COOL YOUR OIL! - Oil Cooler Install

[@JasonSimonSmith]

Wow .. thank you SO MUCH for sharing content like this. As a new '07/R56 owner, information like this is a GODSEND. Cheers

[@outlawedmotors]

Thanks again Jason!

[@TwoInfinityAndBeyond]

I don't track my car but I do go fast a lot. Puts a lot of stress on the engine in high outside temps.

[@Axel-gl2hy]

Glad you're Back! love your Mini Series!

[@outlawedmotors]

Axel thanks! Hopefully I’ll be around for a while :)

[@Axel-gl2hy]

of course i will. :)

[@Jj.leenard]

the best vid so far great angles and explanations!!

[@greghumble7306]

Mole grips and a Chinese adjustable spanner, what’s the point in nice anodised fittings if you’re just gonna chew them up?

[@AlphaFlight]

i learned the time installing some nice AN fittings, that the fittings dont stay nice for long, they scratch up as soon as you handle them to install,

[@jacksondyal6823]

Hey man, u need to buy an aluminium AN wrench in order to not destroy the fittings

[@ianreed4636]

There is a oil filter relocation kit available now for the mini .

[@RWWarner3608]

Really that is the best tools you could find to do this job?

[@PaulinhoThompson]

That was a really enjoyable video, thank you.

[@izwanmohd]

I don't track my car but my car having known problem that the oil cooler hose bursting out of the blue (manufacturers defect) and was never fixed by thhe company only viable solution is to remove the stock water cooled oca and replace with something else, my only concern I'm not sure if the engine still have the same oil pressure after the installation

[@tm5346]

I love my mini Thanks for the video I have noticed hot ! Ugg I’ve just noticed this winter and it’s been one hell of a terrible winter on top of Covid! 😝🤬

[@tm5346]

Love you Explanation new to your channel thanks for the videos

[@vasudevreghuram8776]

really helpful video bro!❤ really underrated

[@youtubeincorporation4571]

THIS MINI IS GOING TO BE AWESOME.

[@outlawedmotors]

Given the time I'm putting into it, I hope so too! :D

[@tro2388]

Any links for a thermostat for a 3.0L? '05 subaru h6. About to add a cooler, cannot find any thermostats. Great video!

[@fOrNaLL]

Why did you use rubber hoses instead of PTFE? Rubber lines are for fuel or power steering, maximum 100°C only

[@mathieuestibals2319]

Hey man, any chance you remember which adapter plate you used? I’m looking for one to fit a temp and pressure sensor too

[@blackduncan9812]

Thanks I was considering just slapping an oil cooler on my mini but the oil thermometer wasn't even on my mind and makes alot of since

[@williamkay3115]

Hey did you paint your heat shield or is it aftermarket….or both? Cheers, great video

[@mazpr2025]

how much was the kit?

[@mickc7939]

Great video, Is the placement of the oil cooler bad for the condenser and radiator

[@myousic934]

Hey man! Why did you stop posting!?!!?

[@danieltenorio3559]

I have a Honda civic 2012 coupe everything is factory designed besides an cold air intake (I dint tow anything )I was wondering if I need to get an oil cooler for the hot temp. In south texas Or if my car is safe enough to handle it via it’s build design? Any thing helps

[@GOMADMOTORS]

Where is the upcoming Video with the canadian solution? 😅

[@woutd4293]

Do you still have your BMW E9? Would love to see that thing again!

[@outlawedmotors]

Wout D yes, I do. I’ll be sharing soon but need to sort out some important items before I move forward

[@gavriladaniel265]

where to order the adapter

[@waterlover]

just did an install on my r53 boy was it a pain

[@al3xuk]

What brand/type is that sleave you used to give heat shielding to the braided lines

[@outlawedmotors]

All my heat shielding comes from HeatShieldProducts.com, they've been a great supporter of the channel and they're stuff hasn't let me down.

[@samheller8394]

oil cooler install for SBC

[@zainhaider6874]

Lots of love good job 👌🙏❤️

[@nnnppp720]

What is the brand of this oil cooler?

[@troywiltshire5272]

Can this be used for a remote filter locator? Since it’s such a pain to get to the stock filter location just to change the filter.

[@outlawedmotors]

Stay tuned, I have a video coming out about that. Short answer, yes but with a big asterisk. Check out @RPMPowered on Instagram. They've got an amazing kit.

[@pstaramos]

when you fill with oil during first install or oil change, the oil thermostat would be closed right? How will the oil go to the cooler? Is there a way to open it? Or you fill more oil and when the system operates everything will fill?

[@josevega7680]

Most oil thermostats do not ever fully close one way or the other. In other words, oil is ALWAYS flowing through the cooler. The thermostat just regulates how much is flowing through it. Also, he should've mounted the cooler with the fittings on top to avoid air pockets.

[@KookiDowg]

My car is not a dedicated track car and will be staying non-turbo but it will be seeing open track days and autocrosses a lot. Would you still recommend? If I do plan to go with this route, I'll be installing it in front of my a/c condensor (Yes I'm keeping ac deal with it) along with the radiator right behind of course. Sounds ideal or no? Sure my car is not being boosted, but having a peace of mind out on the track in regards to oil pressure would give me a piece of mind?

[@stevenphilips683]

Nice video do you have a list of the parts?

[@outlawedmotors]

There's an updated kit I'm using, check out @RPMpowered on instagram. I'll be sharing more soon about my updated setup.

[@Kenword69420]

is that a laurier shirt??

[@outlawedmotors]

Yes sir!

[@JuelZ925]

Will this fit on a n13?

[@1nvd]

Can your oil cooler get slightly wet from rain? Mine was smoking after I drove my Silvia in the rain

[@outlawedmotors]

It's fine for it to get wet. May be just steam? It'd be good to check for leaks.

[@agcd2196]

Hello I installed a 7 row G-Plus oil cooler on a JCW R56. I’m very happy with it. One thing it does is I can hear the oil pump whining at idle. The car throws no DTC codes. Any idea what is causing this? Thanks

[@Camhin1]

What happened to the BMW?

[@outlawedmotors]

Camhin1 I’m good time friend, in good time.

[@Sportscarbible]

E9 plz...thx

[@outlawedmotors]

Sports Car Bible I’m taking donations ✌🏼 soon enough friend

[@Enigmah88]

Vice grips on AN fittings come on bro...

[@outlawedmotors]

KiloSimeon I guess you missed the part where I said not to do what I did ;)

[@Enigmah88]

@@outlawedmotors nah I saw it, just felt like reminding you lol

[@ianbrown5868]

He can use his teeth if he feels like, it's his

[@theopinion9452]

That factory cooler was NOT enough,especially commuter driving,engines get hotter while in stop and go city traffic,if it was highway,high speed driving,that's different because the oil moves faster thru the system,thus preventing over heating of coolant,engine oil and transmission fluid.

[@kitty13kitty]

Will that heat exchange block squeeze back between the rad/support/bumper assembly and allow you to put the car into front end service mode without disconnecting / draining the oil lines?

[@outlawedmotors]

DH Johnson if you give it enough slack absolutely. You don’t loose much oil when you unhook the oil lines at the thermostat so it’s nothing to be too worried about. That being said, I typically find it easier to pull the front off when ever I need to get in there, but that may be because I’m used to doing it 100 times by now lol

[@AlphaFlight]

really good video, subs and smashed that like!|

[@vincenzobastiotto308]

Can I drive my R56 cooper s after I replaced the a/c condenser

[@outlawedmotors]

Do you mean with out it being charged? I've been doing it with no problems but I'd probably talk to a mechanic ;)

[@tm5346]

Oh my God forget it I’ll never be able to do this shit shhhh

[@tm5346]

Damn this don’t look like a DYII not for me! Shit although I’m learning slowly but surely I never thought in 1 million years I would work on a car but actually have pretty much all the tools it does seem like they come apart Like a Lego I love my mini very much 2013

[@dougmacrae9535]

using the wrong wrenches

[@outlawedmotors]

Yup! Learned my lesson - kzbin.info/www/bejne/i5CcYXyKarSZrcU

[@Stick_jitsudad808]

U didnt prime your oil kooler

[@outlawedmotors]

You don't need to prime your oil cooler, however, you do need to top up your oil once your the thermostat has opened up allowing oil to flow into the cooler to bring the oil back up to the appropriate level.

[@belovedLion80]

🇺🇸

[@AlienPizza38]

👍👍👍 🎥

[@adelelsharkawy9874]

Pravoooooo