Perfect Wheel Fitment Guide

[@grey-god]

those look like 991 GT3RS wheels. Very clean

[@user-ef3jo7of4z]

No they don’t 😂😂😂😂

[@grey-god]

@@user-ef3jo7of4z cope

[@calebplaysgamesofficial]

​@@user-ef3jo7of4zyes... they do... first issue is the gt3rs has like 8 different wheels of different colors and lookd and this does look extremely similar to one of them. Know your stuff before you speak.

[@JuanLeury]

Those are Apex Vs-5rs

[@sconartist]

It’s wild how large cars have gotten. A modern 3 series would eat 17s alive. Im running 18s (8.5 up front, 9.5 rear) on my 1st Gen IS300 and I would never go any larger based on the size of the car

[@shadowkyun]

would you happen to know the offset your rims as I wanna get some 18s on my 01 is 300 and would appreciate a reference if you may.

[@machinegunners3000]

Ikr. I was surprised how much he had to do just to make some 17s fit. My 20 GTI is on 18x8.5 with 245/40 continental tires

[@DragSlicks]

I’m running 24s on my 08’ 760LI I said fuck it I’m not doing shit but throwing the largest wheel I can to fill the wheel wells and call it a day

[@megatar3]

Idk how the newer ones are but I remember my e90 couldn’t fit huge wheels either. Definitely still bigger than the e36, but I think I went with 18x8.5 to be safe but you could squeeze 19x9 probably. I put 20x10.5 wheels on my 2012 audi s5 and it still had more room to go

[@postalpancho]

I’m running those same Khumo V730 tires. Tires offer a ton of grip and have a very stiff sidewall which works great with BMW. Only complaint is they don’t give a lot of feedback via tire noise, so it can feel quite numb. Still a really good tire for the money, better than a federal tire, and cheaper than a rt660.

[@arnavraut9691]

K dubs always look so good

[@owenpowers8306]

Those definitely rub when you hit a bump

[@nazc0]

You didn't need a whole +12 spacer. Could have gone with just a 10mm or even 5 would have been plenty for that.

[@khysor1832]

Exactly

[@garnetreecejones9222]

I was thinking the exact same thing.

[@willgurley9439]

Looks insane

[@stezenast5878]

This isn't a perfect fitment guide. This is just your fitment

[@jeremyjiawen27]

wheres your car boomer？

[@megatar3]

@@jeremyjiawen27he’s not wrong every car is different

[@2drpeppersplz]

agreed, this is "perfect fitment" for looks only. i would never do this to my car

[@Len_M.]

KW Coil overs, nice. 👍🏻

[@damienvalderrama]

Just bought a wheel, tire, and coilover setup for my car its a 2011 acura rdx the bc coilovers i bought dont have caster adjustment are these strut mounts universal

[@glocklesnar9559]

We got the same coils, KW, I had to do the same thing with the spacers I’m running MPars though atm

[@JamesLivas]

Saw some rub marks on the inner guard 🙈

[@M54B30_fan]

You bought the apex, I bought the reps from ecs for $700 vs $2000. We’re aren’t the same. One day :/ when I graduate College I can put it on my e46 zhp, and a future e46 m3 once I graduate.

[@aamaramba]

I have 17x9.5" TE37SLs on my M3, you can definitely fit wider than a 9"

[@Hole_Motorsports]

what size tire?

[@salvadorrodriguez1329]

So you can't do a flush fitment without modification on the body? I have a 2014 Challenger SRT8 and I want a flush fitment without racing the car. But how would I prevent it from rubbing against the fender when cornering or hitting bumps

[@DrivenPHPOV]

Whats the rim size and tyre that you put on that bad boy.

[@nuddahundo83]

fire my G

[@402car_kid4]

Rolling quarters and fenders is fine if it’s done correctly. But it’s not the doing the rolling that rusts cars out. It’s the after awhile when you get chips because of higher tension in the paint and less surface that it’s going to rust out and be horrible. Best to not roll if you absolutely don’t need to.

[@Gobbbbb]

Perfect fitment while driving? If not then what's the point?

[@longlostfounder]

Are the spacers permanent?

[@K.dot.03]

Is a finger tip of clearance from the back of the wheel to the strut enough? (Aired out)

[@zipsuma6971]

2-3mm is more than enough

[@arvindmahesh6103]

Rub doctor spotted!

[@nycolenguyen6688]

Use thinner spacers

[@paulhadnot1173]

@_AlexanderVargas would a 35 sidewall help?

[@brandonrobishaw7606]

Who is this professional

[@DragSlicks]

Fitment too good

[@Dior.orlando]

What coils u got

[@crimsonram77]

Idk it looks very complicated for me to ever do lol but lucky my dad is a toyota Mechanic for 30 years now

[@SurginersYT]

Made it into some e46 fenders

[@tdkyt46]

Tbh didn't look like you needed anywhere near that much spacer in the front (unless your lug bolts come loose but that's a whole different problem)

[@Akuma-ti7wi]

Could’ve changed your wheel alignment via wheel hub

[@deang8910]

Have fun rubbing on every little bump. I speak from experience

[@EZJ17MRJ15]

Take put the helper spring

[@Scrubdi]

Drake.. where's the door?

[@cryaesthetic3603]

Ehat rims are those?

[@JuanLeury]

Apex Vs-5rs

[@Thegreendingler]

What wheels are those...

[@JuanLeury]

Apex vs-5rs

[@Thegreendingler]

​@@JuanLeuryman apex wheels all look so good on e36

[@Beauloqs]

Perfect fitment to.destroy tires in 500 miles or less....props😂😂

[@shanedottie]

Yea big waste of money

[@Matthew-mt2fc]

Honestly these tires could last 10-15k as long as hes not drifting the car or doing burnouts and by rotating the tires with every oil change. Normal driving theres enough contact patch where the tires wont last very long but much longer than the obnoxious stanced cars you sometimes see. That being said, its too much camber for me 😂 theres no functional purpose of this much negative camber

[@shanedottie]

@@Matthew-mt2fc I feel like a bigger sidewall rides more comfortable too

[@tommyhairyeah7726]

camber plates or top hats. not strut mounts

[@johnytszcinco]

When you don’t know how to measure offset

[@dominikkozela9763]

You should have used smaller spacers and could have used less camber

[@bfr9thgenT]

The offset of the wheel is wrong, this is why you need a spacer for the wheel to clear the coilover 🤦‍♂️

[@papgarage]

What tires ?

[@trickysquash1563]

Kumho ecsta v730

[@playboyhj702]

My driver side is the issue 🤦🏻‍♂️ just the front

[@wirzy6133]

The car must have been absolutely a dream to drive. before the poser

[@jrod8618]

How to mess up your clean bmw instead of buying the right size fitment

[@mr_fries1]

Balls

[@khysor1832]

Could’ve used a wayyyyy smaller spacer smh 🤦

[@kaoticyclismik]

m3 = sekc

[@fila1445]

Do not roll your fenders, unless you want to have rusty fenders in couple of years

[@Grudgie]

Absolutely hate this type of mod.

[@toxicity6629]

How you can’t use KZbin bro you are a youtuber that cannot proceed to use KZbin to roll fenders bro this earth needs to be reset atp.

[@TormentedEnd]

... I'm sorry, but any use of a spacer, imo is not perfect. I do love the car

[@scooobydooatyakoozadottrip4832]

take that damn wing off you don't need a wing for a m3 i'm sorry but you DON'T

[@ishrawatisingh438]

Andrew tate copy 😂😂😂😂😂

[@lostoxicos24-78]

Garbage. The moment u add camber is a poo poo built. Get the right size wheels.

[@dat3.8ltr56]

Lame 😂😂😂😂 i didn't know a bmw could get any worse

[@BicTheLighter]

That’s semi wide lol