Singer 29 Shoe Patcher Sewing Machine, How To Thread and Load the Bobbin. The 29K 72 on Servo Motor.

This is a Singer 29 sewing machine, the Singer 29K 72 shoe patcher operating on a servo motor. I show the various features of this machine and show how adjustments affect it's behavior. I show how to load the bobbin with thread, load the bobbin into the case, load the case into the machine. I show how to thread the machine too. I operate this machine on a servo motor with a 45mm pulley with good results.
The needle - 29x3 cloth and 29x4 leather
I am not sponsored and I buy all these industrial sewing machines and tools myself and so anything you do to help support this channel is appreciated.
I have cool T-shirts, Stickers and Mugs with the classic Alexander Dyer Logo bit.ly/AlexanderDyerStore
Threading Wire: amzn.to/3mUBT4l
Needle Threader: amzn.to/2M9qwIV
The Tweezers I Like: amzn.to/37WN74a
The Servo Motor I use: amzn.to/3rBOjBK
Servo Motor 45mm Pulley: amzn.to/2L1ykfk
You can find a copy of the manual here: www.manualslib.com/products/S...
Here's an all time list of Items I have recommended :
www.amazon.com/shop/alexander...
Subscribe to My Channel:
kzbin.info...
Monetary Support is Accepted Here:
/ alexanderdyer
Thank you very much for all your props and support, anything you choose to do will help me to make more content.
As an Amazon Associate I earn from qualifying purchases at no additional cost to you.
Filmed, Edited and Produced by Jason Potts

[@AlexanderDyer]

Thank you for checking out my video. Be sure to check in the description for more great information like links for the manual, tools and equipment I use too. You can also help me out by clicking 👍 under the video.

[@grzegorzmakarski8867]

You Sir saved me. Like really saved me... I had some issues with my 100yo Singer 29k31 and after watching your video and carefully inspecting what i have wrong on mine - finally, after 8mths of being useless - SHE SEWS LIKE A CHAMP! You absolutely deserve a medal!

[@maggiealena]

I have a 1913 29-4. These are great machines. I will never sell this machine. I bought it 8 yrs ago from someone in ohio and it didnt have the treading rod to thread it. No shuttle, no spool pin. Had not been oiled in decades. I bought it for $300 + shipping. I had to sink more into it to get it like It was originally. Had to have one part custom made. I also bought a treadle for the machine. I was told its rare to get a 29 treadle by itself. It two was rusted. I had to have it sand blasted. Then took it to a paint and body shop that restored the paint to original singer paint epoxy. Everything has sewing machine oil and the inside has been degreesed and oiled. It a beautiful machine now. I run it with 2 rubber belt to give it strength to punch through leather. I will put this 29 against any commercial machine out there. Thanks for the video.

[@trafficjam.]

What Kind of motor did you buy for it?

[@Balkongodlaren]

You lift the presser foot when darning and that releases the "normal" tensioner, that's why you need to use the one on the side of the head. That one is also commonly used for winding the bobbin, at least if you have the hand wheel and bobbin winder mounted on the front of the machine.

[@AlexanderDyer]

Yes! Of Course! It seems so obvious now that you have said so. Thank you very much @Balkongodlaren

[@TrickleCreekFarm]

Thank you for sharing this!

[@seniorLu48]

Thank you It helps to know, I'm looking to get one of these in the future.

[@annhogg7500]

This has got to be one of the best threading of a machine I've ever watched, thank you so much.

[@AlexanderDyer]

Glad you liked it!

[@chematta2745]

I was on the fence about this machine, watching all other videos and the general info everyone gives. Your video was all inclusive and very well done thank you sir, I'll be buying that machine this weekend!

[@danielsmith9513]

Thank you for the high-quality video on this machine. I have a 29k71 and have really enjoyed your explanations. thank you again.

[@Mikishots]

Ingenious and fascinating. I love mechanical devices, and this machine was obviously a game-changer in the shoe industry.

[@AlexanderDyer]

👊💪💥

[@ggazzara1115]

Thank you for this very informative video! I have had a 29-4 treadle model for 20 plus years and learned a lot from this video. I also just acquired a 29k-60 in it's original treadle configuration. These are great old machines. Iv'e used them for sewing patches on leather and installing zippers on jackets etc. These machines really out perform a normal household machine for doing heavier work.

[@carlkylef.6715]

The holes in the lubrication cup are for holding a felt pad in the cup. The thread rubs across the pad to get the lubrication. My 29K 73 still has the piece of felt sewn into the cup.

[@duckilover]

I owe you a serious thank you for this video. I purchased an Axis 2792B in Oct 2021 (my first sewing machine after years of hand sewing only) and I have not been able to figure it out since the manufacturers' videos are incomprehensible to me (not to mention having no audio or on-screen instructions lol). Your instructions are detailed and clear, and I now hove the confidence to have a go at this beast! Thanks so much:)

[@donniebell862]

I have a 29K66, enjoy sewing an patching on this machine. Relocated hand wheel to front an replaced worn gears. Took a while to adjust but am enjoying using my machine for shoe, boot, an sewing patches on coats an vests. Mine was made in England in 1940.

[@TalRohan]

Thanks very much for this, you just saved me a whole bunch of time trying to work out why my machine was walking backwards...it wasn't I just had a weird set of instructions that told me it went the wrong way. I appreciate all the little tension setting stuff too. Cheers and thanks for sharing

[@dwtim172]

Cut my teeth on one of those classics, had a treadle and motor drive. It's my next machine to purchase. Thank you

[@richyearle007]

I love the resolution of this video and that you spent the time to have in focus the area you were discussing.Thank you mate,much appreciated.

[@AlexanderDyer]

Thank you for your astute observation and kind comments. Please come back for more.

[@kimlightfoot]

This is a super interesting sewing machine Alexander. Thank you for preserving, and improving these old machines.

[@AlexanderDyer]

Thank you for all your support.

[@shonji57]

Thank you Alexander , I have a 29K58 which I love for my Marine Canvas Business. The find tuning is what I need to see !

[@Automedon2]

I'm getting one today. I have 5 other heavy machines but I think this will be a lot of fun to get going again, and this video will be a good reference. Thanks.

[@theresamartinson8037]

I have a 29K60. It has a few issues but you have helped me understand it better. Thanks

[@GaryT1952]

Incredible machine, amazing engineering...love the way you twist the ears to change direction

[@AlexanderDyer]

Agreed, amazing engineering. 20th century technology!

[@selenamrtnz1]

This was the best and most informative tutorial ever. Very well explained. Thank you as i just bought one and am waiting for the mail to receive some bobbins

[@p.diazmolinaro6105]

Muchísimas gracias! Excelente la explicación y la calidad del video para poder apreciar bien todos los detalles. Me ha ayudado para saber usar mi Singer 29K51.

[@livesoutdoors1708]

I have a 29-3 treadle that I just love. I use it for canvas and outdoor fabrics. Hubby sews saddle leather in layers with it. It’s our beautiful beast!

[@AlexanderDyer]

Very cool.

[@seniorLu48]

A patch machine is one that I don't have, looking towards the future. Very informative on different models. Gracias

[@leonzimlich8944]

Great to see a new video from you.

[@manfredschmalbach9023]

Thanks for this very helpful introduction to the 29k model. I'm in the process of restoring one and appreciate Your effort to share Your findings!

[@AlexanderDyer]

🙏

[@davidnash8586]

Very clearly presented ! I'm CONSTANTLY having to adjust the tensions on my 331K4 which I use for furniture weight leather which I use to make purses, wallets and bags and I'm either really happy with it or driven bonkers when the 40 thread I use snaps or messes up in some way !

[@FiddleyBits]

Thank you!!! Learned a lot!! Excellent as always!! We have a 1911 29K2 that we use often and wouldn't be without.

[@AlexanderDyer]

I love to hear when I can help existing owners. These are great machines for sure.

[@shastylesdesign]

dope! I have a axis shoe patcher thats modeled after this and all of the parts are similar! this video saved me soo much hassle thanks

[@AlanR8756]

Excellent informative video. Much of this also applies to the singer 29-4. Thank You.

[@vsmetc7305]

Thanks. I got the same machine a couple months ago. Your video taught me a couple things. Mine is in great shape and stitches well. I need to get it mounted on a movable base.

[@AlexanderDyer]

You can buy them. I made mine though. kzbin.info/www/bejne/sKiVgKqCj89mjpI and kzbin.info/www/bejne/opuuqHhvg6d0Z7c

[@glockstitch]

Probably the best 29k I’ve ever seen. From the paint to the badge it’s seriously beautiful. I just got a Chinese patcher machine and had hell for 2 days trying to get it to stitch. I’m very happy w it but damn brother I dream of this machine. Thanks for posting. Hope to get one one day.

[@ramloganfracic5761]

Thank you for sharing. I am amused by the way the machines of yesteryear were made. Blessings. Viewing from the French island St Martin in the Caribbean.

[@earthelder2065]

That is a neat machine! I really enjoy your videos, thank you!

[@AlexanderDyer]

😀

[@randal1470]

Awesome, one of my favourite machines, and on my bucket list.

[@AlexanderDyer]

Good choice!

[@DannyMcLaneDC]

This totally fixed my problem ❤ thank you so much

[@jasonw2696]

Thank you for making this

[@elaleman022]

Gracias desde Argentina , eh adquirido la k71 y tus tips me sirvió de manual usuario .

[@rondianderson4402]

Very clear and thorough. Thank you !

[@AlexanderDyer]

Glad it was helpful!

[@surfearth1]

Finally a video on KZbin that explains the model numbers! Thank you!!!! Can you do more videos on this machine? Service and oiling maybe?! Thanks in advance! Awesome video!

[@AlexanderDyer]

Thank you for the kindness. I have sold this machine so that is all for now.

[@yoerim360]

recently acquired 2 29k's and this is a great source on how to get into using them

[@AlexanderDyer]

👍🙏😎

[@cabreraemil]

Indeed! Great value! Thank you!

[@oscarortiz2318]

Muy buena explicacion descriptiva

[@JebbAdams]

What an interesting machine! Cool! Thanks Alexander!

[@AlexanderDyer]

👍

[@darinelmoreno2957]

Quiero leer en español

[@TJPisano151]

Very helpful video ! Good job

[@dude36]

Thanks. Very informative.

[@marieagnesoliviercollet4647]

Excellent vidéo. Will be use full to help me to tune my 29K71!!! Thanks a lot for sharing knowledge.

[@AlexanderDyer]

No problem 👍

[@peterbryenton]

Helpful, thank you.

[@brianpeers]

Once again a very nice video presentation. The blue accent illumination is interesting. I like it.

[@AlexanderDyer]

I find that these colored lights, accent the different forms and curves of the machines which has been a challenge to capture, especially on black matte finishes like this one. I am glad you like it. Thanks for saying so.

[@paigeraupp8280]

Enjoy your videos. This machine is woooo cool

[@AlexKall]

Nice machine, wouldn't mind having one!

[@dlsgl407]

Gosh that's a beautiful machine

[@barttroxler7980]

You are an absolute lifesaver! Thank you!

[@AlexanderDyer]

Your welcome. Glad it was helpful.

[@schandler4958]

Great information. I have one but have not been able to get it to sew. Will have to get it out and give it another try.

[@AlexanderDyer]

It is worth a shot.

[@ramloganfracic5761]

Thank you for sharing this wonderful video Very interesting. It's a Rollys Royce

[@pathickey2553]

I enjoy these videos, thank you

[@AlexanderDyer]

Thanks for watching!

[@houseofvalourleather1162]

Really appreciate for value information you shared

[@AlexanderDyer]

Glad it was helpful!

[@JanetDiaz6152]

Thank you for explaining. Pickup a 29k70 to sew patches....:)

[@phillipcraft3165]

I have a 1936 29k71. It is the first machine that I named. I was made the year my mom was born, Cona Jean. I have had it for about 8 months and love it. I had to do some minor adjustments and it works great. What you call the darning discs is what I learned to use when I wind a bobbin. The one thing I am not aware of is the thread hole in the top of the bobbin pin I have not known about it. I will have to look at mine, but it has seen well without it. Great videos!

[@postholedigger8726]

When the hand crank handle is in the front the tension plates in the front are used for winding bobbins. The front tensioner is also used when the oil cup needs to be bypassed. The cup lubricates the thread for sewing leather. The front tensioner is used to sew cloth. In that case you would not want to use thread soaked in oil. Without the front tensioner option you would have to clean out the oil cup to sew cloth. david

[@devriescustomleather1109]

well done

[@donnam4229]

Great voice. If you did books on tape, I'd listen.

[@wormwood6424]

Thank you soooo much!! Just wanted to find out how to adjust stitch length!!

[@AlexanderDyer]

Glad I could help!

[@kempaswe4022]

Got one 29Ki and one 29K3 that my grandfather used in his shoeshop until he closed in 1947

[@AlexanderDyer]

😍

[@TEAMBuenaventuraSewingisLife]

Wow thanks for the tutorial im also like others a sewer from philipines

[@piecetoyou8285]

Cheers buddy, great info now

[@AlexanderDyer]

Cheers, Thanks.

[@outcast7899]

Thanks for info, I have 3 singer 15-91s and love them but came across a 29 in good condition Ive never used it but think its just a cool old machine. Would probably sell it for right price but shipping would be painfull. This thing is a ship anchor !!! I love these old machines and tractors too. Lol M L Rogers Pasadena,TX

[@franksollier1942]

Thanks for a realy good intro of how to use tis maschine. I have a problem: the upper thread keeps breaking. Whats the solution? Frank

[@carloquinn3470]

Excellent Video, By chance do you know what the part is called for the lower tension that has the bold that was at one time adjusted at factory?

[@TyroneDamShewlaces]

Awesome. I have something similar I picked up a while back (Adler), and after watching this video I went to see how mine measured up and discovered four things that weren't working right. Now I know what to do. No wonder the thing sewed like crap!

[@AlexanderDyer]

Glad I could help!

[@bernardvreulink2457]

Thank you. Very informative!!! Now to try it on my one machine ... ;-)

[@rogelioortizv3562]

Muy buen video

[@arivaldonunesarisnunes7150]

Show agora melhorou muito em legendas em português. Muito boa suas explicações é principalmente deste equipamentos em que temos poucas informações por aqui. Muito obrigado e parabéns pelo belo trabalho.👍🏻

[@AlexanderDyer]

😃

[@LeatherHomestead-io8dt]

Really good thank you!

[@AlexanderDyer]

Glad you liked it! 🙏

[@LeatherHomestead-io8dt]

Yep i have a 29k71 that was made in great Britain really sews nice not sure of the difference in US made.@@AlexanderDyer

[@angelrodarte2029]

Exelente

[@ARYAIEE]

Tanq so much,that was very useful. Cud I ask if this machine works with short or long needles?

[@miguelmoreno1326]

Sr. Alexander excelente video . Gracias ,muchas gracias por compartir sus conocimientos y su experiencia. Aprovecho para preguntarle si nos pudiera hacer un vídeo de cómo poner a tiempo una máquina 29 k 71 (timming) Agradezco de antemano su atención . Gracias Sr. Alexander.Soy Miguel Moreno de Cd. Madero Tams México.

[@filcordo]

salut , j'utilise la même machine depuis 10 ans et pourtant je viens d'apprendre 1 ou 2 utilisation dont je ne m'étais jamais servi faute de savoir ou d'idée de le faire de cette façon alors que c'est prévu pour !!! donc merci beaucoup car si pour le reste je connaissais il s'avère une fois de plus que 1 on en apprend tout les jours et 2 le savoir ne vaut rien si il n'est pas partagé !!!! merci et bonne journée à vous forces et respect

[@johnjairoduquebarrera6969]

Señor Alexander,buenas tardes desde Colombia, excelente vídeo,gracias por traducirlo. El tensor que muestra a un costado se utiliza para cuando se recarga hilo en el cartel dela bobina de abajo,esto para cuando el volante está ubicado en la parte lateral de la máquina. Nuevamente mil gracias.

[@sewingmachine1974]

Good day

[@loriroberts8194]

Thank you! This video was great. I have an Adler 30-1 which is very similar. I was having a few issues. Your video was helpful. I only have one issue and that's when I turn the head to go 180°, the needle touches the foot which results in broken thread. Can you offer any solution?

[@mathguy829]

Great video. Very informative. Where can I find one of these machines? I like its simplicity.

[@airnashville3883]

I have the same 29K72 on it’s original base. What a great machine. I’m clueless on the darning discs...

[@AlexanderDyer]

I have learned that since darning is done with the foot lifted the darning disks are independent from tension release.

[@edwardolivares5038]

Thank you for sharing 🙏🙏 but when can I get a servo motor installed on mine ? Any referrals around the chicago area ?

[@adyjames8204]

I’m second on one of these machines this week. Hopefully the other buyer backs out.

[@TonyB607]

I have a 29k58 patcher and your video is the best I’ve seen explaining the adjustment on the pressure foot and the thread take up leaver. The bit you adjusted at the end of the take up assembly is missing on my 29k58 and it is causing all sorts of issues. I’m trying to source a replacement. Many thanks again for your excellent video. If you get chance to reply I’d love to know what size needle and thread you used in this video.

[@jenkins1979]

I have a singer 29-4 what size thread will it take? Also can I use same size thread top and bottom? Thank you

[@Joerg618]

I think the two plates are brackets that guide the main thread towards the bobbin on the rotary wheel. The bobbin thread is wound directly from the roll.

[@MAsWorld1]

Question: I see that You take the tread off the top of the spool, but I’ve seen the thread peeled off the side of the spool. Seems like one methods would create additional twist in the thread. Does it matter which way you unspool ?

[@zarahenry1682]

I have a 29k72 that i recently got from a retired shoe repair shop. I am finding that the presser foot does not seem to lift when stitching, it will lift with the lever to insert or remove a piece of work however as it stitches it just sort of shuffles forward without lifting the foot even when i put the adjuster to “h”. Any input on what i might look to fix would be greatly appreciated!! Thanks for the lovely video:)

[@jenkins1979]

I had a 29-4 given to me by my wife's family and am trying to get it sewing.I now know that a 138 top thread and bottom #69 thread with #20 needle.Do you have any other info to help me get it going?

[@thegearcage6595]

Hello Alexander I was wondering if you can help me with a few questions about an Adler 30 patcher. I’m very new to this and have a few questions to make sure I’m doing it right. If you can help that would be awesome! Doesn’t seem to be very much info on this machine but it looks very similar to the singer! Thanks

[@jackrosson9106]

does oil in cup on the threader ?

[@s.beyahkareem3293]

Alex , good info. thanks I have Sutton Landis 71 and I'm trying to thread it. The thread wire is hitting something. Can you help ?

[@AlexanderDyer]

I would not be afraid to try compressed air and/or a lubricating solvent like WD-40 to gently free the obstruction.

[@corneliusrobinson9745]

Thank you for the Great Video! I am currently restoring a Singer 29k72 Completely If I may ask were do you get Parts for a machine Like this one? i am just wanting to replace some of the High wearing items to try to get the machine close to original spec if possible.

[@AlexanderDyer]

You might try giving hendersonsewing.com a call. I see some OEM parts on eBay too.

[@duongoan8529]

Amazing video! How can you change the height of the pressure foot?

[@AlexanderDyer]

Thanks. Yes.

[@user-ro4ey3hw1m]

I am looking for the main tension screw for my Power Patcher machine. The screw that I have is too short. Where can I find parts for patcher machine. Thanks

[@pacmanpaquette]

I own a 29k71 of around the same vintage as yours (Hammertone paint). SN tells me its from 1958. The Darning disks can be used to wind the bobbins if you have the wheel in the front (As Mine does). The front disks are used as they are adjusted for tension independently from the top disks. These machines are popular with cobblers and shoe repair shops. My grandfather had a shop from 1960ish to 1998ish and saved a few machines when he closed down. My dad and i both inherited a machine. i still have it on the original treadle stand but it was modified with an electric motor and clutch (Done crudely in the 70's). Great machines! Hard to find parts for them and needles are getting hard to find.

[@AlexanderDyer]

Thanks for that. While some parts may be a challenge, needles are no problem, I go to eBay and search 29x3 for cloth and 29x4 for leather

[@JorgeGarcia-ns7ks]

Do you know where I can get this kind of shoe sewing machine?

[@solo7solo741]

Could you make a video on How to adjust stitch length?

[@AlexanderDyer]

I thought I put that in there.