanium damascus! 😄🔥⚒️

[@ChillmusicGermany]

With the AC GA 37 FF you need to be sure it got serviced properly. Then you should be ready to go for a good while. My recommendation is to do an service every 2000h of running or 1 year. Every 3 services should be a big service with the oil shut off Vale etc. It's a proper machine and if you have any questions regarding your new Compressor just ask. I am a specialist in Atlas Copco Compressors.

[@AlecSteele]

Thank you very much! It just had a service done on it, so hopefully we will be good for a year 🤞🤞

[@ChillmusicGermany]

@AlecSteele That's very good if something happens with it just message me and I am confident, that I can help you 🤙🏻

[@blah0man]

This I just messaged this exact same thing, good on ya! Absolutely worth the maintenance.

[@AquarianSoulTimeTraveler]

​@@AlecSteeleyou might consider running a used oil furnace... Automotive shops run these all the time... Why pay someone to get rid of your oil when you can heat your shop with it...

[@StarScapesOG]

I was able to find a company called Airmaster Fan, they are a branch of the company Maico, and produce industrial fans, ventilation equipment, and industrial heaters. The Olympia Works plant in Leeds seems to have belonged to the Blackburn Corp, who manufactured airplanes through both world wars. Another company called Airmaster is currently in Denmark and focuses on large-scale localized ventilation. Hope any of this helps. It was a fun hunt.

[@AlecSteele]

Much better googler than me!!thank you!

[@StarScapesOG]

@@AlecSteele no problem!

[@zotzot5]

i think my highschool has that exact model of vertical bandsaw, try spinning the material selector, there should be an option for asbestos!

[@leftaroundabout]

That's of course also why it has this convenient air-blower built in, to make sure the sweet asbestos dust reaches every room in the school building!

[@randomphantom3976]

I legit broke out laughing in a parking lot reading this. XD

[@lbgstzockt8493]

@@leftaroundabout sharing is caring after all.

[@bigsmackisback2052]

@@leftaroundabout Ouch, thats a horrendously dangerous combination of already scary equipment

[@Zogg1281]

Yeah, he might want to give that bandsaw an extra deep clean..... while wearing a reporter 😅

[@jtcustomknives]

That dust extractor is normally used on bead blast cabinets. DO NOT SUCK UP SPARKS OR YOU WILL HAVE A HUGE FIRE.

[@timlfrench]

The tool you made to remove the grinding wheel is a spanner. Because it spans the two holes in the piece you are turning. If you use it on a bolt or nut it’s a wrench. At least as far as I know.

[@PrplVibes]

So glad I found this guy, I also love how much head scratching is in the time lapses

[@oldtruckswork8989]

You will probably find that you want a little bit larger air storage tank. Also, it's an oil injected screw so having a condensate collection system that separates oil from water would be useful. The tank blowed down connects to that. Finally, a coalescing oil/ water filter would be a great addition.

[@Slick_Echo]

I don't know if its just my engineering enjoyment side of machines but every time you repair and bring a machine back from being forgotten about it makes me happy. Thanks for all your videos over the years Alec

[@jordanthecommander6977]

As someone who used to work in a manufacturing shop, that side flap trailer made me incredibly envious.

[@awesomecronk7183]

I saw an accordion covered flatbed for the first time at a customer's site the other day. Cool af!

[@jort93z]

These are very common in europe and the UK.

[@shauntronics]

My very first job after I left school in the mid 90s was in a factory with my Dad, I was often in the tiny access area behind the guilotine whilst it was being used to cut phosphor bronze sheet in to strips. I would collect the strips, count and stack them for the press operators to then press them in to the required shapes. Absolutely terrifying at first but you quickly get used to it, although my hands were often cut to shreds from handling the strips.. Great content, brings back so many memories, keep it up ;)

[@steven.-pw6xb]

This is one of my favorite channels. Love watching Alec refurbish these old machines. Maybe it’s time to purchase an old forklift and rebuild it. I’m sure should are using up your chits with your neighbor. Keep up the great work.

[@TheMotlias]

7:52 the saxaphone as the background music honestly sounds like somone screaming while you explain how the dust extractor works 😂

[@BarryTGash]

Working for a printers the scariest thing was the guillotine - a beastly 8ft that cut through 500 sheets of 350gsm like air. A device that can do the same through metal? That's nuts.

[@billdoodson4232]

It's the sheeeethunk noise of a paper guillotine that used to give me the willies!

[@stevekreitler9349]

I sharpen three foot shear blades for local printers- they are terrifying!

[@thecatofnineswords]

Seeing Alec putting his hands inside the guillotine had me Concerned, they have multiple safety interlocks for good reason!

[@Soundpost-f2l]

I work for a sheet metal shop...we got one that's about 15' wide and can go straight through half inch 304. Right up there with the big manual lathe in the back on my list of scariest machines to run.

[@EC-dz4bq]

@@Soundpost-f2l At Columbia forest products... those lathes that pick up and shave entire oak trees into 1mm thick wood sheets in seconds... is scary. People have died...

[@DryW4t3r]

You might want to invest in a fence (I don‘t know the proper English term for it) for your shear. It helps you keep the sheet metal square and lets you measure how much you cut off. But then again, that makes the whole machine a lot bulkier.

[@martinuso7446]

Power shear tip: make it so you have to push a button with each hand to unlock the footpedal. This way you keep your fingers.

[@rakeshgs7620]

I would just like to say that most of the reason I watch this man is purely because of his personality and enthusiasm for the follies of his work - nice job Alec, hopefully we'll get another video soon :)

[@drshroom8972]

Heya, CNC-Machinist apprentice from Germany here. I have a quick tip for you regarding work safety using the metal shear: I highly recommend welding steel-mesh infront of the pistons that hold down the sheet with just a small gap (less than 1cm) under it. This way you can still insert the metal sheets just fine, you still see where you will cut, but the risk of getting a finger or hand into the shear or under the pistons is much lower. Just make sure you do not weld it to any moving parts (for obvious reasons). Take Care!

[@delphic464]

9:46 I've had dust collection in my shop for years but just installed an air filter similar to this. Had it running for less than 30 minutes and I was kicking myself for not doing this years ago. I had the exact same reaction as Alec...all smiles and glee.

[@jonshellmusic]

8:21 “Hang on, its got sticky buttons right next to this hole which sucks?” 😂😂😂 Best laugh I’ve had in a while!

[@tejas_v90]

same here 😂 was looking for this comment tho, lovely joke.

[@aserta]

Build a baffle house around the compressor. That should quiet it at least 20~30 decibels. If you vent it to the outside (using the windows above), maaybe another 10~15. VERY IMPORTANT, take it off the ground and put three mats of increasing rubber hardness, in at least 6 cm (total), thickest being the softest, and thinnest the hardest up top. The top one should be as hard as the rubber on a quality boot.

[@akelekarinha10]

Alec is losing his sanity

[@akelekarinha10]

This is so much fun to watch

[@shadewolfgames3119]

What sanity?

[@TheDulcedo]

Has he ever had it 🤣🤣🤣

[@Volt64bolt]

He lost it a long time ago

[@MartinBalle7]

You can't loose something you don't have 😂

[@munchegod]

Literally just been compressor shopping myself. Make sure you run the screw compressor hot, you don't want it to idle all day as it can cause issues with water emulsifying in the oil. If you're running on and off the piston compressor is ideal.

[@Ruboka]

keep those restoration projects going :D and i am here for it. the level alec goes to to understand and fix the machines is so captivating. power hammer are soo cool. lets see how those will go

[@latiandaytona826]

2:28-2:47 the most relatable Alec Steele ADHD moment montage I’ve ever seen. The spacial unawareness, to the unobservant to someone taking away your only way down from the upper rafters, to then fumbling over your brain and your mouth till you just have to stop because you overcomplicated it up enough. And then finally figuring out what to say after its already too late. Oh my god, I love you, Alec. No homo, but oh my god can you just be so freaking genuine 😂😂😂love your videos and as an inspiring Lapadist/Jewelry Crafter, working with metal can be so fun and seeing someone like you was really inspirational! And this video sums it up from all these years since subscribing to your channel! Here’s to many more years! This damascus series is blowing my mind!

[@marcelenduro3009]

I love these workshop videos!

[@Druid_Plow]

23:00 That was actually pretty legendary your neighbor was ready to kill the power for you. I wish I had more neighbors who were willing to help each other out, so many people are only focused on themselves they don't even see the others around them

[@AlecSteele]

My neighbors are amazing! I’m very lucky!

[@sealdoggydog]

21:02 "It'sa me, Mario!"

[@sirhejsan3948]

Love how giddy alec is about ALL the machines. "It has a saw welder 😀" is going to be living in my head now

[@LittleGreyWolfForge]

5:07 NOT THE PALLET JACK 😭 What would Will say, Alec?

[@alexnicholson9329]

whatever do you mean it was clearly a pallet Jamie

[@LittleGreyWolfForge]

@@alexnicholson9329 😂

[@The_Keeper]

What would Will say? In my experience; **crash-n-break!** "NOOOOOOOoooooo!!!"

[@FrankRoosevelt32]

17:21 that "JAMIE!" got me good lol gave me a nice chuckle.

[@ShackledAnt]

It's so cool seeing how far you've come Alec, makes me want to get started blacksmithing myself (I've always had a deep interest). Also Jamie scaring you never gets old 😂

[@ramonpizarro]

He got Alex good this time, he was proper mad

[@LeonardChurch33]

Alec, I love that your shop is a moving target. I think a lot of people get hung up on the idea that they have to build their perfect workspace the first time. Watching you rearrange and figure out what works best for each new tool and job has been a really cool journey.

[@b62boom1]

Awesome stuff! On a bandsaw, you want the blade guide wheels as close to the piece being cut as possible to stop the blade wandering off the cutting line.

[@idontwanttopickone]

You might want to take out those bags in the extractor and make sure they aren't ripped or getting thin. Fabric interacting with metal dust will surely wear away the fabric over decades of use. Replacing the bags is probably very cheap compared to the price of the machine. I also wondered if they are cotton, considering cotton is what is often used in candle wicks. Might want to replace them with a none flammable alternative. You could probably just get someone to sew up some bags for you based on the ones that are in there already. It would probably only take an afternoon of machine sewing, if that. Certainly worth the time to have cleaner air.

[@mykeymato]

That was some seriously quick response time hitting the breaker, Nice work Matt.

[@SomeoneNone123]

It always good to keep neighbours you like alive. You can never know who moves in next. 😄 Thanks Matt!

[@dappergenesis822]

@2:04 that little excited run was hilarious, you just know his so pumped for all this

[@Physicus9]

Hey Alec! I'm M. Duffy, the guy from KTC and sent you the nepros tools that should've arrived on Friday. Please let me know what you think of them when you get the chance. I think I may have already told you in the email, but we have one of the top-level executives from KTC coming in this week and I would love an (even if just a preliminary) update on your thoughts about the tools. Since this is my first go with promotion of the brand, I'm pretty nervous so any updates would help a lot to alleviate my concerns. I appreciate your time and effort! Also: sanctimonious bovine! That's a heck of a lot of 'new' equipment. Glad to see you're getting the full capacity of the workshop capabilities back (and more!) in the UK with all of it! Have a wonderful day

[@justinbanks2380]

9:22 I love the relationship you two blokes have and leave in your videos. Like this and when he took the ladder away earlier. 😅

[@justandy333]

220 CFM!! Bloody heck that things a beast!! And I thought my little 12 CFM compressor was gutsy! Boy oh boy you're winning at air compressor top trumps.

[@lasaldude]

Now this is content. Not saying his previous stuff wasn't content because its great but this is something anyone new to the channel can just start watching without much context and love it.

[@schoenbaum]

the most relatable thing ive ever seen...hit your head on a beam... cry in pain then hit the beam making it worse

[@Jacob-W-5570]

I think all those years i've been here, I've seen just as many workshop rearangements and new tool videos as making something videos XD love it.

[@emilsgaardsrensen842]

fun fact Airmaster is very much still in operation.

[@henningbutz2289]

the rusted bits of the surface grinder look like they could be used as a sacrificial anode to prevent the galvanic corrosion on the more important parts. If you do end up replacing them make sure you have a sacrifical anode somewhere on that machine.

[@Madissen]

By watching this video i now also have the urge to buy old machinery and get it working again. Love the video. Keep it up.

[@joe_preston]

The blade welder is handy, drill your pilot hole feed the blade through the part, weld, cut the part then cut the blade again as an easy way to cut big internal pockets fast.

[@daveperkins2927]

Filter in the extractor DEFINITELY needs changing. The colour of it suggests it's pretty clogged.

[@DryW4t3r]

Maybe he can remove them and chuck them into someone else‘s washing machine :D

[@hanswurst-h3e]

nah, the solution is like alec already said to get it outside. Even new these cotton bags do nothing for fine particles which is what you want to get rid of

[@JesperHjelm]

This is actually the best videos, machine repair/refurbish content!

[@SuperCookiemonser]

THat's so cool seeing a machine made in my hometown! I live in hamburg.

[@philipdunn-asselin1640]

Been watching the channel for years now - since you left for America and then moved back to Britain - and its really cool to see the shops evolve to what I dare say now looks to be a fully kitted machinist's shop and love that you decided to keep the steam hammer! I cannot wait to see what future projects you two decide to bite your teeth into. :) P.S. Jaime, those scare-jumps will never get old mate. Got to keep him on his toes.

[@ontic2354]

With that compressor and the air you can flow I would move to some air tools-pneumatic grinders, lighter and quieter, etc.

[@jono6379]

I think as quiet as the tools are that giant air compressor in the middle of the shop might be a bit loud😂 probably why he doesn't want to run it all the time

[@Rsama60]

Actually I would not recommend to do that. Compressed air is the most expensive form of energy you can have in a shop. Way more than electric energy.

[@michaelescobar89me]

I wouldn't recommend running sheet titanium through that shear. . Those blades will dull quick. It's great for pretty much all else

[@p.o.3889]

With Jamie's 'stache and the following few sentences I think there is a grinder/Grindr -joke somewhere in there.

[@hammerth1421]

Good old porn ‘stache

[@jsweizston5410]

Get yourself a guard for that band saw, if you're doing anything circular or whatever it'll at least help with stopping the blade from sucking your fingers in there. Might sound stupid but power tools are no joke. I've found that out the hard way as a tool and die maker going thru my apprenticeship.

[@xliquidflames]

16:02 Could those corroded blocks be there as sacrificial bars of metal so that they corrode instead of the important parts? I'm a computer geek. I don't know the first thing about any of this stuff. I just really like Practical Engineering and I learned on his channel about bridges that they use sacrificial bars to keep the important parts of the bridge intact. Could that be what those corroded blocks are? I really love this channel, too. It's so entertaining.

[@piergiorgio919]

If the whole piece is aluminum it's probably accidental, fortunate in a way. Sacrificial anodes look very different, also you only use those for submerged stuff, there is no reason to put them on a surface grinder. Even though there clearly was some corrosion it was probably due to bad storage with stagnant water. No engineer would place them there and if they did, they'd look different.

[@potetew4510]

That dust extractor works almost exactly like an industrial vacuum separator that a lot of car washes use.

[@RobertGracie]

When Alec uploads, everything else stops, I have to watch Alecs stuff first, thats a rule!

[@cocodojo]

Indeedy! Gotta stay up to date with his shenanigans (as well as Jamie's shenanigans)

[@sackharrell]

Idk if anyone has said it yet, but adding dryer or two to your air compressor before the tank would be a pretty solid idea. Also beware the blow off on that big guy, I guarantee in your shop it’ll be loud as all hell.

[@roman85360]

at 11:05 , i love you jamie, i didn´t laught so hard for a long time. sorry alex 🤣

[@AmUnRA256]

Laughed also way more than I should. Jamie you are a c*** for that, poor Alex

[@AndreasHontzia]

The longest beep ever... 😂

[@noc1891]

spat out my coffey 😅

[@hexsymbol2229]

Thanks for the little trinket you gave to the delivery driver today. Been watching you since you started out in your barn with just the one little forge. Was well cool to see that I was partly involved in getting your compressor out to you to run such an awesome steam hammer. Keep up the great work

[@tw38203]

The surface grinder was made here in my home town in northern Germany, Hamburg. What a coincidence!

[@lawi8275]

The company still exists and is thriving!

[@tw38203]

@@lawi8275 No way thats awesome!

[@philwellbelove5901]

That bandsaw was the curse of every British Aerospace apprentice. Welding that blade together was enough to drive anyone to tears....I feel your pain! 😂😂

[@BMLEATHER]

Have really been loving the videos. And all this new equipment has me real excited for the future.

[@Wawwy]

When you move the dust extractor outside the grinding room, be sure to pipe in the return air otherwise you will reduce the efficiency of the dust extractor

[@paulroberto2286]

LET'S GO GAMBLING! aww dangit! aww dangit! aww dangit! aww dangit!

[@MadWiking]

Thanks for sharing these awesome videos, Alec!!! I love these fixing up and getting to work vids!! Best regards from Norway!!

[@hugsparty]

15:42 Jamie's legs look different but I can't quite put my finger on it

[@silygoose95]

Nah it's definitely Jamie 💀

[@Samuelpeters15]

I honestly thought Jamie was wearing leggings and crocs with socks for a moment 😂

[@matthewweatherby6799]

alec not sure if the shear has a fence but if it doesnt you should add a machine fence square to the cutting edge and you want to cut as close to the fence (put fence on the side where the blades are closest) as possible to prevent blade from walking out.

[@AlissanWeb-hq5hc]

Hey Alec! Just wanted to give you a piece of advice/an idea. Get your heavy equipment on wheels, that way you can move and re-arrange the shop more easily; great for cleaning too!

[@ScamstinCrew]

In our sheet metal shop we made a return shoot on the back of our shear. Basically a diagonal pan where drop from the off cut side can fall and slide to the front. Most of the time we only cut 10-12" anything more and we would have a guy behind to catch them.

[@Austriantrainguy]

NOOOOO not an air compressor!!!! Build A boiler!!!!!!!!!!!!!!!!(Coal/wood burning)

[@Ihsnetad]

Home build boiler will definitely unalive Alec quicker than anything in his workshop

[@garrettshadbolt6443]

That really would be the most dangerous thing in the shop

[@Deja117]

Build one? I don't think any professionals will even be willing to help him with that as they know just how dangerous DIYing a boiler to operate at that pressure can be. I really, really want to see him build one too. But I don't want his walls falling down because of one mistake, or boiling water giving him third degree burns all over because the welds didn't hold. :(

[@AutoBrawn]

Love that you are keeping the old steam power hammer! Also really neat to get a walk-through of all the new (to you) machines. Really neat that the surface grinder is from West Germany!

[@errorsniper_404]

Not gunna lie. I would 100% watch multipart restoration videos for any of these machines like you did with the steam hammer. The knowledge you are acquiring now also means if you ever wanna step away from youtube. You could be one hell of a machine consultant.

[@carlmanns9232]

Jamie scaring Alec shows how good of a friend he is. Only a good friend will keep you on your toes like that.

[@jonny555ive]

Winning with such a big gamble is the whipped cream on the Sunday. Congratulations Alex, you keep up the fantastic win streak..... Looking forward for some beautiful titanium Damascus builds very soon. 👍👍

[@richardfrye4794]

I am a new subscriber from Reno Nevada in the USA. I absolutely love your content. This episode with the addition of the new machines was awesome. I love how you show us how you clean them put them together and get them running. This is definitely content that I am interested in! In fact, all of your content is very fun and informative! You have my attention

[@literalfire1927]

I'll just sit over here and live vicariously through you, experiencing the joy of new (to you) machines and seeing them come to life once more. Love that you kept the old steam hammer, really looking forward to hearing it come alive again with that new compressor system.

[@Pexodus11]

Using those band saw blade welder things is an absolute nightmare to figure out. I never tried annealing it with a torch tho. Maybe that's the way to go

[@ricardomenendez2709]

I always get excited when I surface grinders. They really aren’t used as much in commercial manufacturing but I use one everyday at work. You can do so much with it!

[@Daibensou]

I'm glad to see there are some 'new' and 'not so shiny' bits of kit to be renovated, enjoyed and used. Looking forward to seeing all the future endeavours and antics this channel takes on.

[@dogtownoon9791]

the grinder takes me back , balancing the wheel dressing it and sending parts flying across the shop lol

[@CodyWolfe-l1y]

Man I love your show! I watch it with my kids too! I get to share my love with the shop life, and these old machines. I get to live and teach my kids vicariously through you. As a machinist I love what your doing, and I'd move to Montana in a heartbeat to work in a shop and for a guy like you. Love it man! You and your team do a great job! Keep it up!

[@DOTTOTW]

Love these videos! ❤ Please don’t rush. I personally love seeing machines being cleaned and come back to life 🎉

[@jerrylim6722]

Alec's impulse buys are singlehandedly keeping him from getting a larger shop to fit all of it in, Lmao.

[@justinhobden2107]

We used to have Airmasters at the newspaper printers, they would suck away any dust or paper spaghetti from the cutting wheels, before wrapping around the kites and into the folder. Cleaning them out was a messy affair! Keep up the great work guys. 💪🏻

[@Deja117]

02:28 I felt that... It's always them darn roofs that get you. I'm both surprised and happy that all these seemed to work.